M7350/kernel/arch/arm/mach-msm/Kconfig
2024-09-09 08:52:07 +00:00

3082 lines
84 KiB
Plaintext
Executable File

if ARCH_MSM
menu "MSM SoC Type"
config ARCH_MSM7X01A
bool "MSM7x00A / MSM7x01A"
select ARCH_MSM_ARM11
select MSM_VIC
select CPU_V6
select GPIO_MSM_V1
select MSM_REMOTE_SPINLOCK_SWP
config ARCH_MSM7X25
bool "MSM7x25"
select ARCH_MSM_ARM11
select MSM_VIC
select CPU_V6
select GPIO_MSM_V1
select MSM_REMOTE_SPINLOCK_SWP
select MULTI_IRQ_HANDLER
config ARCH_MSM7X27
bool "MSM7x27"
select ARCH_MSM_ARM11 if MSM_SOC_REV_NONE
select ARCH_HAS_BARRIERS
select ARCH_MSM_CORTEX_A5 if MSM_SOC_REV_A
select MSM_VIC
select CPU_V6 if MSM_SOC_REV_NONE
select CPU_V7 if MSM_SOC_REV_A
select GPIO_MSM_V1
select MSM_REMOTE_SPINLOCK_SWP if MSM_SOC_REV_NONE
select MSM_GPIOMUX
select REGULATOR
select MULTI_IRQ_HANDLER
select MSM_PROC_COMM_REGULATOR
select CLEANCACHE
select QCACHE
select MSM_PM2 if PM
select MSM_RUN_QUEUE_STATS if MSM_SOC_REV_A
select DONT_MAP_HOLE_AFTER_MEMBANK0
select MIGHT_HAVE_CACHE_L2X0
select MSM_MODEM_RESTART
config ARCH_MSM7X30
bool "MSM7x30"
select ARCH_MSM_SCORPION
select MSM_VIC
select CPU_V7
select GPIO_MSM_V1
select MSM_REMOTE_SPINLOCK_DEKKERS
select ARCH_SPARSEMEM_ENABLE
select ARCH_HAS_HOLES_MEMORYMODEL
select MIGRATION
select MSM_GPIOMUX
select RESERVE_FIRST_PAGE
select MSM_DALRPC
select MSM_SPM_V1
select REGULATOR
select MSM_PROC_COMM_REGULATOR
select MULTI_IRQ_HANDLER
select MSM_PM2 if PM
select HOLES_IN_ZONE if SPARSEMEM
select MSM_MODEM_RESTART
select ARM_HAS_SG_CHAIN
config ARCH_QSD8X50
bool "QSD8X50"
select ARCH_MSM_SCORPION
select MSM_VIC
select CPU_V7
select GPIO_MSM_V1
select MSM_REMOTE_SPINLOCK_LDREX
select CPU_USE_DOMAINS
select EMULATE_DOMAIN_MANAGER_V7
select MSM_GPIOMUX
select MSM_DALRPC
select MSM_PM2 if PM
select MSM_MODEM_RESTART
config ARCH_MSM8X60
bool "MSM8X60"
select ARCH_MSM_SCORPIONMP
select SMP_PARALLEL_START if SMP
select ARM_GIC
select CPU_V7
select MSM_REMOTE_SPINLOCK_LDREX
select ARCH_REQUIRE_GPIOLIB
select MSM_ADM3
select REGULATOR
select MSM_RPM_REGULATOR
select GPIO_MSM_V2
select MSM_PIL
select ARCH_HAS_CPU_IDLE_WAIT
select MSM_DIRECT_SCLK_ACCESS
select MSM_RPM
select MSM_XO
select MSM_GPIOMUX
select MSM_BUS_SCALING
select MSM_SECURE_IO
select MSM_DALRPC
select MSM_QDSP6_APR
select MSM_QDSP6_CODECS
select MSM_NATIVE_RESTART
select ARCH_INLINE_SPIN_TRYLOCK
select ARCH_INLINE_SPIN_TRYLOCK_BH
select ARCH_INLINE_SPIN_LOCK
select ARCH_INLINE_SPIN_LOCK_BH
select ARCH_INLINE_SPIN_LOCK_IRQ
select ARCH_INLINE_SPIN_LOCK_IRQSAVE
select ARCH_INLINE_SPIN_UNLOCK
select ARCH_INLINE_SPIN_UNLOCK_BH
select ARCH_INLINE_SPIN_UNLOCK_IRQ
select ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE
select ARCH_INLINE_READ_TRYLOCK
select ARCH_INLINE_READ_LOCK
select ARCH_INLINE_READ_LOCK_BH
select ARCH_INLINE_READ_LOCK_IRQ
select ARCH_INLINE_READ_LOCK_IRQSAVE
select ARCH_INLINE_READ_UNLOCK
select ARCH_INLINE_READ_UNLOCK_BH
select ARCH_INLINE_READ_UNLOCK_IRQ
select ARCH_INLINE_READ_UNLOCK_IRQRESTORE
select ARCH_INLINE_WRITE_TRYLOCK
select ARCH_INLINE_WRITE_LOCK
select ARCH_INLINE_WRITE_LOCK_BH
select ARCH_INLINE_WRITE_LOCK_IRQ
select ARCH_INLINE_WRITE_LOCK_IRQSAVE
select ARCH_INLINE_WRITE_UNLOCK
select ARCH_INLINE_WRITE_UNLOCK_BH
select ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE
select CPU_HAS_L2_PMU
select MSM_SPM_V1
select MSM_SCM if SMP
select MULTI_IRQ_HANDLER
select MSM_MULTIMEDIA_USE_ION
select MSM_PM8X60 if PM
select MSM_RUN_QUEUE_STATS
select ARM_HAS_SG_CHAIN
select USE_DEV_CTRL_VOLUME
config ARCH_MSM8960
bool "MSM8960"
select ARCH_MSM_KRAITMP
select ARM_GIC
select CPU_V7
select GPIO_MSM_V2
select MSM_GPIOMUX
select MSM_SCM
select MSM_DIRECT_SCLK_ACCESS
select REGULATOR
select MSM_RPM_REGULATOR
select MSM_RPM
select MSM_XO
select MSM_QDSP6_APR
select MSM_QDSP6_CODECS
select MSM_PIL
select MSM_AUDIO_QDSP6 if SND_SOC
select CPU_HAS_L2_PMU
select MSM_SPM_V2
select MSM_L2_SPM
select MSM_NATIVE_RESTART
select DONT_MAP_HOLE_AFTER_MEMBANK0
select MSM_REMOTE_SPINLOCK_SFPB
select ARCH_HAS_HOLES_MEMORYMODEL
select CLEANCACHE
select QCACHE
select MSM_MULTIMEDIA_USE_ION
select MULTI_IRQ_HANDLER
select MSM_PM8X60 if PM
select HOLES_IN_ZONE if SPARSEMEM
select MSM_RUN_QUEUE_STATS
select ARM_HAS_SG_CHAIN
select MSM_KRAIT_WFE_FIXUP
select MSM_ULTRASOUND_A
select MSM_IOMMU_GPU_SYNC
select GENERIC_TIME_VSYSCALL
select USE_USER_ACCESSIBLE_TIMERS
select ARM_USE_USER_ACCESSIBLE_TIMERS
select MSM_USE_USER_ACCESSIBLE_TIMERS
select MSM_CPU_PWRCTL
select MSM_LPM_TEST
config ARCH_MSM8930
bool "MSM8930"
select ARCH_MSM_KRAITMP
select ARM_GIC
select CPU_V7
select GPIO_MSM_V2
select MSM_GPIOMUX
select MSM_SCM
select MSM_DIRECT_SCLK_ACCESS
select REGULATOR
select MSM_RPM_REGULATOR
select MSM_RPM
select MSM_XO
select MSM_QDSP6_APR
select MSM_QDSP6_CODECS
select MSM_PIL
select MSM_AUDIO_QDSP6 if SND_SOC
select CPU_HAS_L2_PMU
select MSM_SPM_V2
select MSM_L2_SPM
select MSM_NATIVE_RESTART
select DONT_MAP_HOLE_AFTER_MEMBANK0
select MSM_REMOTE_SPINLOCK_SFPB
select ARCH_HAS_HOLES_MEMORYMODEL
select MSM_ULTRASOUND_A
select MULTI_IRQ_HANDLER
select MSM_PM8X60 if PM
select HOLES_IN_ZONE if SPARSEMEM
select ARM_HAS_SG_CHAIN
select MSM_KRAIT_WFE_FIXUP
select MSM_IOMMU_GPU_SYNC
select GENERIC_TIME_VSYSCALL
select USE_USER_ACCESSIBLE_TIMERS
select ARM_USE_USER_ACCESSIBLE_TIMERS
select MSM_USE_USER_ACCESSIBLE_TIMERS
select MSM_CPU_PWRCTL
config ARCH_APQ8064
bool "APQ8064"
select ARCH_MSM_KRAITMP
select GPIO_MSM_V2
select ARM_GIC
select CPU_V7
select MSM_SCM
select MSM_GPIOMUX
select MSM_REMOTE_SPINLOCK_SFPB
select MSM_PIL
select MSM_QDSP6_APR
select MSM_QDSP6_CODECS
select MSM_AUDIO_QDSP6 if SND_SOC
select MULTI_IRQ_HANDLER
select MSM_RPM
select MSM_SPM_V2
select MSM_L2_SPM
select MSM_PM8X60 if PM
select CPU_HAS_L2_PMU
select HOLES_IN_ZONE if SPARSEMEM
select CLEANCACHE
select QCACHE
select MIGHT_HAVE_PCI
select ARCH_SUPPORTS_MSI
select ARM_HAS_SG_CHAIN
select MSM_KRAIT_WFE_FIXUP
select MSM_ULTRASOUND_A
select MSM_IOMMU_GPU_SYNC
select GENERIC_TIME_VSYSCALL
select USE_USER_ACCESSIBLE_TIMERS
select ARM_USE_USER_ACCESSIBLE_TIMERS
select MSM_USE_USER_ACCESSIBLE_TIMERS
select MSM_CPU_PWRCTL
config ARCH_MSM8974
bool "MSM8974"
select ARCH_MSM_KRAITMP
select GPIO_MSM_V3
select ARM_GIC
select CPU_V7
select MSM_SCM
select MSM_GPIOMUX
select MULTI_IRQ_HANDLER
select MSM_MULTIMEDIA_USE_ION
select MSM_PIL
select MSM_SPM_V2
select MSM_L2_SPM
select MSM_NATIVE_RESTART
select MSM_RESTART_V2
select MSM_PM8X60 if PM
select MAY_HAVE_SPARSE_IRQ
select SPARSE_IRQ
select MSM_RPM_SMD
select REGULATOR
select MSM_QDSP6_APRV2
select MSM_QDSP6V2_CODECS
select MSM_AUDIO_QDSP6V2 if SND_SOC
select MSM_RPM_REGULATOR_SMD
select ARM_HAS_SG_CHAIN
select MSM_RUN_QUEUE_STATS
select MEMORY_HOLE_CARVEOUT
select MSM_RPM_STATS_LOG
select QMI_ENCDEC
select DONT_MAP_HOLE_AFTER_MEMBANK0
select MSM_ULTRASOUND_B
select MSM_LPM_TEST
select MSM_RPM_LOG
select ARCH_WANT_KMAP_ATOMIC_FLUSH
config ARCH_APQ8084
bool "APQ8084"
select ARCH_MSM_KRAITMP
select GPIO_MSM_V3
select ARM_GIC
select CPU_V7
select MSM_SCM
select MSM_GPIOMUX
select MULTI_IRQ_HANDLER
select MSM_NATIVE_RESTART
select MSM_RESTART_V2
select MSM_PM8X60 if PM
select MAY_HAVE_SPARSE_IRQ
select SPARSE_IRQ
select REGULATOR
select ARM_HAS_SG_CHAIN
select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
select ARCH_WANT_KMAP_ATOMIC_FLUSH
select MEMORY_HOLE_CARVEOUT
select DONT_MAP_HOLE_AFTER_MEMBANK0
select QMI_ENCDEC
config ARCH_MPQ8092
bool "MPQ8092"
select ARCH_MSM_KRAITMP
select GPIO_MSM_V3
select ARM_GIC
select MULTI_IRQ_HANDLER
select CPU_V7
select MSM_GPIOMUX
select MAY_HAVE_SPARSE_IRQ
select SPARSE_IRQ
select MSM_NOPM
config ARCH_FSM9900
bool "FSM9900"
select ARCH_MSM_KRAITMP
select GPIO_MSM_V3
select ARM_GIC
select CPU_V7
select MSM_SCM
select MSM_GPIOMUX
select MULTI_IRQ_HANDLER
select MSM_PIL
select MSM_NATIVE_RESTART
select MSM_RESTART_V2
select MAY_HAVE_SPARSE_IRQ
select SPARSE_IRQ
select REGULATOR
select ARM_HAS_SG_CHAIN
select MSM_RUN_QUEUE_STATS
select MSM_NOPM
config ARCH_FSM9XXX
bool "FSM9XXX"
select ARCH_MSM_SCORPION
select MSM_VIC
select CPU_V7
select MSM_REMOTE_SPINLOCK_LDREX
select GPIO_FSM9XXX
select MULTI_IRQ_HANDLER
select MSM_DALRPC
config ARCH_MSM9615
bool "MSM9615"
select ARM_GIC
select GIC_SECURE
select ARCH_MSM_CORTEX_A5
select CPU_V7
select MIGHT_HAVE_CACHE_L2X0
select GPIO_MSM_V2
select MSM_GPIOMUX
select MSM_RPM
select MSM_SPM_V2
select MSM_NATIVE_RESTART
select REGULATOR
select MSM_RPM_REGULATOR
select MULTI_IRQ_HANDLER
select MSM_PM8X60 if PM
select MSM_XO
select MSM_MULTIMEDIA_USE_ION
select MSM_QDSP6_APR
select MSM_AUDIO_QDSP6 if SND_SOC
select FIQ
select ARM_HAS_SG_CHAIN
config ARCH_MSM8625
bool "MSM8625"
select ARCH_MSM_CORTEX_A5
select CPU_V7
select GPIO_MSM_V1
select MSM_GPIOMUX
select ARM_GIC
select ARCH_MSM_CORTEXMP
select MULTI_IRQ_HANDLER
select ARM_TICKET_LOCKS
select MSM_RUN_QUEUE_STATS
select MIGHT_HAVE_CACHE_L2X0
select ARM_HAS_SG_CHAIN
select CPU_HAS_L2_PMU
config ARCH_MSM9625
bool "MSM9625"
select ARM_GIC
select MIGHT_HAVE_CACHE_L2X0
select ARCH_MSM_CORTEX_A5
select CPU_V7
select MSM_SCM
select MSM_GPIOMUX
select MSM_RPM_SMD
select MSM_NATIVE_RESTART
select MSM_RESTART_V2
select MSM_SPM_V2
select MSM_PM8X60 if PM
select MULTI_IRQ_HANDLER
select GPIO_MSM_V3
select MAY_HAVE_SPARSE_IRQ
select SPARSE_IRQ
select CPU_FREQ_MSM
select MSM_MULTIMEDIA_USE_ION
select MSM_RPM_STATS_LOG
select MSM_QDSP6_APRV2
select MSM_QDSP6V2_CODECS
select MSM_AUDIO_QDSP6V2 if SND_SOC
select CPU_HAS_L2_PMU
select MSM_JTAG_MM if CORESIGHT_ETM
select MEMORY_HOLE_CARVEOUT
select MSM_RPM_LOG
config ARCH_MSMKRYPTON
bool "MSMKRYPTON"
select ARM_GIC
select CPU_V7
select MSM_GPIOMUX
select MSM_RPM_SMD
select MSM_NATIVE_RESTART
select MSM_RESTART_V2
select MSM_SPM_V2
select MSM_PM8X60 if PM
select MULTI_IRQ_HANDLER
select GPIO_MSM_V3
select MAY_HAVE_SPARSE_IRQ
select SPARSE_IRQ
config ARCH_MSM8610
bool "MSM8610"
select ARM_GIC
select GIC_SECURE
select ARCH_MSM_CORTEXMP
select CPU_V7
select MSM_SCM
select MAY_HAVE_SPARSE_IRQ
select SPARSE_IRQ
select MULTI_IRQ_HANDLER
select ARM_TICKET_LOCKS
select GPIO_MSM_V3
select MSM_GPIOMUX
select MSM_NATIVE_RESTART
select MSM_RESTART_V2
select MSM_QDSP6_APRV2
select MSM_QDSP6V2_CODECS
select MSM_AUDIO_QDSP6V2 if SND_SOC
select QMI_ENCDEC
select MSM_RPM_SMD
select MSM_SPM_V2
select MSM_L2_SPM
select MSM_PM8X60 if PM
select MEMORY_HOLE_CARVEOUT
select DONT_MAP_HOLE_AFTER_MEMBANK0
select MSM_BUS_SCALING
select CPU_FREQ_MSM
select CPU_FREQ
select MSM_PIL
select MSM_RUN_QUEUE_STATS
select ARM_HAS_SG_CHAIN
select REGULATOR
select MSM_RPM_REGULATOR_SMD
select MSM_SPM_REGULATOR
select MSM_JTAG_MM if CORESIGHT_ETM
select MSM_CPR_REGULATOR
select MSM_RPM_LOG
select MSM_RPM_STATS_LOG
config ARCH_MSM8226
bool "MSM8226"
select ARM_GIC
select GIC_SECURE
select ARCH_MSM_CORTEXMP
select CPU_V7
select MSM_SCM
select MAY_HAVE_SPARSE_IRQ
select SPARSE_IRQ
select MULTI_IRQ_HANDLER
select ARM_TICKET_LOCKS
select GPIO_MSM_V3
select MSM_GPIOMUX
select MSM_NATIVE_RESTART
select MSM_RESTART_V2
select MSM_QDSP6_APRV2
select MSM_QDSP6V2_CODECS
select MSM_AUDIO_QDSP6V2 if SND_SOC
select QMI_ENCDEC
select MSM_RPM_SMD
select MSM_SPM_V2
select MSM_L2_SPM
select MSM_PM8X60 if PM
select MEMORY_HOLE_CARVEOUT
select DONT_MAP_HOLE_AFTER_MEMBANK0
select MSM_BUS_SCALING
select CPU_FREQ_MSM
select CPU_FREQ
select MSM_PIL
select MSM_RUN_QUEUE_STATS
select ARM_HAS_SG_CHAIN
select REGULATOR
select MSM_RPM_REGULATOR_SMD
select MSM_SPM_REGULATOR
select MSM_JTAG_MM if CORESIGHT_ETM
select MSM_CPR_REGULATOR
select MSM_RPM_LOG
select MSM_RPM_STATS_LOG
select ARCH_WANT_KMAP_ATOMIC_FLUSH
config ARCH_MSMSAMARIUM
bool "MSMSAMARIUM"
select ARCH_MSM_KRAITMP
select GPIO_MSM_V3
select ARM_GIC
select CPU_V7
select MSM_SCM
select MSM_GPIOMUX
select MULTI_IRQ_HANDLER
select MSM_SPM_V2
select MSM_L2_SPM
select MSM_NATIVE_RESTART
select MSM_RESTART_V2
select MSM_PM8X60 if PM
select MAY_HAVE_SPARSE_IRQ
select SPARSE_IRQ
select ARM_HAS_SG_CHAIN
select MSM_RUN_QUEUE_STATS
select ARCH_WANT_KMAP_ATOMIC_FLUSH
endmenu
choice
prompt "MSM SoC Revision"
default MSM_SOC_REV_NONE
config MSM_SOC_REV_NONE
bool "N/A"
select EMULATE_DOMAIN_MANAGER_V7 if ARCH_QSD8X50
select VERIFY_PERMISSION_FAULT if ARCH_QSD8X50
config MSM_SOC_REV_A
bool "Rev. A"
select ARCH_MSM7X27A if ARCH_MSM7X27
endchoice
config MSM_KRAIT_TBB_ABORT_HANDLER
bool "Krait TBB/TBH data abort handler"
depends on ARCH_MSM_KRAIT
depends on ARM_THUMB
help
Certain early samples of the Krait processor may generate data
aborts for TBB / TBH instructions that fail their condition code
checks. Enabling this option will ignore these erroneous data aborts,
at the expense of a very small performance penalty.
If unsure, say N.
config ARCH_MSM_ARM11
bool
config ARCH_MSM_SCORPION
bool
config ARCH_MSM_KRAIT
bool
select ARM_L1_CACHE_SHIFT_6
config MSM_SMP
select HAVE_SMP
bool
config ARCH_MSM_SCORPIONMP
select ARCH_MSM_SCORPION
select MSM_SMP
select HAVE_ARCH_HAS_CURRENT_TIMER
select MSM_JTAG if CORESIGHT_ETM
bool
config ARCH_MSM_KRAITMP
select ARCH_MSM_KRAIT
select MSM_SMP
select HAVE_ARCH_HAS_CURRENT_TIMER
select MSM_JTAG if CORESIGHT_ETM
bool
config ARCH_MSM_CORTEXMP
select MSM_SMP
bool
config MSM_KRAIT_WFE_FIXUP
bool
config MSM_RESTART_V2
bool
config ARCH_MSM_CORTEX_A5
bool
config ARCH_MSM7X27A
bool
select MSM_DALRPC
select MSM_PROC_COMM_REGULATOR
select MULTI_IRQ_HANDLER
select ARM_GIC
select ARCH_MSM_CORTEXMP
select MIGHT_HAVE_CACHE_L2X0
select ARM_HAS_SG_CHAIN
select CPU_HAS_L2_PMU
config MSM_VIC
bool
config MSM_RPM
bool "Resource Power Manager"
select MSM_MPM
config MSM_RPM_SMD
depends on MSM_SMD
select MSM_MPM_OF
bool "RPM driver using SMD protocol"
help
RPM is the dedicated hardware engine for managing shared SoC
resources. This config adds driver support for using SMD as a
transport layer communication with RPM hardware. It also selects
the MSM_MPM config that programs the MPM module to monitor interrupts
during sleep modes.
config MSM_MPM
bool "Modem Power Manager"
help
MPM is a dedicated hardware resource responsible for entering and
waking up from a system wide low power mode. The MPM driver tracks
the wakeup interrupts and configures the MPM to monitor the wakeup
interrupts when going to a system wide sleep mode.
config MSM_MPM_OF
bool "Modem Power Manager"
depends on OF
help
MPM is a dedicated hardware resource responsible for entering and
waking up from a system wide low power mode. The MPM driver tracks
the wakeup interrupts and configures the MPM to monitor the wakeup
interrupts when going to a system wide sleep mode. This config option
enables the MPM driver that supports initialization from a device
tree
config MSM_LPM_TEST
bool "Low Power Mode test framework"
depends on MSM_RPM || MSM_RPM_SMD
depends on MSM_PM8X60
help
LPM_TEST is a test framework that assists in exercising the low
power mode algorithm on MSM targets. This test framework tracks
notifications sent during entry/exit of the low power modes and
processes them to measure various stats including latency
measurement.
config MSM_XO
bool
config MSM_REMOTE_SPINLOCK_DEKKERS
bool
config MSM_REMOTE_SPINLOCK_SWP
bool
config MSM_REMOTE_SPINLOCK_LDREX
bool
config MSM_REMOTE_SPINLOCK_SFPB
bool
config MSM_ADM3
bool
menu "MSM Board Selection"
config MACH_HALIBUT
depends on ARCH_MSM7X01A
depends on MSM_STACKED_MEMORY
default y
bool "Halibut Board (QCT SURF7201A)"
help
Support for the Qualcomm SURF7201A eval board.
config MACH_MSM7201A_SURF
depends on ARCH_MSM7X01A
depends on MSM_STACKED_MEMORY
default y
bool "MSM7201A SURF"
help
Support for the Qualcomm MSM7201A SURF eval board.
config MACH_MSM7201A_FFA
depends on ARCH_MSM7X01A
depends on MSM_STACKED_MEMORY
default y
bool "MSM7201A FFA"
help
Support for the Qualcomm MSM7201A FFA eval board.
config MACH_TROUT
depends on ARCH_MSM7X01A
depends on MSM_STACKED_MEMORY
default y
bool "Trout"
config MACH_MSM7X27_SURF
depends on ARCH_MSM7X27
depends on !MSM_STACKED_MEMORY
default y
bool "MSM7x27 SURF"
help
Support for the Qualcomm MSM7x27 SURF eval board.
config MACH_MSM7X27_FFA
depends on ARCH_MSM7X27
depends on !MSM_STACKED_MEMORY
default y
bool "MSM7x27 FFA"
help
Support for the Qualcomm MSM7x27 FFA eval board.
config MACH_MSM7X27A_RUMI3
depends on ARCH_MSM7X27A
depends on !MSM_STACKED_MEMORY
default y
bool "MSM7x27A RUMI3"
help
Support for the Qualcomm MSM7x27A RUMI3 Emulation Platform.
config MACH_MSM7X27A_SURF
depends on ARCH_MSM7X27A
depends on !MSM_STACKED_MEMORY
default y
bool "MSM7x27A SURF"
help
Support for the Qualcomm MSM7x27A SURF.
config MACH_MSM7X27A_FFA
depends on ARCH_MSM7X27A
depends on !MSM_STACKED_MEMORY
default y
bool "MSM7x27A FFA"
help
Support for the Qualcomm MSM7x27A FFA.
config MACH_MSM7625A_SURF
depends on ARCH_MSM7X27A
depends on !MSM_STACKED_MEMORY
default y
bool "MSM7625A SURF"
help
Support for the Qualcomm MSM7625A SURF.
config MACH_MSM7625A_FFA
depends on ARCH_MSM7X27A
depends on !MSM_STACKED_MEMORY
default y
bool "MSM7625A FFA"
help
Support for the Qualcomm MSM7625A FFA.
config MACH_MSM7627A_QRD1
depends on ARCH_MSM7X27A
depends on !MSM_STACKED_MEMORY
default y
bool "MSM7627A QRD1"
help
Support for the Qualcomm MSM7627A Reference Design.
config MACH_MSM7627A_QRD3
depends on ARCH_MSM7X27A
depends on !MSM_STACKED_MEMORY
default y
bool "MSM7627A QRD3"
help
Support for the Qualcomm MSM7627A Reference Design.
config MACH_MSM7627A_EVB
depends on ARCH_MSM7X27A
depends on !MSM_STACKED_MEMORY
default y
bool "MSM7627A EVB"
help
Support for the Qualcomm MSM7627A Reference Design.
config MACH_MSM8625_RUMI3
depends on ARCH_MSM8625
depends on !MSM_STACKED_MEMORY
default y
bool "MSM8625 RUMI3"
help
Support for the Qualcomm MSM8625 RUMI3 Emulation Platform.
config MACH_MSM8625_SURF
depends on ARCH_MSM8625
depends on !MSM_STACKED_MEMORY
default y
bool "MSM8625 SURF"
help
Support for the Qualcomm MSM8625 SURF.
config MACH_MSM8625_FFA
depends on ARCH_MSM8625
depends on !MSM_STACKED_MEMORY
default y
bool "MSM8625 FFA"
help
Support for the Qualcomm MSM8625 FFA.
config MACH_MSM8625_EVB
depends on ARCH_MSM8625
depends on !MSM_STACKED_MEMORY
default y
bool "MSM8625 EVB"
help
Support for the Qualcomm MSM8625 Reference Design.
config MACH_MSM8625_QRD7
depends on ARCH_MSM8625
depends on !MSM_STACKED_MEMORY
default y
bool "MSM8625 QRD7"
help
Support for the Qualcomm MSM8625 Reference Design.
config MACH_MSM8625_EVT
depends on ARCH_MSM8625
depends on !MSM_STACKED_MEMORY
default y
bool "MSM8625 EVT"
help
Support for the Qualcomm MSM8625 Reference Design.
config MACH_QRD_SKUD_PRIME
depends on ARCH_MSM8625
depends on !MSM_STACKED_MEMORY
default y
bool "MSM8625 SKUD PRIME"
help
Support for the Qualcomm MSM8625 SKUD prime Reference Design.
Add support for a SKUD prime reference design based on MSM8x25
chipset. This device is much closer to a phone than regular form
factor devices, with new touch, display panel and other hardware
configurations.
config MACH_MSM7X30_SURF
depends on ARCH_MSM7X30
depends on !MSM_STACKED_MEMORY
default y
bool "MSM7x30 SURF"
help
Support for the Qualcomm MSM7x30 SURF eval board.
config MACH_MSM7X30_FFA
depends on ARCH_MSM7X30
depends on !MSM_STACKED_MEMORY
default y
bool "MSM7x30 FFA"
help
Support for the Qualcomm MSM7x30 FFA eval board.
config MACH_MSM7X30_FLUID
depends on ARCH_MSM7X30
depends on !MSM_STACKED_MEMORY
default y
bool "MSM7x30 FLUID"
help
Support for the Qualcomm MSM7x30 FLUID eval board.
config MACH_SAPPHIRE
depends on ARCH_MSM7X01A
default n
bool "Sapphire"
config MACH_QSD8X50_SURF
depends on ARCH_QSD8X50
depends on MSM_SOC_REV_NONE
depends on MSM_STACKED_MEMORY
default y
bool "QSD8x50 SURF"
help
Support for the Qualcomm QSD8x50 SURF eval board.
config MACH_QSD8X50_FFA
depends on ARCH_QSD8X50
depends on MSM_SOC_REV_NONE
depends on MSM_STACKED_MEMORY
default y
bool "QSD8x50 FFA"
help
Support for the Qualcomm QSD8x50 FFA eval board.
config MACH_MSM7X25_SURF
depends on ARCH_MSM7X25
depends on !MSM_STACKED_MEMORY
default y
bool "MSM7x25 SURF"
help
Support for the Qualcomm MSM7x25 SURF eval board.
config MACH_MSM7X25_FFA
depends on ARCH_MSM7X25
depends on !MSM_STACKED_MEMORY
default y
bool "MSM7x25 FFA"
help
Support for the Qualcomm MSM7x25 FFA eval board.
config MACH_MSM8X55_SURF
depends on ARCH_MSM7X30
depends on !MSM_STACKED_MEMORY
default y
bool "MSM8X55 SURF"
help
Support for the Qualcomm MSM8x55 SURF eval board.
config MACH_MSM8X55_FFA
depends on ARCH_MSM7X30
depends on !MSM_STACKED_MEMORY
default y
bool "MSM8X55 FFA"
help
Support for the Qualcomm MSM8x55 FFA eval board.
config MACH_MSM8X55_SVLTE_FFA
depends on ARCH_MSM7X30
depends on !MSM_STACKED_MEMORY
default y
bool "MSM8X55 SVLTE FFA"
help
Support for the Qualcomm MSM8x55 SVLTE FFA eval board.
config MACH_MSM8X55_SVLTE_SURF
depends on ARCH_MSM7X30
depends on !MSM_STACKED_MEMORY
default y
bool "MSM8X55 SVLTE SURF"
help
Support for the Qualcomm MSM8x55 SVLTE SURF eval board.
config MACH_MSM8X60_SURF
depends on ARCH_MSM8X60
default n
bool "MSM8x60 SURF"
help
Support for the Qualcomm MSM8x60 SURF eval board.
config MACH_MSM8X60_FFA
depends on ARCH_MSM8X60
default n
bool "MSM8x60 FFA"
help
Support for the Qualcomm MSM8x60 FFA eval board.
config MACH_MSM8X60_FLUID
depends on ARCH_MSM8X60
default n
bool "MSM8x60 FLUID"
help
Support for the Qualcomm MSM8x60 FLUID platform. The FLUID is an
8x60 target which has a form factor that is much closer to that
of a phone than other targets. It also has a new display and
touchscreen controller.
config MACH_MSM8X60_FUSION
depends on ARCH_MSM8X60
default n
bool "MSM8x60 FUSION"
help
Support for the Qualcomm MSM8x60 Fusion SURF device.
config MACH_MSM8X60_FUSN_FFA
depends on ARCH_MSM8X60
default n
bool "MSM8x60 FUSN FFA"
help
Support for the Qualcomm MSM8x60 Fusion FFA device.
config MACH_MSM8X60_DRAGON
depends on ARCH_MSM8X60
default n
bool "MSM8x60 DRAGON"
help
Support for the Qualcomm MSM8x60 Dragon board.
config MACH_MSM8960_CDP
depends on ARCH_MSM8960
bool "MSM8960 CDP"
help
Support for the Qualcomm MSM8960 CDP device.
config MACH_MSM8960_MTP
depends on ARCH_MSM8960
bool "MSM8960 MTP"
help
Support for the Qualcomm MSM8960 MTP device.
config MACH_MSM8960_FLUID
depends on ARCH_MSM8960
bool "MSM8960 FLUID"
help
Support for the Qualcomm MSM8960 FLUID device.
config MACH_MSM8960_LIQUID
depends on ARCH_MSM8960
bool "MSM8960 LIQUID"
help
Support for the Qualcomm MSM8960 LIQUID device.
config MACH_MSM8930_CDP
depends on ARCH_MSM8930
bool "MSM8930 CDP"
help
Support for the Qualcomm MSM8930 CDP device.
config MACH_MSM8930_MTP
depends on ARCH_MSM8930
bool "MSM8930 MTP"
help
Support for the Qualcomm MSM8930 MTP device.
config MACH_MSM8930_FLUID
depends on ARCH_MSM8930
bool "MSM8930 FLUID"
help
Support for the Qualcomm MSM8930 FLUID device.
config MACH_MSM8627_CDP
depends on ARCH_MSM8930
bool "MSM8627 CDP"
help
Support for the Qualcomm MSM8627 CDP device.
config MACH_MSM8627_MTP
depends on ARCH_MSM8930
bool "MSM8627 MTP"
help
Support for the Qualcomm MSM8627 MTP device.
config MACH_MSM9615_CDP
depends on ARCH_MSM9615
bool "MSM9615 CDP"
help
Support for the Qualcomm MSM9615 CDP device.
config MACH_MSM9615_MTP
depends on ARCH_MSM9615
bool "MSM9615 MTP"
help
Support for the Qualcomm MSM9615 MTP device.
config MSM_USE_TSIF1
depends on ARCH_MSM8X60
bool "MSM8x60 use TSIF1"
help
Selects TSIF1 core to be used rather than TSIF0.
The two TSIF cores share the same DM configuration
so they cannot be used simultaneously.
config MACH_APQ8064_CDP
depends on ARCH_APQ8064
bool "APQ8064 CDP"
help
Support for the Qualcomm APQ8064 CDP device.
config MACH_FSM8064_EP
depends on ARCH_APQ8064
bool "FSM8064 EP"
help
Support for the Qualcomm FSM8064 EP device.
This board also known as Femto development platform (FDP)
is based on APQ8064 chipset. This board does not support
keyboard, display or multimedia.
config MACH_APQ8064_MTP
depends on ARCH_APQ8064
bool "APQ8064 MTP"
help
Support for the Qualcomm APQ8064 MTP device.
config MACH_APQ8064_LIQUID
depends on ARCH_APQ8064
bool "APQ8064 LIQUID"
help
Support for the Qualcomm APQ8064 LIQUID device.
config MACH_MPQ8064_CDP
depends on ARCH_APQ8064
bool "MPQ8064 CDP"
help
Support for the Qualcomm MPQ8064 CDP device.
config MACH_MPQ8064_HRD
depends on ARCH_APQ8064
bool "MPQ8064 HRD"
help
Support for the Qualcomm MPQ8064 HRD device.
config MACH_MPQ8064_DTV
depends on ARCH_APQ8064
bool "MPQ8064 DTV"
help
Support for the Qualcomm MPQ8064 DTV device.
config MACH_FSM9XXX_SURF
depends on ARCH_FSM9XXX
depends on !MSM_STACKED_MEMORY
default y
bool "FSM9XXX SURF"
help
Support for the Qualcomm FSM9xxx femtocell
chipset based SURF evaluation board and
FFA board.
endmenu
config MSM_STACKED_MEMORY
bool "Stacked Memory"
default y
help
This option is used to indicate the presence of on-die stacked
memory. When present this memory bank is used for a high speed
shared memory interface. When not present regular RAM is used.
config PHYS_OFFSET
hex
default "0x40800000" if ARCH_MSM9615
default "0x80200000" if ARCH_APQ8064
default "0x80200000" if ARCH_MSM8960
default "0x80200000" if ARCH_MSM8930
default "0x00000000" if ARCH_MSM8974
default "0x00000000" if ARCH_APQ8084
default "0x00000000" if ARCH_MPQ8092
default "0x00000000" if ARCH_MSM8226
default "0x00000000" if ARCH_MSM8610
default "0x00000000" if ARCH_MSMSAMARIUM
default "0x10000000" if ARCH_FSM9XXX
default "0x00000000" if ARCH_FSM9900
default "0x00300000" if ARCH_MSM9625
default "0x00000000" if ARCH_MSMKRYPTON
default "0x00200000" if !MSM_STACKED_MEMORY
default "0x00000000" if ARCH_QSD8X50 && MSM_SOC_REV_A
default "0x20000000" if ARCH_QSD8X50
default "0x40200000" if ARCH_MSM8X60
default "0x10000000"
config KERNEL_MSM_CONTIG_MEM_REGION
bool "Enable in-kernel contiguous memory region"
default y if ARCH_MSM8X60
depends on ARCH_MSM8X60 || ARCH_MSM8960 || ARCH_MSM8974
help
Enable the in-kernel contiguous memory allocator. Sets up a
region of physically contiguous memory. This memory is
reserved during initialization, and can be used
generically.
config KERNEL_PMEM_SMI_REGION
bool "Enable in-kernel PMEM region for SMI"
default y if ARCH_MSM8X60
depends on (ARCH_QSD8X50 && !PMEM_GPU0) || (ARCH_MSM8X60 && !VCM)
help
Enable the in-kernel PMEM allocator to use SMI memory.
config PMEM_GPU0
bool "Enable PMEM GPU0 region"
default y
depends on ARCH_QSD8X50
help
Enable the PMEM GPU0 device on SMI Memory.
config MSM_AMSS_VERSION
int
default 6210 if MSM_AMSS_VERSION_6210
default 6220 if MSM_AMSS_VERSION_6220
default 6225 if MSM_AMSS_VERSION_6225
choice
prompt "AMSS modem firmware version"
default MSM_AMSS_VERSION_6225
config MSM_AMSS_VERSION_6210
bool "6.2.10"
config MSM_AMSS_VERSION_6220
bool "6.2.20"
config MSM_AMSS_VERSION_6225
bool "6.2.20 + New ADSP"
endchoice
config MSM_HAS_DEBUG_UART_HS
bool
help
Say Y here if high speed MSM UART is present.
config MSM_HAS_DEBUG_UART_HS_V14
bool
select MSM_HAS_DEBUG_UART_HS
help
Say Y here if high speed MSM UART v1.4 is present.
config MSM_DEBUG_UART_PHYS
hex
default 0xA9A00000 if (ARCH_MSM7X27 || ARCH_QSD8X50) && DEBUG_MSM_UART1
default 0xACA00000 if ARCH_MSM7X30 && DEBUG_MSM_UART1
default 0x94000000 if ARCH_FSM9XXX && DEBUG_MSM_UART1
default 0xA9B00000 if (ARCH_MSM7X27 || ARCH_QSD8X50) && DEBUG_MSM_UART2
default 0xACB00000 if ARCH_MSM7X30 && DEBUG_MSM_UART2
default 0x94100000 if ARCH_FSM9XXX && DEBUG_MSM_UART2
default 0xA9C00000 if (ARCH_MSM7X27 || ARCH_QSD8X50) && DEBUG_MSM_UART3
default 0xACC00000 if ARCH_MSM7X30 && DEBUG_MSM_UART3
choice
prompt "Debug UART"
depends on DEBUG_LL
config DEBUG_MSM_UART1
bool "Kernel low-level debugging messages via MSM UART1"
depends on ARCH_MSM7X27 || ARCH_MSM7X30 || ARCH_QSD8X50 || ARCH_FSM9XXX
help
Say Y here if you want the debug print routines to direct
their output to the first serial port on MSM devices.
config DEBUG_MSM_UART2
bool "Kernel low-level debugging messages via MSM UART2"
depends on ARCH_MSM7X27 || ARCH_MSM7X30 || ARCH_QSD8X50 || ARCH_FSM9XXX
help
Say Y here if you want the debug print routines to direct
their output to the second serial port on MSM devices.
config DEBUG_MSM_UART3
bool "Kernel low-level debugging messages via MSM UART3"
depends on ARCH_MSM7X27 || ARCH_MSM7X30 || ARCH_QSD8X50
help
Say Y here if you want the debug print routines to direct
their output to the third serial port on MSM devices.
config DEBUG_MSM8660_UART
bool "Kernel low-level debugging messages via MSM 8660 UART"
depends on ARCH_MSM8X60
select MSM_HAS_DEBUG_UART_HS
help
Say Y here if you want the debug print routines to direct
their output to the serial port on MSM 8660 devices.
config DEBUG_MSM8960_UART
bool "Kernel low-level debugging messages via MSM 8960 UART"
depends on ARCH_MSM8960 && DEBUG_LL
select MSM_HAS_DEBUG_UART_HS
help
Say Y here if you want the debug print routines to direct
their output to the serial port on MSM 8960 devices.
config DEBUG_MSM8930_UART
bool "Kernel low-level debugging messages via MSM 8930 UART"
depends on ARCH_MSM8930 && DEBUG_LL
select MSM_HAS_DEBUG_UART_HS
help
Say Y here if you want the debug print routines to direct
their output to the serial port on MSM 8930 devices.
config DEBUG_APQ8064_UART
bool "Kernel low-level debugging messages via APQ 8064 UART"
depends on ARCH_APQ8064 && DEBUG_LL
select MSM_HAS_DEBUG_UART_HS
help
Say Y here if you want the debug print routines to direct
their output to the serial port on APQ 8064 devices.
config DEBUG_MSM8974_UART
bool "Kernel low-level debugging messages via MSM 8974 UART"
depends on ARCH_MSM8974
select MSM_HAS_DEBUG_UART_HS_V14
help
Say Y here if you want the debug print routines to direct
their output to the serial port on MSM 8974 devices.
config DEBUG_MPQ8092_UART
bool "Kernel low-level debugging messages via MPQ8092 UART"
depends on ARCH_MPQ8092
select MSM_HAS_DEBUG_UART_HS_V14
help
Say Y here if you want the debug print routines to direct
their output to the serial port on MPQ8092 devices.
config DEBUG_APQ8084_UART
bool "Kernel low-level debugging messages via APQ8084 UART"
depends on ARCH_APQ8084
select MSM_HAS_DEBUG_UART_HS_V14
help
Say Y here if you want the debug print routines to direct
their output to the serial port on APQ8084 devices.
config DEBUG_MSM9625_UART
bool "Kernel low-level debugging messages via MSM9625 UART"
depends on ARCH_MSM9625
select MSM_HAS_DEBUG_UART_HS_V14
help
Say Y here if you want the debug print routines to direct
their output to the serial port on MSM9625 devices.
config DEBUG_FSM9900_UART
bool "Kernel low-level debugging messages via FSM9900 UART"
depends on ARCH_FSM9900
select MSM_HAS_DEBUG_UART_HS_V14
help
Say Y here if you want the debug print routines to direct
their output to the serial port on FSM9900 devices.
config DEBUG_MSMSAMARIUM_UART
bool "Kernel low-level debugging messages via MSM SAMARIUM UART"
depends on ARCH_MSMSAMARIUM
select MSM_HAS_DEBUG_UART_HS_V14
help
Say Y here if you want the debug print routines to direct
their output to the serial port on MSM SAMARIUM devices.
endchoice
choice
prompt "Default Timer"
default MSM7X00A_USE_GP_TIMER
config MSM7X00A_USE_GP_TIMER
bool "GP Timer"
help
Low resolution timer that allows power collapse from idle.
config MSM7X00A_USE_DG_TIMER
bool "DG Timer"
help
High resolution timer.
endchoice
choice
prompt "Suspend sleep mode"
default MSM7X00A_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
help
Allows overriding the sleep mode used. Leave at power
collapse suspend unless the arm9 image has problems.
config MSM7X00A_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
bool "Power collapse suspend"
help
Lowest sleep state. Returns through reset vector.
config MSM7X00A_SLEEP_MODE_POWER_COLLAPSE
bool "Power collapse"
help
Sleep state that returns through reset vector.
config MSM7X00A_SLEEP_MODE_APPS_SLEEP
bool "Apps Sleep"
config MSM7X00A_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
bool "Ramp down cpu clock and wait for interrupt"
config MSM7X00A_SLEEP_WAIT_FOR_INTERRUPT
bool "Wait for interrupt"
endchoice
config MSM7X00A_SLEEP_MODE
int
default 0 if MSM7X00A_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
default 1 if MSM7X00A_SLEEP_MODE_POWER_COLLAPSE
default 2 if MSM7X00A_SLEEP_MODE_APPS_SLEEP
default 3 if MSM7X00A_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
default 4 if MSM7X00A_SLEEP_WAIT_FOR_INTERRUPT
choice
prompt "Idle sleep mode"
default MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE
help
Allows overriding the sleep mode used from idle. Leave at power
collapse suspend unless the arm9 image has problems.
config MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
bool "Power collapse suspend"
help
Lowest sleep state. Returns through reset vector.
config MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE
bool "Power collapse"
help
Sleep state that returns through reset vector.
config MSM7X00A_IDLE_SLEEP_MODE_APPS_SLEEP
bool "Apps Sleep"
config MSM7X00A_IDLE_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
bool "Ramp down cpu clock and wait for interrupt"
config MSM7X00A_IDLE_SLEEP_WAIT_FOR_INTERRUPT
bool "Wait for interrupt"
endchoice
config MSM7X00A_IDLE_SLEEP_MODE
int
default 0 if MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
default 1 if MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE
default 2 if MSM7X00A_IDLE_SLEEP_MODE_APPS_SLEEP
default 3 if MSM7X00A_IDLE_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
default 4 if MSM7X00A_IDLE_SLEEP_WAIT_FOR_INTERRUPT
config MSM7X00A_IDLE_SLEEP_MIN_TIME
int "Minimum idle time before sleep"
default 20000000
help
Minimum idle time in nanoseconds before entering low power mode.
config MSM7X00A_IDLE_SPIN_TIME
int "Idle spin time before cpu ramp down"
default 80000
help
Spin time in nanoseconds before ramping down cpu clock and entering
any low power state.
menuconfig MSM_IDLE_STATS
bool "Collect idle statistics"
default y
help
Collect idle statistics and export them in proc/msm_pm_stats.
if MSM_IDLE_STATS
config MSM_IDLE_STATS_FIRST_BUCKET
int "First bucket time"
default 62500
help
Upper time limit in nanoseconds of first bucket.
config MSM_IDLE_STATS_BUCKET_SHIFT
int "Bucket shift"
default 2
config MSM_IDLE_STATS_BUCKET_COUNT
int "Bucket count"
default 10
config MSM_SUSPEND_STATS_FIRST_BUCKET
int "First bucket time for suspend"
default 1000000000
help
Upper time limit in nanoseconds of first bucket of the
histogram. This is for collecting statistics on suspend.
endif # MSM_IDLE_STATS
config CPU_HAS_L2_PMU
bool "L2CC PMU Support"
help
Select this if the L2 cache controller has a Performance Monitoring Unit.
config HTC_HEADSET
tristate "HTC 2 Wire detection driver"
default n
help
Provides support for detecting HTC 2 wire devices, such as wired
headset, on the trout platform. Can be used with the msm serial
debugger, but not with serial console.
config TROUT_BATTCHG
depends on MACH_TROUT && POWER_SUPPLY
default y
bool "Trout battery / charger driver"
config HTC_PWRSINK
depends on MSM_SMD
default n
bool "HTC Power Sink Driver"
config QSD_SVS
bool "QSD Static Voltage Scaling"
depends on (MACH_QSD8X50_SURF || MACH_QSD8X50_FFA)
default y
select TPS65023
help
Enables static voltage scaling using the TPS65023 PMIC.
config QSD_PMIC_DEFAULT_DCDC1
int "PMIC default output voltage"
depends on (MACH_QSD8X50_SURF || MACH_QSD8X50_FFA)
default 1250
help
This is the PMIC voltage at Linux kernel boot.
config MSM_FIQ_SUPPORT
default y
bool "Enable installation of an FIQ handler."
config MSM_SERIAL_DEBUGGER
select MSM_FIQ_SUPPORT
select KERNEL_DEBUGGER_CORE
default n
bool "FIQ Mode Serial Debugger"
help
The FIQ serial debugger can accept commands even when the
kernel is unresponsive due to being stuck with interrupts
disabled. Depends on the kernel debugger core in drivers/misc.
config MSM_SERIAL_DEBUGGER_CONSOLE
depends on MSM_SERIAL_DEBUGGER
default n
bool "Console on FIQ Serial Debugger port"
help
Enables a console so that printk messages are displayed on
the debugger serial port as the occur.
config MSM_PROC_COMM
default y
bool "Proc-Comm RPC Interface"
help
Enables a lightweight communications interface to the
baseband processor.
config MSM_SMD
bool "MSM Shared Memory Driver (SMD)"
help
Support for the shared memory interface between the apps
processor and the baseband processor. Provides access to
the "shared heap", as well as virtual serial channels
used to communicate with various services on the baseband
processor.
choice
prompt "MSM Shared memory interface version"
depends on MSM_SMD
default MSM_SMD_PKG3 if ARCH_MSM_ARM11
default MSM_SMD_PKG4 if ARCH_MSM_SCORPION
config MSM_SMD_PKG3
bool
prompt "Package 3"
config MSM_SMD_PKG4
bool
prompt "Package 4"
endchoice
config MSM_PCIE
bool "MSM PCIe Controller driver"
depends on PCI && PCI_MSI
help
Enables the PCIe functionality by configures PCIe core on
MSM chipset and by enabling the ARM PCI framework extension.
config MSM_RPC_SDIO_XPRT
depends on MSM_SDIO_AL
default y
bool "MSM SDIO XPRT Layer"
help
SDIO Transport Layer for RPC Rouer
config MSM_RPC_SDIO_DEBUG
depends on MSM_RPC_SDIO_XPRT
default y
bool "MSM SDIO XPRT debug support"
help
Support for debugging SDIO XPRT
config MSM_SMD_DEBUG
depends on MSM_SMD
default y
bool "MSM SMD debug support"
help
Support for debugging the SMD for communication
between the ARM9 and ARM11
config MSM_SDIO_AL
depends on ((ARCH_MSM7X30 || MACH_MSM8X60_FUSN_FFA || MACH_TYPE_MSM8X60_FUSION) && HAS_WAKELOCK)
default y
tristate "SDIO-Abstraction-Layer"
help
Support MSM<->MDM Communication over SDIO bus.
MDM SDIO-Client should have pipes support.
config MSM_SDIO_DMUX
bool "SDIO Data Mux Driver"
depends on MSM_SDIO_AL
default n
help
Support Muxed Data Channels over SDIO interface.
config MSM_BAM_DMUX
bool "BAM Data Mux Driver"
depends on SPS
default n
help
Support Muxed Data Channels over BAM interface.
BAM has a limited number of pipes. This driver
provides a means to support more logical channels
via muxing than BAM could without muxing.
config MSM_N_WAY_SMD
depends on (MSM_SMD && !(ARCH_MSM7X01A))
default y
bool "MSM N-WAY SMD support"
help
Supports APPS-QDSP SMD communication along with
normal APPS-MODEM SMD communication.
config MSM_N_WAY_SMSM
depends on (MSM_SMD && !(ARCH_MSM7X01A))
default y
bool "MSM N-WAY SMSM support"
help
Supports APPS-QDSP SMSM communication along with
normal APPS-MODEM SMSM communication.
config MSM_SMP2P
bool "SMSM Point-to-Point (SMP2P)"
depends on MSM_SMD
help
Provide point-to-point remote signaling support.
SMP2P enables transferring 32-bit values between
the local and a remote system using shared
memory and interrupts. A client can open multiple
32-bit values by specifying a unique string and
remote processor ID.
config MSM_SMP2P_TEST
bool "SMSM Point-to-Point Test"
depends on MSM_SMP2P
help
Enables loopback and unit testing support for
SMP2P. Loopback support is used by other
processors to do unit testing. Unit tests
are used to verify the local and remote
implementations.
config MSM_RESET_MODEM
tristate "Reset Modem Driver"
depends on MSM_SMD
default m
help
Allows the user to reset the modem through a device node.
config MSM_SMD_LOGGING
depends on MSM_SMD
default y
bool "MSM Shared Memory Logger"
help
This option exposes the shared memory logger at /dev/smem_log
and a debugfs node named smem_log.
If in doubt, say yes.
config MSM_IPC_LOGGING
bool "MSM Debug Logging for IPC Drivers"
help
This option allows the debug logging for IPC Drivers.
If in doubt, say no.
config MSM_SMD_NMEA
bool "NMEA GPS Driver"
depends on MSM_SMD
default y
help
Enable this to support the NMEA GPS device.
If in doubt, say yes.
config MSM_SDIO_TTY
bool "SDIO TTY Driver"
depends on MSM_SDIO_AL
default n
help
Provides a TTY driver SDIO TTY
This driver can be used by user space
applications for passing data through the
SDIO interface.
config MSM_SMD_TTY
bool "SMD TTY Driver"
depends on MSM_SMD
default y
help
Provides TTY interfaces to interact with the modem.
If in doubt, say yes.
config MSM_SMD_QMI
bool "SMD QMI Driver"
depends on MSM_SMD
default y
help
Manages network data connections.
If in doubt, say yes.
config MSM_SMD_PKT
bool "SMD Packet Driver"
depends on MSM_SMD
default y
help
Provides a binary SMD non-muxed packet port interface.
If in doubt, say yes.
config MSM_SDIO_CMUX
bool "SDIO CMUX Driver"
depends on MSM_SDIO_AL
default n
help
Provides a Muxed port interface over SDIO QMI
config MSM_DSPS
bool "Sensors DSPS driver"
depends on (MSM_PIL && (ARCH_MSM8X60 || ARCH_MSM8960))
default n
help
Provides user-space interface to the sensors manager
to turn on/off the Sensors Processor system clocks.
It is the DSPS responsibility to turn on/off the sensors
themself.
The number of clocks and their name may vary between targets.
It also triggers the PIL to load the DSPS firmware.
config MSM_SDIO_CTL
bool "SDIO CTL Driver"
depends on MSM_SDIO_CMUX
default n
help
Provides a binary SDIO control port interface.
config MSM_ONCRPCROUTER
depends on MSM_SMD
default n
bool "MSM ONCRPC router support"
help
Support for the MSM ONCRPC router for communication between
the ARM9 and ARM11
config MSM_IPC_ROUTER
depends on NET
default n
bool "MSM IPC Router support"
help
Support for the MSM IPC Router for communication between
the APPs and the MODEM
config MSM_IPC_ROUTER_SMD_XPRT
depends on MSM_SMD
depends on MSM_IPC_ROUTER
default n
bool "MSM SMD XPRT Layer"
help
SMD Transport Layer for IPC Router
config MSM_IPC_ROUTER_HSIC_XPRT
depends on USB_QCOM_IPC_BRIDGE
depends on MSM_IPC_ROUTER
bool "MSM HSIC XPRT Layer"
help
HSIC Transport Layer that enables off-chip communication of
IPC Router. When the HSIC endpoint becomes available, this layer
registers the transport with IPC Router and enable message
exchange.
config MSM_IPC_ROUTER_SECURITY
depends on MSM_IPC_ROUTER
bool "MSM IPC Router Security support"
help
This feature of IPC Router will enforce security rules
configured by a security script from the user-space. IPC Router
once configured with the security rules will ensure that the
sender of the message to a service belongs to the relevant
Linux group as configured by the security script.
config MSM_QMI_INTERFACE
depends on MSM_IPC_ROUTER
depends on QMI_ENCDEC
default n
bool "MSM QMI Interface Library"
help
Library to send and receive QMI messages over IPC Router.
This library provides interface functions to the kernel drivers
to perform QMI message marshaling and transport them over IPC
Router.
config MSM_TEST_QMI_CLIENT
depends on MSM_QMI_INTERFACE
bool "MSM TEST QMI CLIENT"
help
The sample QMI client provides a test code for QMI usage. The
test_service client driver uses QMI interface library to send
and receive QMI messages over IPC Router. The test code sends
a synchronous QMI request to the test_service and handles the
QMI responses.
config MSM_ONCRPCROUTER_DEBUG
depends on MSM_ONCRPCROUTER
default y
bool "MSM debug ONCRPC router support"
help
Support for debugging the ONCRPC router for communication
between the ARM9 and ARM11
config MSM_RPC_LOOPBACK_XPRT
depends on MSM_ONCRPCROUTER
default n
bool "MSM RPC local routing support"
help
Support for routing RPC messages between APPS clients
and APPS servers. Helps in testing APPS RPC framework.
config MSM_RPCSERVER_TIME_REMOTE
depends on MSM_ONCRPCROUTER && RTC_HCTOSYS
default y
bool "Time remote RPC server"
help
The time remote server receives notification of time bases and
reports these events to registered callback functions.
config MSM_RPCSERVER_WATCHDOG
depends on MSM_ONCRPCROUTER
default y
bool "Watchdog RPC server"
help
The dog_keepalive server handles watchdog events.
config MSM_RPC_WATCHDOG
depends on MSM_ONCRPCROUTER
default n
bool "Watchdog RPC client"
help
The dog_keepalive client module.
config MSM_RPC_PING
depends on MSM_ONCRPCROUTER && DEBUG_FS
default m
bool "MSM rpc ping"
help
Implements MSM rpc ping test module.
config MSM_RPC_PROC_COMM_TEST
depends on DEBUG_FS && MSM_PROC_COMM
default m
bool "MSM rpc proc comm test"
help
Implements MSM rpc proc comm test module.
config MSM_RPC_OEM_RAPI
depends on MSM_ONCRPCROUTER
default m
bool "MSM oem rapi"
help
Implements MSM oem rapi client module.
config MSM_RPCSERVER_HANDSET
depends on MSM_ONCRPCROUTER
default y
bool "Handset events RPC server"
help
Support for receiving handset events like headset detect,
headset switch and clamshell state.
config MSM_RMT_STORAGE_CLIENT
depends on (ARCH_MSM && MSM_ONCRPCROUTER)
default n
bool "Remote Storage RPC client"
help
Provide RPC mechanism for remote processors to access storage
device on apps processor.
config MSM_RMT_STORAGE_CLIENT_STATS
depends on (MSM_RMT_STORAGE_CLIENT && DEBUG_FS)
default n
bool "Remote storage RPC client performance statistics"
help
Collects performance statistics and shows this information
through a debugfs file rmt_storage_stats.
config MSM_SDIO_SMEM
depends on MSM_SDIO_AL
default n
bool "SDIO SMEM for remote storage"
help
Copies data from remote MDM9K memory to local MSM8x60
memory. Used by remote storage client to shadow
MDM9K filesystem.
config MSM_DALRPC
bool "DAL RPC support"
default n
help
Supports RPC calls to DAL devices on remote processor cores.
config MSM_DALRPC_TEST
tristate "DAL RPC test module"
depends on (MSM_DALRPC && DEBUG_FS)
default m
help
Exercises DAL RPC calls to QDSP6.
if CPU_FREQ_MSM
config MSM_CPU_FREQ_SET_MIN_MAX
bool "Set Min/Max CPU frequencies."
default n
help
Allow setting min and max CPU frequencies. Sysfs can be used
to override these values.
config MSM_CPU_FREQ_MAX
int "Max CPU Frequency"
depends on MSM_CPU_FREQ_SET_MIN_MAX
default 384000
config MSM_CPU_FREQ_MIN
int "Min CPU Frequency"
depends on MSM_CPU_FREQ_SET_MIN_MAX
default 245760
endif # CPU_FREQ_MSM
config MSM_AVS_HW
bool "Enable Adaptive Voltage Scaling (AVS)"
default n
help
Enable AVS hardware to fine tune voltage at each frequency. The
AVS hardware blocks associated with each Qualcomm ARMv7 cores can
fine tune the voltages based on the feedback from the ring
oscillators.
config MSM_HW3D
tristate "MSM Hardware 3D Register Driver"
help
Provides access to registers needed by the userspace OpenGL|ES
library.
config MSM_ADSP
depends on (ARCH_MSM7X01A || ARCH_MSM7X25 || ARCH_MSM7X27)
tristate "MSM ADSP driver"
default y
help
Provides access to registers needed by the userspace aDSP library.
config ADSP_RPC_VER
hex
default 0x30002 if (ARCH_MSM7X27 || (ARCH_MSM7X25 && AMSS_7X25_VERSION_2009))
default 0x30001 if (ARCH_MSM7X01A || (ARCH_MSM7X25 && AMSS_7X25_VERSION_2008))
depends on MSM_ADSP
help
Select proper ADSP RPC version
choice
prompt "ADSP RPC version"
default AMSS_7X25_VERSION_2009
config AMSS_7X25_VERSION_2009
bool "2.0.09"
config AMSS_7X25_VERSION_2008
bool "2.0.08"
endchoice
config MSM7KV2_AUDIO
bool "MSM7K v2 audio"
depends on ARCH_MSM7X30
default y
help
Enables QDSP5V2-based audio drivers for audio playbacks and
voice call.
config MSM_ADSP_REPORT_EVENTS
bool "Report modem events from the DSP"
default y
depends on (MSM_ADSP || MSM7KV2_AUDIO)
help
Normally, only messages from the aDSP are reported to userspace.
With this option, we report events from the aDSP as well.
config MSM_QDSP6
tristate "QDSP6 support"
depends on ARCH_QSD8X50
default y
help
Enable support for qdsp6. This provides audio and video functionality.
config MSM8X60_AUDIO
tristate "MSM8X60 audio support"
depends on ARCH_MSM8X60
default y
help
Enable support for qdsp6v2. This provides audio functionality.
config MSM8X60_FTM_AUDIO_DEVICES
bool "MSM8X60 audio factory test mode support"
depends on MSM8X60_AUDIO
help
Enable support audio factory test mode devices. This is used
in a production line environment.
config RTAC
bool "MSM8K real-time audio calibration support"
default y
help
Enable support for rtac. This enables calibration during
audio operation
config MSM7X27A_AUDIO
bool "MSM7X27A audio support"
depends on ARCH_MSM7X27A && MSM_ADSP
default n
help
Enable support for 7x27a. This provides audio functionality.
config MSM_PROC_COMM_REGULATOR
bool
depends on MSM_PROC_COMM && REGULATOR
help
Enable regulator framework support for regulators managed by PMLIB
on the modem, and controlled through proccomm calls.
config MSM_VREG_SWITCH_INVERTED
bool "Reverse vreg switch polarity"
default n
help
Reverses the enable and disable for vreg switch.
config MSM_DMA_TEST
tristate "MSM DMA test module"
default m
help
Intended to be compiled as a module. Provides a device node
and ioctls for testing the MSM dma system.
config WIFI_CONTROL_FUNC
bool "Enable WiFi control function abstraction"
help
Enables Power/Reset/Carddetect function abstraction
config WIFI_MEM_PREALLOC
depends on WIFI_CONTROL_FUNC
bool "Preallocate memory for WiFi buffers"
help
Preallocates memory buffers for WiFi driver
config QSD_AUDIO
bool "QSD audio"
depends on ARCH_MSM_SCORPION && MSM_DALRPC && !MSM_SMP
default y
help
Provides PCM, MP3, and AAC audio playback.
config AUDIO_AAC_PLUS
depends on (MSM_ADSP || QSD_AUDIO || MSM7KV2_AUDIO)
bool "AAC+ Audio"
default y
help
Provides AAC+ decoding
config AUDIO_ENHANCED_AAC_PLUS
depends on AUDIO_AAC_PLUS
bool "Enhanced AAC+ Audio"
default y
help
Provides Enhanced AAC+ decoding
config SURF_FFA_GPIO_KEYPAD
bool "MSM SURF/FFA GPIO keypad"
depends on INPUT_GPIO = "y"
default y
help
Select if the GPIO keypad is attached.
config MSM_SLEEP_TIME_OVERRIDE
bool "Allow overriding suspend/sleep time with PM module parameter"
default y
help
Enable the module parameter sleep_time_override. Specified
in units of seconds, it overwrites the normal sleep time of
suspend. The feature is required for automated power management
testing.
config MSM_MEMORY_LOW_POWER_MODE
bool "Control the low power modes of memory"
default n
help
The application processor controls whether memory should enter
which low power mode.
choice
prompt "Default Memory Low Power Mode during Idle"
depends on MSM_MEMORY_LOW_POWER_MODE
default MSM_MEMORY_LOW_POWER_MODE_IDLE_ACTIVE
help
Selects the default low power mode of the memory during idle
sleep.
config MSM_MEMORY_LOW_POWER_MODE_IDLE_ACTIVE
bool "Memory active"
config MSM_MEMORY_LOW_POWER_MODE_IDLE_RETENTION
bool "Memory in retention"
config MSM_MEMORY_LOW_POWER_MODE_IDLE_DEEP_POWER_DOWN
bool "Memory in deep power down"
endchoice
choice
prompt "Default Memory Low Power Mode during Suspend"
depends on MSM_MEMORY_LOW_POWER_MODE
default MSM_MEMORY_LOW_POWER_MODE_SUSPEND_ACTIVE
help
Selects the default low power mode of the memory during suspend
sleep.
config MSM_MEMORY_LOW_POWER_MODE_SUSPEND_ACTIVE
bool "Memory active"
config MSM_MEMORY_LOW_POWER_MODE_SUSPEND_RETENTION
bool "Memory in retention"
config MSM_MEMORY_LOW_POWER_MODE_SUSPEND_DEEP_POWER_DOWN
bool "Memory in deep power down"
endchoice
choice
prompt "Power management timeout action"
default MSM_PM_TIMEOUT_HALT
help
Selects the Application Processor's action when Power Management
times out waiting for Modem's handshake.
config MSM_PM_TIMEOUT_HALT
bool "Halt the Application Processor"
config MSM_PM_TIMEOUT_RESET_MODEM
bool "Reset the Modem Processor"
config MSM_PM_TIMEOUT_RESET_CHIP
bool "Reset the entire chip"
endchoice
config MSM_IDLE_WAIT_ON_MODEM
int "Wait for Modem to become ready for idle power collapse"
default 0
help
If Modem is not ready to handle Application Processor's request
for idle power collapse, wait the number of microseconds in case
Modem becomes ready soon.
config MSM_RPM_REGULATOR
bool "RPM regulator driver"
depends on MSM_RPM && REGULATOR
help
Compile in support for the RPM regulator driver, used for setting
voltages and other parameters of the various power rails supplied
by some Qualcomm PMICs.
config MSM_RPM_REGULATOR_SMD
bool "SMD RPM regulator driver"
depends on REGULATOR
depends on OF
depends on MSM_RPM_SMD
help
Compile in support for the SMD RPM regulator driver which is used for
setting voltages and other parameters of the various power rails
supplied by some Qualcomm PMICs. The SMD RPM regulator driver should
be used on systems which contain an RPM which communicates with the
application processor over SMD.
config MSM_SPM_REGULATOR
bool "SPM regulator driver"
depends on REGULATOR && SPMI && OF_SPMI
help
Enable support for the SPM regulator driver which is used for
setting voltages of processor supply regulators via the SPM module
found inside of the MSM chips. The SPM regulator driver can be used
on MSM systems where the APSS processor cores are supplied by their
own PMIC regulator.
config MSM_SMCMOD
tristate "Secure Monitor Call (SMC) Module"
default n
depends on (ARCH_FSM9XXX && ION && ION_MSM && MSM_SCM)
help
Enable support for smcmod driver. This driver provides a mechanism
to execute the Secure Monitor Call (SMC) to switch from non-secure
to secure execution in the fsm9xxx targets. This module utilizes Ion
for buffer management.
config MSM_SUBSYSTEM_RESTART
bool "MSM Subsystem Restart"
help
This option enables the MSM subsystem restart framework.
The MSM subsystem restart framework provides support to boot,
shutdown, and restart subsystems with a reference counted API.
It also notifies userspace of transitions between these states via
sysfs.
config MSM_SYSMON_COMM
bool "MSM System Monitor communication support"
depends on MSM_SMD && MSM_SUBSYSTEM_RESTART
help
This option adds support for MSM System Monitor library, which
provides an API that may be used for notifying subsystems within
the SoC about other subsystems' power-up/down state-changes.
config MSM_PIL
bool "Peripheral image loading"
select FW_LOADER
default n
help
Some peripherals need to be loaded into memory before they can be
brought out of reset.
Say yes to support these devices.
config MSM_PIL_MODEM
tristate "Modem (ARM11) Boot Support"
depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
help
Support for booting and shutting down ARM11 Modem processors.
config MSM_PIL_QDSP6V3
tristate "QDSP6v3 (Hexagon) Boot Support"
depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
help
Support for booting and shutting down QDSP6v3 processors (hexagon).
The QDSP6 is a low power DSP used in audio software applications.
config MSM_PIL_LPASS_QDSP6V4
tristate "LPASS QDSP6v4 (Hexagon) Boot Support"
depends on MSM_SUBSYSTEM_RESTART
help
Support for booting and shutting down QDSP6v4 processors (hexagon)
in low power audio subsystems. If you would like to record or
play audio then say Y here.
If unsure, say N.
config MSM_PIL_MODEM_QDSP6V4
tristate "Modem QDSP6v4 (Hexagon) Boot Support"
depends on MSM_SUBSYSTEM_RESTART
help
Support for booting and shutting down QDSP6v4 processors (hexagon)
in modem subsystems. If you would like to make or receive phone
calls then say Y here.
If unsure, say N.
config MSM_PIL_LPASS_QDSP6V5
tristate "LPASS QDSP6v5 (Hexagon) Boot Support"
depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
help
Support for booting and shutting down QDSP6v5 (Hexagon) processors
in low power audio subsystems. This driver also monitors the ADSP
SMSM status bits and the ADSP's watchdog interrupt and restarts the
ADSP if the processor encounters a fatal error.
config MSM_PIL_MSS_QDSP6V5
tristate "MSS QDSP6v5 (Hexagon) Boot Support"
depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
help
Support for booting and shutting down QDSP6v5 (Hexagon) processors
in modem subsystems. If you would like to make or receive phone
calls then say Y here.
If unsure, say N.
config MSM_PIL_RIVA
tristate "RIVA (WCNSS) Boot Support"
depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
help
Support for booting and shutting down the RIVA processor (WCNSS).
Riva is the wireless subsystem processor used in bluetooth, wireless
LAN, and FM software applications.
config MSM_PIL_TZAPPS
tristate "TZApps Boot Support"
depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
help
Support for booting and shutting down TZApps.
TZApps is an image that runs in the secure processor state. It is
used to decrypt data and perform secure operations on the behalf of
the kernel.
config MSM_PIL_DSPS
tristate "DSPS Boot Support"
depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
help
Support for booting and shutting down ARM7 DSPS processors.
DSPS is a sensors offloading processor used for applications such
as rotation detection, temperature, etc.
config MSM_PIL_VIDC
tristate "Video Core Secure Boot Support"
depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
help
Support for authenticating the video core image.
config MSM_PIL_VENUS
tristate "VENUS (Video) Boot Support"
depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
help
Support for booting and shutting down the VENUS processor (Video).
Venus is the Video subsystem processor used for video codecs.
config MSM_PIL_GSS
tristate "GSS (Cortex A5) Boot Support"
depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
help
Support for booting and shutting down Cortex A5 processors which run
GPS subsystem firmware.
config MSM_PIL_PRONTO
tristate "PRONTO (WCNSS) Boot Support"
depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
help
Support for booting and shutting down the PRONTO processor (WCNSS).
PRONTO is the wireless subsystem processor used in bluetooth, wireless
LAN, and FM software applications.
config MSM_SCM
bool "Secure Channel Manager (SCM) support"
default n
config SCORPION_Uni_45nm_BUG
bool "Scorpion Uni 45nm(SC45U): Workaround for ICIMVAU and BPIMVA"
depends on ARCH_MSM7X30 || (ARCH_QSD8X50 && MSM_SOC_REV_A)
default y
help
Invalidating the Instruction Cache by Modified Virtual Address to PoU and
invalidating the Branch Predictor Array by Modified Virtual Address can
create invalid entries in the TLB with the wrong ASID values on Scorpion
Uniprocessor 45nm (SC45U) cores. This option enables the recommended software
workaround for Scorpion Uniprocessor 45nm cores.
This bug is not applicable to any ScorpionMP or Scorpion Uni 65nm(SC65U) cores.
config MSM_BUSPM_DEV
tristate "MSM Bus Performance Monitor Kernel Module"
depends on MSM_BUS_SCALING
default n
help
This kernel module is used to mmap() hardware registers for the
performance monitors, counters, etc. The module can also be used to
allocate physical memory which is used by bus performance hardware to
dump performance data.
config MSM_TZ_LOG
tristate "MSM Trust Zone (TZ) Log Driver"
depends on DEBUG_FS
help
This option enables a driver with a debugfs interface for messages
produced by the Secure code (Trust zone). These messages provide
diagnostic information about TZ operation.
config MSM_RPM_LOG
tristate "MSM Resource Power Manager Log Driver"
depends on DEBUG_FS
depends on MSM_RPM || MSM_RPM_SMD
default n
help
This option enables a driver which can read from a circular buffer
of messages produced by the RPM. These messages provide diagnostic
information about RPM operation. The driver outputs the messages
via a debugfs node.
config MSM_RPM_STATS_LOG
tristate "MSM Resource Power Manager Stat Driver"
depends on DEBUG_FS
depends on MSM_RPM || MSM_RPM_SMD
default n
help
This option enables a driver which reads RPM messages from a shared
memory location. These messages provide statistical information about
the low power modes that RPM enters. The drivers outputs the message
via a debugfs node.
config MSM_RPM_RBCPR_STATS_LOG
tristate "MSM Resource Power Manager RPBCPR Stat Driver"
depends on DEBUG_FS
depends on MSM_RPM
help
This option enables a driver which reads RPM messages from a shared
memory location. These messages provide statistical information about
RBCPR (Rapid Bridge Core Power Reduction) information . The drivers
outputs the message via a debugfs node.
config MSM_DIRECT_SCLK_ACCESS
bool "Direct access to the SCLK timer"
default n
config IOMMU_API
bool
config MSM_GPIOMUX
bool
config MSM_SECURE_IO
bool
config MSM_NATIVE_RESTART
bool
config MSM_MODEM_RESTART
bool
config MSM_PM2
depends on PM
bool
config MSM_PM8X60
depends on PM
bool
config MSM_EVENT_TIMER
bool "Event timer"
help
This option enables a modules that manages a list of event timers that
need to be monitored by the PM. The enables the PM code to monitor
events that require the core to be awake and ready to handle the
event.
config MSM_NOPM
default y if !PM
bool
config MSM_BUS_SCALING
bool "Bus scaling driver"
default n
config MSM_BUS_RPM_MULTI_TIER_ENABLED
bool "RPM Multi-tiering Configuration"
depends on MSM_BUS_SCALING
config MSM_WATCHDOG
bool "MSM Watchdog Support"
depends on ARCH_MSM8X60 || ARCH_MSM8960 || ARCH_MSM9615 || ARCH_FSM9XXX
help
This enables the watchdog as is present on 8x60. Currently we use
core 0's watchdog, and reset the entire SoC if it times out. It does
not run during the bootup process, so it will not catch any early
lockups.
config MSM_WATCHDOG_V2
bool "MSM Watchdog Support"
help
This enables the watchdog module. It causes kernel panic if the
watchdog times out. It allows for detection of cpu hangs and
deadlocks. It does not run during the bootup process, so it will
not catch any early lockups.
config MSM_MEMORY_DUMP
bool "MSM Memory Dump Support"
help
This enables memory dump feature. It allows various client
subsystems to register respective dump regions. At the time
of deadlocks or cpu hangs these dump regions are captured to
give a snapshot of the system at the time of the crash.
config MSM_DLOAD_MODE
bool "Enable download mode on crashes"
default n
help
This makes the SoC enter download mode when it resets
due to a kernel panic. Note that this doesn't by itself
make the kernel reboot on a kernel panic - that must be
enabled via another mechanism.
config MSM_JTAG
bool "Debug and ETM trace support across power collapse"
help
Enables support for debugging (specifically breakpoints) and ETM
processor tracing across power collapse both for JTag and OS hosted
software running on the target. Enabling this will ensure debug
and ETM registers are saved and restored across power collapse.
If unsure, say 'N' here to avoid potential power, performance and
memory penalty.
config MSM_JTAG_MM
bool "Debug and ETM trace support across power collapse using memory mapped access"
help
Enables support for debugging (specifically breakpoints) and ETM
processor tracing across power collapse both for JTag and OS hosted
software running on the target. Enabling this will ensure debug
and ETM registers are saved and restored across power collapse.
Required on targets on which cp14 access to debug and ETM registers is
not permitted and so memory mapped access is necessary.
If unsure, say 'N' here to avoid potential power, performance and
memory penalty.
config MSM_ETM
tristate "Enable MSM ETM and ETB"
depends on ARCH_MSM8X60
select MSM_JTAG
help
Enables embedded trace collection on MSM8660
config MSM_SLEEP_STATS_DEVICE
bool "Enable exporting of MSM sleep device stats to userspace"
config MSM_RUN_QUEUE_STATS
bool "Enable collection and exporting of MSM Run Queue stats to userspace"
default n
help
This option enalbes statistics collection on Run Queue. A daemon
in user mode, called MPDecision will be using this data to decide
on when to switch off/on the other cores.
config MSM_STANDALONE_POWER_COLLAPSE
bool "Enable standalone power collapse"
default n
config MSM_GSBI9_UART
bool "Enable GSBI9 UART device"
default n
help
This enables GSBI9 configured into UART.
config MSM_SHARED_GPIO_FOR_UART2DM
bool "Use shared GPIOs into UART mode"
depends on (ARCH_MSM7X27A && !MMC_MSM_SDC3_8_BIT_SUPPORT && !MMC_MSM_SDC4_SUPPORT)
help
This option configures GPIO muxed with SDC4/MMC3
8-bit mode into UART mode. It is used for serial
console on UART2DM. Say Y if you want to have
serial console on UART2DM.
config MSM_SHOW_RESUME_IRQ
bool "Enable logging of interrupts that could have caused resume"
depends on (ARM_GIC || PMIC8058)
default y if PMIC8058
default n
help
This option logs wake up interrupts that have triggered just before
the resume loop unrolls. Say Y if you want to debug why the system
resumed.
config BT_MSM_PINTEST
tristate "MSM Bluetooth Pin Connectivity Test"
depends on ((ARCH_MSM8X60 || ARCH_MSM7X27A) && DEBUG_FS)
default n
help
Bluetooth MSM Pin Connectivity test module.
This driver provides support for verifying the MSM to BT pin
connectivity.
config MSM_FAKE_BATTERY
depends on POWER_SUPPLY
default n
bool "MSM Fake Battery"
help
Enables MSM fake battery driver.
config MSM_QDSP6_APR
bool "Audio QDSP6 APR support"
depends on MSM_SMD
default n
help
Enable APR IPC protocol support between
application processor and QDSP6. APR is
used by audio driver to configure QDSP6's
ASM, ADM and AFE.
config MSM_QDSP6_APRV2
bool "Audio QDSP6 APRv2 support"
depends on MSM_SMD
default n
help
Enable APRv2 IPC protocol support between
application processor and QDSP6. APR is
used by audio driver to configure QDSP6's
ASM, ADM and AFE.
config MSM_QDSP6_CODECS
bool "Audio Codecs on QDSP6 APR "
depends on MSM_SMD
default n
help
Enable Audio codecs with APR IPC protocol support between
application processor and QDSP6. APR is
used by audio driver to configure QDSP6's
ASM, ADM and AFE.
config MSM_QDSP6V2_CODECS
bool "Audio QDSP6V2 APR support"
depends on MSM_SMD
help
Enable Audio codecs with APR IPC protocol support between
application processor and QDSP6 for B-family. APR is
used by audio driver to configure QDSP6's
ASM, ADM and AFE.
config MSM_AUDIO_QDSP6
bool "QDSP6 HW Audio support"
select SND_SOC_MSM_QDSP6_INTF
default n
help
Enable HW audio support in QDSP6.
QDSP6 can support HW encoder & decoder and audio processing
config MSM_AUDIO_QDSP6V2
bool "QDSP6V2 HW Audio support"
select SND_SOC_MSM_QDSP6V2_INTF
help
Enable HW audio support in QDSP6V2.
QDSP6V2 can support HW encoder & decoder and
audio processing. It will enable support for
AAC, AMRNB, AMRWB, EVRC, MP3, QCELP among
others.
config MSM_ADSP_LOADER
tristate "ADSP loader support"
select SND_SOC_MSM_APRV2_INTF
depends on MSM_AUDIO_QDSP6V2 && m
help
Enable ADSP image loader.
The ADSP loader brings ADSP out of reset
for the platforms that use APRv2.
Say M if you want to enable this module.
config MSM_ULTRASOUND_A
bool "QDSP6 HW Ultrasound support"
help
Enable HW ultrasound support in QDSP6.
QDSP6 can support HW encoder & decoder and
ultrasound processing. It will enable
ultrasound data paths between
HW and services, calculating input events
upon the ultrasound data.
config MSM_ULTRASOUND_B
bool "QDSP6V2 HW Ultrasound support"
help
Enable HW Ultrasound support in QDSP6V2.
QDSP6V2 can support HW encoder & decoder and
ultrasound processing. It will enable
ultrasound data paths between
HW and services, calculating input events
upon the ultrasound data.
config MSM_RPC_VIBRATOR
bool "RPC based MSM Vibrator Support"
depends on MSM_ONCRPCROUTER
help
Enable the vibrator support on MSM over RPC. The vibrator
is connected on the PMIC. Say Y if you want to enable this
feature.
config PM8XXX_RPC_VIBRATOR
bool "RPC based Vibrator on PM8xxx PMICs"
depends on MSM_RPC_VIBRATOR
help
Enable the vibrator support on MSM over RPC. The vibrator
is connected on the PM8XXX PMIC. Say Y if you want to enable
this feature.
config MSM_SPM_V1
bool "Driver support for SPM Version 1"
help
Enables the support for Version 1 of the SPM driver. SPM hardware is
used to manage the processor power during sleep. The driver allows
configuring SPM to allow different power modes.
config MSM_SPM_V2
bool "Driver support for SPM Version 2"
help
Enables the support for Version 2 of the SPM driver. SPM hardware is
used to manage the processor power during sleep. The driver allows
configuring SPM to allow different power modes.
config MSM_L2_SPM
bool "SPM support for L2 cache"
depends on MSM_SPM_V2
help
Enable SPM driver support for L2 cache. Some MSM chipsets allow
control of L2 cache low power mode with a Subsystem Power manager.
Enabling this driver allows configuring L2 SPM for low power modes
on supported chipsets.
config MSM_MULTIMEDIA_USE_ION
bool "Multimedia suport using Ion"
depends on ION_MSM
help
Enable support for multimedia drivers using Ion for buffer management
instead of pmem. Selecting this may also involve userspace
dependencies as well.
config MSM_OCMEM
bool "MSM On-Chip memory driver (OCMEM)"
help
Enable support for On-Chip Memory available on certain MSM chipsets.
OCMEM is a low latency, high performance pool shared by subsystems.
config MSM_OCMEM_LOCAL_POWER_CTRL
bool "OCMEM Local Power Control"
depends on MSM_OCMEM
help
Enable direct power management of the OCMEM core by the
OCMEM driver. By default power management is delegated to
the RPM. Selecting this option causes the OCMEM driver to
directly handle the various macro power transitions.
config MSM_OCMEM_DEBUG
bool "OCMEM Debug Support"
depends on MSM_OCMEM
help
Enable debug options for On-chip Memory (OCMEM) driver.
Various debug options include memory, power and latency.
Choosing one of these options allows debugging of each
individual subsystem separately.
config MSM_OCMEM_NONSECURE
bool "OCMEM Non Secure Mode"
depends on MSM_OCMEM_DEBUG
help
Disable OCMEM interaction with secure processor.
By default OCMEM is secured and accesses for each master
is requested by the OCMEM driver. Selecting this option
causes the OCMEM memory to be in non-secure state unless
its locked down by the secure processor.
config MSM_OCMEM_POWER_DEBUG
bool "OCMEM Power Debug Support"
depends on MSM_OCMEM_DEBUG
help
Enable debug support for OCMEM power management.
This adds support for verifying all power management
related operations of OCMEM. Both local power management
and RPM assisted power management operations are supported.
config MSM_OCMEM_DEBUG_ALWAYS_ON
bool "Keep OCMEM always turned ON"
depends on MSM_OCMEM_DEBUG
help
Always vote for all OCMEM clocks and keep all OCMEM
macros turned ON and never allow them to be turned OFF.
Both local power management and RPM assisted power modes
are supported for individual macro power control operations.
config MSM_OCMEM_POWER_DISABLE
bool "OCMEM Disable Power Control"
depends on MSM_OCMEM
help
Disable all OCMEM power management.
Skip all OCMEM power operations that turn ON or
turn OFF the macros. Both local power management and
RPM assisted power management operations are skipped.
Enable this configuration if OCMEM is being exclusively
used as GMEM or OCIMEM.
config SENSORS_ADSP
bool "Enable Sensors Driver Support for ADSP"
help
Add support for sensors ADSP driver.
This driver is used for exercising different sensors use cases,
such as for lower-power OCMEM use cases, and for time syncing
with ADSP clock.
config MSM_RTB
bool "Register tracing"
help
Add support for logging different events to a small uncached
region. This is designed to aid in debugging reset cases where the
caches may not be flushed before the target resets.
config MSM_RTB_SEPARATE_CPUS
bool "Separate entries for each cpu"
depends on MSM_RTB
depends on SMP
help
Under some circumstances, it may be beneficial to give dedicated space
for each cpu to log accesses. Selecting this option will log each cpu
separately. This will guarantee that the last acesses for each cpu
will be logged but there will be fewer entries per cpu
config MSM_EBI_ERP
bool "External Bus Interface (EBI) error reporting"
help
Say 'Y' here to enable reporting of external bus interface errors to
the kernel log. Information such as the offending address and
transaction type will be logged. This may be useful for debugging
seemingly broken memory accesses.
For production builds, you should probably say 'N' here.
config MSM_CACHE_ERP
bool "Cache / CPU error reporting"
depends on ARCH_MSM_KRAIT
help
Say 'Y' here to enable reporting of cache and TLB errors to the kernel
log. Enabling this feature can be used as a system debugging technique
if cache corruption is suspected. Cache error statistics will also be
reported in /proc/cpu/msm_cache_erp.
For production builds, you should probably say 'N' here.
config MSM_L1_ERR_PANIC
bool "Panic on L1 cache errors"
depends on MSM_CACHE_ERP
help
To cause the kernel to panic whenever an L1 cache error is detected, say
'Y' here. This may be useful as a debugging technique if general system
instability is suspected.
For production builds, you should probably say 'N' here.
config MSM_L1_RECOV_ERR_PANIC
bool "Panic on recoverable L1 cache errors"
depends on MSM_CACHE_ERP && MSM_L1_ERR_PANIC
help
Certain CPU designs may be able to automatically recover from certain
kinds of L1 cache errors, even though the L1 cache itself may not
support error correction. These errors should not result in any kind
of corruption, but their presence is nevertheless an indication of
poor system health. To cause the kernel to panic whenever a
recoverable L1 cache error is detected, say 'Y' here. This may be
useful as a debugging technique if general system instability is
suspected.
For production builds, you should definitely say 'N' here.
config MSM_L1_ERR_LOG
bool "Log CPU ERP events to system memory"
depends on MSM_CACHE_ERP
help
Enable logging CPU ERP events to an area of memory that will be
preserved across a system reset. This may be useful for detecting and
troubleshooting ERP-related system crashes in the field.
For production builds, you may want to say 'Y' here.
config MSM_L2_ERP_PRINT_ACCESS_ERRORS
bool "Report L2 master port slave/decode errors in kernel log"
depends on MSM_CACHE_ERP
help
Master port errors can occur when a memory request is not properly
handled by the destination slave. This can occur if the destination
register does not exist or is inaccessible due to security
restrictions or (in some cases) clock configuration. Enabling this
option will cause a backtrace to be printed to the kernel log whenever
such an error is encountered. Note that the error is reported as an
interrupt rather than as an exception, meaning that the backtrace may
have some skid. This option may help with debugging, though production
builds should probably say 'N' here.
config MSM_L2_ERP_PORT_PANIC
bool "Panic on L2 master port errors"
depends on MSM_CACHE_ERP && MSM_L2_ERP_PRINT_ACCESS_ERRORS
help
Master port errors can occur when a memory request is not properly
handled by the destination slave. Enable this option to catch drivers
which attempt to access bad areas of the address space, or access
hardware registers in an improper state (such as certain clocks not
being on). This option may help with debugging, though production
builds should probably say 'N' here.
config MSM_L2_ERP_1BIT_PANIC
bool "Panic on recoverable L2 soft errors"
depends on MSM_CACHE_ERP
help
Enable this option to cause a kernel panic whenever the L2 cache
encounters a single-bit (correctable) soft error. This option should
only be enabled when doing low-level debugging where cache corruption
is suspected.
For production builds, you should definitely say 'N' here.
config MSM_L2_ERP_2BIT_PANIC
bool "Panic on unrecoverable L2 soft errors"
depends on MSM_CACHE_ERP
help
Enable this option to cause a kernel panic whenever the L2 cache
encounters a double-bit (non-correctable) soft error. Debug builds
will likely benefit from having this option enabled to catch cache
problems as soon as possible.
For production builds, it may be acceptable to say 'N' here, since
an uncorrectable error might not necessarily cause further problems.
config MSM_DCVS
bool "Use MSM DCVS for CPU/GPU Frequency control"
depends on MSM_SCM
help
Enable support for MSM DCVS to control all CPU and GPU core frequencies.
The DCVS manager allows idle driver to feed the idle information to the
algorithm and the algorithm returns a frequency for the core which is
passed to the frequency change driver.
config MSM_CPR
tristate "Use MSM CPR in S/W mode"
help
Enable CPR (core power reduction) in S/W mode, where the processor
get's the notification from CPR block and programs the PMIC.
config MSM_VP_REGULATOR
tristate "Use MSM PMIC8029 C2 regulator"
depends on ARCH_MSM8625
help
Enable MSM PMIC8029 C2 regulator support using APC_PLEVEL access
for MSMs like 8625.
config HAVE_ARCH_HAS_CURRENT_TIMER
bool
config MSM_CACHE_DUMP
bool "Cache dumping support"
help
Add infrastructure to dump the L1 and L2 caches to an allocated buffer.
This allows for analysis of the caches in case cache corruption is
suspected.
config MSM_CACHE_DUMP_ON_PANIC
bool "Dump caches on panic"
depends on MSM_CACHE_DUMP
help
By default, the caches are flushed on panic. This means that trying to
look at them in a RAM dump will give useless data. Select this if you
want to dump the L1 and L2 caches on panic before any flush occurs.
If unsure, say N
config MSM_HSIC_SYSMON
tristate "MSM HSIC system monitor driver"
depends on USB
help
Add support for bridging with the system monitor interface of MDM
over HSIC. This driver allows the local system monitor to
communicate with the remote system monitor interface.
config MSM_HSIC_SYSMON_TEST
tristate "MSM HSIC system monitor bridge test"
depends on USB && MSM_HSIC_SYSMON && DEBUG_FS
help
Enable the test hook for the Qualcomm system monitor HSIC driver.
This will create a debugfs file entry named "hsic_sysmon_test" which
can be read and written to send character data to the sysmon port of
the modem over USB.
config MSM_RPC_PMIC
tristate "MSM RPC PMIC driver"
depends on MSM_ONCRPCROUTER
help
This driver supports the PMIC functionality over RPC for those MSM's
which do not have a direct access to PMIC. It supports ability to
configure MPP, GPIO and all the other supported peripherals of the
PMIC.
config MSM_RPC_USB
tristate "MSM RPC USB driver"
depends on MSM_ONCRPCROUTER
help
This driver supports the USB configuration support over the RPC
interface. It support the HS USB module connected to the MSM
and FS USB which is connected over the PMIC. This support is
required for MSMs on which the APPS does not have a direct access
to the PMIC.
config MSM_RPC_PMAPP
tristate "MSM RPC PMIC APP driver"
depends on MSM_ONCRPCROUTER
help
This driver supports the configuration of various PMIC APP modules
such as display backlight, vreg pin-ctrl, smps clock over the RPC
interface. This support is required for MSMs on which the APPS
does not have a direct access to the PMIC.
config MSM_ENABLE_WDOG_DEBUG_CONTROL
bool "Enable control of watchdog debug and boot partition select"
help
Enables support for controlling watchdog debug and boot partition
select. This is currently used to bypass debug image for PS_HOLD reset
by disabling watchdog debug and boot partition select. This allows
for a clean MSM reset for reboot scenarios.
config MSM_FIQ
bool "Enable FIQ for debugging"
depends on ARCH_MSM8625
select FIQ
select GIC_SECURE
help
Enable any line to be used as an FIQ. This will help debugging
if apps is not responding and holding lock with irqs disabled.
Modem will then generate an raise a FIQ on this line before sending
SMSM reset.
config MSM_USE_USER_ACCESSIBLE_TIMERS
bool "Enables mapping an MSM timer counter page to user space."
depends on ARM_USE_USER_ACCESSIBLE_TIMERS
help
Enables MSM-specific user accessible timers via a shared
memory page containing the cycle counter.
config USE_DEV_CTRL_VOLUME
bool "Use Device Control Volume"
help
Use Device Control Volume as opposed to ALSA volume control.
config MSM_CPU_PWRCTL
bool "Ensures that krait droop detectors are always off"
help
Droop detector mechanism can adversely affect krait plls during
stand alone power collapse operation. Selecting this option
ensures that they are always off.
config MSM_UARTDM_Core_v14
bool "Use MSM BLSP based HSUART Core v1.4"
depends on SERIAL_MSM_HS
help
Select if BLSP based UART Core v.14 or higher is present.
config MSM_BOOT_STATS
bool "Use MSM boot stats reporting"
help
Use this to report msm boot stats such as bootloader throughput,
display init, total boot time.
This figures are reported in mpm sleep clock cycles and have a
resolution of 31 bits as 1 bit is used as an overflow check.
config MSM_XPU_ERR_FATAL
bool "Configure XPU violations as fatal errors"
help
Select if XPU violations have to be configured as fatal errors.
config MSM_CPR_REGULATOR
bool "RBCPR regulator driver for APC"
depends on REGULATOR
depends on OF
help
Compile in RBCPR (RapidBridge Core Power Reduction) driver to support
corner vote for APC power rail. The driver takes PTE process voltage
suggestions in efuse as initial settings. It converts corner vote
to voltage value before writing to a voltage regulator API, such as
that provided by spm-regulator driver.
config WALL_CLK
tristate "Wall Clock hardware block simulation"
depends on ARCH_APQ8064
help
This driver simulates the wall-clock hardware block on fsm8064_ep
femto emulation platform. This block will be used to provide
clock information to the LTE Layer 2 module running on the hexagon
processor.
config WALL_CLK_SYSFS
tristate "Wall Clock SysFS Support"
depends on SYSFS && WALL_CLK
help
Support the wallclk directory in sysfs filesystem to enable the
wall clock simulation and read the current SFN.
config TPLINK_PMIC_EXT
bool "Some interfaces for User Layer Support"
default n
config TPLINK_PRODUCT_TR961_5200L_V1
bool "Specify product type tr961-5200l-v1"
default n
config TPLINK_PRODUCT_TR961_2500L_MOBILE_UNICOM_V1
bool "Specify product type tr961-2500l-mobile-unicom-v1"
default n
config TPLINK_PRODUCT_M7350_UN_V1
bool "Specify product type m7350-un-v1"
default n
config TPLINK_PRODUCT_M7350_UN_V2
bool "Specify product type m7350-un-v2"
default n
config TPLINK_PRODUCT_M7300_UN_V1
bool "Specify product type m7300-un-v1"
default n
config TPLINK_FEATURE_LED
bool "feature led"
default n
config TPLINK_PRODUCT_LTE_MODULE_V1
bool "Specify product type lte-module-v1"
default n
endif