100 lines
4.3 KiB
Plaintext
100 lines
4.3 KiB
Plaintext
* Qualcomm MSM FD
|
|
|
|
Face detection hardware block.
|
|
The Face Detection Hardware Block will offload processing
|
|
on the host and also reduce power consumption.
|
|
Supports:
|
|
Front and back camera face detection concurrently.
|
|
Sizes: QVGA, VGA, WQVGA, WVGA at 20 pix minimum face size.
|
|
|
|
Required properties:
|
|
|
|
- compatible:
|
|
- "qcom,face-detection"
|
|
- reg: offset and length of the register set for the device.
|
|
- reg-names: should specify relevant names to each reg property defined.
|
|
- "fd_core" - FD CORE hardware register set.
|
|
- "fd_misc" - FD MISC hardware register set.
|
|
- "fd_vbif" - FD VBIF hardware register set.
|
|
- interrupts: should contain the fd interrupts. From fd cores with
|
|
revisions 0x10010000 and higher, power collapse sequence is required.
|
|
Face detection misc irq is needed to perform power collapse.
|
|
- interrupt-names: should specify relevant names to each interrupts
|
|
property defined.
|
|
- vdd-supply: phandle to GDSC regulator controlling face detection hw.
|
|
- clocks: list of entries each of which contains:
|
|
- phandle to the clock controller.
|
|
- macro containing clock's name in hardware.
|
|
- clock-names: should specify relevant names to each clocks
|
|
property defined.
|
|
|
|
Optional properties:
|
|
|
|
- clock-rates: should specify clock rates in Hz to each clocks
|
|
property defined.
|
|
If we want to have different operating clock frequencies we can define
|
|
rate levels. They should be defined in incremental order.
|
|
- qcom,bus-bandwidth-vectors: Specifies instant and average bus bandwidth
|
|
vectors per clock rate.
|
|
Each of entries contains:
|
|
- ab. Average bus bandwidth (Bps).
|
|
- ib. Instantaneous bus bandwidth (Bps).
|
|
- mmagic-vdd-supply: phandle to GDSC regulator controlling mmagic.
|
|
- camss-vdd-supply: phandle to GDSC regulator controlling camss.
|
|
- qcom,fd-core-reg-settings: relative address offsets and value pairs for
|
|
FD CORE registers and bit mask.
|
|
Format: <reg_addr_offset reg_value reg_mask>
|
|
- qcom,fd-misc-reg-settings: relative address offsets and value pairs for
|
|
FD MISC registers and bit mask.
|
|
Format: <reg_addr_offset reg_value reg_mask>
|
|
- qcom,fd-vbif-reg-settings: relative address offsets and value pairs for
|
|
FD VBIF registers and bit mask.
|
|
Format: <reg_addr_offset reg_value reg_mask>
|
|
|
|
Example:
|
|
|
|
qcom,fd@fd878000 {
|
|
compatible = "qcom,face-detection";
|
|
reg = <0xfd878000 0x800>,
|
|
<0xfd87c000 0x800>,
|
|
<0xfd860000 0x1000>;
|
|
reg-names = "fd_core", "fd_misc", "fd_vbif";
|
|
interrupts = <0 316 0>;
|
|
interrupt-names = "fd";
|
|
mmagic-vdd-supply = <&gdsc_mmagic_camss>;
|
|
camss-vdd-supply = <&gdsc_camss_top>;
|
|
vdd-supply = <&gdsc_fd>;
|
|
qcom,vdd-names = "mmagic-vdd", "camss-vdd", "vdd";
|
|
clocks = <&clock_mmss clk_mmss_mmagic_ahb_clk>,
|
|
<&clock_gcc clk_mmssnoc_axi_clk>,
|
|
<&clock_mmss clk_mmagic_camss_axi_clk>,
|
|
<&clock_mmss clk_camss_top_ahb_clk>,
|
|
<&clock_mmss clk_fd_core_clk_src>,
|
|
<&clock_mmss clk_fd_core_clk>,
|
|
<&clock_mmss clk_fd_core_uar_clk>,
|
|
<&clock_mmss clk_fd_ahb_clk>,
|
|
<&clock_mmss clk_smmu_cpp_axi_clk>,
|
|
<&clock_mmss clk_camss_ahb_clk>,
|
|
<&clock_mmss clk_camss_cpp_axi_clk>,
|
|
<&clock_mmss clk_camss_cpp_vbif_ahb_clk>,
|
|
<&clock_mmss clk_smmu_cpp_ahb_clk>;
|
|
clock-names = "mmss_mmagic_ahb_clk", "mmssnoc_axi_clk" ,
|
|
"mmagic_camss_axi_clk", "camss_top_ahb_clk",
|
|
"fd_core_clk_src", "fd_core_clk",
|
|
"fd_core_uar_clk", "fd_ahb_clk",
|
|
"smmu_cpp_axi_clk", "camss_ahb_clk",
|
|
"camss_cpp_axi_clk", "cpp_vbif_ahb_clk",
|
|
"smmu_cpp_ahb_clk";
|
|
clock-rates = <0 0 0 0 400000000 400000000 400000000 80000000 0 0 0 0 0>;
|
|
qcom,bus-bandwidth-vectors = <13000000 13000000>,
|
|
<45000000 45000000>,
|
|
<90000000 90000000>;
|
|
qcom,fd-vbif-reg-settings = <0x20 0x10000000 0x30000000>,
|
|
<0x24 0x10000000 0x30000000>,
|
|
<0x28 0x10000000 0x30000000>,
|
|
<0x2c 0x10000000 0x30000000>;
|
|
qcom,fd-misc-reg-settings = <0x20 0x2 0x3>,
|
|
<0x24 0x2 0x3>;
|
|
qcom,fd-core-reg-settings = <0x8 0x20 0xffffffff>;
|
|
};
|