103 lines
3.9 KiB
Plaintext
103 lines
3.9 KiB
Plaintext
Qualcomm MDSS pll for DSI/EDP/HDMI
|
|
|
|
mdss-pll is a pll controller device which supports pll devices that
|
|
are compatable with MIPI display serial interface specification,
|
|
HDMI and edp.
|
|
|
|
Required properties:
|
|
- compatible: Compatible name used in the driver. Should be one of:
|
|
"qcom,mdss_dsi_pll_8916", "qcom,mdss_dsi_pll_8939",
|
|
"qcom,mdss_dsi_pll_8974", "qcom,mdss_dsi_pll_8994",
|
|
"qcom,mdss_dsi_pll_8994", "qcom,mdss_dsi_pll_8909",
|
|
"qcom,mdss_hdmi_pll", "qcom,mdss_hdmi_pll_8994",
|
|
"qcom,mdss_dsi_pll_8992", "qcom,mdss_hdmi_pll_8992",
|
|
"qcom,mdss_dsi_pll_8996", "qcom,mdss_hdmi_pll_8996",
|
|
"qcom,mdss_hdmi_pll_8996_v2", "qcom,mdss_dsi_pll_8996_v2",
|
|
"qcom,mdss_hdmi_pll_8996_v3", "qcom,mdss_dsi_pll_8952",
|
|
"qcom,mdss_dsi_pll_8937", "qcom,mdss_hdmi_pll_8996_v3_1p8",
|
|
"qcom,mdss_dsi_pll_titanium"
|
|
- cell-index: Specifies the controller used
|
|
- reg: offset and length of the register set for the device.
|
|
- reg-names : names to refer to register sets related to this device
|
|
- gdsc-supply: Phandle for gdsc regulator device node.
|
|
- vddio-supply: Phandle for vddio regulator device node.
|
|
- clocks: List of Phandles for clock device nodes
|
|
needed by the device.
|
|
- clock-names: List of clock names needed by the device.
|
|
- clock-rate: List of clock rates in Hz.
|
|
|
|
Optional properties:
|
|
- label: A string used to describe the driver used.
|
|
- vcca-supply: Phandle for vcca regulator device node.
|
|
|
|
|
|
- qcom,dsi-pll-ssc-en: Boolean property to indicate that ssc is enabled.
|
|
- qcom,dsi-pll-ssc-mode: Spread-spectrum clocking. It can be either "down-spread"
|
|
or "center-spread". Default is "down-spread" if it is not specified.
|
|
- qcom,ssc-frequency-hz: Integer property to specify the spread frequency
|
|
to be programmed for the SSC.
|
|
- qcom,ssc-ppm: Integer property to specify the Parts per Million
|
|
value of SSC.
|
|
|
|
- qcom,platform-supply-entries: A node that lists the elements of the supply. There
|
|
can be more than one instance of this binding,
|
|
in which case the entry would be appended with
|
|
the supply entry index.
|
|
e.g. qcom,platform-supply-entry@0
|
|
- reg: offset and length of the register set for the device.
|
|
-- qcom,supply-name: name of the supply (vdd/vdda/vddio)
|
|
-- qcom,supply-min-voltage: minimum voltage level (uV)
|
|
-- qcom,supply-max-voltage: maximum voltage level (uV)
|
|
-- qcom,supply-enable-load: load drawn (uA) from enabled supply
|
|
-- qcom,supply-disable-load: load drawn (uA) from disabled supply
|
|
-- qcom,supply-pre-on-sleep: time to sleep (ms) before turning on
|
|
-- qcom,supply-post-on-sleep: time to sleep (ms) after turning on
|
|
-- qcom,supply-pre-off-sleep: time to sleep (ms) before turning off
|
|
-- qcom,supply-post-off-sleep: time to sleep (ms) after turning off
|
|
|
|
Example:
|
|
mdss_dsi0_pll: qcom,mdss_dsi_pll@fd922A00 {
|
|
compatible = "qcom,mdss_dsi_pll_8974";
|
|
label = "MDSS DSI 0 PLL";
|
|
cell-index = <0>;
|
|
|
|
reg = <0xfd922A00 0xD4>,
|
|
<0xfd922900 0x64>,
|
|
<0xfd8c2300 0x8>;
|
|
reg-names = "pll_base", "dynamic_pll_base", "gdsc_base";
|
|
gdsc-supply = <&gdsc_mdss>;
|
|
vddio-supply = <&pm8941_l12>;
|
|
vcca-supply = <&pm8941_l28>;
|
|
|
|
clocks = <&clock_gcc clk_gcc_mdss_mdp_clk>,
|
|
<&clock_gcc clk_gcc_mdss_ahb_clk>,
|
|
<&clock_gcc clk_gcc_mdss_axi_clk>;
|
|
clock-names = "mdp_core_clk", "iface_clk", "bus_clk";
|
|
clock-rate = <0>, <0>, <0>;
|
|
|
|
qcom,dsi-pll-slave;
|
|
qcom,dsi-pll-ssc-en;
|
|
qcom,dsi-pll-ssc-mode = "down-spread";
|
|
qcom,ssc-frequency-hz = <30000>;
|
|
qcom,ssc-ppm = <5000>;
|
|
|
|
qcom,platform-supply-entries {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
qcom,platform-supply-entry@0 {
|
|
reg = <0>;
|
|
qcom,supply-name = "vddio";
|
|
qcom,supply-min-voltage = <1800000>;
|
|
qcom,supply-max-voltage = <1800000>;
|
|
qcom,supply-enable-load = <100000>;
|
|
qcom,supply-disable-load = <100>;
|
|
qcom,supply-pre-on-sleep = <0>;
|
|
qcom,supply-post-on-sleep = <20>;
|
|
qcom,supply-pre-off-sleep = <0>;
|
|
qcom,supply-post-off-sleep = <0>;
|
|
};
|
|
};
|
|
};
|
|
|