38 lines
1.5 KiB
Plaintext
38 lines
1.5 KiB
Plaintext
* MSM PM-8x60
|
|
|
|
PM-8x60 is the low power management device for MSM (Snapdragon class) chipsets.
|
|
This device sets up different components to do low power modes and registers with
|
|
the kernel to be notified of idle and suspend states and when called, follows
|
|
through the set of instructions in putting the application cores to the lowest
|
|
power mode possible.
|
|
The PC debug counter reserves 16 registers in the IMEM memory space which maintains
|
|
a count on the state of power collapse on each core. This count will be useful to
|
|
debug the power collapse state on each core.
|
|
|
|
The required properties for PM-8x60 are:
|
|
|
|
- compatible: "qcom,pm-8x60"
|
|
|
|
The optional properties are:
|
|
|
|
- reg: physical IMEM address reserved for PC counters and the size
|
|
- qcom,use-sync-timer: Indicates whether the target uses the synchronized QTimer.
|
|
- qcom,pc-mode: Indicates the type of power collapse used by the target. The
|
|
valid values for this are:
|
|
"tz_l2_int" (Power collapse terminates in TZ; integrated L2 cache controller)
|
|
"no_tz_l2_ext", (Power collapse doesn't terminate in TZ; external L2 cache controller)
|
|
"tz_l2_ext" (Power collapse terminates in TZ; external L2 cache controller)
|
|
- qcom,saw-turns-off-pll: Version of SAW2.1 or can turn off the HFPLL, when
|
|
doing power collapse and so the core need to switch to Global PLL before
|
|
PC.
|
|
- qcom,pc-resets-timer: Indicates that the timer gets reset during power collapse.
|
|
|
|
Example:
|
|
|
|
qcom,pm-8x60@fe800664 {
|
|
compatible = "qcom,pm-8x60";
|
|
reg = <0xfe800664 0x40>;
|
|
qcom,pc-mode = "tz_l2_int";
|
|
qcom,use-sync-timer;
|
|
};
|