M7350/kernel/drivers/media/platform/msm/camera_v2/Kconfig
2024-09-09 08:57:42 +00:00

244 lines
8.3 KiB
Plaintext

config MSM_CAMERA_SENSOR
bool "Qualcomm MSM camera sensor support"
depends on MSMB_CAMERA
select NEW_LEDS
select LEDS_CLASS
---help---
This flag enables support for Camera Sensor.
The sensor driver is capable of providing real time
data for camera support. The driver support V4L2
subdev APIs.
config MSM_CPP
bool "Qualcomm MSM Camera Post Processing Engine support"
depends on MSMB_CAMERA
---help---
Enable support for Camera Post-processing Engine
The Post processing engine is capable of scaling
and cropping image. The driver support V4L2 subdev
APIs.
config MSM_CCI
bool "Qualcomm MSM Camera Control Interface support"
depends on MSMB_CAMERA
---help---
Enable support for Camera Control Interface driver only
for those platforms that have hardware support. This driver
is responsible for handling I2C read and write on the I2C
bus. It is also responsible for synchronization with
GPIO and data frames.
config MSM_CSI20_HEADER
bool "Qualcomm MSM CSI 2.0 Header"
depends on MSMB_CAMERA
---help---
Enable support for CSI drivers to include 2.0
header. This header has register macros and its
values and bit mask for register configuration bits
This config macro is required targets based on 8960,
8930 and 8064 platforms.
config MSM_CSI22_HEADER
bool "Qualcomm MSM CSI 2.2 Header"
depends on MSMB_CAMERA
---help---
Enable support for CSI drivers to include 2.2
header. This header has register macros and its
values and bit mask for register configuration bits
This config macro is required targets based on 8610
platform.
config MSM_CSI30_HEADER
bool "Qualcomm MSM CSI 3.0 Header"
depends on MSMB_CAMERA
---help---
Enable support for CSI drivers to include 3.0
header. This header has register macros and its
values and bit mask for register configuration bits
This config macro is required for targets based on
8064 platforms.
config MSM_CSI31_HEADER
bool "Qualcomm MSM CSI 3.1 Header"
depends on MSMB_CAMERA
---help---
Enable support for CSI drivers to include 3.0
header. This header has register macros and its
values and bit mask for register configuration bits
This config macro is required for targets based on
APQ8084 platform.
config MSM_CSIPHY
bool "Qualcomm MSM Camera Serial Interface Physical receiver support"
depends on MSMB_CAMERA
---help---
Enable support for Camera Serial Interface
Physical receiver. It deserializes packets and
supports detection of packet start and stop
signalling.
config MSM_CSID
bool "Qualcomm MSM Camera Serial Interface decoder support"
depends on MSMB_CAMERA
---help---
Enable support for Camera Serial Interface decoder.
It supports lane merging and decoding of packets
based on cid which is mapped to a virtual channel
and datatype.
config MSM_EEPROM
bool "Qualcomm MSM Camera ROM Interface for Calibration support"
depends on MSMB_CAMERA
---help---
Enable support for ROM Interface for Calibration
Provides interface for reading the Claibration data.
and also provides support for writing data in case of FLASH ROM.
Currently supports I2C, CCI and SPI protocol
config MSM_ISPIF
bool "Qualcomm MSM Image Signal Processing interface support"
depends on MSMB_CAMERA
---help---
Enable support for Image Signal Processing interface module.
This module acts as a crossbar between CSID and VFE. Output
of any CID of CSID can be routed to of of pixel or raw
data interface in VFE.
config MSM_ISPIF_V1
bool "Qualcomm MSM Image Signal Processing interface support"
depends on MSMB_CAMERA
---help---
Enable support for Image Signal Processing interface module.
This module acts as a crossbar between CSID and VFE. Output
of any CID of MSM_CSI22_HEADER can be routed to of pixel
or raw data interface in VFE.
config MSM_ISPIF_V2
bool "Qualcomm MSM Image Signal Processing interface support"
depends on MSMB_CAMERA
---help---
Enable support for Image Signal Processing interface module.
This module acts as a crossbar between CSID and VFE. Output
of any CID of CSID can be routed to of pixel
or raw data interface in VFE.
config IMX134
bool "Sensor IMX134 (BAYER 8M)"
depends on MSMB_CAMERA
---help---
Sony 8 MP Bayer Sensor with auto focus, uses
4 mipi lanes full resolution @30fps and
HFR @60fps and @120fps,
Video HDR support.
config IMX132
bool "Sensor IMX132 (BAYER 2M)"
depends on MSMB_CAMERA
---help---
Sony 2 MP Bayer Sensor with auto focus, uses
2 mipi lanes, preview config = 1920 x 1080 at 30 fps,
snapshot config = 1920 x 1080 at 30 fps,
Video HDR support.
config OV9724
bool "Sensor OV9724 (BAYER 2M)"
depends on MSMB_CAMERA
---help---
OmniVision 2 MP Bayer Sensor, supports 2 mipi lanes,
preview and snapshot config at 1280*720 at 30 fps,
hfr video at 60, 90 and 120 fps. This sensor driver does
not support auto focus.
config OV5648
bool "Sensor OV5648 (BAYER 5M)"
depends on MSMB_CAMERA
---help---
OmniVision 5 MP Bayer Sensor, only use 1 mipi lane,
preview set to 1296*972 at 30 fps,
snapshot set to 2592*1944 at 12 fps,
This sensor driver does not support auto focus.
config GC0339
bool "Sensor GC0339 (BAYER .3M)"
depends on MSMB_CAMERA
---help---
gc0339 is a Galaxycore .3 MP Bayer Sensor.
It supports 1 or 2 mipi lanes.
Preview and snapshot resolution shall be 640*480 at 30 fps,
It does not support auto focus.
config OV8825
bool "OmniVision OV8825 (BAYER 8MP)"
depends on MSMB_CAMERA
---help---
OmniVision 8 MP Bayer Sensor with auto focus.uses
2 mipi lanes, preview config = 1632*1224 30 fps,
snapshot config = 3264 * 2448 at 18 fps.
2 lanes max fps is 18, 4 lanes max fps is 24.
config OV8865
bool "OmniVision OV8865 (BAYER 8MP)"
depends on MSMB_CAMERA
---help---
OmniVision 8 MP Bayer Sensor with auto focus.uses
4 mipi lanes, preview config = 1632*1224 30 fps,
snapshot config = 3264 * 2448 at 30 fps.
Max fps is 30fps at 3264 * 2448, 60fps at 1632 * 1224
config s5k4e1
bool "Sensor s5k4e1 (BAYER 5MP)"
depends on MSMB_CAMERA
---help---
Samsung 5 MP Bayer Sensor. It uses 2 mipi lanes,
supports 720P preview at 30 fps
and QSXGA snapshot at 15 fps.
This sensor driver does not support auto focus.
config OV12830
bool "OmniVision OV12830 (BAYER 12MP)"
depends on MSMB_CAMERA
---help---
OmniVision 12.8 MP Bayer Sensor with auto focus.uses
4 mipi lanes, preview config = 2112 * 1500 at 30 fps,
snapshot config = 4224 * 3000 at 15 fps.
2 lanes max fps is 18, 4 lanes max fps is 24.
config MSM_V4L2_VIDEO_OVERLAY_DEVICE
tristate "Qualcomm MSM V4l2 video overlay device"
---help---
Enables support for the MSM V4L2 video
overlay driver. This allows video rendering
apps to render overlaid video using Video4Linux2
APIs, by using /dev/videoX device
config MSMB_JPEG
tristate "Qualcomm MSM Jpeg Encoder Engine support"
depends on MSMB_CAMERA && (ARCH_MSM8974 || ARCH_MSM8226 || ARCH_APQ8084 || ARCH_MSM8916 || ARCH_MSM)
---help---
Enable support for Jpeg Encoder/Decoder
Engine for 8974.
This module serves as the common driver
for the JPEG 1.0 encoder and decoder.
config MSM_GEMINI
tristate "Qualcomm MSM Gemini JPEG engine support"
depends on MSMB_CAMERA && (ARCH_MSM7X30 || ARCH_MSM8X60 || ARCH_MSM8960)
---help---
Enables support for the Gemini JPEG encoder
Engine for 8x60, 7x30 and 8960.
This module serves as the driver
for JPEG encoding functionality.
config MSM_FD
tristate "Qualcomm MSM FD face detection engine support"
depends on MSMB_CAMERA
---help---
Enables support for the MSM FD face detection engine.
config MSM_JPEGDMA
tristate "Qualcomm Technologies Inc. MSM Jpeg dma"
depends on MSMB_CAMERA
select V4L2_MEM2MEM_DEV
---help---
Enable support for Jpeg dma engine.