.

LED_Kueche/LED_Kueche.ino

@@ -1,21 +1,28 @@
 
     #include <Adafruit_NeoPixel.h>
     
-    #define PIN_ONOFF 2
-    #define PIN_FUNCTION1 3
-    #define PIN_FUNCTION2 4
-    #define PIN_LEDS 5
+    #define PIN_ONOFF 6
+    #define PIN_FUNCTION1 7
+    #define PIN_FUNCTION2 8
+    #define PIN_LEDS 9
     #define NUM_LEDS 124
+    #define NUM_LEDS_X 6
     
     Adafruit_NeoPixel strip = Adafruit_NeoPixel(NUM_LEDS, PIN_LEDS, NEO_GRB + NEO_KHZ800);
 
     bool boolOnOff;
+    bool toggleOnOff;
     int intColour;
+    bool toggleColour;
   
     void setup() {
+      pinMode(PIN_ONOFF, INPUT);
+      pinMode(PIN_FUNCTION1, INPUT);
       Serial.begin(9600);
       boolOnOff = 1;
+      toggleOnOff = 0;
       intColour = 0;
+      toggleColour = 0;
       strip.begin();
       strip.show(); // Initialize all pixels to 'off'
       Serial.println("My Sketch has started");
@@ -25,15 +32,62 @@
     
     void loop() {
  
-      if (onOff(PIN_ONOFF,boolOnOff)) {
-        setColour(PIN_FUNCTION1,intColour);
+      if (boolOnOff) {
         Serial.println("ON");
+
+        if (toggleColour) {
+          if (intColour < 3) {
+            intColour++;
+          }
+          else {
+            intColour = 0;
+          }
+        }
+
+        switch (intColour) {
+          case 0: setAll(0xff,0xff,0xff);
+                  toggleColour = 0;
+                  break;
+          case 1: setAll(0xff,0x00,0x00);
+                  toggleColour = 0;
+                  break;
+          case 2: setAll(0x00,0xff,0x00);
+                  toggleColour = 0;
+                  break;
+          case 3: setAll(0x00,0x00,0xff);
+                  toggleColour = 0;
+                  break;
+          default:setAll(0x00,0x00,0x00);
+                  toggleColour = 0;
+        }
+
+        while (digitalRead(PIN_FUNCTION1)){
+          toggleColour = 1;
+          delay(250);
+        }
+      
       }
       else {
         Serial.println("OFF");
         setAll(0x00,0x00,0x00); 
       }
       showStrip();
+      
+      if (toggleOnOff){
+        boolOnOff = !boolOnOff;
+        toggleOnOff = 0;
+      }
+      else{
+        boolOnOff = boolOnOff;
+      }
+
+      while (digitalRead(PIN_ONOFF)){
+        toggleOnOff = 1;
+        delay(250);
+      }
+        
+      
+      Serial.println(intColour);
     }
 
 
@@ -60,67 +114,13 @@
 // Neopixel setze ganzen Streifen
 
     void setAll(byte red, byte green, byte blue) {
-      for(int i = 6; i < NUM_LEDS; i++ ) {
+      for(int i = NUM_LEDS_X; i < NUM_LEDS; i++ ) {
         setPixel(i, red, green, blue);
       }
     }
 
 
-// Entstörung des Schaltsignal des Tasters durch Delay | Anmerkung an mich ggf. nur die abfallende Flanke abfragen? und/oder mit Flankenmerker statt Schleife arbeiten
-
-    bool pressedKey (int keyIn) {           
-      if (digitalRead(keyIn) == 1) {
-       delay(500);
-       if (digitalRead(keyIn) == 1) {
-        while (digitalRead(keyIn) == 1) {
-          delay(500);
-        }
-        return 1;
-       }
-       else {
-        return 0;
-       }
-      }
-      else {
-        return 0; 
-      }
-    }
-
-
-// Schaltet den LED-Streifen Ein und/oder Aus
-
-    bool onOff(int pinOnOff, bool varOnOff) {
-      if (pressedKey(pinOnOff)) {
-        Serial.print("Pressed");
-        Serial.println(pinOnOff);
-        varOnOff = !varOnOff;
-      }
-      return varOnOff;
-    }
-
-
-//Setzt die Farbe des LED-Streifens
-
-    void setColour(int pinSetColour, int varColour) {
-      if (pressedKey(pinSetColour)) {
-        if (varColour < 3) {
-          varColour++;
-        }
-        else {
-          varColour = 0;
-        }
-      }
-      switch (varColour) {
-        case 0: setAll(0xff,0xff,0xff);
-                break;
-        case 1: setAll(0xff,0x00,0x00);
-                break;
-        case 2: setAll(0x00,0xff,0x00);
-                break;
-        case 3: setAll(0x00,0x00,0xff);
-                break;
-        default:setAll(0x00,0x00,0x00);
-      }
-      
-    }
+    
+
+