Foodoor-Systemd-Service; Paketinstaller fragt nach oben/unten

README.md

@@ -10,7 +10,7 @@ Falls `/etc/foodoord.conf` nicht vorhanden ist:
 * `mv /etc/foodoord.conf_example /etc/foodoord.conf`
 
 1. Trage dort die API-Config für den Türstatus ein.
-2. Sind wir oben oder unten? Diese Information in `where` eintragen. Also bspw. `where = oben`.
+2. Falls nicht schon beim Paketinstall geschehen, mit `systemctl enable --now foodoord@oben` oder `systemctl enable --now foodoord@unten` enablen und starten.
 
 
 
@@ -23,8 +23,8 @@ Der Deamon besteht aus folgenden Dateien.
 * foodoor
 * foodoord
 * foodoord.conf
-* foodoord_initd
 * foodoor-update-keydb
+* foodoord@.service
 
 Zusätzlich sollte für das git-repo eine Config angelegt werden: 
 

build-package

@@ -1,3 +1,3 @@
 #!/bin/bash
-VERSION=3.0.3
+VERSION=3.0.4
 dpkg-deb --root-owner-group -b debian foodoord_${VERSION}_all.deb 

debian/DEBIAN/control

@@ -1,6 +1,6 @@
 Package: foodoord
-Version: 3.0.3
+Version: 3.0.4
 Maintainer: Bandie <bandie@chaospott.de>
 Architecture: all
 Description: Control the doors of the club, ja!
-Depends: dash, git, python3
+Depends: dash, git, python3, pip, tmux

debian/DEBIAN/postinst

@@ -1,5 +1,4 @@
 #!/bin/bash
-set -x
 echo "Creating group and users.."
 groupadd foodoor
 useradd -M -d /var/lib/foodoor/close -G foodoor -s /bin/sh close
@@ -12,11 +11,25 @@ for u in close open door; do
   chown ${u}:${u} /var/lib/foodoor/${u}
 done
 
+echo "Chmod foodoor"
+chmod 755 /var/lib/foodoor
+
 echo "Create /state"
 touch /state
 chown root:foodoor /state
 chmod 664 /state
 
+echo "##################"
+while [ "$prompt" != "oben" -a "$prompt" != "unten" ]; do
+ read -p "Sind wir oben oder unten? (oben, unten): " prompt
+done
+echo "##################"
+
+echo "Installing dependencies via pip: pifacecommon pifacedigitalio"
+pip install pifacecommon pifacedigitalio
+
+echo "Enabling and starting systemd-Services"
 systemctl daemon-reload
-systemctl enable foodoord
+systemctl enable foodoord@$prompt
-systemctl restart foodoord
+systemctl restart foodoord@$prompt
+systemctl status foodoord@$prompt

debian/etc/foodoord.conf_example

@@ -2,7 +2,3 @@
 status_url =
 key =
 secret =
-
-[foodoord]
-# oben or unten
-where=

debian/etc/init.d/foodoord

@@ -1,156 +0,0 @@
-#! /bin/sh
-### BEGIN INIT INFO
-# Provides:          foodoor
-# Required-Start:    $remote_fs $syslog
-# Required-Stop:     $remote_fs $syslog
-# Default-Start:     2 3 4 5
-# Default-Stop:      0 1 6
-# Short-Description: foodoor initscript
-# Description:       Daemon to lock and unlock the foodoor
-### END INIT INFO
-
-# Author: gammlaa <gammlaa@die-foobar.de>
-
-# Do NOT "set -e"
-
-# PATH should only include /usr/* if it runs after the mountnfs.sh script
-PATH=/sbin:/usr/sbin:/bin:/usr/bin
-DESC="foodoor daemon"
-WHERE=$(cat /etc/foodoord.conf | grep 'where' | awk -F '=' '{ print $2 }' | tr -d ' ')
-NAME=foodoord_${WHERE}
-DAEMON=/usr/sbin/$NAME
-#DAEMON_ARGS="--options args"
-PIDFILE=/var/run/$NAME.pid
-SCRIPTNAME=/etc/init.d/$NAME
-
-# Exit if the package is not installed
-[ -x "$DAEMON" ] || exit 0
-
-# Read configuration variable file if it is present
-[ -r /etc/default/$NAME ] && . /etc/default/$NAME
-
-# Load the VERBOSE setting and other rcS variables
-. /lib/init/vars.sh
-
-# Define LSB log_* functions.
-# Depend on lsb-base (>= 3.2-14) to ensure that this file is present
-# and status_of_proc is working.
-. /lib/lsb/init-functions
-
-#
-# Function that starts the daemon/service
-#
-do_start()
-{
-	# Return
-	#   0 if daemon has been started
-	#   1 if daemon was already running
-	#   2 if daemon could not be started
-	start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
-		|| return 1
-	start-stop-daemon --start --quiet --background --make-pidfile --pidfile $PIDFILE --exec $DAEMON -- \
-		$DAEMON_ARGS \
-		|| return 2
-	# Add code here, if necessary, that waits for the process to be ready
-	# to handle requests from services started subsequently which depend
-	# on this one.  As a last resort, sleep for some time.
-}
-
-#
-# Function that stops the daemon/service
-#
-do_stop()
-{
-	# Return
-	#   0 if daemon has been stopped
-	#   1 if daemon was already stopped
-	#   2 if daemon could not be stopped
-	#   other if a failure occurred
-	start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name python2
-	RETVAL="$?"
-	[ "$RETVAL" = 2 ] && return 2
-	# Wait for children to finish too if this is a daemon that forks
-	# and if the daemon is only ever run from this initscript.
-	# If the above conditions are not satisfied then add some other code
-	# that waits for the process to drop all resources that could be
-	# needed by services started subsequently.  A last resort is to
-	# sleep for some time.
-	start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --pidfile $PIDFILE --exec $DAEMON
-	[ "$?" = 2 ] && return 2
-	# Many daemons don't delete their pidfiles when they exit.
-	rm -f $PIDFILE
-	return "$RETVAL"
-}
-
-#
-# Function that sends a SIGHUP to the daemon/service
-#
-do_reload() {
-	#
-	# If the daemon can reload its configuration without
-	# restarting (for example, when it is sent a SIGHUP),
-	# then implement that here.
-	#
-	start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME
-	return 0
-}
-
-case "$1" in
-  start)
-	[ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
-	do_start
-	case "$?" in
-		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
-		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
-	esac
-	;;
-  stop)
-	[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
-	do_stop
-	case "$?" in
-		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
-		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
-	esac
-	;;
-  status)
-	status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
-	;;
-  #reload|force-reload)
-	#
-	# If do_reload() is not implemented then leave this commented out
-	# and leave 'force-reload' as an alias for 'restart'.
-	#
-	#log_daemon_msg "Reloading $DESC" "$NAME"
-	#do_reload
-	#log_end_msg $?
-	#;;
-  restart|force-reload)
-	#
-	# If the "reload" option is implemented then remove the
-	# 'force-reload' alias
-	#
-	log_daemon_msg "Restarting $DESC" "$NAME"
-	do_stop
-	case "$?" in
-	  0|1)
-		do_start
-		case "$?" in
-			0) log_end_msg 0 ;;
-			1) log_end_msg 1 ;; # Old process is still running
-			*) log_end_msg 1 ;; # Failed to start
-		esac
-		;;
-	  *)
-		# Failed to stop
-		log_end_msg 1
-		;;
-	esac
-	;;
-  *)
-	#echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
-	echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
-	exit 3
-	;;
-esac
-
-:

debian/etc/systemd/system/foodoord@.service

@@ -0,0 +1,15 @@
+[Unit]
+Description=foodoord %i
+After=network-online.target
+Wants=network-online.target systemd-networkd-wait-online.service
+
+[Service]
+Type=simple
+ExecStart=/usr/sbin/foodoord_%i
+Restart=on-failure
+RestartSec=5s
+
+
+[Install]
+WantedBy=multi-user.target
+