M7350/kernel/arch/arm/mach-msm/pil-q6v4.c
2024-09-09 08:52:07 +00:00

280 lines
7.2 KiB
C

/* Copyright (c) 2011-2012, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/regulator/consumer.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <mach/msm_bus.h>
#include "peripheral-loader.h"
#include "pil-q6v4.h"
#include "scm-pas.h"
#define QDSP6SS_RST_EVB 0x0
#define QDSP6SS_RESET 0x04
#define QDSP6SS_STRAP_TCM 0x1C
#define QDSP6SS_STRAP_AHB 0x20
#define QDSP6SS_GFMUX_CTL 0x30
#define QDSP6SS_PWR_CTL 0x38
#define Q6SS_SS_ARES BIT(0)
#define Q6SS_CORE_ARES BIT(1)
#define Q6SS_ISDB_ARES BIT(2)
#define Q6SS_ETM_ARES BIT(3)
#define Q6SS_STOP_CORE_ARES BIT(4)
#define Q6SS_PRIV_ARES BIT(5)
#define Q6SS_L2DATA_SLP_NRET_N BIT(0)
#define Q6SS_SLP_RET_N BIT(1)
#define Q6SS_L1TCM_SLP_NRET_N BIT(2)
#define Q6SS_L2TAG_SLP_NRET_N BIT(3)
#define Q6SS_ETB_SLEEP_NRET_N BIT(4)
#define Q6SS_ARR_STBY_N BIT(5)
#define Q6SS_CLAMP_IO BIT(6)
#define Q6SS_CLK_ENA BIT(1)
#define Q6SS_SRC_SWITCH_CLK_OVR BIT(8)
int pil_q6v4_make_proxy_votes(struct pil_desc *pil)
{
const struct q6v4_data *drv = pil_to_q6v4_data(pil);
int ret;
ret = clk_prepare_enable(drv->xo);
if (ret) {
dev_err(pil->dev, "Failed to enable XO\n");
goto err;
}
if (drv->pll_supply) {
ret = regulator_enable(drv->pll_supply);
if (ret) {
dev_err(pil->dev, "Failed to enable pll supply\n");
goto err_regulator;
}
}
return 0;
err_regulator:
clk_disable_unprepare(drv->xo);
err:
return ret;
}
EXPORT_SYMBOL(pil_q6v4_make_proxy_votes);
void pil_q6v4_remove_proxy_votes(struct pil_desc *pil)
{
const struct q6v4_data *drv = pil_to_q6v4_data(pil);
if (drv->pll_supply)
regulator_disable(drv->pll_supply);
clk_disable_unprepare(drv->xo);
}
EXPORT_SYMBOL(pil_q6v4_remove_proxy_votes);
int pil_q6v4_power_up(struct q6v4_data *drv)
{
int err;
struct device *dev = drv->desc.dev;
err = regulator_set_voltage(drv->vreg, 743750, 743750);
if (err) {
dev_err(dev, "Failed to set regulator's voltage step.\n");
return err;
}
err = regulator_enable(drv->vreg);
if (err) {
dev_err(dev, "Failed to enable regulator.\n");
return err;
}
/*
* Q6 hardware requires a two step voltage ramp-up.
* Delay between the steps.
*/
udelay(100);
err = regulator_set_voltage(drv->vreg, 1050000, 1050000);
if (err) {
dev_err(dev, "Failed to set regulator's voltage.\n");
return err;
}
drv->vreg_enabled = true;
return 0;
}
EXPORT_SYMBOL(pil_q6v4_power_up);
void pil_q6v4_power_down(struct q6v4_data *drv)
{
if (drv->vreg_enabled) {
regulator_disable(drv->vreg);
drv->vreg_enabled = false;
}
}
EXPORT_SYMBOL(pil_q6v4_power_down);
int pil_q6v4_boot(struct pil_desc *pil)
{
u32 reg, err;
const struct q6v4_data *drv = pil_to_q6v4_data(pil);
phys_addr_t start_addr = pil_get_entry_addr(pil);
/* Enable Q6 ACLK */
writel_relaxed(0x10, drv->aclk_reg);
/* Unhalt bus port */
err = msm_bus_axi_portunhalt(drv->bus_port);
if (err)
dev_err(pil->dev, "Failed to unhalt bus port\n");
/* Deassert Q6SS_SS_ARES */
reg = readl_relaxed(drv->base + QDSP6SS_RESET);
reg &= ~(Q6SS_SS_ARES);
writel_relaxed(reg, drv->base + QDSP6SS_RESET);
/* Program boot address */
writel_relaxed((start_addr >> 8) & 0xFFFFFF,
drv->base + QDSP6SS_RST_EVB);
/* Program TCM and AHB address ranges */
writel_relaxed(drv->strap_tcm_base, drv->base + QDSP6SS_STRAP_TCM);
writel_relaxed(drv->strap_ahb_upper | drv->strap_ahb_lower,
drv->base + QDSP6SS_STRAP_AHB);
/* Turn off Q6 core clock */
writel_relaxed(Q6SS_SRC_SWITCH_CLK_OVR,
drv->base + QDSP6SS_GFMUX_CTL);
/* Put memories to sleep */
writel_relaxed(Q6SS_CLAMP_IO, drv->base + QDSP6SS_PWR_CTL);
/* Assert resets */
reg = readl_relaxed(drv->base + QDSP6SS_RESET);
reg |= (Q6SS_CORE_ARES | Q6SS_ISDB_ARES | Q6SS_ETM_ARES
| Q6SS_STOP_CORE_ARES);
writel_relaxed(reg, drv->base + QDSP6SS_RESET);
/* Wait 8 AHB cycles for Q6 to be fully reset (AHB = 1.5Mhz) */
mb();
usleep_range(20, 30);
/* Turn on Q6 memories */
reg = Q6SS_L2DATA_SLP_NRET_N | Q6SS_SLP_RET_N | Q6SS_L1TCM_SLP_NRET_N
| Q6SS_L2TAG_SLP_NRET_N | Q6SS_ETB_SLEEP_NRET_N | Q6SS_ARR_STBY_N
| Q6SS_CLAMP_IO;
writel_relaxed(reg, drv->base + QDSP6SS_PWR_CTL);
/* Turn on Q6 core clock */
reg = Q6SS_CLK_ENA | Q6SS_SRC_SWITCH_CLK_OVR;
writel_relaxed(reg, drv->base + QDSP6SS_GFMUX_CTL);
/* Remove Q6SS_CLAMP_IO */
reg = readl_relaxed(drv->base + QDSP6SS_PWR_CTL);
reg &= ~Q6SS_CLAMP_IO;
writel_relaxed(reg, drv->base + QDSP6SS_PWR_CTL);
/* Bring Q6 core out of reset and start execution. */
writel_relaxed(0x0, drv->base + QDSP6SS_RESET);
return 0;
}
EXPORT_SYMBOL(pil_q6v4_boot);
int pil_q6v4_shutdown(struct pil_desc *pil)
{
u32 reg;
struct q6v4_data *drv = pil_to_q6v4_data(pil);
/* Make sure bus port is halted */
msm_bus_axi_porthalt(drv->bus_port);
/* Turn off Q6 core clock */
writel_relaxed(Q6SS_SRC_SWITCH_CLK_OVR,
drv->base + QDSP6SS_GFMUX_CTL);
/* Assert resets */
reg = (Q6SS_SS_ARES | Q6SS_CORE_ARES | Q6SS_ISDB_ARES
| Q6SS_ETM_ARES | Q6SS_STOP_CORE_ARES | Q6SS_PRIV_ARES);
writel_relaxed(reg, drv->base + QDSP6SS_RESET);
/* Turn off Q6 memories */
writel_relaxed(Q6SS_CLAMP_IO, drv->base + QDSP6SS_PWR_CTL);
return 0;
}
EXPORT_SYMBOL(pil_q6v4_shutdown);
int pil_q6v4_init_image_trusted(struct pil_desc *pil,
const u8 *metadata, size_t size)
{
struct q6v4_data *drv = pil_to_q6v4_data(pil);
return pas_init_image(drv->pas_id, metadata, size);
}
EXPORT_SYMBOL(pil_q6v4_init_image_trusted);
int pil_q6v4_boot_trusted(struct pil_desc *pil)
{
struct q6v4_data *drv = pil_to_q6v4_data(pil);
int err;
err = pil_q6v4_power_up(drv);
if (err)
return err;
/* Unhalt bus port */
err = msm_bus_axi_portunhalt(drv->bus_port);
if (err)
dev_err(pil->dev, "Failed to unhalt bus port\n");
return pas_auth_and_reset(drv->pas_id);
}
EXPORT_SYMBOL(pil_q6v4_boot_trusted);
int pil_q6v4_shutdown_trusted(struct pil_desc *pil)
{
int ret;
struct q6v4_data *drv = pil_to_q6v4_data(pil);
/* Make sure bus port is halted */
msm_bus_axi_porthalt(drv->bus_port);
ret = pas_shutdown(drv->pas_id);
if (ret)
return ret;
pil_q6v4_power_down(drv);
return ret;
}
EXPORT_SYMBOL(pil_q6v4_shutdown_trusted);
void __devinit
pil_q6v4_init(struct q6v4_data *drv, const struct pil_q6v4_pdata *pdata)
{
drv->strap_tcm_base = pdata->strap_tcm_base;
drv->strap_ahb_upper = pdata->strap_ahb_upper;
drv->strap_ahb_lower = pdata->strap_ahb_lower;
drv->aclk_reg = pdata->aclk_reg;
drv->jtag_clk_reg = pdata->jtag_clk_reg;
drv->pas_id = pdata->pas_id;
drv->bus_port = pdata->bus_port;
regulator_set_optimum_mode(drv->vreg, 100000);
}
EXPORT_SYMBOL(pil_q6v4_init);
MODULE_DESCRIPTION("Support for booting QDSP6v4 (Hexagon) processors");
MODULE_LICENSE("GPL v2");