106 lines
4.5 KiB
Plaintext
106 lines
4.5 KiB
Plaintext
MSM thermal driver (MSM_THERMAL)
|
|
|
|
MSM_THERMAL is a kernel platform driver which regulates thermal conditions
|
|
on the device during kernel boot. The goal of MSM_THERMAL is to prevent the
|
|
temperature of the system from exceeding a thermal limit at which it cannot
|
|
operate. Examples are CPU junction thermal limit, or POP memory thermal limit.
|
|
The MSM_THERMAL driver polls the TSENS sensor hardware during boot, and
|
|
reduces the maximum CPU frequency allowed in steps, to limit power/thermal
|
|
output when a threshold temperature is crossed. It restores the maximum CPU
|
|
frequency allowed in the same stepwise fashion when the threshold temperature
|
|
(with hysteresis gap) is cleared.
|
|
|
|
The devicetree representation of the MSM_THERMAL block should be:
|
|
|
|
Required properties
|
|
|
|
- compatible: "qcom,msm-thermal"
|
|
- qcom,sensor-id: The id of the TSENS sensor polled for temperature.
|
|
Typically the sensor closest to CPU0.
|
|
- qcom,poll-ms: Sampling interval to read sensor, in ms.
|
|
- qcom,limit-temp: Threshold temperature to start stepping CPU down, in degC.
|
|
- qcom,temp-hysteresis: Degrees C below threshold temperature to step CPU up.
|
|
- qcom,freq-step: Number of frequency steps to take on each CPU mitigation.
|
|
|
|
Optional properties
|
|
|
|
- qcom,freq-control-mask: The cpu mask that will be used to determine if a
|
|
core can be used for freq control.
|
|
- qcom,core-limit-temp: Threshold temperature to start shutting down cores
|
|
in degC
|
|
- qcom,core-temp-hysterisis: Degrees C below which the cores will be brought
|
|
online in sequence.
|
|
- qcom,core-control-mask: The cpu mask that will be used to determine if a
|
|
core can be controlled or not. A mask of 0 indicates
|
|
the feature is disabled.
|
|
- qcom,vdd-restriction-temp: When temperature is below this threshold, will
|
|
enable vdd restriction which will set higher voltage on
|
|
key voltage rails, in degC.
|
|
- qcom,vdd-restriction-temp-hysteresis: When temperature is above this threshold
|
|
will disable vdd restriction on key rails, in degC.
|
|
- qcom,pmic-sw-mode-temp: Threshold temperature to disable auto mode on the
|
|
rail, in degC. If this property exists,
|
|
qcom,pmic-sw-mode-temp-hysteresis and
|
|
qcom,pmic-sw-mode-regs need to exist, otherwise return error.
|
|
- qcom,pmic-sw-mode-temp-hysteresis: Degree below threshold temperature to
|
|
enable auto mode on the rail, in degC. If this property exists,
|
|
qcom,pmic-sw-mode-temp and qcom,pmic-sw-mode-regs need to
|
|
exist, otherwise return error.
|
|
- qcom,pmic-sw-mode-regs: Array of the regulator names that will want to
|
|
disable/enable automode based on the threshold. If this
|
|
property exists, qcom,pmic-sw-mode-temp and
|
|
qcom,pmic-sw-mode-temp-hysteresis need to exist, otherwise
|
|
return error. Also, if this property is defined, will have to
|
|
define <consumer_supply_name>-supply = <&phandle_of_regulator>
|
|
- <consumer_supply_name>-supply = <&phandle_of_regulator>: consumer_supply_name
|
|
is the name that's defined in thermal driver.
|
|
phandle_of_regulator is defined by reuglator device tree.
|
|
|
|
Optional child nodes
|
|
- qcom,<vdd restriction child node name>: Define the name of the child node.
|
|
If this property exisits, qcom,vdd-rstr-reg, qcom,levels
|
|
need to exist. qcom,min-level is optional if qcom,freq-req
|
|
exists, otherwise it's required.
|
|
- qcom,vdd-rstr-reg: Name of the rail
|
|
- qcom,levels: Array of the level values. Unit is corner voltage for voltage request
|
|
or kHz for frequency request.
|
|
- qcom,min-level: Request this level as minimum level when disabling voltage
|
|
restriction. Unit is corner voltage for voltage request.
|
|
This will not be required if qcom,freq-req exists.
|
|
- qcom,freq-req: Flag to determine if we should restrict frequency on this rail
|
|
instead of voltage.
|
|
|
|
Example:
|
|
|
|
qcom,msm-thermal {
|
|
compatible = "qcom,msm-thermal";
|
|
qcom,sensor-id = <0>;
|
|
qcom,poll-ms = <250>;
|
|
qcom,limit-temp = <60>;
|
|
qcom,temp-hysteresis = <10>;
|
|
qcom,freq-step = <2>;
|
|
qcom,freq-control-mask = <0xf>
|
|
qcom,core-limit-temp = <90>;
|
|
qcom,core-temp-hysterisis = <10>;
|
|
qcom,core-control-mask = <7>;
|
|
qcom,pmic-sw-mode-temp = <90>;
|
|
qcom,pmic-sw-mode-temp-hysteresis = <80>;
|
|
qcom,pmic-sw-mode-regs = "vdd_dig";
|
|
qcom,vdd-restriction-temp = <5>;
|
|
qcom,vdd-restriction-temp-hysteresis = <10>;
|
|
vdd_dig-supply=<&pm8841_s2_floor_corner>
|
|
|
|
qcom,vdd-dig-rstr{
|
|
qcom,vdd-rstr-reg = "vdd_dig";
|
|
qcom,levels = <5 7 7>; /* Nominal, Super Turbo, Super Turbo */
|
|
qcom,min-level = <1>; /* No Request */
|
|
};
|
|
|
|
qcom,vdd-apps-rstr{
|
|
qcom,vdd-rstr-reg = "vdd_apps";
|
|
qcom,levels = <1881600 1958400 2265600>;
|
|
qcom,freq-req;
|
|
};
|
|
};
|
|
|