Foodoor-Systemd-Service; Paketinstaller fragt nach oben/unten

authentication user

.gitignore

@@ -0,0 +1 @@
+foodoord*.deb

README.md

@@ -1,58 +1,75 @@
-#foodoord
+# foodoord
 
 Das Schließsystem läuft auf einem RaspberryPi mit der Erweiterungsplatine "PiFaceDigitalIO". 
 
-##Software##
 
-###Installation###
-<code>apt-get install python-pifacedigitalio </code>
+## Konfiguration
 
-Um das Paket zu installieren muss die */etc/apt/sources.list* angepasst werden.
+Falls `/etc/foodoord.conf` nicht vorhanden ist:
 
-<code>deb http://archive.raspbian.org/raspbian wheezy main contrib non-free rpi</code>
+* `mv /etc/foodoord.conf_example /etc/foodoord.conf`
 
-<code>deb-src http://archive.raspbian.org/raspbian wheezy main contrib non-free rpi</code>
-
-Wer apt-get benutzt, kann den Raspbian Pubkey zum keyring hinzufügen.
-
-<code>wget http://archive.raspbian.org/raspbian.public.key -O - | sudo apt-key add -</code>
+1. Trage dort die API-Config für den Türstatus ein.
+2. Falls nicht schon beim Paketinstall geschehen, mit `systemctl enable --now foodoord@oben` oder `systemctl enable --now foodoord@unten` enablen und starten.
 
 
 
-###Dateiliste###
+## Software
+
+### Dateiliste
+
 Der Deamon besteht aus folgenden Dateien.
 
 * foodoor
 * foodoord
 * foodoord.conf
-* foodoord_initd
-* foodoor-ssh-wrapper
 * foodoor-update-keydb
+* foodoord@.service
 
-##Schüssel
+Zusätzlich sollte für das git-repo eine Config angelegt werden: 
 
-###Schlüsselupdate
-<pre><code>foodoor-update-keydb
-</code></pre>
+/root/.ssh/config
+```
+Host git.chaospott.de
+  User git
+  Port 2222
+  IdentityFile ~/.ssh/id_chaospott
+```
+
+Das IdentityFile ist der Deploy-SSH-Key, der im [Repo](https://git.chaospott.de/Chaospott/foodoor-keys) hinterlegt ist.
+
+
+## Schüssel
+
+### Schlüsselupdate
+
+`foodoor-update-keydb`
 Aktualisiert die die Schlüssel auf der Tür und baut die *Authorized_Keys* für die User *open* und *close*. Keys die nicht dem OpenSSH-Format mit 4096 bit entsprechen, werden ignoriert. Wenn das Script von Hand aufgerufen wird, werden die betroffenen Keys angezeigt. Über einen Cronjob werden die Keys alle **5 Min aktualisiert**.
 
-###Schlüsselformate###
+### Schlüsselformate
+
 Der foodoord akzeptiert nur Pub-Keys im *OpenSSH2-Format*. Keys lassen sich unter anderem mit OpenSSH oder PuTTygen erzeugen.
 
-###OpenSSH####
+### OpenSSH
+
+#### Keys generieren
+
+* Mit `ssh-keygen -b 4096` lassen sich Keys generieren.
+* `ssh-add $Pfad_zum_Key` fügt den Key dem ssh-Agent hinzu. Die Option `ssh-add -l` zeigt geladene Keys an.
+* `ssh-kegen -l -f $Pfad_zum_Key ` gibt den Fingerprint und andere Informationen zurück.
 
-####Keys generieren####
-* Mit <code>ssh-keygen -b 4096 </code> lassen sich Keys generieren.
-* <code>ssh-add $Pfad_zum_Key</code> fügt den Key dem ssh-Agent hinzu. Die Option <code>ssh-add -l</code> zeigt geladene Keys an.
-* <code>ssh-kegen -l -f $Pfad_zum_Key </code> gibt den Fingerprint und andere Informationen zurück.
 
 ####Keys konvertieren(PuTTy>OpenSSH):####
-* <code>ssh-keygen -i $Pfad_zum_Key > $Pfad_neuer_Pfad.pub</code> liest ssh2-kompatible Keys(RFC 4716) ein und speichert diese im OpenSSH-Format.
+
+* `ssh-keygen -i $Pfad_zum_Key > $Pfad_neuer_Pfad.pub<` liest ssh2-kompatible Keys(RFC 4716) ein und speichert diese im OpenSSH-Format.
+
 
 ###PuTTy###
+
 Da die Tür nur Keys im OpenSSH-Format verträgt, dürfen auch mit Putty nur OpenSSH-Keys genutzt werden.
 
 ###Keys generieren (OpenSSH-Format mit PuttyGen):###
+
 1. PuTTYgen öffnen
 2. Unten "Number of Bits in a generated Key:" 4096 eintippen
 3. "Generate" klicken um Key zu generieren
@@ -61,21 +78,28 @@ Da die Tür nur Keys im OpenSSH-Format verträgt, dürfen auch mit Putty nur Ope
 
 Es ist zu beachten, dass Putty den PrivateKey im Putty-Format benötigt! Das heißt, falls der generierte Key vor dem Export nicht gespeichert wurde, muss der private Key noch konvertiert werden, siehe nächster Punkt!
 
+
 ###Keys konvertieren(OpenSSH>PuTTy):###
+
 1. PuTTYgen öffnen
 2. "Load" drücken
 3. OpenSSH-Key auswählen
 4. "Save Private-Key" drücken
 5. Speichern
 
+
+
 ##Hardware
 
 ### Input:
+
 * ssh-login
 * Klingel
 * Statustaster
 
+
 ### Output:
+
 * Status LEDs
 * Summer
 * Keymatic

build-package

@@ -0,0 +1,3 @@
+#!/bin/bash
+VERSION=3.0.4
+dpkg-deb --root-owner-group -b debian foodoord_${VERSION}_all.deb 

debian/DEBIAN/control

@@ -0,0 +1,6 @@
+Package: foodoord
+Version: 3.0.4
+Maintainer: Bandie <bandie@chaospott.de>
+Architecture: all
+Description: Control the doors of the club, ja!
+Depends: dash, git, python3, pip, tmux

debian/DEBIAN/postinst

@@ -0,0 +1,35 @@
+#!/bin/bash
+echo "Creating group and users.."
+groupadd foodoor
+useradd -M -d /var/lib/foodoor/close -G foodoor -s /bin/sh close
+useradd -M -d /var/lib/foodoor/open -G foodoor -s /bin/sh open
+useradd -M -d /var/lib/foodoor/door -G foodoor -s /bin/sh door
+
+echo "Chown homes"
+for u in close open door; do
+  groupadd ${u}
+  chown ${u}:${u} /var/lib/foodoor/${u}
+done
+
+echo "Chmod foodoor"
+chmod 755 /var/lib/foodoor
+
+echo "Create /state"
+touch /state
+chown root:foodoor /state
+chmod 664 /state
+
+echo "##################"
+while [ "$prompt" != "oben" -a "$prompt" != "unten" ]; do
+ read -p "Sind wir oben oder unten? (oben, unten): " prompt
+done
+echo "##################"
+
+echo "Installing dependencies via pip: pifacecommon pifacedigitalio"
+pip install pifacecommon pifacedigitalio
+
+echo "Enabling and starting systemd-Services"
+systemctl daemon-reload
+systemctl enable foodoord@$prompt
+systemctl restart foodoord@$prompt
+systemctl status foodoord@$prompt

debian/etc/cron.d/foodoord

@@ -0,0 +1 @@
+*/5 * * * * root [ -x /usr/sbin/foodoor-update-keydb ] && /usr/sbin/foodoor-update-keydb >/dev/null 2>&1

debian/etc/foodoord.conf_example

@@ -0,0 +1,4 @@
+[doorstatus]
+status_url =
+key =
+secret =

debian/etc/systemd/system/foodoord@.service

@@ -0,0 +1,15 @@
+[Unit]
+Description=foodoord %i
+After=network-online.target
+Wants=network-online.target systemd-networkd-wait-online.service
+
+[Service]
+Type=simple
+ExecStart=/usr/sbin/foodoord_%i
+Restart=on-failure
+RestartSec=5s
+
+
+[Install]
+WantedBy=multi-user.target
+

debian/usr/sbin/foodoor

@@ -0,0 +1,37 @@
+#!/bin/sh
+set -e
+
+PIPE_PATH=/var/run/foodoord.pipe
+
+if [ ! -e $PIPE_PATH ]
+ then
+  echo "Pipe missing. Check daemon status."
+ exit 1
+fi 
+
+action="$1"
+isTriggerActivated="0"
+
+if [ -z "$action" ]
+ then
+  action="$SSH_ORIGINAL_COMMAND"
+  isTriggerActivated="1"
+fi 
+
+case $action in
+  close|open)
+    echo $action | tee $PIPE_PATH |sed 's/open/UNLOCKED/;s/close/LOCKED/' >  /state
+   ;;
+  status)
+   ;;
+  *)
+    echo "Usage: $(basename $0) { close, open, status }"
+    exit 1
+  ;;
+esac
+
+if [ $isTriggerActivated -eq 1 ]
+then
+	cat /state
+	sleep 2
+fi

debian/usr/sbin/foodoor-update-keydb

@@ -0,0 +1,63 @@
+#!/bin/bash
+set -e
+
+export PATH="/usr/bin:/bin:/usr/sbin:/sbin"
+
+dest=/var/run/foodoor-keys
+temp_outfile="$dest.tmp"
+
+
+if [ ! -e "${dest}/.git/config" ]
+then
+  #echo "Repo does not exist, trying to clone..."
+  ( cd /var/run && git clone --quiet --single-branch --depth=1 ssh://git.chaospott.de/Keyverwaltung/foodoor-keys.git "${dest}" )
+else
+  #echo "Repo exists, updating..."
+  ( cd "${dest}" && git fetch --quiet && git merge --quiet origin/master master )
+fi
+
+rm -f ${temp_outfile}
+  find "${dest}/keys" -name '*.pub' | sort | \
+    while read keyfile
+    do
+      ssh-keygen -l -f ${keyfile} &> /dev/null
+      if [ $? -eq 0 ]; then
+        valid=false
+        keyinfo=$(ssh-keygen -l -f ${keyfile}) # The whole key information
+        crypto=$(echo "${keyinfo}" | sed 's/.*(\(.*\))/\1/') # Looks like "RSA" or "ED25519"
+        key_length=$(echo "${keyinfo}" | cut -d" " -f1) 
+
+        if [ "${crypto}" == "RSA" ]; then
+
+          if [ ${key_length} -lt 4096 ]; then
+            echo "Key size of key ${keyfile} not equal to 4096. Not adding it to key database." >&2
+            continue
+          else
+            valid=true
+          fi
+
+        elif [ "${crypto}" == "ED25519" ]; then
+          valid=true
+        fi
+
+        if [ "$valid" = true ]; then
+          echo "command=\"/usr/sbin/foodoor \$action \",no-port-forwarding,no-X11-forwarding,no-agent-forwarding $(cat ${keyfile} | sed 's/\r//g') ${keyfile}" >> ${temp_outfile}
+        fi
+      fi
+    done
+
+for appendix in open close door
+do
+    action="$appendix"
+    if [ "$appendix" = "door" ]; then
+      action=""
+    fi
+    export action
+
+    outfile="${dest}/authorized_keys.${appendix}"
+    cat ${temp_outfile} |envsubst > ${outfile}
+  
+    # Oben und unten
+    install -d -o ${appendix} -g nogroup -m 0700 /var/lib/foodoor/${appendix}/.ssh
+    install -b -S .last -o ${appendix} -g nogroup -m 0600 ${outfile} /var/lib/foodoor/${appendix}/.ssh/authorized_keys
+done

debian/usr/sbin/foodoord_oben

@@ -0,0 +1,143 @@
+#!/usr/bin/env python3
+# vim: ts=2 sw=2 et
+
+import os
+import stat
+import time
+import pifacedigitalio
+import signal
+import sys
+import grp
+from configparser import ConfigParser
+
+#Read config
+parser = ConfigParser()
+parser.read('/etc/foodoord.conf')
+
+doorapi = parser.get('doorstatus', 'status_url')
+consumerkey = parser.get('doorstatus', 'key')
+consumersecret = parser.get('doorstatus', 'secret')
+
+
+#Definitions for output
+LED_RED=6
+LED_GREEN=7
+RELAYS_LOCK=0
+RELAYS_UNLOCK=1
+
+#Definitions for input
+DOOR_BELL=0
+REED_RELAYS=1 #not implementet yet 
+
+#Definitions for LEDcolor
+RED=1
+GREEN=2
+ORANGE=3
+
+
+def update_api(locked):
+    try:
+        os.system("/usr/bin/curl -XPOST --header 'Content-Type: application/json' --data '{ \"consumer_key\": \"" + consumerkey  + "\", \"consumer_secret\": \"" + consumersecret + "\", \"aerie\": " + str(locked).lower() + " }' '" + doorapi  + "' ")
+    except:
+        pass
+
+
+if __name__ == "__main__":
+
+  def doorbell(event):
+    if (STATUS):
+      pifacedigital.relays[RELAYS_UNLOCK].toggle()
+      time.sleep(2)
+      pifacedigital.relays[RELAYS_UNLOCK].toggle()
+      #print 'got doorbell'
+
+  def close_button(event):
+    global STATUS
+    STATUS = False
+    try:
+      update_api(True)
+    except:
+      pass
+
+    set_led(RED)
+
+
+  listener = pifacedigitalio.InputEventListener()
+  listener.register(0, pifacedigitalio.IODIR_RISING_EDGE, doorbell, settle_time=10)
+  listener.register(1, pifacedigitalio.IODIR_RISING_EDGE, close_button, settle_time=5)
+  listener.activate()
+
+  def signal_handler(signal, frame):
+    listener.deactivate()
+    os.remove("/var/run/foodoord.pipe")
+
+    try:
+      update_api(True)
+    except:
+      pass
+
+    set_led(RED)
+    sys.exit(0)
+
+  def set_led(color):
+    if (color==RED):
+      pifacedigital.leds[LED_RED].turn_on()
+      pifacedigital.leds[LED_GREEN].turn_off()
+
+    elif (color==GREEN):
+      pifacedigital.leds[LED_GREEN].turn_on()
+      pifacedigital.leds[LED_RED].turn_off()
+
+    elif (color==ORANGE):
+      pifacedigital.leds[LED_RED].turn_on()
+      pifacedigital.leds[LED_GREEN].turn_on()
+
+  pifacedigital = pifacedigitalio.PiFaceDigital()
+  signal.signal(signal.SIGTERM, signal_handler)
+
+  #Startsettings
+  STATUS = False
+  pifacedigital.leds[LED_RED].turn_on()
+
+  #Setting up FiFo to get sshd-output
+  try:
+    os.mkfifo("/var/run/foodoord.pipe")
+    os.chown("/var/run/foodoord.pipe", -1, grp.getgrnam('foodoor')[2])
+    os.chmod("/var/run/foodoord.pipe", stat.S_IRUSR | stat.S_IWUSR | stat.S_IRGRP | stat.S_IWGRP)
+  except OSError:
+    pass
+
+  with open("/var/run/foodoord.pipe", "r") as ssh_input:
+    while 1:
+      #Read sshd-output from pipe
+      Pipe = ssh_input.readline()[:-1]
+
+      if (Pipe == "close" and STATUS):
+        pifacedigital.relays[RELAYS_LOCK].toggle()
+        time.sleep(1)
+        pifacedigital.relays[RELAYS_LOCK].toggle()
+        STATUS = False
+
+        try:
+          update_api(True)
+        except:
+          pass
+
+        set_led(RED)
+
+      elif (Pipe == "open"):
+        pifacedigital.relays[RELAYS_UNLOCK].toggle()
+        time.sleep(2)
+        pifacedigital.relays[RELAYS_UNLOCK].toggle()
+
+        if (STATUS==False):
+
+          try:
+            update_api(False)
+          except:
+            pass
+
+        STATUS = True
+
+        set_led(GREEN)
+      time.sleep(0.1)

debian/usr/sbin/foodoord_unten

@@ -0,0 +1,97 @@
+#! /usr/bin/python3
+# vim: ts=2 sw=2 et
+
+import os
+import stat
+import time
+import signal
+import sys
+import RPi.GPIO as gpio
+import grp
+from configparser import ConfigParser
+
+#Read config
+parser = ConfigParser()
+parser.read('/etc/foodoord.conf')
+
+doorapi = parser.get('doorstatus', 'status_url')
+consumerkey = parser.get('doorstatus', 'key')
+consumersecret = parser.get('doorstatus', 'secret')
+
+#Definitions for output
+LED_RED=6
+LED_GREEN=7
+RELAYS_LOCK=0
+RELAYS_UNLOCK=1
+PIN_OPEN=24
+PIN_CLOSE=27
+#Definitions for input
+DOOR_BELL=0
+REED_RELAYS=1 #not implementet yet
+
+#Definitions for LEDcolor
+RED=1
+GREEN=2
+ORANGE=3
+
+
+
+def write_state(state):
+  try:
+    handle = open("/tmp/door_state", "w")
+    handle.write(state)
+    handle.close()
+  except:
+    pass
+
+
+def update_api(locked):
+  try:
+    os.system("/usr/bin/curl -XPOST --header 'Content-Type: application/json' --data '{ \"consumer_key\": \"" + consumerkey  + "\", \"consumer_secret\": \"" + consumersecret + "\", \"cellar\": " + str(locked).lower() + " }' '" + doorapi  + "' ")
+  except:
+    pass
+
+if __name__ == "__main__":
+    
+  #Startsettings
+  STATUS=False
+  gpio.setmode(gpio.BCM)
+  gpio.setup(PIN_OPEN, gpio.OUT)
+  gpio.setup(PIN_CLOSE, gpio.OUT)
+  #Setting up FiFo to get sshd-output
+  try:
+    os.mkfifo("/var/run/foodoord.pipe")
+    os.chown("/var/run/foodoord.pipe", -1, grp.getgrnam('foodoor')[2])
+    os.chmod("/var/run/foodoord.pipe", stat.S_IRUSR | stat.S_IWUSR | stat.S_IRGRP | stat.S_IWGRP)
+  except OSError:
+    pass
+
+  with open("/var/run/foodoord.pipe", "r") as ssh_input:
+    while 1:
+      #Read sshd-output from pipe
+      Pipe = ssh_input.readline()[:-1]
+
+      if (Pipe == "close"):
+        gpio.output(PIN_CLOSE,1)
+        time.sleep(1)
+        gpio.output(PIN_CLOSE,0)
+
+        write_state("closed")
+        update_api(True)
+
+
+      elif (Pipe == "open"):
+
+        #Locking
+        gpio.output(PIN_OPEN,1)
+        time.sleep(1)
+        gpio.output(PIN_OPEN,0)
+
+        #Save State
+        write_state("open")
+
+        #Status Update
+        update_api(False)
+                
+      time.sleep(0.2)
+

foodoor

@@ -1,23 +0,0 @@
-#!/bin/sh
-set -e
-
-PIPE_PATH=/var/run/foodoord.pipe
-
-if [ ! -e $PIPE_PATH ]
- then
-  echo "Pipe missing. Check daemon status."
- exit 1
-fi 
-
-case $1 in
-  close)
-    echo close > $PIPE_PATH
-   ;;
-  open)
-    echo open > $PIPE_PATH
-   ;;
-  *)
-    echo "Usage: $(basename $0) { close, open}"
-    exit 1
-   ;;
-esac

foodoor-ssh-wrapper

@@ -1,2 +0,0 @@
-#!/bin/sh
-ssh -i /root/.ssh/id_rsa_gitlab_deploy $1 $2

foodoor-update-keydb

@@ -1,38 +0,0 @@
-#!/bin/sh
-set -e
-
-export PATH="/usr/bin:/bin:/usr/sbin:/sbin"
-export GIT_SSH="/usr/sbin/foodoor-ssh-wrapper"
-
-dest=/var/run/foodoor-keys
-
-if [ ! -e "${dest}/.git/config" ]
-then
-    #echo "Repo does not exist, trying to clone..."
-    ( cd /var/run && git clone --quiet --single-branch --depth=1 luftschleuse@nordstern.chaospott.de:/home/luftschleuse/foodoor-keys "${dest}" )
-else
-    #echo "Repo exists, updating..."
-    ( cd "${dest}" && git fetch --quiet && git merge --quiet origin/master master )
-fi
-
-for action in open close
-do
-    outfile="${dest}/authorized_keys.${action}"
-    rm -f ${outfile}
-    find "${dest}/keys" -name '*.pub' | sort | \
-        while read keyfile
-        do
-            valid_key=$(ssh-keygen -l -f ${keyfile})
-            if [ "$?" -eq "0" ]; then
-                if [ $(echo "${valid_key}" | cut -d" " -f1) -lt "4096" ]; then
-                    echo "Size of key ${keyfile} is less than 4096. Not adding it to key database." >&2
-                    continue
-                fi
-            fi
-            printf "command=\"/usr/sbin/foodoor ${action}\",no-port-forwarding,no-X11-forwarding,no-agent-forwarding " >> ${outfile}
-            cat "${keyfile}" >> ${outfile}
-            echo >> ${outfile}
-        done
-    install -d -o ${action} -g nogroup -m 0700 /var/lib/foodoor/${action}/.ssh
-    install -b -S .last -o ${action} -g nogroup -m 0600 ${outfile} /var/lib/foodoor/${action}/.ssh/authorized_keys
-done

foodoord

@@ -1,140 +0,0 @@
-#!/usr/bin/env python2
-
-import os
-import stat
-import time
-import pifacedigitalio
-import urllib2
-import signal
-import sys
-import grp
-from ConfigParser import SafeConfigParser
-
-#Read config
-parser = SafeConfigParser()
-parser.read('/etc/foodoord.conf')
-
-url = parser.get('door_firstlevel', 'status_url')
-old_api = parser.get('door_firstlevel_old', 'status_url')
-
-
-#Definitions for output
-LED_RED=6
-LED_GREEN=7
-RELAYS_LOCK=0
-RELAYS_UNLOCK=1
-
-#Definitions for input
-DOOR_BELL=0
-REED_RELAYS=1 #not implementet yet 
-
-#Definitions for LEDcolor
-RED=1
-GREEN=2
-ORANGE=3
-
-if __name__ == "__main__":
-
-	
-
-	def doorbell(event):
-		if (STATUS):
-			pifacedigital.relays[RELAYS_UNLOCK].toggle()
-			time.sleep(2)
-			pifacedigital.relays[RELAYS_UNLOCK].toggle()
-			#print 'got doorbell'
-
-	def close_button(event):
-		global STATUS 
-		STATUS = False
-		try:
-			urllib2.urlopen(url+'&door=aerie&locked=1', timeout=2)
-			urllib2.urlopen(old_api+'&status=closed', timeout=2)
-		except:
-			pass
-
-		set_led(RED)
-
-
-	listener = pifacedigitalio.InputEventListener()
-	listener.register(0, pifacedigitalio.IODIR_RISING_EDGE, doorbell, settle_time=10)
-	listener.register(1, pifacedigitalio.IODIR_RISING_EDGE, close_button, settle_time=5)
-	listener.activate()
-
-	def signal_handler(signal, frame):
-		listener.deactivate()
-		os.remove("/var/run/foodoord.pipe")
-
-		try:
-			urllib2.urlopen(url+'&door=aerie&locked=1', timeout=2)
-			urllib2.urlopen(old_api+'&status=closed', timeout=2)
-		except:
-			pass
-				
-		set_led(RED)
-		sys.exit(0)
-
-	def set_led(color):
-		if (color==RED):
-			pifacedigital.leds[LED_RED].turn_on()
-			pifacedigital.leds[LED_GREEN].turn_off()
-
-		elif (color==GREEN):
-			pifacedigital.leds[LED_GREEN].turn_on()
-			pifacedigital.leds[LED_RED].turn_off()
-
-		elif (color==ORANGE):
-			pifacedigital.leds[LED_RED].turn_on()
-			pifacedigital.leds[LED_GREEN].turn_on()
-
-	pifacedigital = pifacedigitalio.PiFaceDigital()
-	signal.signal(signal.SIGTERM, signal_handler)
-
-	#Startsettings 
-	STATUS = False
-	pifacedigital.leds[LED_RED].turn_on()
-
-	#Setting up FiFo to get sshd-output
-	try:
-		os.mkfifo("/var/run/foodoord.pipe")
-		os.chown("/var/run/foodoord.pipe", -1, grp.getgrnam('foodoor')[2])
-		os.chmod("/var/run/foodoord.pipe", stat.S_IRUSR | stat.S_IWUSR | stat.S_IRGRP | stat.S_IWGRP)
-	except OSError:
-		pass
-
-	with open("/var/run/foodoord.pipe", "r") as ssh_input:
-		while 1:
-			#Read sshd-output from pipe 
-			Pipe = ssh_input.readline()[:-1]
-		
-			if (Pipe == "close" and STATUS):
-				pifacedigital.relays[RELAYS_LOCK].toggle()
-				time.sleep(1)
-				pifacedigital.relays[RELAYS_LOCK].toggle()
-				STATUS = False
-
-				try:
-					urllib2.urlopen(url+'&door=aerie&locked=1', timeout=2)
-					urllib2.urlopen(old_api+'&status=closed', timeout=2)
-				except:
-					pass
-				
-				set_led(RED)
-
-			elif (Pipe == "open"):
-				pifacedigital.relays[RELAYS_UNLOCK].toggle()
-				time.sleep(2)
-				pifacedigital.relays[RELAYS_UNLOCK].toggle()
-
-				if (STATUS==False):
-					
-					try:
-						urllib2.urlopen(url+'&door=aerie&locked=0', timeout=2)
-						urllib2.urlopen(old_api+'&status=open', timeout=2)
-					except:
-						pass
-
-				STATUS = True
-				
-				set_led(GREEN)
-			time.sleep(0.1)

foodoord.conf

@@ -1,5 +0,0 @@
-[door_firstlevel_old]
-status_url =
-
-[door_firstlevel]
-status_url = 

foodoord_initd

@@ -1,155 +0,0 @@
-#! /bin/sh
-### BEGIN INIT INFO
-# Provides:          foodoor
-# Required-Start:    $remote_fs $syslog
-# Required-Stop:     $remote_fs $syslog
-# Default-Start:     2 3 4 5
-# Default-Stop:      0 1 6
-# Short-Description: foodoor initscript
-# Description:       Daemon to lock and unlock the foodoor
-### END INIT INFO
-
-# Author: gammlaa <gammlaa@die-foobar.de>
-
-# Do NOT "set -e"
-
-# PATH should only include /usr/* if it runs after the mountnfs.sh script
-PATH=/sbin:/usr/sbin:/bin:/usr/bin
-DESC="foodoor daemon"
-NAME=foodoord
-DAEMON=/usr/sbin/$NAME
-#DAEMON_ARGS="--options args"
-PIDFILE=/var/run/$NAME.pid
-SCRIPTNAME=/etc/init.d/$NAME
-
-# Exit if the package is not installed
-[ -x "$DAEMON" ] || exit 0
-
-# Read configuration variable file if it is present
-[ -r /etc/default/$NAME ] && . /etc/default/$NAME
-
-# Load the VERBOSE setting and other rcS variables
-. /lib/init/vars.sh
-
-# Define LSB log_* functions.
-# Depend on lsb-base (>= 3.2-14) to ensure that this file is present
-# and status_of_proc is working.
-. /lib/lsb/init-functions
-
-#
-# Function that starts the daemon/service
-#
-do_start()
-{
-	# Return
-	#   0 if daemon has been started
-	#   1 if daemon was already running
-	#   2 if daemon could not be started
-	start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
-		|| return 1
-	start-stop-daemon --start --quiet --background --make-pidfile --pidfile $PIDFILE --exec $DAEMON -- \
-		$DAEMON_ARGS \
-		|| return 2
-	# Add code here, if necessary, that waits for the process to be ready
-	# to handle requests from services started subsequently which depend
-	# on this one.  As a last resort, sleep for some time.
-}
-
-#
-# Function that stops the daemon/service
-#
-do_stop()
-{
-	# Return
-	#   0 if daemon has been stopped
-	#   1 if daemon was already stopped
-	#   2 if daemon could not be stopped
-	#   other if a failure occurred
-	start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name python2
-	RETVAL="$?"
-	[ "$RETVAL" = 2 ] && return 2
-	# Wait for children to finish too if this is a daemon that forks
-	# and if the daemon is only ever run from this initscript.
-	# If the above conditions are not satisfied then add some other code
-	# that waits for the process to drop all resources that could be
-	# needed by services started subsequently.  A last resort is to
-	# sleep for some time.
-	start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --pidfile $PIDFILE --exec $DAEMON
-	[ "$?" = 2 ] && return 2
-	# Many daemons don't delete their pidfiles when they exit.
-	rm -f $PIDFILE
-	return "$RETVAL"
-}
-
-#
-# Function that sends a SIGHUP to the daemon/service
-#
-do_reload() {
-	#
-	# If the daemon can reload its configuration without
-	# restarting (for example, when it is sent a SIGHUP),
-	# then implement that here.
-	#
-	start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME
-	return 0
-}
-
-case "$1" in
-  start)
-	[ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
-	do_start
-	case "$?" in
-		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
-		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
-	esac
-	;;
-  stop)
-	[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
-	do_stop
-	case "$?" in
-		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
-		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
-	esac
-	;;
-  status)
-	status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
-	;;
-  #reload|force-reload)
-	#
-	# If do_reload() is not implemented then leave this commented out
-	# and leave 'force-reload' as an alias for 'restart'.
-	#
-	#log_daemon_msg "Reloading $DESC" "$NAME"
-	#do_reload
-	#log_end_msg $?
-	#;;
-  restart|force-reload)
-	#
-	# If the "reload" option is implemented then remove the
-	# 'force-reload' alias
-	#
-	log_daemon_msg "Restarting $DESC" "$NAME"
-	do_stop
-	case "$?" in
-	  0|1)
-		do_start
-		case "$?" in
-			0) log_end_msg 0 ;;
-			1) log_end_msg 1 ;; # Old process is still running
-			*) log_end_msg 1 ;; # Failed to start
-		esac
-		;;
-	  *)
-		# Failed to stop
-		log_end_msg 1
-		;;
-	esac
-	;;
-  *)
-	#echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
-	echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
-	exit 3
-	;;
-esac
-
-: