M7350/kernel/arch/arm/boot/dts/m7350-un-v3/msm-pm8019.dtsi

416 lines
8.2 KiB
Plaintext
Raw Normal View History

2024-09-09 08:54:06 +00:00
/* Copyright (c) 2012-2013, Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
&spmi_bus {
#address-cells = <1>;
#size-cells = <0>;
interrupt-controller;
#interrupt-cells = <3>;
qcom,pm8019@0 {
spmi-slave-container;
reg = <0x0>;
#address-cells = <1>;
#size-cells = <1>;
qcom,power_on@800 {
compatible = "qcom,qpnp-power-on";
reg = <0x800 0x100>;
interrupts = <0x0 0x8 0x2>;
interrupt-names = "cblpwr";
qcom,pon-dbc-delay = <15625>;
qcom,system-reset;
qcom,pon_1 {
qcom,pon-type = <2>;
qcom,pull-up = <1>;
linux,code = <116>;
};
};
clkdiv@5b00 {
reg = <0x5b00 0x100>;
compatible = "qcom,qpnp-clkdiv";
qcom,cxo-freq = <19200000>;
};
clkdiv@5c00 {
reg = <0x5c00 0x100>;
compatible = "qcom,qpnp-clkdiv";
qcom,cxo-freq = <19200000>;
};
clkdiv@5d00 {
reg = <0x5d00 0x100>;
compatible = "qcom,qpnp-clkdiv";
qcom,cxo-freq = <19200000>;
};
rtc {
spmi-dev-container;
compatible = "qcom,qpnp-rtc";
#address-cells = <1>;
#size-cells = <1>;
qcom,qpnp-rtc-write = <0>;
qcom,qpnp-rtc-alarm-pwrup = <0>;
qcom,pm8019_rtc_rw@6000 {
reg = <0x6000 0x100>;
};
qcom,pm8019_rtc_alarm@6100 {
reg = <0x6100 0x100>;
interrupts = <0x0 0x61 0x1>;
};
};
pm8019_gpios: gpios {
spmi-dev-container;
compatible = "qcom,qpnp-pin";
gpio-controller;
#gpio-cells = <2>;
#address-cells = <1>;
#size-cells = <1>;
label = "pm8019-gpio";
gpio@c000 {
reg = <0xc000 0x100>;
qcom,pin-num = <1>;
};
gpio@c100 {
reg = <0xc100 0x100>;
qcom,pin-num = <2>;
};
gpio@c200 {
reg = <0xc200 0x100>;
qcom,pin-num = <3>;
};
gpio@c300 {
reg = <0xc300 0x100>;
qcom,pin-num = <4>;
};
gpio@c400 {
reg = <0xc400 0x100>;
qcom,pin-num = <5>;
};
gpio@c500 {
reg = <0xc500 0x100>;
qcom,pin-num = <6>;
};
};
pm8019_mpps: mpps {
spmi-dev-container;
compatible = "qcom,qpnp-pin";
gpio-controller;
#gpio-cells = <2>;
#address-cells = <1>;
#size-cells = <1>;
label = "pm8019-mpp";
mpp@a000 {
reg = <0xa000 0x100>;
qcom,pin-num = <1>;
};
mpp@a100 {
reg = <0xa100 0x100>;
qcom,pin-num = <2>;
};
mpp@a200 {
reg = <0xa200 0x100>;
qcom,pin-num = <3>;
};
mpp@a300 {
reg = <0xa300 0x100>;
qcom,pin-num = <4>;
};
mpp@a400 {
reg = <0xa400 0x100>;
qcom,pin-num = <5>;
};
mpp@a500 {
reg = <0xa500 0x100>;
qcom,pin-num = <6>;
};
};
pm8019_vadc: vadc@3100 {
compatible = "qcom,qpnp-vadc";
reg = <0x3100 0x100>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0x0 0x31 0x0>;
interrupt-names = "eoc-int-en-set";
qcom,adc-bit-resolution = <15>;
qcom,adc-vdd-reference = <1800>;
qcom,vadc-poll-eoc;
chan@8 {
label = "die_temp";
reg = <8>;
qcom,decimation = <0>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "absolute";
qcom,scale-function = <3>;
qcom,hw-settle-time = <0>;
qcom,fast-avg-setup = <0>;
};
chan@9 {
label = "ref_625mv";
reg = <9>;
qcom,decimation = <0>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "absolute";
qcom,scale-function = <0>;
qcom,hw-settle-time = <0>;
qcom,fast-avg-setup = <0>;
};
chan@a {
label = "ref_1250v";
reg = <0xa>;
qcom,decimation = <0>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "absolute";
qcom,scale-function = <0>;
qcom,hw-settle-time = <0>;
qcom,fast-avg-setup = <0>;
};
};
pm8019_adc_tm: vadc@3400 {
compatible = "qcom,qpnp-adc-tm";
reg = <0x3400 0x100>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0x0 0x34 0x0>,
<0x0 0x34 0x3>,
<0x0 0x34 0x4>;
interrupt-names = "eoc-int-en-set",
"high-thr-en-set",
"low-thr-en-set";
qcom,adc-bit-resolution = <15>;
qcom,adc-vdd-reference = <1800>;
};
};
qcom,pm8019@1 {
spmi-slave-container;
reg = <0x1>;
#address-cells = <1>;
#size-cells = <1>;
regulator@1400 {
regulator-name = "8019_s1";
spmi-dev-container;
#address-cells = <1>;
#size-cells = <1>;
compatible = "qcom,qpnp-regulator";
reg = <0x1400 0x300>;
status = "disabled";
qcom,ctl@1400 {
reg = <0x1400 0x100>;
};
qcom,ps@1500 {
reg = <0x1500 0x100>;
};
qcom,freq@1600 {
reg = <0x1600 0x100>;
};
};
regulator@1700 {
regulator-name = "8019_s2";
spmi-dev-container;
#address-cells = <1>;
#size-cells = <1>;
compatible = "qcom,qpnp-regulator";
reg = <0x1700 0x300>;
status = "disabled";
qcom,ctl@1700 {
reg = <0x1700 0x100>;
};
qcom,ps@1800 {
reg = <0x1800 0x100>;
};
qcom,freq@1900 {
reg = <0x1900 0x100>;
};
};
regulator@1a00 {
regulator-name = "8019_s3";
spmi-dev-container;
#address-cells = <1>;
#size-cells = <1>;
compatible = "qcom,qpnp-regulator";
reg = <0x1a00 0x300>;
status = "disabled";
qcom,ctl@1a00 {
reg = <0x1a00 0x100>;
};
qcom,ps@1b00 {
reg = <0x1b00 0x100>;
};
qcom,freq@1c00 {
reg = <0x1c00 0x100>;
};
};
regulator@1d00 {
regulator-name = "8019_s4";
spmi-dev-container;
#address-cells = <1>;
#size-cells = <1>;
compatible = "qcom,qpnp-regulator";
reg = <0x1d00 0x300>;
status = "disabled";
qcom,ctl@1d00 {
reg = <0x1d00 0x100>;
};
qcom,ps@1e00 {
reg = <0x1e00 0x100>;
};
qcom,freq@1f00 {
reg = <0x1f00 0x100>;
};
};
regulator@4000 {
regulator-name = "8019_l1";
reg = <0x4000 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4100 {
regulator-name = "8019_l2";
reg = <0x4100 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4200 {
regulator-name = "8019_l3";
reg = <0x4200 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4300 {
regulator-name = "8019_l4";
reg = <0x4300 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4400 {
regulator-name = "8019_l5";
reg = <0x4400 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4500 {
regulator-name = "8019_l6";
reg = <0x4500 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4600 {
regulator-name = "8019_l7";
reg = <0x4600 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4700 {
regulator-name = "8019_l8";
reg = <0x4700 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4800 {
regulator-name = "8019_l9";
reg = <0x4800 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4900 {
regulator-name = "8019_l10";
reg = <0x4900 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4a00 {
regulator-name = "8019_l11";
reg = <0x4a00 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4b00 {
regulator-name = "8019_l12";
reg = <0x4b00 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4c00 {
regulator-name = "8019_l13";
reg = <0x4c00 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4d00 {
regulator-name = "8019_l14";
reg = <0x4d00 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4e00 {
regulator-name = "8019_ldo_xo";
reg = <0x4e00 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
regulator@4f00 {
regulator-name = "8019_ldo_rfclk";
reg = <0x4f00 0x100>;
compatible = "qcom,qpnp-regulator";
status = "disabled";
};
};
};