40 lines
1.0 KiB
Markdown
40 lines
1.0 KiB
Markdown
# Wi-Fi Printer
|
|
|
|
This project prints all SSIDs, MAC addresses, and their vendors on a thermal printer using a Wi-Fi adaptor in monitor mode.
|
|
|
|
|
|
## Overview
|
|
|
|
|
|
|
|
|
|
## Usage
|
|
1. Setup a Raspberry Pi with Raspbian/Raspberry OS
|
|
2. Connect to Internet
|
|
3. Run ``install.sh``-Script
|
|
4. Wait
|
|
5. Set up for further usage, i.e.:
|
|
* Remove Internet connectivity (not needed anymore)
|
|
* Connect printer and Wi-Fi adaptor
|
|
* Include everything into nice device :)
|
|
|
|
## Important
|
|
* You might need to adapt the printer configuration in ``cms.py`` depending on the printer you use
|
|
* You might need to change the name of the network adaptor in ``install.sh``
|
|
|
|
## Tips
|
|
For a headless install you need to
|
|
* Enable SSH: ``touch <sd-card>/boot/ssh``
|
|
* Configure Wi-Fi: Create file ``<sd-card>/boot/wpa_supplicant.conf``. This repository contains a configuration file for Freifunk.
|
|
|
|
country=DE
|
|
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
|
|
update_config=1
|
|
|
|
network={
|
|
ssid="NETWORK-NAME"
|
|
psk="NETWORK-PASSWORD"
|
|
}
|
|
|
|
|