config MSM_CAMERA_SENSOR bool "Qualcomm MSM camera sensor support" depends on MSMB_CAMERA select NEW_LEDS select LEDS_CLASS ---help--- This flag enables support for Camera Sensor. The sensor driver is capable of providing real time data for camera support. The driver support V4L2 subdev APIs. config MSM_CPP bool "Qualcomm MSM Camera Post Processing Engine support" depends on MSMB_CAMERA ---help--- Enable support for Camera Post-processing Engine The Post processing engine is capable of scaling and cropping image. The driver support V4L2 subdev APIs. config MSM_CCI bool "Qualcomm MSM Camera Control Interface support" depends on MSMB_CAMERA ---help--- Enable support for Camera Control Interface driver only for those platforms that have hardware support. This driver is responsible for handling I2C read and write on the I2C bus. It is also responsible for synchronization with GPIO and data frames. config MSM_CSI20_HEADER bool "Qualcomm MSM CSI 2.0 Header" depends on MSMB_CAMERA ---help--- Enable support for CSI drivers to include 2.0 header. This header has register macros and its values and bit mask for register configuration bits This config macro is required targets based on 8960, 8930 and 8064 platforms. config MSM_CSI22_HEADER bool "Qualcomm MSM CSI 2.2 Header" depends on MSMB_CAMERA ---help--- Enable support for CSI drivers to include 2.2 header. This header has register macros and its values and bit mask for register configuration bits This config macro is required targets based on 8610 platform. config MSM_CSI30_HEADER bool "Qualcomm MSM CSI 3.0 Header" depends on MSMB_CAMERA ---help--- Enable support for CSI drivers to include 3.0 header. This header has register macros and its values and bit mask for register configuration bits This config macro is required for targets based on 8064 platforms. config MSM_CSI31_HEADER bool "Qualcomm MSM CSI 3.1 Header" depends on MSMB_CAMERA ---help--- Enable support for CSI drivers to include 3.0 header. This header has register macros and its values and bit mask for register configuration bits This config macro is required for targets based on APQ8084 platform. config MSM_CSIPHY bool "Qualcomm MSM Camera Serial Interface Physical receiver support" depends on MSMB_CAMERA ---help--- Enable support for Camera Serial Interface Physical receiver. It deserializes packets and supports detection of packet start and stop signalling. config MSM_CSID bool "Qualcomm MSM Camera Serial Interface decoder support" depends on MSMB_CAMERA ---help--- Enable support for Camera Serial Interface decoder. It supports lane merging and decoding of packets based on cid which is mapped to a virtual channel and datatype. config MSM_EEPROM bool "Qualcomm MSM Camera ROM Interface for Calibration support" depends on MSMB_CAMERA ---help--- Enable support for ROM Interface for Calibration Provides interface for reading the Claibration data. and also provides support for writing data in case of FLASH ROM. Currently supports I2C, CCI and SPI protocol config MSM_ISPIF bool "Qualcomm MSM Image Signal Processing interface support" depends on MSMB_CAMERA ---help--- Enable support for Image Signal Processing interface module. This module acts as a crossbar between CSID and VFE. Output of any CID of CSID can be routed to of of pixel or raw data interface in VFE. config MSM_ISPIF_V1 bool "Qualcomm MSM Image Signal Processing interface support" depends on MSMB_CAMERA ---help--- Enable support for Image Signal Processing interface module. This module acts as a crossbar between CSID and VFE. Output of any CID of MSM_CSI22_HEADER can be routed to of pixel or raw data interface in VFE. config MSM_ISPIF_V2 bool "Qualcomm MSM Image Signal Processing interface support" depends on MSMB_CAMERA ---help--- Enable support for Image Signal Processing interface module. This module acts as a crossbar between CSID and VFE. Output of any CID of CSID can be routed to of pixel or raw data interface in VFE. config IMX134 bool "Sensor IMX134 (BAYER 8M)" depends on MSMB_CAMERA ---help--- Sony 8 MP Bayer Sensor with auto focus, uses 4 mipi lanes full resolution @30fps and HFR @60fps and @120fps, Video HDR support. config IMX132 bool "Sensor IMX132 (BAYER 2M)" depends on MSMB_CAMERA ---help--- Sony 2 MP Bayer Sensor with auto focus, uses 2 mipi lanes, preview config = 1920 x 1080 at 30 fps, snapshot config = 1920 x 1080 at 30 fps, Video HDR support. config OV9724 bool "Sensor OV9724 (BAYER 2M)" depends on MSMB_CAMERA ---help--- OmniVision 2 MP Bayer Sensor, supports 2 mipi lanes, preview and snapshot config at 1280*720 at 30 fps, hfr video at 60, 90 and 120 fps. This sensor driver does not support auto focus. config OV5648 bool "Sensor OV5648 (BAYER 5M)" depends on MSMB_CAMERA ---help--- OmniVision 5 MP Bayer Sensor, only use 1 mipi lane, preview set to 1296*972 at 30 fps, snapshot set to 2592*1944 at 12 fps, This sensor driver does not support auto focus. config GC0339 bool "Sensor GC0339 (BAYER .3M)" depends on MSMB_CAMERA ---help--- gc0339 is a Galaxycore .3 MP Bayer Sensor. It supports 1 or 2 mipi lanes. Preview and snapshot resolution shall be 640*480 at 30 fps, It does not support auto focus. config OV8825 bool "OmniVision OV8825 (BAYER 8MP)" depends on MSMB_CAMERA ---help--- OmniVision 8 MP Bayer Sensor with auto focus.uses 2 mipi lanes, preview config = 1632*1224 30 fps, snapshot config = 3264 * 2448 at 18 fps. 2 lanes max fps is 18, 4 lanes max fps is 24. config OV8865 bool "OmniVision OV8865 (BAYER 8MP)" depends on MSMB_CAMERA ---help--- OmniVision 8 MP Bayer Sensor with auto focus.uses 4 mipi lanes, preview config = 1632*1224 30 fps, snapshot config = 3264 * 2448 at 30 fps. Max fps is 30fps at 3264 * 2448, 60fps at 1632 * 1224 config s5k4e1 bool "Sensor s5k4e1 (BAYER 5MP)" depends on MSMB_CAMERA ---help--- Samsung 5 MP Bayer Sensor. It uses 2 mipi lanes, supports 720P preview at 30 fps and QSXGA snapshot at 15 fps. This sensor driver does not support auto focus. config OV12830 bool "OmniVision OV12830 (BAYER 12MP)" depends on MSMB_CAMERA ---help--- OmniVision 12.8 MP Bayer Sensor with auto focus.uses 4 mipi lanes, preview config = 2112 * 1500 at 30 fps, snapshot config = 4224 * 3000 at 15 fps. 2 lanes max fps is 18, 4 lanes max fps is 24. config MSM_V4L2_VIDEO_OVERLAY_DEVICE tristate "Qualcomm MSM V4l2 video overlay device" ---help--- Enables support for the MSM V4L2 video overlay driver. This allows video rendering apps to render overlaid video using Video4Linux2 APIs, by using /dev/videoX device config MSMB_JPEG tristate "Qualcomm MSM Jpeg Encoder Engine support" depends on MSMB_CAMERA && (ARCH_MSM8974 || ARCH_MSM8226 || ARCH_APQ8084 || ARCH_MSM8916 || ARCH_MSM) ---help--- Enable support for Jpeg Encoder/Decoder Engine for 8974. This module serves as the common driver for the JPEG 1.0 encoder and decoder. config MSM_GEMINI tristate "Qualcomm MSM Gemini JPEG engine support" depends on MSMB_CAMERA && (ARCH_MSM7X30 || ARCH_MSM8X60 || ARCH_MSM8960) ---help--- Enables support for the Gemini JPEG encoder Engine for 8x60, 7x30 and 8960. This module serves as the driver for JPEG encoding functionality. config MSM_FD tristate "Qualcomm MSM FD face detection engine support" depends on MSMB_CAMERA ---help--- Enables support for the MSM FD face detection engine. config MSM_JPEGDMA tristate "Qualcomm Technologies Inc. MSM Jpeg dma" depends on MSMB_CAMERA select V4L2_MEM2MEM_DEV ---help--- Enable support for Jpeg dma engine.