5 Commits
Author SHA1 Message Date
Alex PetrochenkoandClaude Sonnet 4.6 259eda6663 fix: post-review issues + close M2/M3/M4 from internal backlog (v1.9.9)
From Sonnet pre-release code review (3 real issues):
- F1 (high): factory reset atomicity — save cleared creds BEFORE zeroing reset
  counter, so a power loss between commits still results in WiFiManager AP boot
  instead of inconsistent "counter=0 + stale creds" state
- F2: isValidSSID now allows single-char SSIDs (per 802.11 spec)
- F3: ntp_interval changes now trigger needsRestart (NTPClient constructed once
  in setup() with this value, doesn't pick up runtime changes)

From internal backlog:
- M2: setupWiFi Try-2 now supports open networks (no password) — fixed the
  &&-condition that required both ssid and password
- M3: removed dead NTP_WAITING/NTP_SUCCESS/NTP_FAILED enum values
- M4: randomSeed() with ESP.getChipId() ^ micros() — dissolve pattern varies

Tested on hardware: 72/73 tests pass (single failure is expected — ntp_interval
fuzz cases now trigger restart due to F3, second case lands in reboot window).

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-05-19 16:05:57 +01:00
Alex Petrochenko 02834bada1 fix(wifi): preserve AP_STA mode after WiFi.begin() kills the AP
WiFi.begin() internally resets mode to STA, immediately destroying the
fallback AP that was just created. Fix: restore WIFI_AP_STA mode after
begin() when in AP mode, so TJ56654-Setup stays visible.

This was why the fallback AP was never visible despite being 'created'.
2026-05-18 20:52:14 +01:00
Alex PetrochenkoandClaude Sonnet 4.6 5b8a58715e feat: triple power-cycle factory reset (no FTDI needed)
Power-cycle the device 3 times within 10 seconds to trigger factory reset:
- Clears WiFi credentials (SSID + password) in EEPROM
- Shows "FACTORY RESET / WiFi: TJ56654-Setup / Pass: 12345678" on display
- Reboots into WiFiManager AP mode for reconfiguration

Counter stored at EEPROM offset 480 (well past Config ~260 bytes).
Clears automatically after 10s of stable operation.

Prevents the need for FTDI/USB recovery when credentials are corrupted.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-05-18 20:25:32 +01:00
Alex PetrochenkoandClaude Sonnet 4.6 78bbd96f45 fix: C1 C2 H1 H2 H3 — stability fixes for long-running operation
C1 (critical): Add 15s watchdog for WEATHER_REQUESTING state — resets to
IDLE if TCP connection hangs silently, preventing permanent weather death

C2 (critical): Fix millis() rollover in all retry timers — replace unsafe
`millis() >= nextRetryTime` with subtraction-safe `(millis() - nextRetryTime)
< 0x80000000UL` in RetryConfig and WiFiRetryConfig; fix boot guard with
static flag instead of raw millis() comparison

H1 (high): Fix DST last-Sunday formula — was using incorrect year-only
heuristic; now derives weekday of the 31st from current day's tm_wday:
`weekdayOf31 = (tm_wday + (31 - day)) % 7`. Verified: March 2026 = 29th ✓

H2 (high): Replace String+= with snprintf+sendContent in handleAPITime,
handleAPIStatus, handleAPIDebug, handleAPIWeather — eliminates permanent
heap fragmentation from JS polling every second

H3 (high): Add volatile to weatherState and ntpState — shared between
ESPAsyncTCP callbacks and main loop; prevents stale register-cached reads

RAM: 37,268 bytes (46%) — reduced from 37,560 due to String elimination

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-05-18 15:53:39 +01:00
Alex PetrochenkoandClaude Sonnet 4.6 3a34244ac8 refactor: rename firmware directory to weather_clock
clock_ntp_ota_v1.9/ → weather_clock/ (version no longer baked into path)
clock_ntp_ota_v1.9.ino → weather_clock.ino

Version is tracked in config.h (FIRMWARE_VERSION), not in filenames.
Updated references in README, CONTRIBUTING, and docs/INSTALLATION.md.

Note: forks using the old path will need to sync this rename before
submitting new PRs.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-05-14 17:52:34 +01:00