Add comments

LED_Kueche/LED_Kueche.ino

@@ -0,0 +1,126 @@
+
+    #include <Adafruit_NeoPixel.h>
+    
+    #define PIN_ONOFF 2
+    #define PIN_FUNCTION1 3
+    #define PIN_FUNCTION2 4
+    #define PIN_LEDS 5
+    #define NUM_LEDS 124
+    
+    Adafruit_NeoPixel strip = Adafruit_NeoPixel(NUM_LEDS, PIN_LEDS, NEO_GRB + NEO_KHZ800);
+
+    bool boolOnOff;
+    int intColour;
+  
+    void setup() {
+      Serial.begin(9600);
+      boolOnOff = 1;
+      intColour = 0;
+      strip.begin();
+      strip.show(); // Initialize all pixels to 'off'
+      Serial.println("My Sketch has started");
+    }
+
+
+    
+    void loop() {
+ 
+      if (onOff(PIN_ONOFF,boolOnOff)) {
+        setColour(PIN_FUNCTION1,intColour);
+        Serial.println("ON");
+      }
+      else {
+        Serial.println("OFF");
+        setAll(0x00,0x00,0x00); 
+      }
+      showStrip();
+    }
+
+
+// Neopixel senden an Streifen
+
+    void showStrip() {
+     #ifdef ADAFRUIT_NEOPIXEL_H
+       // NeoPixel
+       strip.show();
+     #endif
+    }
+
+
+// Neopixel setze einzelnen Pixel
+
+    void setPixel(int Pixel, byte red, byte green, byte blue) {
+     #ifdef ADAFRUIT_NEOPIXEL_H
+       // NeoPixel
+       strip.setPixelColor(Pixel, strip.Color(red, green, blue));
+     #endif
+    }
+
+
+// Neopixel setze ganzen Streifen
+
+    void setAll(byte red, byte green, byte blue) {
+      for(int i = 6; i < NUM_LEDS; i++ ) {
+        setPixel(i, red, green, blue);
+      }
+    }
+
+
+// Entstörung des Schaltsignal des Tasters durch Delay | Anmerkung an mich ggf. nur die abfallende Flanke abfragen? und/oder mit Flankenmerker statt Schleife arbeiten
+
+    bool pressedKey (int keyIn) {           
+      if (digitalRead(keyIn) == 1) {
+       delay(500);
+       if (digitalRead(keyIn) == 1) {
+        while (digitalRead(keyIn) == 1) {
+          delay(500);
+        }
+        return 1;
+       }
+       else {
+        return 0;
+       }
+      }
+      else {
+        return 0; 
+      }
+    }
+
+
+// Schaltet den LED-Streifen Ein und/oder Aus
+
+    bool onOff(int pinOnOff, bool varOnOff) {
+      if (pressedKey(pinOnOff)) {
+        Serial.print("Pressed");
+        Serial.println(pinOnOff);
+        varOnOff = !varOnOff;
+      }
+      return varOnOff;
+    }
+
+
+//Setzt die Farbe des LED-Streifens
+
+    void setColour(int pinSetColour, int varColour) {
+      if (pressedKey(pinSetColour)) {
+        if (varColour < 3) {
+          varColour++;
+        }
+        else {
+          varColour = 0;
+        }
+      }
+      switch (varColour) {
+        case 0: setAll(0xff,0xff,0xff);
+                break;
+        case 1: setAll(0xff,0x00,0x00);
+                break;
+        case 2: setAll(0x00,0xff,0x00);
+                break;
+        case 3: setAll(0x00,0x00,0xff);
+                break;
+        default:setAll(0x00,0x00,0x00);
+      }
+      
+    }
+