M7350/kernel/drivers/video/msm/mipi_renesas_cmd_fwvga_pt.c
2024-09-09 08:52:07 +00:00

158 lines
4.4 KiB
C

/* Copyright (c) 2011-2012, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include "msm_fb.h"
#include "mipi_dsi.h"
#include "mipi_renesas.h"
static struct msm_panel_info pinfo;
static struct mipi_dsi_phy_ctrl dsi_cmd_mode_phy_db = {
#ifdef CONFIG_FB_MSM_MDP303
/* DSI Bit Clock at 500 MHz, 2 lane, RGB888 */
/* regulator */
{0x03, 0x01, 0x01, 0x00},
/* timing */
{0xb9, 0x8e, 0x1f, 0x00, 0x98, 0x9c, 0x22, 0x90,
0x18, 0x03, 0x04},
/* phy ctrl */
{0x7f, 0x00, 0x00, 0x00},
/* strength */
{0xbb, 0x02, 0x06, 0x00},
/* pll control */
{0x01, 0xec, 0x31, 0xd2, 0x00, 0x40, 0x37, 0x62,
0x01, 0x0f, 0x07,
0x05, 0x14, 0x03, 0x0, 0x0, 0x0, 0x20, 0x0, 0x02, 0x0},
#else
/* DSI_BIT_CLK at 400MHz, 1 lane, RGB888 */
{0x03, 0x01, 0x01, 0x00}, /* regulator */
/* timing */
{0x22, 0x0c, 0x7, 0x00, 0x10, 0x20, 0x10,
0xd, 0x8, 0x2, 0x3},
/* phy ctrl */
{0x7f, 0x00, 0x00, 0x00},
/* strength */
{0xee, 0x00, 0x6, 0x00},
/* pll control */
{0x40, 0x2f, 0xb1, 0xda, 0x00, 0x50, 0x48, 0x63,
#if defined(RENESAS_FWVGA_TWO_LANE)
0x33, 0x1f, 0x07,
#else /* default set to 1 lane */
0x30, 0x07, 0x07,
#endif
0x05, 0x14, 0x03, 0x0, 0x0, 0x54, 0x06, 0x10, 0x04, 0x0},
#endif
};
static int __init mipi_cmd_renesas_fwvga_pt_init(void)
{
int ret;
if (msm_fb_detect_client("mipi_cmd_renesas_fwvga"))
return 0;
pinfo.xres = 480;
pinfo.yres = 864;
pinfo.type = MIPI_CMD_PANEL;
pinfo.pdest = DISPLAY_1;
pinfo.wait_cycle = 0;
pinfo.bpp = 24;
#ifdef CONFIG_FB_MSM_MDP303
pinfo.lcdc.h_back_porch = 100;
pinfo.lcdc.h_front_porch = 100;
pinfo.lcdc.h_pulse_width = 8;
pinfo.lcdc.v_back_porch = 20;
pinfo.lcdc.v_front_porch = 20;
pinfo.lcdc.v_pulse_width = 1;
#else
pinfo.lcdc.h_front_porch = 50;
#if defined(RENESAS_FWVGA_TWO_LANE)
pinfo.lcdc.h_back_porch = 400;
pinfo.lcdc.h_pulse_width = 5;
pinfo.lcdc.v_back_porch = 75;
pinfo.lcdc.v_front_porch = 5;
pinfo.lcdc.v_pulse_width = 1;
#else
pinfo.lcdc.h_back_porch = 50;
pinfo.lcdc.h_pulse_width = 20;
pinfo.lcdc.v_back_porch = 10;
pinfo.lcdc.v_front_porch = 10;
pinfo.lcdc.v_pulse_width = 5;
#endif
#endif /* CONFIG_FB_MSM_MDP303 */
pinfo.lcdc.border_clr = 0; /* blk */
pinfo.lcdc.underflow_clr = 0xff; /* blue */
pinfo.lcdc.hsync_skew = 0;
pinfo.bl_max = 255;
pinfo.bl_min = 1;
pinfo.fb_num = 2;
#ifdef CONFIG_FB_MSM_MDP303
pinfo.clk_rate = 499000000;
#else
pinfo.clk_rate = 152000000;
#endif
pinfo.lcd.refx100 = 6000; /* adjust refx100 to prevent tearing */
pinfo.mipi.mode = DSI_CMD_MODE;
pinfo.mipi.dst_format = DSI_CMD_DST_FORMAT_RGB888;
pinfo.mipi.vc = 0;
pinfo.mipi.rgb_swap = DSI_RGB_SWAP_RGB;
pinfo.mipi.data_lane0 = TRUE;
#ifdef CONFIG_FB_MSM_MDP303
pinfo.lcd.vsync_enable = TRUE;
pinfo.lcd.hw_vsync_mode = TRUE;
pinfo.mipi.data_lane1 = TRUE;
pinfo.mipi.t_clk_post = 0x20;
pinfo.mipi.t_clk_pre = 0x2F;
pinfo.mipi.stream = 0; /* dma_p */
pinfo.mipi.mdp_trigger = DSI_CMD_TRIGGER_SW;
pinfo.mipi.dma_trigger = DSI_CMD_TRIGGER_SW;
pinfo.mipi.te_sel = 1; /* TE from vsync gpio */
pinfo.mipi.interleave_max = 1;
pinfo.mipi.insert_dcs_cmd = TRUE;
pinfo.mipi.wr_mem_continue = 0x3c;
pinfo.mipi.wr_mem_start = 0x2c;
pinfo.mipi.dsi_phy_db = &dsi_cmd_mode_phy_db;
pinfo.mipi.tx_eot_append = 0x01;
pinfo.mipi.rx_eot_ignore = 0;
pinfo.mipi.dlane_swap = 0x01;
#else
#if defined(RENESAS_FWVGA_TWO_LANE)
pinfo.mipi.data_lane1 = TRUE;
#else
pinfo.mipi.data_lane1 = FALSE;
#endif
pinfo.mipi.t_clk_post = 0x18;
pinfo.mipi.t_clk_pre = 0x14;
pinfo.mipi.stream = 0; /* dma_p */
pinfo.mipi.mdp_trigger = DSI_CMD_TRIGGER_SW;
pinfo.mipi.dma_trigger = DSI_CMD_TRIGGER_SW;
pinfo.mipi.te_sel = 1; /* TE from vsycn gpio */
pinfo.mipi.interleave_max = 1;
pinfo.mipi.insert_dcs_cmd = TRUE;
pinfo.mipi.wr_mem_continue = 0x3c;
pinfo.mipi.wr_mem_start = 0x2c;
pinfo.mipi.dsi_phy_db = &dsi_cmd_mode_phy_db;
#endif /* CONFIG_FB_MSM_MDP303 */
ret = mipi_renesas_device_register(&pinfo, MIPI_DSI_PRIM,
MIPI_DSI_PANEL_FWVGA_PT);
if (ret)
pr_err("%s: failed to register device!\n", __func__);
return ret;
}
module_init(mipi_cmd_renesas_fwvga_pt_init);