5146 lines
146 KiB
C
5146 lines
146 KiB
C
/*
|
|
* Copyright (c) 2010-2011 Atheros Communications Inc.
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
#include <asm/unaligned.h>
|
|
#include "hw.h"
|
|
#include "ar9003_phy.h"
|
|
#include "ar9003_eeprom.h"
|
|
|
|
#define COMP_HDR_LEN 4
|
|
#define COMP_CKSUM_LEN 2
|
|
|
|
#define LE16(x) __constant_cpu_to_le16(x)
|
|
#define LE32(x) __constant_cpu_to_le32(x)
|
|
|
|
/* Local defines to distinguish between extension and control CTL's */
|
|
#define EXT_ADDITIVE (0x8000)
|
|
#define CTL_11A_EXT (CTL_11A | EXT_ADDITIVE)
|
|
#define CTL_11G_EXT (CTL_11G | EXT_ADDITIVE)
|
|
#define CTL_11B_EXT (CTL_11B | EXT_ADDITIVE)
|
|
|
|
#define SUB_NUM_CTL_MODES_AT_5G_40 2 /* excluding HT40, EXT-OFDM */
|
|
#define SUB_NUM_CTL_MODES_AT_2G_40 3 /* excluding HT40, EXT-OFDM, EXT-CCK */
|
|
|
|
#define CTL(_tpower, _flag) ((_tpower) | ((_flag) << 6))
|
|
|
|
#define EEPROM_DATA_LEN_9485 1088
|
|
|
|
static int ar9003_hw_power_interpolate(int32_t x,
|
|
int32_t *px, int32_t *py, u_int16_t np);
|
|
|
|
|
|
static const struct ar9300_eeprom ar9300_default = {
|
|
.eepromVersion = 2,
|
|
.templateVersion = 2,
|
|
.macAddr = {0, 2, 3, 4, 5, 6},
|
|
.custData = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
|
|
.baseEepHeader = {
|
|
.regDmn = { LE16(0), LE16(0x1f) },
|
|
.txrxMask = 0x77, /* 4 bits tx and 4 bits rx */
|
|
.opCapFlags = {
|
|
.opFlags = AR5416_OPFLAGS_11G | AR5416_OPFLAGS_11A,
|
|
.eepMisc = 0,
|
|
},
|
|
.rfSilent = 0,
|
|
.blueToothOptions = 0,
|
|
.deviceCap = 0,
|
|
.deviceType = 5, /* takes lower byte in eeprom location */
|
|
.pwrTableOffset = AR9300_PWR_TABLE_OFFSET,
|
|
.params_for_tuning_caps = {0, 0},
|
|
.featureEnable = 0x0c,
|
|
/*
|
|
* bit0 - enable tx temp comp - disabled
|
|
* bit1 - enable tx volt comp - disabled
|
|
* bit2 - enable fastClock - enabled
|
|
* bit3 - enable doubling - enabled
|
|
* bit4 - enable internal regulator - disabled
|
|
* bit5 - enable pa predistortion - disabled
|
|
*/
|
|
.miscConfiguration = 0, /* bit0 - turn down drivestrength */
|
|
.eepromWriteEnableGpio = 3,
|
|
.wlanDisableGpio = 0,
|
|
.wlanLedGpio = 8,
|
|
.rxBandSelectGpio = 0xff,
|
|
.txrxgain = 0,
|
|
.swreg = 0,
|
|
},
|
|
.modalHeader2G = {
|
|
/* ar9300_modal_eep_header 2g */
|
|
/* 4 idle,t1,t2,b(4 bits per setting) */
|
|
.antCtrlCommon = LE32(0x110),
|
|
/* 4 ra1l1, ra2l1, ra1l2, ra2l2, ra12 */
|
|
.antCtrlCommon2 = LE32(0x22222),
|
|
|
|
/*
|
|
* antCtrlChain[AR9300_MAX_CHAINS]; 6 idle, t, r,
|
|
* rx1, rx12, b (2 bits each)
|
|
*/
|
|
.antCtrlChain = { LE16(0x150), LE16(0x150), LE16(0x150) },
|
|
|
|
/*
|
|
* xatten1DB[AR9300_MAX_CHAINS]; 3 xatten1_db
|
|
* for ar9280 (0xa20c/b20c 5:0)
|
|
*/
|
|
.xatten1DB = {0, 0, 0},
|
|
|
|
/*
|
|
* xatten1Margin[AR9300_MAX_CHAINS]; 3 xatten1_margin
|
|
* for ar9280 (0xa20c/b20c 16:12
|
|
*/
|
|
.xatten1Margin = {0, 0, 0},
|
|
.tempSlope = 36,
|
|
.voltSlope = 0,
|
|
|
|
/*
|
|
* spurChans[OSPREY_EEPROM_MODAL_SPURS]; spur
|
|
* channels in usual fbin coding format
|
|
*/
|
|
.spurChans = {0, 0, 0, 0, 0},
|
|
|
|
/*
|
|
* noiseFloorThreshCh[AR9300_MAX_CHAINS]; 3 Check
|
|
* if the register is per chain
|
|
*/
|
|
.noiseFloorThreshCh = {-1, 0, 0},
|
|
.reserved = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
|
|
.quick_drop = 0,
|
|
.xpaBiasLvl = 0,
|
|
.txFrameToDataStart = 0x0e,
|
|
.txFrameToPaOn = 0x0e,
|
|
.txClip = 3, /* 4 bits tx_clip, 4 bits dac_scale_cck */
|
|
.antennaGain = 0,
|
|
.switchSettling = 0x2c,
|
|
.adcDesiredSize = -30,
|
|
.txEndToXpaOff = 0,
|
|
.txEndToRxOn = 0x2,
|
|
.txFrameToXpaOn = 0xe,
|
|
.thresh62 = 28,
|
|
.papdRateMaskHt20 = LE32(0x0cf0e0e0),
|
|
.papdRateMaskHt40 = LE32(0x6cf0e0e0),
|
|
.futureModal = {
|
|
0, 0, 0, 0, 0, 0, 0, 0,
|
|
},
|
|
},
|
|
.base_ext1 = {
|
|
.ant_div_control = 0,
|
|
.future = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
|
|
},
|
|
.calFreqPier2G = {
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2437, 1),
|
|
FREQ2FBIN(2472, 1),
|
|
},
|
|
/* ar9300_cal_data_per_freq_op_loop 2g */
|
|
.calPierData2G = {
|
|
{ {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} },
|
|
{ {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} },
|
|
{ {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} },
|
|
},
|
|
.calTarget_freqbin_Cck = {
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2484, 1),
|
|
},
|
|
.calTarget_freqbin_2G = {
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2437, 1),
|
|
FREQ2FBIN(2472, 1)
|
|
},
|
|
.calTarget_freqbin_2GHT20 = {
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2437, 1),
|
|
FREQ2FBIN(2472, 1)
|
|
},
|
|
.calTarget_freqbin_2GHT40 = {
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2437, 1),
|
|
FREQ2FBIN(2472, 1)
|
|
},
|
|
.calTargetPowerCck = {
|
|
/* 1L-5L,5S,11L,11S */
|
|
{ {36, 36, 36, 36} },
|
|
{ {36, 36, 36, 36} },
|
|
},
|
|
.calTargetPower2G = {
|
|
/* 6-24,36,48,54 */
|
|
{ {32, 32, 28, 24} },
|
|
{ {32, 32, 28, 24} },
|
|
{ {32, 32, 28, 24} },
|
|
},
|
|
.calTargetPower2GHT20 = {
|
|
{ {32, 32, 32, 32, 28, 20, 32, 32, 28, 20, 32, 32, 28, 20} },
|
|
{ {32, 32, 32, 32, 28, 20, 32, 32, 28, 20, 32, 32, 28, 20} },
|
|
{ {32, 32, 32, 32, 28, 20, 32, 32, 28, 20, 32, 32, 28, 20} },
|
|
},
|
|
.calTargetPower2GHT40 = {
|
|
{ {32, 32, 32, 32, 28, 20, 32, 32, 28, 20, 32, 32, 28, 20} },
|
|
{ {32, 32, 32, 32, 28, 20, 32, 32, 28, 20, 32, 32, 28, 20} },
|
|
{ {32, 32, 32, 32, 28, 20, 32, 32, 28, 20, 32, 32, 28, 20} },
|
|
},
|
|
.ctlIndex_2G = {
|
|
0x11, 0x12, 0x15, 0x17, 0x41, 0x42,
|
|
0x45, 0x47, 0x31, 0x32, 0x35, 0x37,
|
|
},
|
|
.ctl_freqbin_2G = {
|
|
{
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2417, 1),
|
|
FREQ2FBIN(2457, 1),
|
|
FREQ2FBIN(2462, 1)
|
|
},
|
|
{
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2417, 1),
|
|
FREQ2FBIN(2462, 1),
|
|
0xFF,
|
|
},
|
|
|
|
{
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2417, 1),
|
|
FREQ2FBIN(2462, 1),
|
|
0xFF,
|
|
},
|
|
{
|
|
FREQ2FBIN(2422, 1),
|
|
FREQ2FBIN(2427, 1),
|
|
FREQ2FBIN(2447, 1),
|
|
FREQ2FBIN(2452, 1)
|
|
},
|
|
|
|
{
|
|
/* Data[4].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
|
|
/* Data[4].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
|
|
/* Data[4].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
|
|
/* Data[4].ctlEdges[3].bChannel */ FREQ2FBIN(2484, 1),
|
|
},
|
|
|
|
{
|
|
/* Data[5].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
|
|
/* Data[5].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
|
|
/* Data[5].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
|
|
0,
|
|
},
|
|
|
|
{
|
|
/* Data[6].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
|
|
/* Data[6].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
|
|
FREQ2FBIN(2472, 1),
|
|
0,
|
|
},
|
|
|
|
{
|
|
/* Data[7].ctlEdges[0].bChannel */ FREQ2FBIN(2422, 1),
|
|
/* Data[7].ctlEdges[1].bChannel */ FREQ2FBIN(2427, 1),
|
|
/* Data[7].ctlEdges[2].bChannel */ FREQ2FBIN(2447, 1),
|
|
/* Data[7].ctlEdges[3].bChannel */ FREQ2FBIN(2462, 1),
|
|
},
|
|
|
|
{
|
|
/* Data[8].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
|
|
/* Data[8].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
|
|
/* Data[8].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
|
|
},
|
|
|
|
{
|
|
/* Data[9].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
|
|
/* Data[9].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
|
|
/* Data[9].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
|
|
0
|
|
},
|
|
|
|
{
|
|
/* Data[10].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
|
|
/* Data[10].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
|
|
/* Data[10].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
|
|
0
|
|
},
|
|
|
|
{
|
|
/* Data[11].ctlEdges[0].bChannel */ FREQ2FBIN(2422, 1),
|
|
/* Data[11].ctlEdges[1].bChannel */ FREQ2FBIN(2427, 1),
|
|
/* Data[11].ctlEdges[2].bChannel */ FREQ2FBIN(2447, 1),
|
|
/* Data[11].ctlEdges[3].bChannel */ FREQ2FBIN(2462, 1),
|
|
}
|
|
},
|
|
.ctlPowerData_2G = {
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
|
|
{ { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } },
|
|
|
|
{ { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0) } },
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
|
|
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0) } },
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
|
|
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } },
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } },
|
|
},
|
|
.modalHeader5G = {
|
|
/* 4 idle,t1,t2,b (4 bits per setting) */
|
|
.antCtrlCommon = LE32(0x110),
|
|
/* 4 ra1l1, ra2l1, ra1l2,ra2l2,ra12 */
|
|
.antCtrlCommon2 = LE32(0x22222),
|
|
/* antCtrlChain 6 idle, t,r,rx1,rx12,b (2 bits each) */
|
|
.antCtrlChain = {
|
|
LE16(0x000), LE16(0x000), LE16(0x000),
|
|
},
|
|
/* xatten1DB 3 xatten1_db for AR9280 (0xa20c/b20c 5:0) */
|
|
.xatten1DB = {0, 0, 0},
|
|
|
|
/*
|
|
* xatten1Margin[AR9300_MAX_CHAINS]; 3 xatten1_margin
|
|
* for merlin (0xa20c/b20c 16:12
|
|
*/
|
|
.xatten1Margin = {0, 0, 0},
|
|
.tempSlope = 68,
|
|
.voltSlope = 0,
|
|
/* spurChans spur channels in usual fbin coding format */
|
|
.spurChans = {0, 0, 0, 0, 0},
|
|
/* noiseFloorThreshCh Check if the register is per chain */
|
|
.noiseFloorThreshCh = {-1, 0, 0},
|
|
.reserved = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
|
|
.quick_drop = 0,
|
|
.xpaBiasLvl = 0,
|
|
.txFrameToDataStart = 0x0e,
|
|
.txFrameToPaOn = 0x0e,
|
|
.txClip = 3, /* 4 bits tx_clip, 4 bits dac_scale_cck */
|
|
.antennaGain = 0,
|
|
.switchSettling = 0x2d,
|
|
.adcDesiredSize = -30,
|
|
.txEndToXpaOff = 0,
|
|
.txEndToRxOn = 0x2,
|
|
.txFrameToXpaOn = 0xe,
|
|
.thresh62 = 28,
|
|
.papdRateMaskHt20 = LE32(0x0c80c080),
|
|
.papdRateMaskHt40 = LE32(0x0080c080),
|
|
.futureModal = {
|
|
0, 0, 0, 0, 0, 0, 0, 0,
|
|
},
|
|
},
|
|
.base_ext2 = {
|
|
.tempSlopeLow = 0,
|
|
.tempSlopeHigh = 0,
|
|
.xatten1DBLow = {0, 0, 0},
|
|
.xatten1MarginLow = {0, 0, 0},
|
|
.xatten1DBHigh = {0, 0, 0},
|
|
.xatten1MarginHigh = {0, 0, 0}
|
|
},
|
|
.calFreqPier5G = {
|
|
FREQ2FBIN(5180, 0),
|
|
FREQ2FBIN(5220, 0),
|
|
FREQ2FBIN(5320, 0),
|
|
FREQ2FBIN(5400, 0),
|
|
FREQ2FBIN(5500, 0),
|
|
FREQ2FBIN(5600, 0),
|
|
FREQ2FBIN(5725, 0),
|
|
FREQ2FBIN(5825, 0)
|
|
},
|
|
.calPierData5G = {
|
|
{
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
},
|
|
{
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
},
|
|
{
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
},
|
|
|
|
},
|
|
.calTarget_freqbin_5G = {
|
|
FREQ2FBIN(5180, 0),
|
|
FREQ2FBIN(5220, 0),
|
|
FREQ2FBIN(5320, 0),
|
|
FREQ2FBIN(5400, 0),
|
|
FREQ2FBIN(5500, 0),
|
|
FREQ2FBIN(5600, 0),
|
|
FREQ2FBIN(5725, 0),
|
|
FREQ2FBIN(5825, 0)
|
|
},
|
|
.calTarget_freqbin_5GHT20 = {
|
|
FREQ2FBIN(5180, 0),
|
|
FREQ2FBIN(5240, 0),
|
|
FREQ2FBIN(5320, 0),
|
|
FREQ2FBIN(5500, 0),
|
|
FREQ2FBIN(5700, 0),
|
|
FREQ2FBIN(5745, 0),
|
|
FREQ2FBIN(5725, 0),
|
|
FREQ2FBIN(5825, 0)
|
|
},
|
|
.calTarget_freqbin_5GHT40 = {
|
|
FREQ2FBIN(5180, 0),
|
|
FREQ2FBIN(5240, 0),
|
|
FREQ2FBIN(5320, 0),
|
|
FREQ2FBIN(5500, 0),
|
|
FREQ2FBIN(5700, 0),
|
|
FREQ2FBIN(5745, 0),
|
|
FREQ2FBIN(5725, 0),
|
|
FREQ2FBIN(5825, 0)
|
|
},
|
|
.calTargetPower5G = {
|
|
/* 6-24,36,48,54 */
|
|
{ {20, 20, 20, 10} },
|
|
{ {20, 20, 20, 10} },
|
|
{ {20, 20, 20, 10} },
|
|
{ {20, 20, 20, 10} },
|
|
{ {20, 20, 20, 10} },
|
|
{ {20, 20, 20, 10} },
|
|
{ {20, 20, 20, 10} },
|
|
{ {20, 20, 20, 10} },
|
|
},
|
|
.calTargetPower5GHT20 = {
|
|
/*
|
|
* 0_8_16,1-3_9-11_17-19,
|
|
* 4,5,6,7,12,13,14,15,20,21,22,23
|
|
*/
|
|
{ {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} },
|
|
{ {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} },
|
|
{ {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} },
|
|
{ {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} },
|
|
{ {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} },
|
|
{ {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} },
|
|
{ {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} },
|
|
{ {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} },
|
|
},
|
|
.calTargetPower5GHT40 = {
|
|
/*
|
|
* 0_8_16,1-3_9-11_17-19,
|
|
* 4,5,6,7,12,13,14,15,20,21,22,23
|
|
*/
|
|
{ {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} },
|
|
{ {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} },
|
|
{ {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} },
|
|
{ {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} },
|
|
{ {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} },
|
|
{ {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} },
|
|
{ {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} },
|
|
{ {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} },
|
|
},
|
|
.ctlIndex_5G = {
|
|
0x10, 0x16, 0x18, 0x40, 0x46,
|
|
0x48, 0x30, 0x36, 0x38
|
|
},
|
|
.ctl_freqbin_5G = {
|
|
{
|
|
/* Data[0].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
|
|
/* Data[0].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0),
|
|
/* Data[0].ctlEdges[2].bChannel */ FREQ2FBIN(5280, 0),
|
|
/* Data[0].ctlEdges[3].bChannel */ FREQ2FBIN(5500, 0),
|
|
/* Data[0].ctlEdges[4].bChannel */ FREQ2FBIN(5600, 0),
|
|
/* Data[0].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0),
|
|
/* Data[0].ctlEdges[6].bChannel */ FREQ2FBIN(5745, 0),
|
|
/* Data[0].ctlEdges[7].bChannel */ FREQ2FBIN(5825, 0)
|
|
},
|
|
{
|
|
/* Data[1].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
|
|
/* Data[1].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0),
|
|
/* Data[1].ctlEdges[2].bChannel */ FREQ2FBIN(5280, 0),
|
|
/* Data[1].ctlEdges[3].bChannel */ FREQ2FBIN(5500, 0),
|
|
/* Data[1].ctlEdges[4].bChannel */ FREQ2FBIN(5520, 0),
|
|
/* Data[1].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0),
|
|
/* Data[1].ctlEdges[6].bChannel */ FREQ2FBIN(5745, 0),
|
|
/* Data[1].ctlEdges[7].bChannel */ FREQ2FBIN(5825, 0)
|
|
},
|
|
|
|
{
|
|
/* Data[2].ctlEdges[0].bChannel */ FREQ2FBIN(5190, 0),
|
|
/* Data[2].ctlEdges[1].bChannel */ FREQ2FBIN(5230, 0),
|
|
/* Data[2].ctlEdges[2].bChannel */ FREQ2FBIN(5270, 0),
|
|
/* Data[2].ctlEdges[3].bChannel */ FREQ2FBIN(5310, 0),
|
|
/* Data[2].ctlEdges[4].bChannel */ FREQ2FBIN(5510, 0),
|
|
/* Data[2].ctlEdges[5].bChannel */ FREQ2FBIN(5550, 0),
|
|
/* Data[2].ctlEdges[6].bChannel */ FREQ2FBIN(5670, 0),
|
|
/* Data[2].ctlEdges[7].bChannel */ FREQ2FBIN(5755, 0)
|
|
},
|
|
|
|
{
|
|
/* Data[3].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
|
|
/* Data[3].ctlEdges[1].bChannel */ FREQ2FBIN(5200, 0),
|
|
/* Data[3].ctlEdges[2].bChannel */ FREQ2FBIN(5260, 0),
|
|
/* Data[3].ctlEdges[3].bChannel */ FREQ2FBIN(5320, 0),
|
|
/* Data[3].ctlEdges[4].bChannel */ FREQ2FBIN(5500, 0),
|
|
/* Data[3].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0),
|
|
/* Data[3].ctlEdges[6].bChannel */ 0xFF,
|
|
/* Data[3].ctlEdges[7].bChannel */ 0xFF,
|
|
},
|
|
|
|
{
|
|
/* Data[4].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
|
|
/* Data[4].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0),
|
|
/* Data[4].ctlEdges[2].bChannel */ FREQ2FBIN(5500, 0),
|
|
/* Data[4].ctlEdges[3].bChannel */ FREQ2FBIN(5700, 0),
|
|
/* Data[4].ctlEdges[4].bChannel */ 0xFF,
|
|
/* Data[4].ctlEdges[5].bChannel */ 0xFF,
|
|
/* Data[4].ctlEdges[6].bChannel */ 0xFF,
|
|
/* Data[4].ctlEdges[7].bChannel */ 0xFF,
|
|
},
|
|
|
|
{
|
|
/* Data[5].ctlEdges[0].bChannel */ FREQ2FBIN(5190, 0),
|
|
/* Data[5].ctlEdges[1].bChannel */ FREQ2FBIN(5270, 0),
|
|
/* Data[5].ctlEdges[2].bChannel */ FREQ2FBIN(5310, 0),
|
|
/* Data[5].ctlEdges[3].bChannel */ FREQ2FBIN(5510, 0),
|
|
/* Data[5].ctlEdges[4].bChannel */ FREQ2FBIN(5590, 0),
|
|
/* Data[5].ctlEdges[5].bChannel */ FREQ2FBIN(5670, 0),
|
|
/* Data[5].ctlEdges[6].bChannel */ 0xFF,
|
|
/* Data[5].ctlEdges[7].bChannel */ 0xFF
|
|
},
|
|
|
|
{
|
|
/* Data[6].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
|
|
/* Data[6].ctlEdges[1].bChannel */ FREQ2FBIN(5200, 0),
|
|
/* Data[6].ctlEdges[2].bChannel */ FREQ2FBIN(5220, 0),
|
|
/* Data[6].ctlEdges[3].bChannel */ FREQ2FBIN(5260, 0),
|
|
/* Data[6].ctlEdges[4].bChannel */ FREQ2FBIN(5500, 0),
|
|
/* Data[6].ctlEdges[5].bChannel */ FREQ2FBIN(5600, 0),
|
|
/* Data[6].ctlEdges[6].bChannel */ FREQ2FBIN(5700, 0),
|
|
/* Data[6].ctlEdges[7].bChannel */ FREQ2FBIN(5745, 0)
|
|
},
|
|
|
|
{
|
|
/* Data[7].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
|
|
/* Data[7].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0),
|
|
/* Data[7].ctlEdges[2].bChannel */ FREQ2FBIN(5320, 0),
|
|
/* Data[7].ctlEdges[3].bChannel */ FREQ2FBIN(5500, 0),
|
|
/* Data[7].ctlEdges[4].bChannel */ FREQ2FBIN(5560, 0),
|
|
/* Data[7].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0),
|
|
/* Data[7].ctlEdges[6].bChannel */ FREQ2FBIN(5745, 0),
|
|
/* Data[7].ctlEdges[7].bChannel */ FREQ2FBIN(5825, 0)
|
|
},
|
|
|
|
{
|
|
/* Data[8].ctlEdges[0].bChannel */ FREQ2FBIN(5190, 0),
|
|
/* Data[8].ctlEdges[1].bChannel */ FREQ2FBIN(5230, 0),
|
|
/* Data[8].ctlEdges[2].bChannel */ FREQ2FBIN(5270, 0),
|
|
/* Data[8].ctlEdges[3].bChannel */ FREQ2FBIN(5510, 0),
|
|
/* Data[8].ctlEdges[4].bChannel */ FREQ2FBIN(5550, 0),
|
|
/* Data[8].ctlEdges[5].bChannel */ FREQ2FBIN(5670, 0),
|
|
/* Data[8].ctlEdges[6].bChannel */ FREQ2FBIN(5755, 0),
|
|
/* Data[8].ctlEdges[7].bChannel */ FREQ2FBIN(5795, 0)
|
|
}
|
|
},
|
|
.ctlPowerData_5G = {
|
|
{
|
|
{
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 1),
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0),
|
|
CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
|
|
CTL(60, 0), CTL(60, 0), CTL(60, 0), CTL(60, 0),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
|
|
CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1),
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 1), CTL(60, 0), CTL(60, 1), CTL(60, 1),
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1),
|
|
}
|
|
},
|
|
}
|
|
};
|
|
|
|
static const struct ar9300_eeprom ar9300_x113 = {
|
|
.eepromVersion = 2,
|
|
.templateVersion = 6,
|
|
.macAddr = {0x00, 0x03, 0x7f, 0x0, 0x0, 0x0},
|
|
.custData = {"x113-023-f0000"},
|
|
.baseEepHeader = {
|
|
.regDmn = { LE16(0), LE16(0x1f) },
|
|
.txrxMask = 0x77, /* 4 bits tx and 4 bits rx */
|
|
.opCapFlags = {
|
|
.opFlags = AR5416_OPFLAGS_11A,
|
|
.eepMisc = 0,
|
|
},
|
|
.rfSilent = 0,
|
|
.blueToothOptions = 0,
|
|
.deviceCap = 0,
|
|
.deviceType = 5, /* takes lower byte in eeprom location */
|
|
.pwrTableOffset = AR9300_PWR_TABLE_OFFSET,
|
|
.params_for_tuning_caps = {0, 0},
|
|
.featureEnable = 0x0d,
|
|
/*
|
|
* bit0 - enable tx temp comp - disabled
|
|
* bit1 - enable tx volt comp - disabled
|
|
* bit2 - enable fastClock - enabled
|
|
* bit3 - enable doubling - enabled
|
|
* bit4 - enable internal regulator - disabled
|
|
* bit5 - enable pa predistortion - disabled
|
|
*/
|
|
.miscConfiguration = 0, /* bit0 - turn down drivestrength */
|
|
.eepromWriteEnableGpio = 6,
|
|
.wlanDisableGpio = 0,
|
|
.wlanLedGpio = 8,
|
|
.rxBandSelectGpio = 0xff,
|
|
.txrxgain = 0x21,
|
|
.swreg = 0,
|
|
},
|
|
.modalHeader2G = {
|
|
/* ar9300_modal_eep_header 2g */
|
|
/* 4 idle,t1,t2,b(4 bits per setting) */
|
|
.antCtrlCommon = LE32(0x110),
|
|
/* 4 ra1l1, ra2l1, ra1l2, ra2l2, ra12 */
|
|
.antCtrlCommon2 = LE32(0x44444),
|
|
|
|
/*
|
|
* antCtrlChain[AR9300_MAX_CHAINS]; 6 idle, t, r,
|
|
* rx1, rx12, b (2 bits each)
|
|
*/
|
|
.antCtrlChain = { LE16(0x150), LE16(0x150), LE16(0x150) },
|
|
|
|
/*
|
|
* xatten1DB[AR9300_MAX_CHAINS]; 3 xatten1_db
|
|
* for ar9280 (0xa20c/b20c 5:0)
|
|
*/
|
|
.xatten1DB = {0, 0, 0},
|
|
|
|
/*
|
|
* xatten1Margin[AR9300_MAX_CHAINS]; 3 xatten1_margin
|
|
* for ar9280 (0xa20c/b20c 16:12
|
|
*/
|
|
.xatten1Margin = {0, 0, 0},
|
|
.tempSlope = 25,
|
|
.voltSlope = 0,
|
|
|
|
/*
|
|
* spurChans[OSPREY_EEPROM_MODAL_SPURS]; spur
|
|
* channels in usual fbin coding format
|
|
*/
|
|
.spurChans = {FREQ2FBIN(2464, 1), 0, 0, 0, 0},
|
|
|
|
/*
|
|
* noiseFloorThreshCh[AR9300_MAX_CHAINS]; 3 Check
|
|
* if the register is per chain
|
|
*/
|
|
.noiseFloorThreshCh = {-1, 0, 0},
|
|
.reserved = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
|
|
.quick_drop = 0,
|
|
.xpaBiasLvl = 0,
|
|
.txFrameToDataStart = 0x0e,
|
|
.txFrameToPaOn = 0x0e,
|
|
.txClip = 3, /* 4 bits tx_clip, 4 bits dac_scale_cck */
|
|
.antennaGain = 0,
|
|
.switchSettling = 0x2c,
|
|
.adcDesiredSize = -30,
|
|
.txEndToXpaOff = 0,
|
|
.txEndToRxOn = 0x2,
|
|
.txFrameToXpaOn = 0xe,
|
|
.thresh62 = 28,
|
|
.papdRateMaskHt20 = LE32(0x0c80c080),
|
|
.papdRateMaskHt40 = LE32(0x0080c080),
|
|
.futureModal = {
|
|
0, 0, 0, 0, 0, 0, 0, 0,
|
|
},
|
|
},
|
|
.base_ext1 = {
|
|
.ant_div_control = 0,
|
|
.future = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
|
|
},
|
|
.calFreqPier2G = {
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2437, 1),
|
|
FREQ2FBIN(2472, 1),
|
|
},
|
|
/* ar9300_cal_data_per_freq_op_loop 2g */
|
|
.calPierData2G = {
|
|
{ {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} },
|
|
{ {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} },
|
|
{ {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} },
|
|
},
|
|
.calTarget_freqbin_Cck = {
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2472, 1),
|
|
},
|
|
.calTarget_freqbin_2G = {
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2437, 1),
|
|
FREQ2FBIN(2472, 1)
|
|
},
|
|
.calTarget_freqbin_2GHT20 = {
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2437, 1),
|
|
FREQ2FBIN(2472, 1)
|
|
},
|
|
.calTarget_freqbin_2GHT40 = {
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2437, 1),
|
|
FREQ2FBIN(2472, 1)
|
|
},
|
|
.calTargetPowerCck = {
|
|
/* 1L-5L,5S,11L,11S */
|
|
{ {34, 34, 34, 34} },
|
|
{ {34, 34, 34, 34} },
|
|
},
|
|
.calTargetPower2G = {
|
|
/* 6-24,36,48,54 */
|
|
{ {34, 34, 32, 32} },
|
|
{ {34, 34, 32, 32} },
|
|
{ {34, 34, 32, 32} },
|
|
},
|
|
.calTargetPower2GHT20 = {
|
|
{ {32, 32, 32, 32, 32, 28, 32, 32, 30, 28, 0, 0, 0, 0} },
|
|
{ {32, 32, 32, 32, 32, 28, 32, 32, 30, 28, 0, 0, 0, 0} },
|
|
{ {32, 32, 32, 32, 32, 28, 32, 32, 30, 28, 0, 0, 0, 0} },
|
|
},
|
|
.calTargetPower2GHT40 = {
|
|
{ {30, 30, 30, 30, 30, 28, 30, 30, 28, 26, 0, 0, 0, 0} },
|
|
{ {30, 30, 30, 30, 30, 28, 30, 30, 28, 26, 0, 0, 0, 0} },
|
|
{ {30, 30, 30, 30, 30, 28, 30, 30, 28, 26, 0, 0, 0, 0} },
|
|
},
|
|
.ctlIndex_2G = {
|
|
0x11, 0x12, 0x15, 0x17, 0x41, 0x42,
|
|
0x45, 0x47, 0x31, 0x32, 0x35, 0x37,
|
|
},
|
|
.ctl_freqbin_2G = {
|
|
{
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2417, 1),
|
|
FREQ2FBIN(2457, 1),
|
|
FREQ2FBIN(2462, 1)
|
|
},
|
|
{
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2417, 1),
|
|
FREQ2FBIN(2462, 1),
|
|
0xFF,
|
|
},
|
|
|
|
{
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2417, 1),
|
|
FREQ2FBIN(2462, 1),
|
|
0xFF,
|
|
},
|
|
{
|
|
FREQ2FBIN(2422, 1),
|
|
FREQ2FBIN(2427, 1),
|
|
FREQ2FBIN(2447, 1),
|
|
FREQ2FBIN(2452, 1)
|
|
},
|
|
|
|
{
|
|
/* Data[4].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
|
|
/* Data[4].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
|
|
/* Data[4].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
|
|
/* Data[4].ctlEdges[3].bChannel */ FREQ2FBIN(2484, 1),
|
|
},
|
|
|
|
{
|
|
/* Data[5].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
|
|
/* Data[5].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
|
|
/* Data[5].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
|
|
0,
|
|
},
|
|
|
|
{
|
|
/* Data[6].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
|
|
/* Data[6].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
|
|
FREQ2FBIN(2472, 1),
|
|
0,
|
|
},
|
|
|
|
{
|
|
/* Data[7].ctlEdges[0].bChannel */ FREQ2FBIN(2422, 1),
|
|
/* Data[7].ctlEdges[1].bChannel */ FREQ2FBIN(2427, 1),
|
|
/* Data[7].ctlEdges[2].bChannel */ FREQ2FBIN(2447, 1),
|
|
/* Data[7].ctlEdges[3].bChannel */ FREQ2FBIN(2462, 1),
|
|
},
|
|
|
|
{
|
|
/* Data[8].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
|
|
/* Data[8].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
|
|
/* Data[8].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
|
|
},
|
|
|
|
{
|
|
/* Data[9].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
|
|
/* Data[9].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
|
|
/* Data[9].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
|
|
0
|
|
},
|
|
|
|
{
|
|
/* Data[10].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
|
|
/* Data[10].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
|
|
/* Data[10].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
|
|
0
|
|
},
|
|
|
|
{
|
|
/* Data[11].ctlEdges[0].bChannel */ FREQ2FBIN(2422, 1),
|
|
/* Data[11].ctlEdges[1].bChannel */ FREQ2FBIN(2427, 1),
|
|
/* Data[11].ctlEdges[2].bChannel */ FREQ2FBIN(2447, 1),
|
|
/* Data[11].ctlEdges[3].bChannel */ FREQ2FBIN(2462, 1),
|
|
}
|
|
},
|
|
.ctlPowerData_2G = {
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
|
|
{ { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } },
|
|
|
|
{ { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0) } },
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
|
|
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0) } },
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
|
|
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } },
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } },
|
|
},
|
|
.modalHeader5G = {
|
|
/* 4 idle,t1,t2,b (4 bits per setting) */
|
|
.antCtrlCommon = LE32(0x220),
|
|
/* 4 ra1l1, ra2l1, ra1l2,ra2l2,ra12 */
|
|
.antCtrlCommon2 = LE32(0x11111),
|
|
/* antCtrlChain 6 idle, t,r,rx1,rx12,b (2 bits each) */
|
|
.antCtrlChain = {
|
|
LE16(0x150), LE16(0x150), LE16(0x150),
|
|
},
|
|
/* xatten1DB 3 xatten1_db for AR9280 (0xa20c/b20c 5:0) */
|
|
.xatten1DB = {0, 0, 0},
|
|
|
|
/*
|
|
* xatten1Margin[AR9300_MAX_CHAINS]; 3 xatten1_margin
|
|
* for merlin (0xa20c/b20c 16:12
|
|
*/
|
|
.xatten1Margin = {0, 0, 0},
|
|
.tempSlope = 68,
|
|
.voltSlope = 0,
|
|
/* spurChans spur channels in usual fbin coding format */
|
|
.spurChans = {FREQ2FBIN(5500, 0), 0, 0, 0, 0},
|
|
/* noiseFloorThreshCh Check if the register is per chain */
|
|
.noiseFloorThreshCh = {-1, 0, 0},
|
|
.reserved = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
|
|
.quick_drop = 0,
|
|
.xpaBiasLvl = 0xf,
|
|
.txFrameToDataStart = 0x0e,
|
|
.txFrameToPaOn = 0x0e,
|
|
.txClip = 3, /* 4 bits tx_clip, 4 bits dac_scale_cck */
|
|
.antennaGain = 0,
|
|
.switchSettling = 0x2d,
|
|
.adcDesiredSize = -30,
|
|
.txEndToXpaOff = 0,
|
|
.txEndToRxOn = 0x2,
|
|
.txFrameToXpaOn = 0xe,
|
|
.thresh62 = 28,
|
|
.papdRateMaskHt20 = LE32(0x0cf0e0e0),
|
|
.papdRateMaskHt40 = LE32(0x6cf0e0e0),
|
|
.futureModal = {
|
|
0, 0, 0, 0, 0, 0, 0, 0,
|
|
},
|
|
},
|
|
.base_ext2 = {
|
|
.tempSlopeLow = 72,
|
|
.tempSlopeHigh = 105,
|
|
.xatten1DBLow = {0, 0, 0},
|
|
.xatten1MarginLow = {0, 0, 0},
|
|
.xatten1DBHigh = {0, 0, 0},
|
|
.xatten1MarginHigh = {0, 0, 0}
|
|
},
|
|
.calFreqPier5G = {
|
|
FREQ2FBIN(5180, 0),
|
|
FREQ2FBIN(5240, 0),
|
|
FREQ2FBIN(5320, 0),
|
|
FREQ2FBIN(5400, 0),
|
|
FREQ2FBIN(5500, 0),
|
|
FREQ2FBIN(5600, 0),
|
|
FREQ2FBIN(5745, 0),
|
|
FREQ2FBIN(5785, 0)
|
|
},
|
|
.calPierData5G = {
|
|
{
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
},
|
|
{
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
},
|
|
{
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
},
|
|
|
|
},
|
|
.calTarget_freqbin_5G = {
|
|
FREQ2FBIN(5180, 0),
|
|
FREQ2FBIN(5220, 0),
|
|
FREQ2FBIN(5320, 0),
|
|
FREQ2FBIN(5400, 0),
|
|
FREQ2FBIN(5500, 0),
|
|
FREQ2FBIN(5600, 0),
|
|
FREQ2FBIN(5745, 0),
|
|
FREQ2FBIN(5785, 0)
|
|
},
|
|
.calTarget_freqbin_5GHT20 = {
|
|
FREQ2FBIN(5180, 0),
|
|
FREQ2FBIN(5240, 0),
|
|
FREQ2FBIN(5320, 0),
|
|
FREQ2FBIN(5400, 0),
|
|
FREQ2FBIN(5500, 0),
|
|
FREQ2FBIN(5700, 0),
|
|
FREQ2FBIN(5745, 0),
|
|
FREQ2FBIN(5825, 0)
|
|
},
|
|
.calTarget_freqbin_5GHT40 = {
|
|
FREQ2FBIN(5190, 0),
|
|
FREQ2FBIN(5230, 0),
|
|
FREQ2FBIN(5320, 0),
|
|
FREQ2FBIN(5410, 0),
|
|
FREQ2FBIN(5510, 0),
|
|
FREQ2FBIN(5670, 0),
|
|
FREQ2FBIN(5755, 0),
|
|
FREQ2FBIN(5825, 0)
|
|
},
|
|
.calTargetPower5G = {
|
|
/* 6-24,36,48,54 */
|
|
{ {42, 40, 40, 34} },
|
|
{ {42, 40, 40, 34} },
|
|
{ {42, 40, 40, 34} },
|
|
{ {42, 40, 40, 34} },
|
|
{ {42, 40, 40, 34} },
|
|
{ {42, 40, 40, 34} },
|
|
{ {42, 40, 40, 34} },
|
|
{ {42, 40, 40, 34} },
|
|
},
|
|
.calTargetPower5GHT20 = {
|
|
/*
|
|
* 0_8_16,1-3_9-11_17-19,
|
|
* 4,5,6,7,12,13,14,15,20,21,22,23
|
|
*/
|
|
{ {40, 40, 40, 40, 32, 28, 40, 40, 32, 28, 40, 40, 32, 20} },
|
|
{ {40, 40, 40, 40, 32, 28, 40, 40, 32, 28, 40, 40, 32, 20} },
|
|
{ {40, 40, 40, 40, 32, 28, 40, 40, 32, 28, 40, 40, 32, 20} },
|
|
{ {40, 40, 40, 40, 32, 28, 40, 40, 32, 28, 40, 40, 32, 20} },
|
|
{ {40, 40, 40, 40, 32, 28, 40, 40, 32, 28, 40, 40, 32, 20} },
|
|
{ {40, 40, 40, 40, 32, 28, 40, 40, 32, 28, 40, 40, 32, 20} },
|
|
{ {38, 38, 38, 38, 32, 28, 38, 38, 32, 28, 38, 38, 32, 26} },
|
|
{ {36, 36, 36, 36, 32, 28, 36, 36, 32, 28, 36, 36, 32, 26} },
|
|
},
|
|
.calTargetPower5GHT40 = {
|
|
/*
|
|
* 0_8_16,1-3_9-11_17-19,
|
|
* 4,5,6,7,12,13,14,15,20,21,22,23
|
|
*/
|
|
{ {40, 40, 40, 38, 30, 26, 40, 40, 30, 26, 40, 40, 30, 24} },
|
|
{ {40, 40, 40, 38, 30, 26, 40, 40, 30, 26, 40, 40, 30, 24} },
|
|
{ {40, 40, 40, 38, 30, 26, 40, 40, 30, 26, 40, 40, 30, 24} },
|
|
{ {40, 40, 40, 38, 30, 26, 40, 40, 30, 26, 40, 40, 30, 24} },
|
|
{ {40, 40, 40, 38, 30, 26, 40, 40, 30, 26, 40, 40, 30, 24} },
|
|
{ {40, 40, 40, 38, 30, 26, 40, 40, 30, 26, 40, 40, 30, 24} },
|
|
{ {36, 36, 36, 36, 30, 26, 36, 36, 30, 26, 36, 36, 30, 24} },
|
|
{ {34, 34, 34, 34, 30, 26, 34, 34, 30, 26, 34, 34, 30, 24} },
|
|
},
|
|
.ctlIndex_5G = {
|
|
0x10, 0x16, 0x18, 0x40, 0x46,
|
|
0x48, 0x30, 0x36, 0x38
|
|
},
|
|
.ctl_freqbin_5G = {
|
|
{
|
|
/* Data[0].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
|
|
/* Data[0].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0),
|
|
/* Data[0].ctlEdges[2].bChannel */ FREQ2FBIN(5280, 0),
|
|
/* Data[0].ctlEdges[3].bChannel */ FREQ2FBIN(5500, 0),
|
|
/* Data[0].ctlEdges[4].bChannel */ FREQ2FBIN(5600, 0),
|
|
/* Data[0].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0),
|
|
/* Data[0].ctlEdges[6].bChannel */ FREQ2FBIN(5745, 0),
|
|
/* Data[0].ctlEdges[7].bChannel */ FREQ2FBIN(5825, 0)
|
|
},
|
|
{
|
|
/* Data[1].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
|
|
/* Data[1].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0),
|
|
/* Data[1].ctlEdges[2].bChannel */ FREQ2FBIN(5280, 0),
|
|
/* Data[1].ctlEdges[3].bChannel */ FREQ2FBIN(5500, 0),
|
|
/* Data[1].ctlEdges[4].bChannel */ FREQ2FBIN(5520, 0),
|
|
/* Data[1].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0),
|
|
/* Data[1].ctlEdges[6].bChannel */ FREQ2FBIN(5745, 0),
|
|
/* Data[1].ctlEdges[7].bChannel */ FREQ2FBIN(5825, 0)
|
|
},
|
|
|
|
{
|
|
/* Data[2].ctlEdges[0].bChannel */ FREQ2FBIN(5190, 0),
|
|
/* Data[2].ctlEdges[1].bChannel */ FREQ2FBIN(5230, 0),
|
|
/* Data[2].ctlEdges[2].bChannel */ FREQ2FBIN(5270, 0),
|
|
/* Data[2].ctlEdges[3].bChannel */ FREQ2FBIN(5310, 0),
|
|
/* Data[2].ctlEdges[4].bChannel */ FREQ2FBIN(5510, 0),
|
|
/* Data[2].ctlEdges[5].bChannel */ FREQ2FBIN(5550, 0),
|
|
/* Data[2].ctlEdges[6].bChannel */ FREQ2FBIN(5670, 0),
|
|
/* Data[2].ctlEdges[7].bChannel */ FREQ2FBIN(5755, 0)
|
|
},
|
|
|
|
{
|
|
/* Data[3].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
|
|
/* Data[3].ctlEdges[1].bChannel */ FREQ2FBIN(5200, 0),
|
|
/* Data[3].ctlEdges[2].bChannel */ FREQ2FBIN(5260, 0),
|
|
/* Data[3].ctlEdges[3].bChannel */ FREQ2FBIN(5320, 0),
|
|
/* Data[3].ctlEdges[4].bChannel */ FREQ2FBIN(5500, 0),
|
|
/* Data[3].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0),
|
|
/* Data[3].ctlEdges[6].bChannel */ 0xFF,
|
|
/* Data[3].ctlEdges[7].bChannel */ 0xFF,
|
|
},
|
|
|
|
{
|
|
/* Data[4].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
|
|
/* Data[4].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0),
|
|
/* Data[4].ctlEdges[2].bChannel */ FREQ2FBIN(5500, 0),
|
|
/* Data[4].ctlEdges[3].bChannel */ FREQ2FBIN(5700, 0),
|
|
/* Data[4].ctlEdges[4].bChannel */ 0xFF,
|
|
/* Data[4].ctlEdges[5].bChannel */ 0xFF,
|
|
/* Data[4].ctlEdges[6].bChannel */ 0xFF,
|
|
/* Data[4].ctlEdges[7].bChannel */ 0xFF,
|
|
},
|
|
|
|
{
|
|
/* Data[5].ctlEdges[0].bChannel */ FREQ2FBIN(5190, 0),
|
|
/* Data[5].ctlEdges[1].bChannel */ FREQ2FBIN(5270, 0),
|
|
/* Data[5].ctlEdges[2].bChannel */ FREQ2FBIN(5310, 0),
|
|
/* Data[5].ctlEdges[3].bChannel */ FREQ2FBIN(5510, 0),
|
|
/* Data[5].ctlEdges[4].bChannel */ FREQ2FBIN(5590, 0),
|
|
/* Data[5].ctlEdges[5].bChannel */ FREQ2FBIN(5670, 0),
|
|
/* Data[5].ctlEdges[6].bChannel */ 0xFF,
|
|
/* Data[5].ctlEdges[7].bChannel */ 0xFF
|
|
},
|
|
|
|
{
|
|
/* Data[6].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
|
|
/* Data[6].ctlEdges[1].bChannel */ FREQ2FBIN(5200, 0),
|
|
/* Data[6].ctlEdges[2].bChannel */ FREQ2FBIN(5220, 0),
|
|
/* Data[6].ctlEdges[3].bChannel */ FREQ2FBIN(5260, 0),
|
|
/* Data[6].ctlEdges[4].bChannel */ FREQ2FBIN(5500, 0),
|
|
/* Data[6].ctlEdges[5].bChannel */ FREQ2FBIN(5600, 0),
|
|
/* Data[6].ctlEdges[6].bChannel */ FREQ2FBIN(5700, 0),
|
|
/* Data[6].ctlEdges[7].bChannel */ FREQ2FBIN(5745, 0)
|
|
},
|
|
|
|
{
|
|
/* Data[7].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
|
|
/* Data[7].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0),
|
|
/* Data[7].ctlEdges[2].bChannel */ FREQ2FBIN(5320, 0),
|
|
/* Data[7].ctlEdges[3].bChannel */ FREQ2FBIN(5500, 0),
|
|
/* Data[7].ctlEdges[4].bChannel */ FREQ2FBIN(5560, 0),
|
|
/* Data[7].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0),
|
|
/* Data[7].ctlEdges[6].bChannel */ FREQ2FBIN(5745, 0),
|
|
/* Data[7].ctlEdges[7].bChannel */ FREQ2FBIN(5825, 0)
|
|
},
|
|
|
|
{
|
|
/* Data[8].ctlEdges[0].bChannel */ FREQ2FBIN(5190, 0),
|
|
/* Data[8].ctlEdges[1].bChannel */ FREQ2FBIN(5230, 0),
|
|
/* Data[8].ctlEdges[2].bChannel */ FREQ2FBIN(5270, 0),
|
|
/* Data[8].ctlEdges[3].bChannel */ FREQ2FBIN(5510, 0),
|
|
/* Data[8].ctlEdges[4].bChannel */ FREQ2FBIN(5550, 0),
|
|
/* Data[8].ctlEdges[5].bChannel */ FREQ2FBIN(5670, 0),
|
|
/* Data[8].ctlEdges[6].bChannel */ FREQ2FBIN(5755, 0),
|
|
/* Data[8].ctlEdges[7].bChannel */ FREQ2FBIN(5795, 0)
|
|
}
|
|
},
|
|
.ctlPowerData_5G = {
|
|
{
|
|
{
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 1),
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0),
|
|
CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
|
|
CTL(60, 0), CTL(60, 0), CTL(60, 0), CTL(60, 0),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
|
|
CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1),
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 1), CTL(60, 0), CTL(60, 1), CTL(60, 1),
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1),
|
|
}
|
|
},
|
|
}
|
|
};
|
|
|
|
|
|
static const struct ar9300_eeprom ar9300_h112 = {
|
|
.eepromVersion = 2,
|
|
.templateVersion = 3,
|
|
.macAddr = {0x00, 0x03, 0x7f, 0x0, 0x0, 0x0},
|
|
.custData = {"h112-241-f0000"},
|
|
.baseEepHeader = {
|
|
.regDmn = { LE16(0), LE16(0x1f) },
|
|
.txrxMask = 0x77, /* 4 bits tx and 4 bits rx */
|
|
.opCapFlags = {
|
|
.opFlags = AR5416_OPFLAGS_11G | AR5416_OPFLAGS_11A,
|
|
.eepMisc = 0,
|
|
},
|
|
.rfSilent = 0,
|
|
.blueToothOptions = 0,
|
|
.deviceCap = 0,
|
|
.deviceType = 5, /* takes lower byte in eeprom location */
|
|
.pwrTableOffset = AR9300_PWR_TABLE_OFFSET,
|
|
.params_for_tuning_caps = {0, 0},
|
|
.featureEnable = 0x0d,
|
|
/*
|
|
* bit0 - enable tx temp comp - disabled
|
|
* bit1 - enable tx volt comp - disabled
|
|
* bit2 - enable fastClock - enabled
|
|
* bit3 - enable doubling - enabled
|
|
* bit4 - enable internal regulator - disabled
|
|
* bit5 - enable pa predistortion - disabled
|
|
*/
|
|
.miscConfiguration = 0, /* bit0 - turn down drivestrength */
|
|
.eepromWriteEnableGpio = 6,
|
|
.wlanDisableGpio = 0,
|
|
.wlanLedGpio = 8,
|
|
.rxBandSelectGpio = 0xff,
|
|
.txrxgain = 0x10,
|
|
.swreg = 0,
|
|
},
|
|
.modalHeader2G = {
|
|
/* ar9300_modal_eep_header 2g */
|
|
/* 4 idle,t1,t2,b(4 bits per setting) */
|
|
.antCtrlCommon = LE32(0x110),
|
|
/* 4 ra1l1, ra2l1, ra1l2, ra2l2, ra12 */
|
|
.antCtrlCommon2 = LE32(0x44444),
|
|
|
|
/*
|
|
* antCtrlChain[AR9300_MAX_CHAINS]; 6 idle, t, r,
|
|
* rx1, rx12, b (2 bits each)
|
|
*/
|
|
.antCtrlChain = { LE16(0x150), LE16(0x150), LE16(0x150) },
|
|
|
|
/*
|
|
* xatten1DB[AR9300_MAX_CHAINS]; 3 xatten1_db
|
|
* for ar9280 (0xa20c/b20c 5:0)
|
|
*/
|
|
.xatten1DB = {0, 0, 0},
|
|
|
|
/*
|
|
* xatten1Margin[AR9300_MAX_CHAINS]; 3 xatten1_margin
|
|
* for ar9280 (0xa20c/b20c 16:12
|
|
*/
|
|
.xatten1Margin = {0, 0, 0},
|
|
.tempSlope = 25,
|
|
.voltSlope = 0,
|
|
|
|
/*
|
|
* spurChans[OSPREY_EEPROM_MODAL_SPURS]; spur
|
|
* channels in usual fbin coding format
|
|
*/
|
|
.spurChans = {FREQ2FBIN(2464, 1), 0, 0, 0, 0},
|
|
|
|
/*
|
|
* noiseFloorThreshCh[AR9300_MAX_CHAINS]; 3 Check
|
|
* if the register is per chain
|
|
*/
|
|
.noiseFloorThreshCh = {-1, 0, 0},
|
|
.reserved = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
|
|
.quick_drop = 0,
|
|
.xpaBiasLvl = 0,
|
|
.txFrameToDataStart = 0x0e,
|
|
.txFrameToPaOn = 0x0e,
|
|
.txClip = 3, /* 4 bits tx_clip, 4 bits dac_scale_cck */
|
|
.antennaGain = 0,
|
|
.switchSettling = 0x2c,
|
|
.adcDesiredSize = -30,
|
|
.txEndToXpaOff = 0,
|
|
.txEndToRxOn = 0x2,
|
|
.txFrameToXpaOn = 0xe,
|
|
.thresh62 = 28,
|
|
.papdRateMaskHt20 = LE32(0x0c80c080),
|
|
.papdRateMaskHt40 = LE32(0x0080c080),
|
|
.futureModal = {
|
|
0, 0, 0, 0, 0, 0, 0, 0,
|
|
},
|
|
},
|
|
.base_ext1 = {
|
|
.ant_div_control = 0,
|
|
.future = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
|
|
},
|
|
.calFreqPier2G = {
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2437, 1),
|
|
FREQ2FBIN(2462, 1),
|
|
},
|
|
/* ar9300_cal_data_per_freq_op_loop 2g */
|
|
.calPierData2G = {
|
|
{ {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} },
|
|
{ {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} },
|
|
{ {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} },
|
|
},
|
|
.calTarget_freqbin_Cck = {
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2472, 1),
|
|
},
|
|
.calTarget_freqbin_2G = {
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2437, 1),
|
|
FREQ2FBIN(2472, 1)
|
|
},
|
|
.calTarget_freqbin_2GHT20 = {
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2437, 1),
|
|
FREQ2FBIN(2472, 1)
|
|
},
|
|
.calTarget_freqbin_2GHT40 = {
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2437, 1),
|
|
FREQ2FBIN(2472, 1)
|
|
},
|
|
.calTargetPowerCck = {
|
|
/* 1L-5L,5S,11L,11S */
|
|
{ {34, 34, 34, 34} },
|
|
{ {34, 34, 34, 34} },
|
|
},
|
|
.calTargetPower2G = {
|
|
/* 6-24,36,48,54 */
|
|
{ {34, 34, 32, 32} },
|
|
{ {34, 34, 32, 32} },
|
|
{ {34, 34, 32, 32} },
|
|
},
|
|
.calTargetPower2GHT20 = {
|
|
{ {32, 32, 32, 32, 32, 30, 32, 32, 30, 28, 28, 28, 28, 24} },
|
|
{ {32, 32, 32, 32, 32, 30, 32, 32, 30, 28, 28, 28, 28, 24} },
|
|
{ {32, 32, 32, 32, 32, 30, 32, 32, 30, 28, 28, 28, 28, 24} },
|
|
},
|
|
.calTargetPower2GHT40 = {
|
|
{ {30, 30, 30, 30, 30, 28, 30, 30, 28, 26, 26, 26, 26, 22} },
|
|
{ {30, 30, 30, 30, 30, 28, 30, 30, 28, 26, 26, 26, 26, 22} },
|
|
{ {30, 30, 30, 30, 30, 28, 30, 30, 28, 26, 26, 26, 26, 22} },
|
|
},
|
|
.ctlIndex_2G = {
|
|
0x11, 0x12, 0x15, 0x17, 0x41, 0x42,
|
|
0x45, 0x47, 0x31, 0x32, 0x35, 0x37,
|
|
},
|
|
.ctl_freqbin_2G = {
|
|
{
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2417, 1),
|
|
FREQ2FBIN(2457, 1),
|
|
FREQ2FBIN(2462, 1)
|
|
},
|
|
{
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2417, 1),
|
|
FREQ2FBIN(2462, 1),
|
|
0xFF,
|
|
},
|
|
|
|
{
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2417, 1),
|
|
FREQ2FBIN(2462, 1),
|
|
0xFF,
|
|
},
|
|
{
|
|
FREQ2FBIN(2422, 1),
|
|
FREQ2FBIN(2427, 1),
|
|
FREQ2FBIN(2447, 1),
|
|
FREQ2FBIN(2452, 1)
|
|
},
|
|
|
|
{
|
|
/* Data[4].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
|
|
/* Data[4].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
|
|
/* Data[4].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
|
|
/* Data[4].ctlEdges[3].bChannel */ FREQ2FBIN(2484, 1),
|
|
},
|
|
|
|
{
|
|
/* Data[5].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
|
|
/* Data[5].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
|
|
/* Data[5].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
|
|
0,
|
|
},
|
|
|
|
{
|
|
/* Data[6].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
|
|
/* Data[6].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
|
|
FREQ2FBIN(2472, 1),
|
|
0,
|
|
},
|
|
|
|
{
|
|
/* Data[7].ctlEdges[0].bChannel */ FREQ2FBIN(2422, 1),
|
|
/* Data[7].ctlEdges[1].bChannel */ FREQ2FBIN(2427, 1),
|
|
/* Data[7].ctlEdges[2].bChannel */ FREQ2FBIN(2447, 1),
|
|
/* Data[7].ctlEdges[3].bChannel */ FREQ2FBIN(2462, 1),
|
|
},
|
|
|
|
{
|
|
/* Data[8].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
|
|
/* Data[8].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
|
|
/* Data[8].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
|
|
},
|
|
|
|
{
|
|
/* Data[9].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
|
|
/* Data[9].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
|
|
/* Data[9].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
|
|
0
|
|
},
|
|
|
|
{
|
|
/* Data[10].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
|
|
/* Data[10].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
|
|
/* Data[10].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
|
|
0
|
|
},
|
|
|
|
{
|
|
/* Data[11].ctlEdges[0].bChannel */ FREQ2FBIN(2422, 1),
|
|
/* Data[11].ctlEdges[1].bChannel */ FREQ2FBIN(2427, 1),
|
|
/* Data[11].ctlEdges[2].bChannel */ FREQ2FBIN(2447, 1),
|
|
/* Data[11].ctlEdges[3].bChannel */ FREQ2FBIN(2462, 1),
|
|
}
|
|
},
|
|
.ctlPowerData_2G = {
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
|
|
{ { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } },
|
|
|
|
{ { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0) } },
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
|
|
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0) } },
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
|
|
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } },
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } },
|
|
},
|
|
.modalHeader5G = {
|
|
/* 4 idle,t1,t2,b (4 bits per setting) */
|
|
.antCtrlCommon = LE32(0x220),
|
|
/* 4 ra1l1, ra2l1, ra1l2,ra2l2,ra12 */
|
|
.antCtrlCommon2 = LE32(0x44444),
|
|
/* antCtrlChain 6 idle, t,r,rx1,rx12,b (2 bits each) */
|
|
.antCtrlChain = {
|
|
LE16(0x150), LE16(0x150), LE16(0x150),
|
|
},
|
|
/* xatten1DB 3 xatten1_db for AR9280 (0xa20c/b20c 5:0) */
|
|
.xatten1DB = {0, 0, 0},
|
|
|
|
/*
|
|
* xatten1Margin[AR9300_MAX_CHAINS]; 3 xatten1_margin
|
|
* for merlin (0xa20c/b20c 16:12
|
|
*/
|
|
.xatten1Margin = {0, 0, 0},
|
|
.tempSlope = 45,
|
|
.voltSlope = 0,
|
|
/* spurChans spur channels in usual fbin coding format */
|
|
.spurChans = {0, 0, 0, 0, 0},
|
|
/* noiseFloorThreshCh Check if the register is per chain */
|
|
.noiseFloorThreshCh = {-1, 0, 0},
|
|
.reserved = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
|
|
.quick_drop = 0,
|
|
.xpaBiasLvl = 0,
|
|
.txFrameToDataStart = 0x0e,
|
|
.txFrameToPaOn = 0x0e,
|
|
.txClip = 3, /* 4 bits tx_clip, 4 bits dac_scale_cck */
|
|
.antennaGain = 0,
|
|
.switchSettling = 0x2d,
|
|
.adcDesiredSize = -30,
|
|
.txEndToXpaOff = 0,
|
|
.txEndToRxOn = 0x2,
|
|
.txFrameToXpaOn = 0xe,
|
|
.thresh62 = 28,
|
|
.papdRateMaskHt20 = LE32(0x0cf0e0e0),
|
|
.papdRateMaskHt40 = LE32(0x6cf0e0e0),
|
|
.futureModal = {
|
|
0, 0, 0, 0, 0, 0, 0, 0,
|
|
},
|
|
},
|
|
.base_ext2 = {
|
|
.tempSlopeLow = 40,
|
|
.tempSlopeHigh = 50,
|
|
.xatten1DBLow = {0, 0, 0},
|
|
.xatten1MarginLow = {0, 0, 0},
|
|
.xatten1DBHigh = {0, 0, 0},
|
|
.xatten1MarginHigh = {0, 0, 0}
|
|
},
|
|
.calFreqPier5G = {
|
|
FREQ2FBIN(5180, 0),
|
|
FREQ2FBIN(5220, 0),
|
|
FREQ2FBIN(5320, 0),
|
|
FREQ2FBIN(5400, 0),
|
|
FREQ2FBIN(5500, 0),
|
|
FREQ2FBIN(5600, 0),
|
|
FREQ2FBIN(5700, 0),
|
|
FREQ2FBIN(5785, 0)
|
|
},
|
|
.calPierData5G = {
|
|
{
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
},
|
|
{
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
},
|
|
{
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
},
|
|
|
|
},
|
|
.calTarget_freqbin_5G = {
|
|
FREQ2FBIN(5180, 0),
|
|
FREQ2FBIN(5240, 0),
|
|
FREQ2FBIN(5320, 0),
|
|
FREQ2FBIN(5400, 0),
|
|
FREQ2FBIN(5500, 0),
|
|
FREQ2FBIN(5600, 0),
|
|
FREQ2FBIN(5700, 0),
|
|
FREQ2FBIN(5825, 0)
|
|
},
|
|
.calTarget_freqbin_5GHT20 = {
|
|
FREQ2FBIN(5180, 0),
|
|
FREQ2FBIN(5240, 0),
|
|
FREQ2FBIN(5320, 0),
|
|
FREQ2FBIN(5400, 0),
|
|
FREQ2FBIN(5500, 0),
|
|
FREQ2FBIN(5700, 0),
|
|
FREQ2FBIN(5745, 0),
|
|
FREQ2FBIN(5825, 0)
|
|
},
|
|
.calTarget_freqbin_5GHT40 = {
|
|
FREQ2FBIN(5180, 0),
|
|
FREQ2FBIN(5240, 0),
|
|
FREQ2FBIN(5320, 0),
|
|
FREQ2FBIN(5400, 0),
|
|
FREQ2FBIN(5500, 0),
|
|
FREQ2FBIN(5700, 0),
|
|
FREQ2FBIN(5745, 0),
|
|
FREQ2FBIN(5825, 0)
|
|
},
|
|
.calTargetPower5G = {
|
|
/* 6-24,36,48,54 */
|
|
{ {30, 30, 28, 24} },
|
|
{ {30, 30, 28, 24} },
|
|
{ {30, 30, 28, 24} },
|
|
{ {30, 30, 28, 24} },
|
|
{ {30, 30, 28, 24} },
|
|
{ {30, 30, 28, 24} },
|
|
{ {30, 30, 28, 24} },
|
|
{ {30, 30, 28, 24} },
|
|
},
|
|
.calTargetPower5GHT20 = {
|
|
/*
|
|
* 0_8_16,1-3_9-11_17-19,
|
|
* 4,5,6,7,12,13,14,15,20,21,22,23
|
|
*/
|
|
{ {30, 30, 30, 28, 24, 20, 30, 28, 24, 20, 20, 20, 20, 16} },
|
|
{ {30, 30, 30, 28, 24, 20, 30, 28, 24, 20, 20, 20, 20, 16} },
|
|
{ {30, 30, 30, 26, 22, 18, 30, 26, 22, 18, 18, 18, 18, 16} },
|
|
{ {30, 30, 30, 26, 22, 18, 30, 26, 22, 18, 18, 18, 18, 16} },
|
|
{ {30, 30, 30, 24, 20, 16, 30, 24, 20, 16, 16, 16, 16, 14} },
|
|
{ {30, 30, 30, 24, 20, 16, 30, 24, 20, 16, 16, 16, 16, 14} },
|
|
{ {30, 30, 30, 22, 18, 14, 30, 22, 18, 14, 14, 14, 14, 12} },
|
|
{ {30, 30, 30, 22, 18, 14, 30, 22, 18, 14, 14, 14, 14, 12} },
|
|
},
|
|
.calTargetPower5GHT40 = {
|
|
/*
|
|
* 0_8_16,1-3_9-11_17-19,
|
|
* 4,5,6,7,12,13,14,15,20,21,22,23
|
|
*/
|
|
{ {28, 28, 28, 26, 22, 18, 28, 26, 22, 18, 18, 18, 18, 14} },
|
|
{ {28, 28, 28, 26, 22, 18, 28, 26, 22, 18, 18, 18, 18, 14} },
|
|
{ {28, 28, 28, 24, 20, 16, 28, 24, 20, 16, 16, 16, 16, 12} },
|
|
{ {28, 28, 28, 24, 20, 16, 28, 24, 20, 16, 16, 16, 16, 12} },
|
|
{ {28, 28, 28, 22, 18, 14, 28, 22, 18, 14, 14, 14, 14, 10} },
|
|
{ {28, 28, 28, 22, 18, 14, 28, 22, 18, 14, 14, 14, 14, 10} },
|
|
{ {28, 28, 28, 20, 16, 12, 28, 20, 16, 12, 12, 12, 12, 8} },
|
|
{ {28, 28, 28, 20, 16, 12, 28, 20, 16, 12, 12, 12, 12, 8} },
|
|
},
|
|
.ctlIndex_5G = {
|
|
0x10, 0x16, 0x18, 0x40, 0x46,
|
|
0x48, 0x30, 0x36, 0x38
|
|
},
|
|
.ctl_freqbin_5G = {
|
|
{
|
|
/* Data[0].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
|
|
/* Data[0].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0),
|
|
/* Data[0].ctlEdges[2].bChannel */ FREQ2FBIN(5280, 0),
|
|
/* Data[0].ctlEdges[3].bChannel */ FREQ2FBIN(5500, 0),
|
|
/* Data[0].ctlEdges[4].bChannel */ FREQ2FBIN(5600, 0),
|
|
/* Data[0].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0),
|
|
/* Data[0].ctlEdges[6].bChannel */ FREQ2FBIN(5745, 0),
|
|
/* Data[0].ctlEdges[7].bChannel */ FREQ2FBIN(5825, 0)
|
|
},
|
|
{
|
|
/* Data[1].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
|
|
/* Data[1].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0),
|
|
/* Data[1].ctlEdges[2].bChannel */ FREQ2FBIN(5280, 0),
|
|
/* Data[1].ctlEdges[3].bChannel */ FREQ2FBIN(5500, 0),
|
|
/* Data[1].ctlEdges[4].bChannel */ FREQ2FBIN(5520, 0),
|
|
/* Data[1].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0),
|
|
/* Data[1].ctlEdges[6].bChannel */ FREQ2FBIN(5745, 0),
|
|
/* Data[1].ctlEdges[7].bChannel */ FREQ2FBIN(5825, 0)
|
|
},
|
|
|
|
{
|
|
/* Data[2].ctlEdges[0].bChannel */ FREQ2FBIN(5190, 0),
|
|
/* Data[2].ctlEdges[1].bChannel */ FREQ2FBIN(5230, 0),
|
|
/* Data[2].ctlEdges[2].bChannel */ FREQ2FBIN(5270, 0),
|
|
/* Data[2].ctlEdges[3].bChannel */ FREQ2FBIN(5310, 0),
|
|
/* Data[2].ctlEdges[4].bChannel */ FREQ2FBIN(5510, 0),
|
|
/* Data[2].ctlEdges[5].bChannel */ FREQ2FBIN(5550, 0),
|
|
/* Data[2].ctlEdges[6].bChannel */ FREQ2FBIN(5670, 0),
|
|
/* Data[2].ctlEdges[7].bChannel */ FREQ2FBIN(5755, 0)
|
|
},
|
|
|
|
{
|
|
/* Data[3].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
|
|
/* Data[3].ctlEdges[1].bChannel */ FREQ2FBIN(5200, 0),
|
|
/* Data[3].ctlEdges[2].bChannel */ FREQ2FBIN(5260, 0),
|
|
/* Data[3].ctlEdges[3].bChannel */ FREQ2FBIN(5320, 0),
|
|
/* Data[3].ctlEdges[4].bChannel */ FREQ2FBIN(5500, 0),
|
|
/* Data[3].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0),
|
|
/* Data[3].ctlEdges[6].bChannel */ 0xFF,
|
|
/* Data[3].ctlEdges[7].bChannel */ 0xFF,
|
|
},
|
|
|
|
{
|
|
/* Data[4].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
|
|
/* Data[4].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0),
|
|
/* Data[4].ctlEdges[2].bChannel */ FREQ2FBIN(5500, 0),
|
|
/* Data[4].ctlEdges[3].bChannel */ FREQ2FBIN(5700, 0),
|
|
/* Data[4].ctlEdges[4].bChannel */ 0xFF,
|
|
/* Data[4].ctlEdges[5].bChannel */ 0xFF,
|
|
/* Data[4].ctlEdges[6].bChannel */ 0xFF,
|
|
/* Data[4].ctlEdges[7].bChannel */ 0xFF,
|
|
},
|
|
|
|
{
|
|
/* Data[5].ctlEdges[0].bChannel */ FREQ2FBIN(5190, 0),
|
|
/* Data[5].ctlEdges[1].bChannel */ FREQ2FBIN(5270, 0),
|
|
/* Data[5].ctlEdges[2].bChannel */ FREQ2FBIN(5310, 0),
|
|
/* Data[5].ctlEdges[3].bChannel */ FREQ2FBIN(5510, 0),
|
|
/* Data[5].ctlEdges[4].bChannel */ FREQ2FBIN(5590, 0),
|
|
/* Data[5].ctlEdges[5].bChannel */ FREQ2FBIN(5670, 0),
|
|
/* Data[5].ctlEdges[6].bChannel */ 0xFF,
|
|
/* Data[5].ctlEdges[7].bChannel */ 0xFF
|
|
},
|
|
|
|
{
|
|
/* Data[6].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
|
|
/* Data[6].ctlEdges[1].bChannel */ FREQ2FBIN(5200, 0),
|
|
/* Data[6].ctlEdges[2].bChannel */ FREQ2FBIN(5220, 0),
|
|
/* Data[6].ctlEdges[3].bChannel */ FREQ2FBIN(5260, 0),
|
|
/* Data[6].ctlEdges[4].bChannel */ FREQ2FBIN(5500, 0),
|
|
/* Data[6].ctlEdges[5].bChannel */ FREQ2FBIN(5600, 0),
|
|
/* Data[6].ctlEdges[6].bChannel */ FREQ2FBIN(5700, 0),
|
|
/* Data[6].ctlEdges[7].bChannel */ FREQ2FBIN(5745, 0)
|
|
},
|
|
|
|
{
|
|
/* Data[7].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
|
|
/* Data[7].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0),
|
|
/* Data[7].ctlEdges[2].bChannel */ FREQ2FBIN(5320, 0),
|
|
/* Data[7].ctlEdges[3].bChannel */ FREQ2FBIN(5500, 0),
|
|
/* Data[7].ctlEdges[4].bChannel */ FREQ2FBIN(5560, 0),
|
|
/* Data[7].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0),
|
|
/* Data[7].ctlEdges[6].bChannel */ FREQ2FBIN(5745, 0),
|
|
/* Data[7].ctlEdges[7].bChannel */ FREQ2FBIN(5825, 0)
|
|
},
|
|
|
|
{
|
|
/* Data[8].ctlEdges[0].bChannel */ FREQ2FBIN(5190, 0),
|
|
/* Data[8].ctlEdges[1].bChannel */ FREQ2FBIN(5230, 0),
|
|
/* Data[8].ctlEdges[2].bChannel */ FREQ2FBIN(5270, 0),
|
|
/* Data[8].ctlEdges[3].bChannel */ FREQ2FBIN(5510, 0),
|
|
/* Data[8].ctlEdges[4].bChannel */ FREQ2FBIN(5550, 0),
|
|
/* Data[8].ctlEdges[5].bChannel */ FREQ2FBIN(5670, 0),
|
|
/* Data[8].ctlEdges[6].bChannel */ FREQ2FBIN(5755, 0),
|
|
/* Data[8].ctlEdges[7].bChannel */ FREQ2FBIN(5795, 0)
|
|
}
|
|
},
|
|
.ctlPowerData_5G = {
|
|
{
|
|
{
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 1),
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0),
|
|
CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
|
|
CTL(60, 0), CTL(60, 0), CTL(60, 0), CTL(60, 0),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
|
|
CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1),
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 1), CTL(60, 0), CTL(60, 1), CTL(60, 1),
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1),
|
|
}
|
|
},
|
|
}
|
|
};
|
|
|
|
|
|
static const struct ar9300_eeprom ar9300_x112 = {
|
|
.eepromVersion = 2,
|
|
.templateVersion = 5,
|
|
.macAddr = {0x00, 0x03, 0x7f, 0x0, 0x0, 0x0},
|
|
.custData = {"x112-041-f0000"},
|
|
.baseEepHeader = {
|
|
.regDmn = { LE16(0), LE16(0x1f) },
|
|
.txrxMask = 0x77, /* 4 bits tx and 4 bits rx */
|
|
.opCapFlags = {
|
|
.opFlags = AR5416_OPFLAGS_11G | AR5416_OPFLAGS_11A,
|
|
.eepMisc = 0,
|
|
},
|
|
.rfSilent = 0,
|
|
.blueToothOptions = 0,
|
|
.deviceCap = 0,
|
|
.deviceType = 5, /* takes lower byte in eeprom location */
|
|
.pwrTableOffset = AR9300_PWR_TABLE_OFFSET,
|
|
.params_for_tuning_caps = {0, 0},
|
|
.featureEnable = 0x0d,
|
|
/*
|
|
* bit0 - enable tx temp comp - disabled
|
|
* bit1 - enable tx volt comp - disabled
|
|
* bit2 - enable fastclock - enabled
|
|
* bit3 - enable doubling - enabled
|
|
* bit4 - enable internal regulator - disabled
|
|
* bit5 - enable pa predistortion - disabled
|
|
*/
|
|
.miscConfiguration = 0, /* bit0 - turn down drivestrength */
|
|
.eepromWriteEnableGpio = 6,
|
|
.wlanDisableGpio = 0,
|
|
.wlanLedGpio = 8,
|
|
.rxBandSelectGpio = 0xff,
|
|
.txrxgain = 0x0,
|
|
.swreg = 0,
|
|
},
|
|
.modalHeader2G = {
|
|
/* ar9300_modal_eep_header 2g */
|
|
/* 4 idle,t1,t2,b(4 bits per setting) */
|
|
.antCtrlCommon = LE32(0x110),
|
|
/* 4 ra1l1, ra2l1, ra1l2, ra2l2, ra12 */
|
|
.antCtrlCommon2 = LE32(0x22222),
|
|
|
|
/*
|
|
* antCtrlChain[ar9300_max_chains]; 6 idle, t, r,
|
|
* rx1, rx12, b (2 bits each)
|
|
*/
|
|
.antCtrlChain = { LE16(0x10), LE16(0x10), LE16(0x10) },
|
|
|
|
/*
|
|
* xatten1DB[AR9300_max_chains]; 3 xatten1_db
|
|
* for ar9280 (0xa20c/b20c 5:0)
|
|
*/
|
|
.xatten1DB = {0x1b, 0x1b, 0x1b},
|
|
|
|
/*
|
|
* xatten1Margin[ar9300_max_chains]; 3 xatten1_margin
|
|
* for ar9280 (0xa20c/b20c 16:12
|
|
*/
|
|
.xatten1Margin = {0x15, 0x15, 0x15},
|
|
.tempSlope = 50,
|
|
.voltSlope = 0,
|
|
|
|
/*
|
|
* spurChans[OSPrey_eeprom_modal_sPURS]; spur
|
|
* channels in usual fbin coding format
|
|
*/
|
|
.spurChans = {FREQ2FBIN(2464, 1), 0, 0, 0, 0},
|
|
|
|
/*
|
|
* noiseFloorThreshch[ar9300_max_cHAINS]; 3 Check
|
|
* if the register is per chain
|
|
*/
|
|
.noiseFloorThreshCh = {-1, 0, 0},
|
|
.reserved = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
|
|
.quick_drop = 0,
|
|
.xpaBiasLvl = 0,
|
|
.txFrameToDataStart = 0x0e,
|
|
.txFrameToPaOn = 0x0e,
|
|
.txClip = 3, /* 4 bits tx_clip, 4 bits dac_scale_cck */
|
|
.antennaGain = 0,
|
|
.switchSettling = 0x2c,
|
|
.adcDesiredSize = -30,
|
|
.txEndToXpaOff = 0,
|
|
.txEndToRxOn = 0x2,
|
|
.txFrameToXpaOn = 0xe,
|
|
.thresh62 = 28,
|
|
.papdRateMaskHt20 = LE32(0x0c80c080),
|
|
.papdRateMaskHt40 = LE32(0x0080c080),
|
|
.futureModal = {
|
|
0, 0, 0, 0, 0, 0, 0, 0,
|
|
},
|
|
},
|
|
.base_ext1 = {
|
|
.ant_div_control = 0,
|
|
.future = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
|
|
},
|
|
.calFreqPier2G = {
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2437, 1),
|
|
FREQ2FBIN(2472, 1),
|
|
},
|
|
/* ar9300_cal_data_per_freq_op_loop 2g */
|
|
.calPierData2G = {
|
|
{ {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} },
|
|
{ {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} },
|
|
{ {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} },
|
|
},
|
|
.calTarget_freqbin_Cck = {
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2472, 1),
|
|
},
|
|
.calTarget_freqbin_2G = {
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2437, 1),
|
|
FREQ2FBIN(2472, 1)
|
|
},
|
|
.calTarget_freqbin_2GHT20 = {
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2437, 1),
|
|
FREQ2FBIN(2472, 1)
|
|
},
|
|
.calTarget_freqbin_2GHT40 = {
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2437, 1),
|
|
FREQ2FBIN(2472, 1)
|
|
},
|
|
.calTargetPowerCck = {
|
|
/* 1L-5L,5S,11L,11s */
|
|
{ {38, 38, 38, 38} },
|
|
{ {38, 38, 38, 38} },
|
|
},
|
|
.calTargetPower2G = {
|
|
/* 6-24,36,48,54 */
|
|
{ {38, 38, 36, 34} },
|
|
{ {38, 38, 36, 34} },
|
|
{ {38, 38, 34, 32} },
|
|
},
|
|
.calTargetPower2GHT20 = {
|
|
{ {36, 36, 36, 36, 36, 34, 34, 32, 30, 28, 28, 28, 28, 26} },
|
|
{ {36, 36, 36, 36, 36, 34, 36, 34, 32, 30, 30, 30, 28, 26} },
|
|
{ {36, 36, 36, 36, 36, 34, 34, 32, 30, 28, 28, 28, 28, 26} },
|
|
},
|
|
.calTargetPower2GHT40 = {
|
|
{ {36, 36, 36, 36, 34, 32, 32, 30, 28, 26, 26, 26, 26, 24} },
|
|
{ {36, 36, 36, 36, 34, 32, 34, 32, 30, 28, 28, 28, 28, 24} },
|
|
{ {36, 36, 36, 36, 34, 32, 32, 30, 28, 26, 26, 26, 26, 24} },
|
|
},
|
|
.ctlIndex_2G = {
|
|
0x11, 0x12, 0x15, 0x17, 0x41, 0x42,
|
|
0x45, 0x47, 0x31, 0x32, 0x35, 0x37,
|
|
},
|
|
.ctl_freqbin_2G = {
|
|
{
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2417, 1),
|
|
FREQ2FBIN(2457, 1),
|
|
FREQ2FBIN(2462, 1)
|
|
},
|
|
{
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2417, 1),
|
|
FREQ2FBIN(2462, 1),
|
|
0xFF,
|
|
},
|
|
|
|
{
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2417, 1),
|
|
FREQ2FBIN(2462, 1),
|
|
0xFF,
|
|
},
|
|
{
|
|
FREQ2FBIN(2422, 1),
|
|
FREQ2FBIN(2427, 1),
|
|
FREQ2FBIN(2447, 1),
|
|
FREQ2FBIN(2452, 1)
|
|
},
|
|
|
|
{
|
|
/* Data[4].ctledges[0].bchannel */ FREQ2FBIN(2412, 1),
|
|
/* Data[4].ctledges[1].bchannel */ FREQ2FBIN(2417, 1),
|
|
/* Data[4].ctledges[2].bchannel */ FREQ2FBIN(2472, 1),
|
|
/* Data[4].ctledges[3].bchannel */ FREQ2FBIN(2484, 1),
|
|
},
|
|
|
|
{
|
|
/* Data[5].ctledges[0].bchannel */ FREQ2FBIN(2412, 1),
|
|
/* Data[5].ctledges[1].bchannel */ FREQ2FBIN(2417, 1),
|
|
/* Data[5].ctledges[2].bchannel */ FREQ2FBIN(2472, 1),
|
|
0,
|
|
},
|
|
|
|
{
|
|
/* Data[6].ctledges[0].bchannel */ FREQ2FBIN(2412, 1),
|
|
/* Data[6].ctledges[1].bchannel */ FREQ2FBIN(2417, 1),
|
|
FREQ2FBIN(2472, 1),
|
|
0,
|
|
},
|
|
|
|
{
|
|
/* Data[7].ctledges[0].bchannel */ FREQ2FBIN(2422, 1),
|
|
/* Data[7].ctledges[1].bchannel */ FREQ2FBIN(2427, 1),
|
|
/* Data[7].ctledges[2].bchannel */ FREQ2FBIN(2447, 1),
|
|
/* Data[7].ctledges[3].bchannel */ FREQ2FBIN(2462, 1),
|
|
},
|
|
|
|
{
|
|
/* Data[8].ctledges[0].bchannel */ FREQ2FBIN(2412, 1),
|
|
/* Data[8].ctledges[1].bchannel */ FREQ2FBIN(2417, 1),
|
|
/* Data[8].ctledges[2].bchannel */ FREQ2FBIN(2472, 1),
|
|
},
|
|
|
|
{
|
|
/* Data[9].ctledges[0].bchannel */ FREQ2FBIN(2412, 1),
|
|
/* Data[9].ctledges[1].bchannel */ FREQ2FBIN(2417, 1),
|
|
/* Data[9].ctledges[2].bchannel */ FREQ2FBIN(2472, 1),
|
|
0
|
|
},
|
|
|
|
{
|
|
/* Data[10].ctledges[0].bchannel */ FREQ2FBIN(2412, 1),
|
|
/* Data[10].ctledges[1].bchannel */ FREQ2FBIN(2417, 1),
|
|
/* Data[10].ctledges[2].bchannel */ FREQ2FBIN(2472, 1),
|
|
0
|
|
},
|
|
|
|
{
|
|
/* Data[11].ctledges[0].bchannel */ FREQ2FBIN(2422, 1),
|
|
/* Data[11].ctledges[1].bchannel */ FREQ2FBIN(2427, 1),
|
|
/* Data[11].ctledges[2].bchannel */ FREQ2FBIN(2447, 1),
|
|
/* Data[11].ctledges[3].bchannel */ FREQ2FBIN(2462, 1),
|
|
}
|
|
},
|
|
.ctlPowerData_2G = {
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
|
|
{ { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } },
|
|
|
|
{ { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0) } },
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
|
|
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0) } },
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
|
|
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } },
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } },
|
|
},
|
|
.modalHeader5G = {
|
|
/* 4 idle,t1,t2,b (4 bits per setting) */
|
|
.antCtrlCommon = LE32(0x110),
|
|
/* 4 ra1l1, ra2l1, ra1l2,ra2l2,ra12 */
|
|
.antCtrlCommon2 = LE32(0x22222),
|
|
/* antCtrlChain 6 idle, t,r,rx1,rx12,b (2 bits each) */
|
|
.antCtrlChain = {
|
|
LE16(0x0), LE16(0x0), LE16(0x0),
|
|
},
|
|
/* xatten1DB 3 xatten1_db for ar9280 (0xa20c/b20c 5:0) */
|
|
.xatten1DB = {0x13, 0x19, 0x17},
|
|
|
|
/*
|
|
* xatten1Margin[ar9300_max_chains]; 3 xatten1_margin
|
|
* for merlin (0xa20c/b20c 16:12
|
|
*/
|
|
.xatten1Margin = {0x19, 0x19, 0x19},
|
|
.tempSlope = 70,
|
|
.voltSlope = 15,
|
|
/* spurChans spur channels in usual fbin coding format */
|
|
.spurChans = {0, 0, 0, 0, 0},
|
|
/* noiseFloorThreshch check if the register is per chain */
|
|
.noiseFloorThreshCh = {-1, 0, 0},
|
|
.reserved = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
|
|
.quick_drop = 0,
|
|
.xpaBiasLvl = 0,
|
|
.txFrameToDataStart = 0x0e,
|
|
.txFrameToPaOn = 0x0e,
|
|
.txClip = 3, /* 4 bits tx_clip, 4 bits dac_scale_cck */
|
|
.antennaGain = 0,
|
|
.switchSettling = 0x2d,
|
|
.adcDesiredSize = -30,
|
|
.txEndToXpaOff = 0,
|
|
.txEndToRxOn = 0x2,
|
|
.txFrameToXpaOn = 0xe,
|
|
.thresh62 = 28,
|
|
.papdRateMaskHt20 = LE32(0x0cf0e0e0),
|
|
.papdRateMaskHt40 = LE32(0x6cf0e0e0),
|
|
.futureModal = {
|
|
0, 0, 0, 0, 0, 0, 0, 0,
|
|
},
|
|
},
|
|
.base_ext2 = {
|
|
.tempSlopeLow = 72,
|
|
.tempSlopeHigh = 105,
|
|
.xatten1DBLow = {0x10, 0x14, 0x10},
|
|
.xatten1MarginLow = {0x19, 0x19 , 0x19},
|
|
.xatten1DBHigh = {0x1d, 0x20, 0x24},
|
|
.xatten1MarginHigh = {0x10, 0x10, 0x10}
|
|
},
|
|
.calFreqPier5G = {
|
|
FREQ2FBIN(5180, 0),
|
|
FREQ2FBIN(5220, 0),
|
|
FREQ2FBIN(5320, 0),
|
|
FREQ2FBIN(5400, 0),
|
|
FREQ2FBIN(5500, 0),
|
|
FREQ2FBIN(5600, 0),
|
|
FREQ2FBIN(5700, 0),
|
|
FREQ2FBIN(5785, 0)
|
|
},
|
|
.calPierData5G = {
|
|
{
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
},
|
|
{
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
},
|
|
{
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
},
|
|
|
|
},
|
|
.calTarget_freqbin_5G = {
|
|
FREQ2FBIN(5180, 0),
|
|
FREQ2FBIN(5220, 0),
|
|
FREQ2FBIN(5320, 0),
|
|
FREQ2FBIN(5400, 0),
|
|
FREQ2FBIN(5500, 0),
|
|
FREQ2FBIN(5600, 0),
|
|
FREQ2FBIN(5725, 0),
|
|
FREQ2FBIN(5825, 0)
|
|
},
|
|
.calTarget_freqbin_5GHT20 = {
|
|
FREQ2FBIN(5180, 0),
|
|
FREQ2FBIN(5220, 0),
|
|
FREQ2FBIN(5320, 0),
|
|
FREQ2FBIN(5400, 0),
|
|
FREQ2FBIN(5500, 0),
|
|
FREQ2FBIN(5600, 0),
|
|
FREQ2FBIN(5725, 0),
|
|
FREQ2FBIN(5825, 0)
|
|
},
|
|
.calTarget_freqbin_5GHT40 = {
|
|
FREQ2FBIN(5180, 0),
|
|
FREQ2FBIN(5220, 0),
|
|
FREQ2FBIN(5320, 0),
|
|
FREQ2FBIN(5400, 0),
|
|
FREQ2FBIN(5500, 0),
|
|
FREQ2FBIN(5600, 0),
|
|
FREQ2FBIN(5725, 0),
|
|
FREQ2FBIN(5825, 0)
|
|
},
|
|
.calTargetPower5G = {
|
|
/* 6-24,36,48,54 */
|
|
{ {32, 32, 28, 26} },
|
|
{ {32, 32, 28, 26} },
|
|
{ {32, 32, 28, 26} },
|
|
{ {32, 32, 26, 24} },
|
|
{ {32, 32, 26, 24} },
|
|
{ {32, 32, 24, 22} },
|
|
{ {30, 30, 24, 22} },
|
|
{ {30, 30, 24, 22} },
|
|
},
|
|
.calTargetPower5GHT20 = {
|
|
/*
|
|
* 0_8_16,1-3_9-11_17-19,
|
|
* 4,5,6,7,12,13,14,15,20,21,22,23
|
|
*/
|
|
{ {32, 32, 32, 32, 28, 26, 32, 28, 26, 24, 24, 24, 22, 22} },
|
|
{ {32, 32, 32, 32, 28, 26, 32, 28, 26, 24, 24, 24, 22, 22} },
|
|
{ {32, 32, 32, 32, 28, 26, 32, 28, 26, 24, 24, 24, 22, 22} },
|
|
{ {32, 32, 32, 32, 28, 26, 32, 26, 24, 22, 22, 22, 20, 20} },
|
|
{ {32, 32, 32, 32, 28, 26, 32, 26, 24, 22, 20, 18, 16, 16} },
|
|
{ {32, 32, 32, 32, 28, 26, 32, 24, 20, 16, 18, 16, 14, 14} },
|
|
{ {30, 30, 30, 30, 28, 26, 30, 24, 20, 16, 18, 16, 14, 14} },
|
|
{ {30, 30, 30, 30, 28, 26, 30, 24, 20, 16, 18, 16, 14, 14} },
|
|
},
|
|
.calTargetPower5GHT40 = {
|
|
/*
|
|
* 0_8_16,1-3_9-11_17-19,
|
|
* 4,5,6,7,12,13,14,15,20,21,22,23
|
|
*/
|
|
{ {32, 32, 32, 30, 28, 26, 30, 28, 26, 24, 24, 24, 22, 22} },
|
|
{ {32, 32, 32, 30, 28, 26, 30, 28, 26, 24, 24, 24, 22, 22} },
|
|
{ {32, 32, 32, 30, 28, 26, 30, 28, 26, 24, 24, 24, 22, 22} },
|
|
{ {32, 32, 32, 30, 28, 26, 30, 26, 24, 22, 22, 22, 20, 20} },
|
|
{ {32, 32, 32, 30, 28, 26, 30, 26, 24, 22, 20, 18, 16, 16} },
|
|
{ {32, 32, 32, 30, 28, 26, 30, 22, 20, 16, 18, 16, 14, 14} },
|
|
{ {30, 30, 30, 30, 28, 26, 30, 22, 20, 16, 18, 16, 14, 14} },
|
|
{ {30, 30, 30, 30, 28, 26, 30, 22, 20, 16, 18, 16, 14, 14} },
|
|
},
|
|
.ctlIndex_5G = {
|
|
0x10, 0x16, 0x18, 0x40, 0x46,
|
|
0x48, 0x30, 0x36, 0x38
|
|
},
|
|
.ctl_freqbin_5G = {
|
|
{
|
|
/* Data[0].ctledges[0].bchannel */ FREQ2FBIN(5180, 0),
|
|
/* Data[0].ctledges[1].bchannel */ FREQ2FBIN(5260, 0),
|
|
/* Data[0].ctledges[2].bchannel */ FREQ2FBIN(5280, 0),
|
|
/* Data[0].ctledges[3].bchannel */ FREQ2FBIN(5500, 0),
|
|
/* Data[0].ctledges[4].bchannel */ FREQ2FBIN(5600, 0),
|
|
/* Data[0].ctledges[5].bchannel */ FREQ2FBIN(5700, 0),
|
|
/* Data[0].ctledges[6].bchannel */ FREQ2FBIN(5745, 0),
|
|
/* Data[0].ctledges[7].bchannel */ FREQ2FBIN(5825, 0)
|
|
},
|
|
{
|
|
/* Data[1].ctledges[0].bchannel */ FREQ2FBIN(5180, 0),
|
|
/* Data[1].ctledges[1].bchannel */ FREQ2FBIN(5260, 0),
|
|
/* Data[1].ctledges[2].bchannel */ FREQ2FBIN(5280, 0),
|
|
/* Data[1].ctledges[3].bchannel */ FREQ2FBIN(5500, 0),
|
|
/* Data[1].ctledges[4].bchannel */ FREQ2FBIN(5520, 0),
|
|
/* Data[1].ctledges[5].bchannel */ FREQ2FBIN(5700, 0),
|
|
/* Data[1].ctledges[6].bchannel */ FREQ2FBIN(5745, 0),
|
|
/* Data[1].ctledges[7].bchannel */ FREQ2FBIN(5825, 0)
|
|
},
|
|
|
|
{
|
|
/* Data[2].ctledges[0].bchannel */ FREQ2FBIN(5190, 0),
|
|
/* Data[2].ctledges[1].bchannel */ FREQ2FBIN(5230, 0),
|
|
/* Data[2].ctledges[2].bchannel */ FREQ2FBIN(5270, 0),
|
|
/* Data[2].ctledges[3].bchannel */ FREQ2FBIN(5310, 0),
|
|
/* Data[2].ctledges[4].bchannel */ FREQ2FBIN(5510, 0),
|
|
/* Data[2].ctledges[5].bchannel */ FREQ2FBIN(5550, 0),
|
|
/* Data[2].ctledges[6].bchannel */ FREQ2FBIN(5670, 0),
|
|
/* Data[2].ctledges[7].bchannel */ FREQ2FBIN(5755, 0)
|
|
},
|
|
|
|
{
|
|
/* Data[3].ctledges[0].bchannel */ FREQ2FBIN(5180, 0),
|
|
/* Data[3].ctledges[1].bchannel */ FREQ2FBIN(5200, 0),
|
|
/* Data[3].ctledges[2].bchannel */ FREQ2FBIN(5260, 0),
|
|
/* Data[3].ctledges[3].bchannel */ FREQ2FBIN(5320, 0),
|
|
/* Data[3].ctledges[4].bchannel */ FREQ2FBIN(5500, 0),
|
|
/* Data[3].ctledges[5].bchannel */ FREQ2FBIN(5700, 0),
|
|
/* Data[3].ctledges[6].bchannel */ 0xFF,
|
|
/* Data[3].ctledges[7].bchannel */ 0xFF,
|
|
},
|
|
|
|
{
|
|
/* Data[4].ctledges[0].bchannel */ FREQ2FBIN(5180, 0),
|
|
/* Data[4].ctledges[1].bchannel */ FREQ2FBIN(5260, 0),
|
|
/* Data[4].ctledges[2].bchannel */ FREQ2FBIN(5500, 0),
|
|
/* Data[4].ctledges[3].bchannel */ FREQ2FBIN(5700, 0),
|
|
/* Data[4].ctledges[4].bchannel */ 0xFF,
|
|
/* Data[4].ctledges[5].bchannel */ 0xFF,
|
|
/* Data[4].ctledges[6].bchannel */ 0xFF,
|
|
/* Data[4].ctledges[7].bchannel */ 0xFF,
|
|
},
|
|
|
|
{
|
|
/* Data[5].ctledges[0].bchannel */ FREQ2FBIN(5190, 0),
|
|
/* Data[5].ctledges[1].bchannel */ FREQ2FBIN(5270, 0),
|
|
/* Data[5].ctledges[2].bchannel */ FREQ2FBIN(5310, 0),
|
|
/* Data[5].ctledges[3].bchannel */ FREQ2FBIN(5510, 0),
|
|
/* Data[5].ctledges[4].bchannel */ FREQ2FBIN(5590, 0),
|
|
/* Data[5].ctledges[5].bchannel */ FREQ2FBIN(5670, 0),
|
|
/* Data[5].ctledges[6].bchannel */ 0xFF,
|
|
/* Data[5].ctledges[7].bchannel */ 0xFF
|
|
},
|
|
|
|
{
|
|
/* Data[6].ctledges[0].bchannel */ FREQ2FBIN(5180, 0),
|
|
/* Data[6].ctledges[1].bchannel */ FREQ2FBIN(5200, 0),
|
|
/* Data[6].ctledges[2].bchannel */ FREQ2FBIN(5220, 0),
|
|
/* Data[6].ctledges[3].bchannel */ FREQ2FBIN(5260, 0),
|
|
/* Data[6].ctledges[4].bchannel */ FREQ2FBIN(5500, 0),
|
|
/* Data[6].ctledges[5].bchannel */ FREQ2FBIN(5600, 0),
|
|
/* Data[6].ctledges[6].bchannel */ FREQ2FBIN(5700, 0),
|
|
/* Data[6].ctledges[7].bchannel */ FREQ2FBIN(5745, 0)
|
|
},
|
|
|
|
{
|
|
/* Data[7].ctledges[0].bchannel */ FREQ2FBIN(5180, 0),
|
|
/* Data[7].ctledges[1].bchannel */ FREQ2FBIN(5260, 0),
|
|
/* Data[7].ctledges[2].bchannel */ FREQ2FBIN(5320, 0),
|
|
/* Data[7].ctledges[3].bchannel */ FREQ2FBIN(5500, 0),
|
|
/* Data[7].ctledges[4].bchannel */ FREQ2FBIN(5560, 0),
|
|
/* Data[7].ctledges[5].bchannel */ FREQ2FBIN(5700, 0),
|
|
/* Data[7].ctledges[6].bchannel */ FREQ2FBIN(5745, 0),
|
|
/* Data[7].ctledges[7].bchannel */ FREQ2FBIN(5825, 0)
|
|
},
|
|
|
|
{
|
|
/* Data[8].ctledges[0].bchannel */ FREQ2FBIN(5190, 0),
|
|
/* Data[8].ctledges[1].bchannel */ FREQ2FBIN(5230, 0),
|
|
/* Data[8].ctledges[2].bchannel */ FREQ2FBIN(5270, 0),
|
|
/* Data[8].ctledges[3].bchannel */ FREQ2FBIN(5510, 0),
|
|
/* Data[8].ctledges[4].bchannel */ FREQ2FBIN(5550, 0),
|
|
/* Data[8].ctledges[5].bchannel */ FREQ2FBIN(5670, 0),
|
|
/* Data[8].ctledges[6].bchannel */ FREQ2FBIN(5755, 0),
|
|
/* Data[8].ctledges[7].bchannel */ FREQ2FBIN(5795, 0)
|
|
}
|
|
},
|
|
.ctlPowerData_5G = {
|
|
{
|
|
{
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 1),
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0),
|
|
CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
|
|
CTL(60, 0), CTL(60, 0), CTL(60, 0), CTL(60, 0),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
|
|
CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1),
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 1), CTL(60, 0), CTL(60, 1), CTL(60, 1),
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1),
|
|
}
|
|
},
|
|
}
|
|
};
|
|
|
|
static const struct ar9300_eeprom ar9300_h116 = {
|
|
.eepromVersion = 2,
|
|
.templateVersion = 4,
|
|
.macAddr = {0x00, 0x03, 0x7f, 0x0, 0x0, 0x0},
|
|
.custData = {"h116-041-f0000"},
|
|
.baseEepHeader = {
|
|
.regDmn = { LE16(0), LE16(0x1f) },
|
|
.txrxMask = 0x33, /* 4 bits tx and 4 bits rx */
|
|
.opCapFlags = {
|
|
.opFlags = AR5416_OPFLAGS_11G | AR5416_OPFLAGS_11A,
|
|
.eepMisc = 0,
|
|
},
|
|
.rfSilent = 0,
|
|
.blueToothOptions = 0,
|
|
.deviceCap = 0,
|
|
.deviceType = 5, /* takes lower byte in eeprom location */
|
|
.pwrTableOffset = AR9300_PWR_TABLE_OFFSET,
|
|
.params_for_tuning_caps = {0, 0},
|
|
.featureEnable = 0x0d,
|
|
/*
|
|
* bit0 - enable tx temp comp - disabled
|
|
* bit1 - enable tx volt comp - disabled
|
|
* bit2 - enable fastClock - enabled
|
|
* bit3 - enable doubling - enabled
|
|
* bit4 - enable internal regulator - disabled
|
|
* bit5 - enable pa predistortion - disabled
|
|
*/
|
|
.miscConfiguration = 0, /* bit0 - turn down drivestrength */
|
|
.eepromWriteEnableGpio = 6,
|
|
.wlanDisableGpio = 0,
|
|
.wlanLedGpio = 8,
|
|
.rxBandSelectGpio = 0xff,
|
|
.txrxgain = 0x10,
|
|
.swreg = 0,
|
|
},
|
|
.modalHeader2G = {
|
|
/* ar9300_modal_eep_header 2g */
|
|
/* 4 idle,t1,t2,b(4 bits per setting) */
|
|
.antCtrlCommon = LE32(0x110),
|
|
/* 4 ra1l1, ra2l1, ra1l2, ra2l2, ra12 */
|
|
.antCtrlCommon2 = LE32(0x44444),
|
|
|
|
/*
|
|
* antCtrlChain[AR9300_MAX_CHAINS]; 6 idle, t, r,
|
|
* rx1, rx12, b (2 bits each)
|
|
*/
|
|
.antCtrlChain = { LE16(0x10), LE16(0x10), LE16(0x10) },
|
|
|
|
/*
|
|
* xatten1DB[AR9300_MAX_CHAINS]; 3 xatten1_db
|
|
* for ar9280 (0xa20c/b20c 5:0)
|
|
*/
|
|
.xatten1DB = {0x1f, 0x1f, 0x1f},
|
|
|
|
/*
|
|
* xatten1Margin[AR9300_MAX_CHAINS]; 3 xatten1_margin
|
|
* for ar9280 (0xa20c/b20c 16:12
|
|
*/
|
|
.xatten1Margin = {0x12, 0x12, 0x12},
|
|
.tempSlope = 25,
|
|
.voltSlope = 0,
|
|
|
|
/*
|
|
* spurChans[OSPREY_EEPROM_MODAL_SPURS]; spur
|
|
* channels in usual fbin coding format
|
|
*/
|
|
.spurChans = {FREQ2FBIN(2464, 1), 0, 0, 0, 0},
|
|
|
|
/*
|
|
* noiseFloorThreshCh[AR9300_MAX_CHAINS]; 3 Check
|
|
* if the register is per chain
|
|
*/
|
|
.noiseFloorThreshCh = {-1, 0, 0},
|
|
.reserved = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
|
|
.quick_drop = 0,
|
|
.xpaBiasLvl = 0,
|
|
.txFrameToDataStart = 0x0e,
|
|
.txFrameToPaOn = 0x0e,
|
|
.txClip = 3, /* 4 bits tx_clip, 4 bits dac_scale_cck */
|
|
.antennaGain = 0,
|
|
.switchSettling = 0x2c,
|
|
.adcDesiredSize = -30,
|
|
.txEndToXpaOff = 0,
|
|
.txEndToRxOn = 0x2,
|
|
.txFrameToXpaOn = 0xe,
|
|
.thresh62 = 28,
|
|
.papdRateMaskHt20 = LE32(0x0c80C080),
|
|
.papdRateMaskHt40 = LE32(0x0080C080),
|
|
.futureModal = {
|
|
0, 0, 0, 0, 0, 0, 0, 0,
|
|
},
|
|
},
|
|
.base_ext1 = {
|
|
.ant_div_control = 0,
|
|
.future = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
|
|
},
|
|
.calFreqPier2G = {
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2437, 1),
|
|
FREQ2FBIN(2462, 1),
|
|
},
|
|
/* ar9300_cal_data_per_freq_op_loop 2g */
|
|
.calPierData2G = {
|
|
{ {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} },
|
|
{ {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} },
|
|
{ {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} },
|
|
},
|
|
.calTarget_freqbin_Cck = {
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2472, 1),
|
|
},
|
|
.calTarget_freqbin_2G = {
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2437, 1),
|
|
FREQ2FBIN(2472, 1)
|
|
},
|
|
.calTarget_freqbin_2GHT20 = {
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2437, 1),
|
|
FREQ2FBIN(2472, 1)
|
|
},
|
|
.calTarget_freqbin_2GHT40 = {
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2437, 1),
|
|
FREQ2FBIN(2472, 1)
|
|
},
|
|
.calTargetPowerCck = {
|
|
/* 1L-5L,5S,11L,11S */
|
|
{ {34, 34, 34, 34} },
|
|
{ {34, 34, 34, 34} },
|
|
},
|
|
.calTargetPower2G = {
|
|
/* 6-24,36,48,54 */
|
|
{ {34, 34, 32, 32} },
|
|
{ {34, 34, 32, 32} },
|
|
{ {34, 34, 32, 32} },
|
|
},
|
|
.calTargetPower2GHT20 = {
|
|
{ {32, 32, 32, 32, 32, 30, 32, 32, 30, 28, 0, 0, 0, 0} },
|
|
{ {32, 32, 32, 32, 32, 30, 32, 32, 30, 28, 0, 0, 0, 0} },
|
|
{ {32, 32, 32, 32, 32, 30, 32, 32, 30, 28, 0, 0, 0, 0} },
|
|
},
|
|
.calTargetPower2GHT40 = {
|
|
{ {30, 30, 30, 30, 30, 28, 30, 30, 28, 26, 0, 0, 0, 0} },
|
|
{ {30, 30, 30, 30, 30, 28, 30, 30, 28, 26, 0, 0, 0, 0} },
|
|
{ {30, 30, 30, 30, 30, 28, 30, 30, 28, 26, 0, 0, 0, 0} },
|
|
},
|
|
.ctlIndex_2G = {
|
|
0x11, 0x12, 0x15, 0x17, 0x41, 0x42,
|
|
0x45, 0x47, 0x31, 0x32, 0x35, 0x37,
|
|
},
|
|
.ctl_freqbin_2G = {
|
|
{
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2417, 1),
|
|
FREQ2FBIN(2457, 1),
|
|
FREQ2FBIN(2462, 1)
|
|
},
|
|
{
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2417, 1),
|
|
FREQ2FBIN(2462, 1),
|
|
0xFF,
|
|
},
|
|
|
|
{
|
|
FREQ2FBIN(2412, 1),
|
|
FREQ2FBIN(2417, 1),
|
|
FREQ2FBIN(2462, 1),
|
|
0xFF,
|
|
},
|
|
{
|
|
FREQ2FBIN(2422, 1),
|
|
FREQ2FBIN(2427, 1),
|
|
FREQ2FBIN(2447, 1),
|
|
FREQ2FBIN(2452, 1)
|
|
},
|
|
|
|
{
|
|
/* Data[4].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
|
|
/* Data[4].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
|
|
/* Data[4].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
|
|
/* Data[4].ctlEdges[3].bChannel */ FREQ2FBIN(2484, 1),
|
|
},
|
|
|
|
{
|
|
/* Data[5].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
|
|
/* Data[5].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
|
|
/* Data[5].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
|
|
0,
|
|
},
|
|
|
|
{
|
|
/* Data[6].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
|
|
/* Data[6].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
|
|
FREQ2FBIN(2472, 1),
|
|
0,
|
|
},
|
|
|
|
{
|
|
/* Data[7].ctlEdges[0].bChannel */ FREQ2FBIN(2422, 1),
|
|
/* Data[7].ctlEdges[1].bChannel */ FREQ2FBIN(2427, 1),
|
|
/* Data[7].ctlEdges[2].bChannel */ FREQ2FBIN(2447, 1),
|
|
/* Data[7].ctlEdges[3].bChannel */ FREQ2FBIN(2462, 1),
|
|
},
|
|
|
|
{
|
|
/* Data[8].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
|
|
/* Data[8].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
|
|
/* Data[8].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
|
|
},
|
|
|
|
{
|
|
/* Data[9].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
|
|
/* Data[9].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
|
|
/* Data[9].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
|
|
0
|
|
},
|
|
|
|
{
|
|
/* Data[10].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
|
|
/* Data[10].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
|
|
/* Data[10].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
|
|
0
|
|
},
|
|
|
|
{
|
|
/* Data[11].ctlEdges[0].bChannel */ FREQ2FBIN(2422, 1),
|
|
/* Data[11].ctlEdges[1].bChannel */ FREQ2FBIN(2427, 1),
|
|
/* Data[11].ctlEdges[2].bChannel */ FREQ2FBIN(2447, 1),
|
|
/* Data[11].ctlEdges[3].bChannel */ FREQ2FBIN(2462, 1),
|
|
}
|
|
},
|
|
.ctlPowerData_2G = {
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
|
|
{ { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } },
|
|
|
|
{ { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0) } },
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
|
|
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0) } },
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
|
|
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } },
|
|
{ { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } },
|
|
},
|
|
.modalHeader5G = {
|
|
/* 4 idle,t1,t2,b (4 bits per setting) */
|
|
.antCtrlCommon = LE32(0x220),
|
|
/* 4 ra1l1, ra2l1, ra1l2,ra2l2,ra12 */
|
|
.antCtrlCommon2 = LE32(0x44444),
|
|
/* antCtrlChain 6 idle, t,r,rx1,rx12,b (2 bits each) */
|
|
.antCtrlChain = {
|
|
LE16(0x150), LE16(0x150), LE16(0x150),
|
|
},
|
|
/* xatten1DB 3 xatten1_db for AR9280 (0xa20c/b20c 5:0) */
|
|
.xatten1DB = {0x19, 0x19, 0x19},
|
|
|
|
/*
|
|
* xatten1Margin[AR9300_MAX_CHAINS]; 3 xatten1_margin
|
|
* for merlin (0xa20c/b20c 16:12
|
|
*/
|
|
.xatten1Margin = {0x14, 0x14, 0x14},
|
|
.tempSlope = 70,
|
|
.voltSlope = 0,
|
|
/* spurChans spur channels in usual fbin coding format */
|
|
.spurChans = {0, 0, 0, 0, 0},
|
|
/* noiseFloorThreshCh Check if the register is per chain */
|
|
.noiseFloorThreshCh = {-1, 0, 0},
|
|
.reserved = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
|
|
.quick_drop = 0,
|
|
.xpaBiasLvl = 0,
|
|
.txFrameToDataStart = 0x0e,
|
|
.txFrameToPaOn = 0x0e,
|
|
.txClip = 3, /* 4 bits tx_clip, 4 bits dac_scale_cck */
|
|
.antennaGain = 0,
|
|
.switchSettling = 0x2d,
|
|
.adcDesiredSize = -30,
|
|
.txEndToXpaOff = 0,
|
|
.txEndToRxOn = 0x2,
|
|
.txFrameToXpaOn = 0xe,
|
|
.thresh62 = 28,
|
|
.papdRateMaskHt20 = LE32(0x0cf0e0e0),
|
|
.papdRateMaskHt40 = LE32(0x6cf0e0e0),
|
|
.futureModal = {
|
|
0, 0, 0, 0, 0, 0, 0, 0,
|
|
},
|
|
},
|
|
.base_ext2 = {
|
|
.tempSlopeLow = 35,
|
|
.tempSlopeHigh = 50,
|
|
.xatten1DBLow = {0, 0, 0},
|
|
.xatten1MarginLow = {0, 0, 0},
|
|
.xatten1DBHigh = {0, 0, 0},
|
|
.xatten1MarginHigh = {0, 0, 0}
|
|
},
|
|
.calFreqPier5G = {
|
|
FREQ2FBIN(5160, 0),
|
|
FREQ2FBIN(5220, 0),
|
|
FREQ2FBIN(5320, 0),
|
|
FREQ2FBIN(5400, 0),
|
|
FREQ2FBIN(5500, 0),
|
|
FREQ2FBIN(5600, 0),
|
|
FREQ2FBIN(5700, 0),
|
|
FREQ2FBIN(5785, 0)
|
|
},
|
|
.calPierData5G = {
|
|
{
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
},
|
|
{
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
},
|
|
{
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
{0, 0, 0, 0, 0},
|
|
},
|
|
|
|
},
|
|
.calTarget_freqbin_5G = {
|
|
FREQ2FBIN(5180, 0),
|
|
FREQ2FBIN(5240, 0),
|
|
FREQ2FBIN(5320, 0),
|
|
FREQ2FBIN(5400, 0),
|
|
FREQ2FBIN(5500, 0),
|
|
FREQ2FBIN(5600, 0),
|
|
FREQ2FBIN(5700, 0),
|
|
FREQ2FBIN(5825, 0)
|
|
},
|
|
.calTarget_freqbin_5GHT20 = {
|
|
FREQ2FBIN(5180, 0),
|
|
FREQ2FBIN(5240, 0),
|
|
FREQ2FBIN(5320, 0),
|
|
FREQ2FBIN(5400, 0),
|
|
FREQ2FBIN(5500, 0),
|
|
FREQ2FBIN(5700, 0),
|
|
FREQ2FBIN(5745, 0),
|
|
FREQ2FBIN(5825, 0)
|
|
},
|
|
.calTarget_freqbin_5GHT40 = {
|
|
FREQ2FBIN(5180, 0),
|
|
FREQ2FBIN(5240, 0),
|
|
FREQ2FBIN(5320, 0),
|
|
FREQ2FBIN(5400, 0),
|
|
FREQ2FBIN(5500, 0),
|
|
FREQ2FBIN(5700, 0),
|
|
FREQ2FBIN(5745, 0),
|
|
FREQ2FBIN(5825, 0)
|
|
},
|
|
.calTargetPower5G = {
|
|
/* 6-24,36,48,54 */
|
|
{ {30, 30, 28, 24} },
|
|
{ {30, 30, 28, 24} },
|
|
{ {30, 30, 28, 24} },
|
|
{ {30, 30, 28, 24} },
|
|
{ {30, 30, 28, 24} },
|
|
{ {30, 30, 28, 24} },
|
|
{ {30, 30, 28, 24} },
|
|
{ {30, 30, 28, 24} },
|
|
},
|
|
.calTargetPower5GHT20 = {
|
|
/*
|
|
* 0_8_16,1-3_9-11_17-19,
|
|
* 4,5,6,7,12,13,14,15,20,21,22,23
|
|
*/
|
|
{ {30, 30, 30, 28, 24, 20, 30, 28, 24, 20, 0, 0, 0, 0} },
|
|
{ {30, 30, 30, 28, 24, 20, 30, 28, 24, 20, 0, 0, 0, 0} },
|
|
{ {30, 30, 30, 26, 22, 18, 30, 26, 22, 18, 0, 0, 0, 0} },
|
|
{ {30, 30, 30, 26, 22, 18, 30, 26, 22, 18, 0, 0, 0, 0} },
|
|
{ {30, 30, 30, 24, 20, 16, 30, 24, 20, 16, 0, 0, 0, 0} },
|
|
{ {30, 30, 30, 24, 20, 16, 30, 24, 20, 16, 0, 0, 0, 0} },
|
|
{ {30, 30, 30, 22, 18, 14, 30, 22, 18, 14, 0, 0, 0, 0} },
|
|
{ {30, 30, 30, 22, 18, 14, 30, 22, 18, 14, 0, 0, 0, 0} },
|
|
},
|
|
.calTargetPower5GHT40 = {
|
|
/*
|
|
* 0_8_16,1-3_9-11_17-19,
|
|
* 4,5,6,7,12,13,14,15,20,21,22,23
|
|
*/
|
|
{ {28, 28, 28, 26, 22, 18, 28, 26, 22, 18, 0, 0, 0, 0} },
|
|
{ {28, 28, 28, 26, 22, 18, 28, 26, 22, 18, 0, 0, 0, 0} },
|
|
{ {28, 28, 28, 24, 20, 16, 28, 24, 20, 16, 0, 0, 0, 0} },
|
|
{ {28, 28, 28, 24, 20, 16, 28, 24, 20, 16, 0, 0, 0, 0} },
|
|
{ {28, 28, 28, 22, 18, 14, 28, 22, 18, 14, 0, 0, 0, 0} },
|
|
{ {28, 28, 28, 22, 18, 14, 28, 22, 18, 14, 0, 0, 0, 0} },
|
|
{ {28, 28, 28, 20, 16, 12, 28, 20, 16, 12, 0, 0, 0, 0} },
|
|
{ {28, 28, 28, 20, 16, 12, 28, 20, 16, 12, 0, 0, 0, 0} },
|
|
},
|
|
.ctlIndex_5G = {
|
|
0x10, 0x16, 0x18, 0x40, 0x46,
|
|
0x48, 0x30, 0x36, 0x38
|
|
},
|
|
.ctl_freqbin_5G = {
|
|
{
|
|
/* Data[0].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
|
|
/* Data[0].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0),
|
|
/* Data[0].ctlEdges[2].bChannel */ FREQ2FBIN(5280, 0),
|
|
/* Data[0].ctlEdges[3].bChannel */ FREQ2FBIN(5500, 0),
|
|
/* Data[0].ctlEdges[4].bChannel */ FREQ2FBIN(5600, 0),
|
|
/* Data[0].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0),
|
|
/* Data[0].ctlEdges[6].bChannel */ FREQ2FBIN(5745, 0),
|
|
/* Data[0].ctlEdges[7].bChannel */ FREQ2FBIN(5825, 0)
|
|
},
|
|
{
|
|
/* Data[1].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
|
|
/* Data[1].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0),
|
|
/* Data[1].ctlEdges[2].bChannel */ FREQ2FBIN(5280, 0),
|
|
/* Data[1].ctlEdges[3].bChannel */ FREQ2FBIN(5500, 0),
|
|
/* Data[1].ctlEdges[4].bChannel */ FREQ2FBIN(5520, 0),
|
|
/* Data[1].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0),
|
|
/* Data[1].ctlEdges[6].bChannel */ FREQ2FBIN(5745, 0),
|
|
/* Data[1].ctlEdges[7].bChannel */ FREQ2FBIN(5825, 0)
|
|
},
|
|
|
|
{
|
|
/* Data[2].ctlEdges[0].bChannel */ FREQ2FBIN(5190, 0),
|
|
/* Data[2].ctlEdges[1].bChannel */ FREQ2FBIN(5230, 0),
|
|
/* Data[2].ctlEdges[2].bChannel */ FREQ2FBIN(5270, 0),
|
|
/* Data[2].ctlEdges[3].bChannel */ FREQ2FBIN(5310, 0),
|
|
/* Data[2].ctlEdges[4].bChannel */ FREQ2FBIN(5510, 0),
|
|
/* Data[2].ctlEdges[5].bChannel */ FREQ2FBIN(5550, 0),
|
|
/* Data[2].ctlEdges[6].bChannel */ FREQ2FBIN(5670, 0),
|
|
/* Data[2].ctlEdges[7].bChannel */ FREQ2FBIN(5755, 0)
|
|
},
|
|
|
|
{
|
|
/* Data[3].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
|
|
/* Data[3].ctlEdges[1].bChannel */ FREQ2FBIN(5200, 0),
|
|
/* Data[3].ctlEdges[2].bChannel */ FREQ2FBIN(5260, 0),
|
|
/* Data[3].ctlEdges[3].bChannel */ FREQ2FBIN(5320, 0),
|
|
/* Data[3].ctlEdges[4].bChannel */ FREQ2FBIN(5500, 0),
|
|
/* Data[3].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0),
|
|
/* Data[3].ctlEdges[6].bChannel */ 0xFF,
|
|
/* Data[3].ctlEdges[7].bChannel */ 0xFF,
|
|
},
|
|
|
|
{
|
|
/* Data[4].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
|
|
/* Data[4].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0),
|
|
/* Data[4].ctlEdges[2].bChannel */ FREQ2FBIN(5500, 0),
|
|
/* Data[4].ctlEdges[3].bChannel */ FREQ2FBIN(5700, 0),
|
|
/* Data[4].ctlEdges[4].bChannel */ 0xFF,
|
|
/* Data[4].ctlEdges[5].bChannel */ 0xFF,
|
|
/* Data[4].ctlEdges[6].bChannel */ 0xFF,
|
|
/* Data[4].ctlEdges[7].bChannel */ 0xFF,
|
|
},
|
|
|
|
{
|
|
/* Data[5].ctlEdges[0].bChannel */ FREQ2FBIN(5190, 0),
|
|
/* Data[5].ctlEdges[1].bChannel */ FREQ2FBIN(5270, 0),
|
|
/* Data[5].ctlEdges[2].bChannel */ FREQ2FBIN(5310, 0),
|
|
/* Data[5].ctlEdges[3].bChannel */ FREQ2FBIN(5510, 0),
|
|
/* Data[5].ctlEdges[4].bChannel */ FREQ2FBIN(5590, 0),
|
|
/* Data[5].ctlEdges[5].bChannel */ FREQ2FBIN(5670, 0),
|
|
/* Data[5].ctlEdges[6].bChannel */ 0xFF,
|
|
/* Data[5].ctlEdges[7].bChannel */ 0xFF
|
|
},
|
|
|
|
{
|
|
/* Data[6].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
|
|
/* Data[6].ctlEdges[1].bChannel */ FREQ2FBIN(5200, 0),
|
|
/* Data[6].ctlEdges[2].bChannel */ FREQ2FBIN(5220, 0),
|
|
/* Data[6].ctlEdges[3].bChannel */ FREQ2FBIN(5260, 0),
|
|
/* Data[6].ctlEdges[4].bChannel */ FREQ2FBIN(5500, 0),
|
|
/* Data[6].ctlEdges[5].bChannel */ FREQ2FBIN(5600, 0),
|
|
/* Data[6].ctlEdges[6].bChannel */ FREQ2FBIN(5700, 0),
|
|
/* Data[6].ctlEdges[7].bChannel */ FREQ2FBIN(5745, 0)
|
|
},
|
|
|
|
{
|
|
/* Data[7].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
|
|
/* Data[7].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0),
|
|
/* Data[7].ctlEdges[2].bChannel */ FREQ2FBIN(5320, 0),
|
|
/* Data[7].ctlEdges[3].bChannel */ FREQ2FBIN(5500, 0),
|
|
/* Data[7].ctlEdges[4].bChannel */ FREQ2FBIN(5560, 0),
|
|
/* Data[7].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0),
|
|
/* Data[7].ctlEdges[6].bChannel */ FREQ2FBIN(5745, 0),
|
|
/* Data[7].ctlEdges[7].bChannel */ FREQ2FBIN(5825, 0)
|
|
},
|
|
|
|
{
|
|
/* Data[8].ctlEdges[0].bChannel */ FREQ2FBIN(5190, 0),
|
|
/* Data[8].ctlEdges[1].bChannel */ FREQ2FBIN(5230, 0),
|
|
/* Data[8].ctlEdges[2].bChannel */ FREQ2FBIN(5270, 0),
|
|
/* Data[8].ctlEdges[3].bChannel */ FREQ2FBIN(5510, 0),
|
|
/* Data[8].ctlEdges[4].bChannel */ FREQ2FBIN(5550, 0),
|
|
/* Data[8].ctlEdges[5].bChannel */ FREQ2FBIN(5670, 0),
|
|
/* Data[8].ctlEdges[6].bChannel */ FREQ2FBIN(5755, 0),
|
|
/* Data[8].ctlEdges[7].bChannel */ FREQ2FBIN(5795, 0)
|
|
}
|
|
},
|
|
.ctlPowerData_5G = {
|
|
{
|
|
{
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 1),
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0),
|
|
CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
|
|
CTL(60, 0), CTL(60, 0), CTL(60, 0), CTL(60, 0),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
|
|
CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1),
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
|
|
}
|
|
},
|
|
{
|
|
{
|
|
CTL(60, 1), CTL(60, 0), CTL(60, 1), CTL(60, 1),
|
|
CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1),
|
|
}
|
|
},
|
|
}
|
|
};
|
|
|
|
|
|
static const struct ar9300_eeprom *ar9300_eep_templates[] = {
|
|
&ar9300_default,
|
|
&ar9300_x112,
|
|
&ar9300_h116,
|
|
&ar9300_h112,
|
|
&ar9300_x113,
|
|
};
|
|
|
|
static const struct ar9300_eeprom *ar9003_eeprom_struct_find_by_id(int id)
|
|
{
|
|
#define N_LOOP (sizeof(ar9300_eep_templates) / sizeof(ar9300_eep_templates[0]))
|
|
int it;
|
|
|
|
for (it = 0; it < N_LOOP; it++)
|
|
if (ar9300_eep_templates[it]->templateVersion == id)
|
|
return ar9300_eep_templates[it];
|
|
return NULL;
|
|
#undef N_LOOP
|
|
}
|
|
|
|
static int ath9k_hw_ar9300_check_eeprom(struct ath_hw *ah)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int interpolate(int x, int xa, int xb, int ya, int yb)
|
|
{
|
|
int bf, factor, plus;
|
|
|
|
bf = 2 * (yb - ya) * (x - xa) / (xb - xa);
|
|
factor = bf / 2;
|
|
plus = bf % 2;
|
|
return ya + factor + plus;
|
|
}
|
|
|
|
static u32 ath9k_hw_ar9300_get_eeprom(struct ath_hw *ah,
|
|
enum eeprom_param param)
|
|
{
|
|
struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
|
|
struct ar9300_base_eep_hdr *pBase = &eep->baseEepHeader;
|
|
|
|
switch (param) {
|
|
case EEP_MAC_LSW:
|
|
return get_unaligned_be16(eep->macAddr);
|
|
case EEP_MAC_MID:
|
|
return get_unaligned_be16(eep->macAddr + 2);
|
|
case EEP_MAC_MSW:
|
|
return get_unaligned_be16(eep->macAddr + 4);
|
|
case EEP_REG_0:
|
|
return le16_to_cpu(pBase->regDmn[0]);
|
|
case EEP_OP_CAP:
|
|
return pBase->deviceCap;
|
|
case EEP_OP_MODE:
|
|
return pBase->opCapFlags.opFlags;
|
|
case EEP_RF_SILENT:
|
|
return pBase->rfSilent;
|
|
case EEP_TX_MASK:
|
|
return (pBase->txrxMask >> 4) & 0xf;
|
|
case EEP_RX_MASK:
|
|
return pBase->txrxMask & 0xf;
|
|
case EEP_DRIVE_STRENGTH:
|
|
#define AR9300_EEP_BASE_DRIV_STRENGTH 0x1
|
|
return pBase->miscConfiguration & AR9300_EEP_BASE_DRIV_STRENGTH;
|
|
case EEP_INTERNAL_REGULATOR:
|
|
/* Bit 4 is internal regulator flag */
|
|
return (pBase->featureEnable & 0x10) >> 4;
|
|
case EEP_SWREG:
|
|
return le32_to_cpu(pBase->swreg);
|
|
case EEP_PAPRD:
|
|
return !!(pBase->featureEnable & BIT(5));
|
|
case EEP_CHAIN_MASK_REDUCE:
|
|
return (pBase->miscConfiguration >> 0x3) & 0x1;
|
|
case EEP_ANT_DIV_CTL1:
|
|
return eep->base_ext1.ant_div_control;
|
|
case EEP_ANTENNA_GAIN_5G:
|
|
return eep->modalHeader5G.antennaGain;
|
|
case EEP_ANTENNA_GAIN_2G:
|
|
return eep->modalHeader2G.antennaGain;
|
|
case EEP_QUICK_DROP:
|
|
return pBase->miscConfiguration & BIT(1);
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static bool ar9300_eeprom_read_byte(struct ath_common *common, int address,
|
|
u8 *buffer)
|
|
{
|
|
u16 val;
|
|
|
|
if (unlikely(!ath9k_hw_nvram_read(common, address / 2, &val)))
|
|
return false;
|
|
|
|
*buffer = (val >> (8 * (address % 2))) & 0xff;
|
|
return true;
|
|
}
|
|
|
|
static bool ar9300_eeprom_read_word(struct ath_common *common, int address,
|
|
u8 *buffer)
|
|
{
|
|
u16 val;
|
|
|
|
if (unlikely(!ath9k_hw_nvram_read(common, address / 2, &val)))
|
|
return false;
|
|
|
|
buffer[0] = val >> 8;
|
|
buffer[1] = val & 0xff;
|
|
|
|
return true;
|
|
}
|
|
|
|
static bool ar9300_read_eeprom(struct ath_hw *ah, int address, u8 *buffer,
|
|
int count)
|
|
{
|
|
struct ath_common *common = ath9k_hw_common(ah);
|
|
int i;
|
|
|
|
if ((address < 0) || ((address + count) / 2 > AR9300_EEPROM_SIZE - 1)) {
|
|
ath_dbg(common, EEPROM, "eeprom address not in range\n");
|
|
return false;
|
|
}
|
|
|
|
/*
|
|
* Since we're reading the bytes in reverse order from a little-endian
|
|
* word stream, an even address means we only use the lower half of
|
|
* the 16-bit word at that address
|
|
*/
|
|
if (address % 2 == 0) {
|
|
if (!ar9300_eeprom_read_byte(common, address--, buffer++))
|
|
goto error;
|
|
|
|
count--;
|
|
}
|
|
|
|
for (i = 0; i < count / 2; i++) {
|
|
if (!ar9300_eeprom_read_word(common, address, buffer))
|
|
goto error;
|
|
|
|
address -= 2;
|
|
buffer += 2;
|
|
}
|
|
|
|
if (count % 2)
|
|
if (!ar9300_eeprom_read_byte(common, address, buffer))
|
|
goto error;
|
|
|
|
return true;
|
|
|
|
error:
|
|
ath_dbg(common, EEPROM, "unable to read eeprom region at offset %d\n",
|
|
address);
|
|
return false;
|
|
}
|
|
|
|
static bool ar9300_otp_read_word(struct ath_hw *ah, int addr, u32 *data)
|
|
{
|
|
REG_READ(ah, AR9300_OTP_BASE + (4 * addr));
|
|
|
|
if (!ath9k_hw_wait(ah, AR9300_OTP_STATUS, AR9300_OTP_STATUS_TYPE,
|
|
AR9300_OTP_STATUS_VALID, 1000))
|
|
return false;
|
|
|
|
*data = REG_READ(ah, AR9300_OTP_READ_DATA);
|
|
return true;
|
|
}
|
|
|
|
static bool ar9300_read_otp(struct ath_hw *ah, int address, u8 *buffer,
|
|
int count)
|
|
{
|
|
u32 data;
|
|
int i;
|
|
|
|
for (i = 0; i < count; i++) {
|
|
int offset = 8 * ((address - i) % 4);
|
|
if (!ar9300_otp_read_word(ah, (address - i) / 4, &data))
|
|
return false;
|
|
|
|
buffer[i] = (data >> offset) & 0xff;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
|
|
static void ar9300_comp_hdr_unpack(u8 *best, int *code, int *reference,
|
|
int *length, int *major, int *minor)
|
|
{
|
|
unsigned long value[4];
|
|
|
|
value[0] = best[0];
|
|
value[1] = best[1];
|
|
value[2] = best[2];
|
|
value[3] = best[3];
|
|
*code = ((value[0] >> 5) & 0x0007);
|
|
*reference = (value[0] & 0x001f) | ((value[1] >> 2) & 0x0020);
|
|
*length = ((value[1] << 4) & 0x07f0) | ((value[2] >> 4) & 0x000f);
|
|
*major = (value[2] & 0x000f);
|
|
*minor = (value[3] & 0x00ff);
|
|
}
|
|
|
|
static u16 ar9300_comp_cksum(u8 *data, int dsize)
|
|
{
|
|
int it, checksum = 0;
|
|
|
|
for (it = 0; it < dsize; it++) {
|
|
checksum += data[it];
|
|
checksum &= 0xffff;
|
|
}
|
|
|
|
return checksum;
|
|
}
|
|
|
|
static bool ar9300_uncompress_block(struct ath_hw *ah,
|
|
u8 *mptr,
|
|
int mdataSize,
|
|
u8 *block,
|
|
int size)
|
|
{
|
|
int it;
|
|
int spot;
|
|
int offset;
|
|
int length;
|
|
struct ath_common *common = ath9k_hw_common(ah);
|
|
|
|
spot = 0;
|
|
|
|
for (it = 0; it < size; it += (length+2)) {
|
|
offset = block[it];
|
|
offset &= 0xff;
|
|
spot += offset;
|
|
length = block[it+1];
|
|
length &= 0xff;
|
|
|
|
if (length > 0 && spot >= 0 && spot+length <= mdataSize) {
|
|
ath_dbg(common, EEPROM,
|
|
"Restore at %d: spot=%d offset=%d length=%d\n",
|
|
it, spot, offset, length);
|
|
memcpy(&mptr[spot], &block[it+2], length);
|
|
spot += length;
|
|
} else if (length > 0) {
|
|
ath_dbg(common, EEPROM,
|
|
"Bad restore at %d: spot=%d offset=%d length=%d\n",
|
|
it, spot, offset, length);
|
|
return false;
|
|
}
|
|
}
|
|
return true;
|
|
}
|
|
|
|
static int ar9300_compress_decision(struct ath_hw *ah,
|
|
int it,
|
|
int code,
|
|
int reference,
|
|
u8 *mptr,
|
|
u8 *word, int length, int mdata_size)
|
|
{
|
|
struct ath_common *common = ath9k_hw_common(ah);
|
|
const struct ar9300_eeprom *eep = NULL;
|
|
|
|
switch (code) {
|
|
case _CompressNone:
|
|
if (length != mdata_size) {
|
|
ath_dbg(common, EEPROM,
|
|
"EEPROM structure size mismatch memory=%d eeprom=%d\n",
|
|
mdata_size, length);
|
|
return -1;
|
|
}
|
|
memcpy(mptr, (u8 *) (word + COMP_HDR_LEN), length);
|
|
ath_dbg(common, EEPROM,
|
|
"restored eeprom %d: uncompressed, length %d\n",
|
|
it, length);
|
|
break;
|
|
case _CompressBlock:
|
|
if (reference == 0) {
|
|
} else {
|
|
eep = ar9003_eeprom_struct_find_by_id(reference);
|
|
if (eep == NULL) {
|
|
ath_dbg(common, EEPROM,
|
|
"can't find reference eeprom struct %d\n",
|
|
reference);
|
|
return -1;
|
|
}
|
|
memcpy(mptr, eep, mdata_size);
|
|
}
|
|
ath_dbg(common, EEPROM,
|
|
"restore eeprom %d: block, reference %d, length %d\n",
|
|
it, reference, length);
|
|
ar9300_uncompress_block(ah, mptr, mdata_size,
|
|
(u8 *) (word + COMP_HDR_LEN), length);
|
|
break;
|
|
default:
|
|
ath_dbg(common, EEPROM, "unknown compression code %d\n", code);
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
typedef bool (*eeprom_read_op)(struct ath_hw *ah, int address, u8 *buffer,
|
|
int count);
|
|
|
|
static bool ar9300_check_header(void *data)
|
|
{
|
|
u32 *word = data;
|
|
return !(*word == 0 || *word == ~0);
|
|
}
|
|
|
|
static bool ar9300_check_eeprom_header(struct ath_hw *ah, eeprom_read_op read,
|
|
int base_addr)
|
|
{
|
|
u8 header[4];
|
|
|
|
if (!read(ah, base_addr, header, 4))
|
|
return false;
|
|
|
|
return ar9300_check_header(header);
|
|
}
|
|
|
|
static int ar9300_eeprom_restore_flash(struct ath_hw *ah, u8 *mptr,
|
|
int mdata_size)
|
|
{
|
|
struct ath_common *common = ath9k_hw_common(ah);
|
|
u16 *data = (u16 *) mptr;
|
|
int i;
|
|
|
|
for (i = 0; i < mdata_size / 2; i++, data++)
|
|
ath9k_hw_nvram_read(common, i, data);
|
|
|
|
return 0;
|
|
}
|
|
/*
|
|
* Read the configuration data from the eeprom.
|
|
* The data can be put in any specified memory buffer.
|
|
*
|
|
* Returns -1 on error.
|
|
* Returns address of next memory location on success.
|
|
*/
|
|
static int ar9300_eeprom_restore_internal(struct ath_hw *ah,
|
|
u8 *mptr, int mdata_size)
|
|
{
|
|
#define MDEFAULT 15
|
|
#define MSTATE 100
|
|
int cptr;
|
|
u8 *word;
|
|
int code;
|
|
int reference, length, major, minor;
|
|
int osize;
|
|
int it;
|
|
u16 checksum, mchecksum;
|
|
struct ath_common *common = ath9k_hw_common(ah);
|
|
eeprom_read_op read;
|
|
|
|
if (ath9k_hw_use_flash(ah))
|
|
return ar9300_eeprom_restore_flash(ah, mptr, mdata_size);
|
|
|
|
word = kzalloc(2048, GFP_KERNEL);
|
|
if (!word)
|
|
return -ENOMEM;
|
|
|
|
memcpy(mptr, &ar9300_default, mdata_size);
|
|
|
|
read = ar9300_read_eeprom;
|
|
if (AR_SREV_9485(ah))
|
|
cptr = AR9300_BASE_ADDR_4K;
|
|
else if (AR_SREV_9330(ah))
|
|
cptr = AR9300_BASE_ADDR_512;
|
|
else
|
|
cptr = AR9300_BASE_ADDR;
|
|
ath_dbg(common, EEPROM, "Trying EEPROM access at Address 0x%04x\n",
|
|
cptr);
|
|
if (ar9300_check_eeprom_header(ah, read, cptr))
|
|
goto found;
|
|
|
|
cptr = AR9300_BASE_ADDR_512;
|
|
ath_dbg(common, EEPROM, "Trying EEPROM access at Address 0x%04x\n",
|
|
cptr);
|
|
if (ar9300_check_eeprom_header(ah, read, cptr))
|
|
goto found;
|
|
|
|
read = ar9300_read_otp;
|
|
cptr = AR9300_BASE_ADDR;
|
|
ath_dbg(common, EEPROM, "Trying OTP access at Address 0x%04x\n", cptr);
|
|
if (ar9300_check_eeprom_header(ah, read, cptr))
|
|
goto found;
|
|
|
|
cptr = AR9300_BASE_ADDR_512;
|
|
ath_dbg(common, EEPROM, "Trying OTP access at Address 0x%04x\n", cptr);
|
|
if (ar9300_check_eeprom_header(ah, read, cptr))
|
|
goto found;
|
|
|
|
goto fail;
|
|
|
|
found:
|
|
ath_dbg(common, EEPROM, "Found valid EEPROM data\n");
|
|
|
|
for (it = 0; it < MSTATE; it++) {
|
|
if (!read(ah, cptr, word, COMP_HDR_LEN))
|
|
goto fail;
|
|
|
|
if (!ar9300_check_header(word))
|
|
break;
|
|
|
|
ar9300_comp_hdr_unpack(word, &code, &reference,
|
|
&length, &major, &minor);
|
|
ath_dbg(common, EEPROM,
|
|
"Found block at %x: code=%d ref=%d length=%d major=%d minor=%d\n",
|
|
cptr, code, reference, length, major, minor);
|
|
if ((!AR_SREV_9485(ah) && length >= 1024) ||
|
|
(AR_SREV_9485(ah) && length > EEPROM_DATA_LEN_9485)) {
|
|
ath_dbg(common, EEPROM, "Skipping bad header\n");
|
|
cptr -= COMP_HDR_LEN;
|
|
continue;
|
|
}
|
|
|
|
osize = length;
|
|
read(ah, cptr, word, COMP_HDR_LEN + osize + COMP_CKSUM_LEN);
|
|
checksum = ar9300_comp_cksum(&word[COMP_HDR_LEN], length);
|
|
mchecksum = get_unaligned_le16(&word[COMP_HDR_LEN + osize]);
|
|
ath_dbg(common, EEPROM, "checksum %x %x\n",
|
|
checksum, mchecksum);
|
|
if (checksum == mchecksum) {
|
|
ar9300_compress_decision(ah, it, code, reference, mptr,
|
|
word, length, mdata_size);
|
|
} else {
|
|
ath_dbg(common, EEPROM,
|
|
"skipping block with bad checksum\n");
|
|
}
|
|
cptr -= (COMP_HDR_LEN + osize + COMP_CKSUM_LEN);
|
|
}
|
|
|
|
kfree(word);
|
|
return cptr;
|
|
|
|
fail:
|
|
kfree(word);
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* Restore the configuration structure by reading the eeprom.
|
|
* This function destroys any existing in-memory structure
|
|
* content.
|
|
*/
|
|
static bool ath9k_hw_ar9300_fill_eeprom(struct ath_hw *ah)
|
|
{
|
|
u8 *mptr = (u8 *) &ah->eeprom.ar9300_eep;
|
|
|
|
if (ar9300_eeprom_restore_internal(ah, mptr,
|
|
sizeof(struct ar9300_eeprom)) < 0)
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
#if defined(CONFIG_ATH9K_DEBUGFS) || defined(CONFIG_ATH9K_HTC_DEBUGFS)
|
|
static u32 ar9003_dump_modal_eeprom(char *buf, u32 len, u32 size,
|
|
struct ar9300_modal_eep_header *modal_hdr)
|
|
{
|
|
PR_EEP("Chain0 Ant. Control", le16_to_cpu(modal_hdr->antCtrlChain[0]));
|
|
PR_EEP("Chain1 Ant. Control", le16_to_cpu(modal_hdr->antCtrlChain[1]));
|
|
PR_EEP("Chain2 Ant. Control", le16_to_cpu(modal_hdr->antCtrlChain[2]));
|
|
PR_EEP("Ant. Common Control", le32_to_cpu(modal_hdr->antCtrlCommon));
|
|
PR_EEP("Ant. Common Control2", le32_to_cpu(modal_hdr->antCtrlCommon2));
|
|
PR_EEP("Ant. Gain", modal_hdr->antennaGain);
|
|
PR_EEP("Switch Settle", modal_hdr->switchSettling);
|
|
PR_EEP("Chain0 xatten1DB", modal_hdr->xatten1DB[0]);
|
|
PR_EEP("Chain1 xatten1DB", modal_hdr->xatten1DB[1]);
|
|
PR_EEP("Chain2 xatten1DB", modal_hdr->xatten1DB[2]);
|
|
PR_EEP("Chain0 xatten1Margin", modal_hdr->xatten1Margin[0]);
|
|
PR_EEP("Chain1 xatten1Margin", modal_hdr->xatten1Margin[1]);
|
|
PR_EEP("Chain2 xatten1Margin", modal_hdr->xatten1Margin[2]);
|
|
PR_EEP("Temp Slope", modal_hdr->tempSlope);
|
|
PR_EEP("Volt Slope", modal_hdr->voltSlope);
|
|
PR_EEP("spur Channels0", modal_hdr->spurChans[0]);
|
|
PR_EEP("spur Channels1", modal_hdr->spurChans[1]);
|
|
PR_EEP("spur Channels2", modal_hdr->spurChans[2]);
|
|
PR_EEP("spur Channels3", modal_hdr->spurChans[3]);
|
|
PR_EEP("spur Channels4", modal_hdr->spurChans[4]);
|
|
PR_EEP("Chain0 NF Threshold", modal_hdr->noiseFloorThreshCh[0]);
|
|
PR_EEP("Chain1 NF Threshold", modal_hdr->noiseFloorThreshCh[1]);
|
|
PR_EEP("Chain2 NF Threshold", modal_hdr->noiseFloorThreshCh[2]);
|
|
PR_EEP("Quick Drop", modal_hdr->quick_drop);
|
|
PR_EEP("txEndToXpaOff", modal_hdr->txEndToXpaOff);
|
|
PR_EEP("xPA Bias Level", modal_hdr->xpaBiasLvl);
|
|
PR_EEP("txFrameToDataStart", modal_hdr->txFrameToDataStart);
|
|
PR_EEP("txFrameToPaOn", modal_hdr->txFrameToPaOn);
|
|
PR_EEP("txFrameToXpaOn", modal_hdr->txFrameToXpaOn);
|
|
PR_EEP("txClip", modal_hdr->txClip);
|
|
PR_EEP("ADC Desired size", modal_hdr->adcDesiredSize);
|
|
|
|
return len;
|
|
}
|
|
|
|
static u32 ath9k_hw_ar9003_dump_eeprom(struct ath_hw *ah, bool dump_base_hdr,
|
|
u8 *buf, u32 len, u32 size)
|
|
{
|
|
struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
|
|
struct ar9300_base_eep_hdr *pBase;
|
|
|
|
if (!dump_base_hdr) {
|
|
len += snprintf(buf + len, size - len,
|
|
"%20s :\n", "2GHz modal Header");
|
|
len = ar9003_dump_modal_eeprom(buf, len, size,
|
|
&eep->modalHeader2G);
|
|
len += snprintf(buf + len, size - len,
|
|
"%20s :\n", "5GHz modal Header");
|
|
len = ar9003_dump_modal_eeprom(buf, len, size,
|
|
&eep->modalHeader5G);
|
|
goto out;
|
|
}
|
|
|
|
pBase = &eep->baseEepHeader;
|
|
|
|
PR_EEP("EEPROM Version", ah->eeprom.ar9300_eep.eepromVersion);
|
|
PR_EEP("RegDomain1", le16_to_cpu(pBase->regDmn[0]));
|
|
PR_EEP("RegDomain2", le16_to_cpu(pBase->regDmn[1]));
|
|
PR_EEP("TX Mask", (pBase->txrxMask >> 4));
|
|
PR_EEP("RX Mask", (pBase->txrxMask & 0x0f));
|
|
PR_EEP("Allow 5GHz", !!(pBase->opCapFlags.opFlags &
|
|
AR5416_OPFLAGS_11A));
|
|
PR_EEP("Allow 2GHz", !!(pBase->opCapFlags.opFlags &
|
|
AR5416_OPFLAGS_11G));
|
|
PR_EEP("Disable 2GHz HT20", !!(pBase->opCapFlags.opFlags &
|
|
AR5416_OPFLAGS_N_2G_HT20));
|
|
PR_EEP("Disable 2GHz HT40", !!(pBase->opCapFlags.opFlags &
|
|
AR5416_OPFLAGS_N_2G_HT40));
|
|
PR_EEP("Disable 5Ghz HT20", !!(pBase->opCapFlags.opFlags &
|
|
AR5416_OPFLAGS_N_5G_HT20));
|
|
PR_EEP("Disable 5Ghz HT40", !!(pBase->opCapFlags.opFlags &
|
|
AR5416_OPFLAGS_N_5G_HT40));
|
|
PR_EEP("Big Endian", !!(pBase->opCapFlags.eepMisc & 0x01));
|
|
PR_EEP("RF Silent", pBase->rfSilent);
|
|
PR_EEP("BT option", pBase->blueToothOptions);
|
|
PR_EEP("Device Cap", pBase->deviceCap);
|
|
PR_EEP("Device Type", pBase->deviceType);
|
|
PR_EEP("Power Table Offset", pBase->pwrTableOffset);
|
|
PR_EEP("Tuning Caps1", pBase->params_for_tuning_caps[0]);
|
|
PR_EEP("Tuning Caps2", pBase->params_for_tuning_caps[1]);
|
|
PR_EEP("Enable Tx Temp Comp", !!(pBase->featureEnable & BIT(0)));
|
|
PR_EEP("Enable Tx Volt Comp", !!(pBase->featureEnable & BIT(1)));
|
|
PR_EEP("Enable fast clock", !!(pBase->featureEnable & BIT(2)));
|
|
PR_EEP("Enable doubling", !!(pBase->featureEnable & BIT(3)));
|
|
PR_EEP("Internal regulator", !!(pBase->featureEnable & BIT(4)));
|
|
PR_EEP("Enable Paprd", !!(pBase->featureEnable & BIT(5)));
|
|
PR_EEP("Driver Strength", !!(pBase->miscConfiguration & BIT(0)));
|
|
PR_EEP("Quick Drop", !!(pBase->miscConfiguration & BIT(1)));
|
|
PR_EEP("Chain mask Reduce", (pBase->miscConfiguration >> 0x3) & 0x1);
|
|
PR_EEP("Write enable Gpio", pBase->eepromWriteEnableGpio);
|
|
PR_EEP("WLAN Disable Gpio", pBase->wlanDisableGpio);
|
|
PR_EEP("WLAN LED Gpio", pBase->wlanLedGpio);
|
|
PR_EEP("Rx Band Select Gpio", pBase->rxBandSelectGpio);
|
|
PR_EEP("Tx Gain", pBase->txrxgain >> 4);
|
|
PR_EEP("Rx Gain", pBase->txrxgain & 0xf);
|
|
PR_EEP("SW Reg", le32_to_cpu(pBase->swreg));
|
|
|
|
len += snprintf(buf + len, size - len, "%20s : %pM\n", "MacAddress",
|
|
ah->eeprom.ar9300_eep.macAddr);
|
|
out:
|
|
if (len > size)
|
|
len = size;
|
|
|
|
return len;
|
|
}
|
|
#else
|
|
static u32 ath9k_hw_ar9003_dump_eeprom(struct ath_hw *ah, bool dump_base_hdr,
|
|
u8 *buf, u32 len, u32 size)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
/* XXX: review hardware docs */
|
|
static int ath9k_hw_ar9300_get_eeprom_ver(struct ath_hw *ah)
|
|
{
|
|
return ah->eeprom.ar9300_eep.eepromVersion;
|
|
}
|
|
|
|
/* XXX: could be read from the eepromVersion, not sure yet */
|
|
static int ath9k_hw_ar9300_get_eeprom_rev(struct ath_hw *ah)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static s32 ar9003_hw_xpa_bias_level_get(struct ath_hw *ah, bool is2ghz)
|
|
{
|
|
struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
|
|
|
|
if (is2ghz)
|
|
return eep->modalHeader2G.xpaBiasLvl;
|
|
else
|
|
return eep->modalHeader5G.xpaBiasLvl;
|
|
}
|
|
|
|
static void ar9003_hw_xpa_bias_level_apply(struct ath_hw *ah, bool is2ghz)
|
|
{
|
|
int bias = ar9003_hw_xpa_bias_level_get(ah, is2ghz);
|
|
|
|
if (AR_SREV_9485(ah) || AR_SREV_9330(ah) || AR_SREV_9340(ah))
|
|
REG_RMW_FIELD(ah, AR_CH0_TOP2, AR_CH0_TOP2_XPABIASLVL, bias);
|
|
else if (AR_SREV_9462(ah) || AR_SREV_9550(ah))
|
|
REG_RMW_FIELD(ah, AR_CH0_TOP, AR_CH0_TOP_XPABIASLVL, bias);
|
|
else {
|
|
REG_RMW_FIELD(ah, AR_CH0_TOP, AR_CH0_TOP_XPABIASLVL, bias);
|
|
REG_RMW_FIELD(ah, AR_CH0_THERM,
|
|
AR_CH0_THERM_XPABIASLVL_MSB,
|
|
bias >> 2);
|
|
REG_RMW_FIELD(ah, AR_CH0_THERM,
|
|
AR_CH0_THERM_XPASHORT2GND, 1);
|
|
}
|
|
}
|
|
|
|
static u16 ar9003_switch_com_spdt_get(struct ath_hw *ah, bool is_2ghz)
|
|
{
|
|
struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
|
|
__le16 val;
|
|
|
|
if (is_2ghz)
|
|
val = eep->modalHeader2G.switchcomspdt;
|
|
else
|
|
val = eep->modalHeader5G.switchcomspdt;
|
|
return le16_to_cpu(val);
|
|
}
|
|
|
|
|
|
static u32 ar9003_hw_ant_ctrl_common_get(struct ath_hw *ah, bool is2ghz)
|
|
{
|
|
struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
|
|
__le32 val;
|
|
|
|
if (is2ghz)
|
|
val = eep->modalHeader2G.antCtrlCommon;
|
|
else
|
|
val = eep->modalHeader5G.antCtrlCommon;
|
|
return le32_to_cpu(val);
|
|
}
|
|
|
|
static u32 ar9003_hw_ant_ctrl_common_2_get(struct ath_hw *ah, bool is2ghz)
|
|
{
|
|
struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
|
|
__le32 val;
|
|
|
|
if (is2ghz)
|
|
val = eep->modalHeader2G.antCtrlCommon2;
|
|
else
|
|
val = eep->modalHeader5G.antCtrlCommon2;
|
|
return le32_to_cpu(val);
|
|
}
|
|
|
|
static u16 ar9003_hw_ant_ctrl_chain_get(struct ath_hw *ah,
|
|
int chain,
|
|
bool is2ghz)
|
|
{
|
|
struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
|
|
__le16 val = 0;
|
|
|
|
if (chain >= 0 && chain < AR9300_MAX_CHAINS) {
|
|
if (is2ghz)
|
|
val = eep->modalHeader2G.antCtrlChain[chain];
|
|
else
|
|
val = eep->modalHeader5G.antCtrlChain[chain];
|
|
}
|
|
|
|
return le16_to_cpu(val);
|
|
}
|
|
|
|
static void ar9003_hw_ant_ctrl_apply(struct ath_hw *ah, bool is2ghz)
|
|
{
|
|
int chain;
|
|
u32 regval;
|
|
u32 ant_div_ctl1;
|
|
static const u32 switch_chain_reg[AR9300_MAX_CHAINS] = {
|
|
AR_PHY_SWITCH_CHAIN_0,
|
|
AR_PHY_SWITCH_CHAIN_1,
|
|
AR_PHY_SWITCH_CHAIN_2,
|
|
};
|
|
|
|
u32 value = ar9003_hw_ant_ctrl_common_get(ah, is2ghz);
|
|
|
|
if (AR_SREV_9462(ah)) {
|
|
REG_RMW_FIELD(ah, AR_PHY_SWITCH_COM,
|
|
AR_SWITCH_TABLE_COM_AR9462_ALL, value);
|
|
} else if (AR_SREV_9550(ah)) {
|
|
REG_RMW_FIELD(ah, AR_PHY_SWITCH_COM,
|
|
AR_SWITCH_TABLE_COM_AR9550_ALL, value);
|
|
} else
|
|
REG_RMW_FIELD(ah, AR_PHY_SWITCH_COM,
|
|
AR_SWITCH_TABLE_COM_ALL, value);
|
|
|
|
|
|
/*
|
|
* AR9462 defines new switch table for BT/WLAN,
|
|
* here's new field name in XXX.ref for both 2G and 5G.
|
|
* Register: [GLB_CONTROL] GLB_CONTROL (@0x20044)
|
|
* 15:12 R/W SWITCH_TABLE_COM_SPDT_WLAN_RX
|
|
* SWITCH_TABLE_COM_SPDT_WLAN_RX
|
|
*
|
|
* 11:8 R/W SWITCH_TABLE_COM_SPDT_WLAN_TX
|
|
* SWITCH_TABLE_COM_SPDT_WLAN_TX
|
|
*
|
|
* 7:4 R/W SWITCH_TABLE_COM_SPDT_WLAN_IDLE
|
|
* SWITCH_TABLE_COM_SPDT_WLAN_IDLE
|
|
*/
|
|
if (AR_SREV_9462_20_OR_LATER(ah)) {
|
|
value = ar9003_switch_com_spdt_get(ah, is2ghz);
|
|
REG_RMW_FIELD(ah, AR_PHY_GLB_CONTROL,
|
|
AR_SWITCH_TABLE_COM_SPDT_ALL, value);
|
|
REG_SET_BIT(ah, AR_PHY_GLB_CONTROL, AR_BTCOEX_CTRL_SPDT_ENABLE);
|
|
}
|
|
|
|
value = ar9003_hw_ant_ctrl_common_2_get(ah, is2ghz);
|
|
REG_RMW_FIELD(ah, AR_PHY_SWITCH_COM_2, AR_SWITCH_TABLE_COM2_ALL, value);
|
|
|
|
for (chain = 0; chain < AR9300_MAX_CHAINS; chain++) {
|
|
if ((ah->rxchainmask & BIT(chain)) ||
|
|
(ah->txchainmask & BIT(chain))) {
|
|
value = ar9003_hw_ant_ctrl_chain_get(ah, chain,
|
|
is2ghz);
|
|
REG_RMW_FIELD(ah, switch_chain_reg[chain],
|
|
AR_SWITCH_TABLE_ALL, value);
|
|
}
|
|
}
|
|
|
|
if (AR_SREV_9330(ah) || AR_SREV_9485(ah)) {
|
|
value = ath9k_hw_ar9300_get_eeprom(ah, EEP_ANT_DIV_CTL1);
|
|
/*
|
|
* main_lnaconf, alt_lnaconf, main_tb, alt_tb
|
|
* are the fields present
|
|
*/
|
|
regval = REG_READ(ah, AR_PHY_MC_GAIN_CTRL);
|
|
regval &= (~AR_ANT_DIV_CTRL_ALL);
|
|
regval |= (value & 0x3f) << AR_ANT_DIV_CTRL_ALL_S;
|
|
/* enable_lnadiv */
|
|
regval &= (~AR_PHY_9485_ANT_DIV_LNADIV);
|
|
regval |= ((value >> 6) & 0x1) <<
|
|
AR_PHY_9485_ANT_DIV_LNADIV_S;
|
|
REG_WRITE(ah, AR_PHY_MC_GAIN_CTRL, regval);
|
|
|
|
/*enable fast_div */
|
|
regval = REG_READ(ah, AR_PHY_CCK_DETECT);
|
|
regval &= (~AR_FAST_DIV_ENABLE);
|
|
regval |= ((value >> 7) & 0x1) <<
|
|
AR_FAST_DIV_ENABLE_S;
|
|
REG_WRITE(ah, AR_PHY_CCK_DETECT, regval);
|
|
ant_div_ctl1 =
|
|
ah->eep_ops->get_eeprom(ah, EEP_ANT_DIV_CTL1);
|
|
/* check whether antenna diversity is enabled */
|
|
if ((ant_div_ctl1 >> 0x6) == 0x3) {
|
|
regval = REG_READ(ah, AR_PHY_MC_GAIN_CTRL);
|
|
/*
|
|
* clear bits 25-30 main_lnaconf, alt_lnaconf,
|
|
* main_tb, alt_tb
|
|
*/
|
|
regval &= (~(AR_PHY_9485_ANT_DIV_MAIN_LNACONF |
|
|
AR_PHY_9485_ANT_DIV_ALT_LNACONF |
|
|
AR_PHY_9485_ANT_DIV_ALT_GAINTB |
|
|
AR_PHY_9485_ANT_DIV_MAIN_GAINTB));
|
|
/* by default use LNA1 for the main antenna */
|
|
regval |= (AR_PHY_9485_ANT_DIV_LNA1 <<
|
|
AR_PHY_9485_ANT_DIV_MAIN_LNACONF_S);
|
|
regval |= (AR_PHY_9485_ANT_DIV_LNA2 <<
|
|
AR_PHY_9485_ANT_DIV_ALT_LNACONF_S);
|
|
REG_WRITE(ah, AR_PHY_MC_GAIN_CTRL, regval);
|
|
}
|
|
|
|
|
|
}
|
|
|
|
}
|
|
|
|
static void ar9003_hw_drive_strength_apply(struct ath_hw *ah)
|
|
{
|
|
int drive_strength;
|
|
unsigned long reg;
|
|
|
|
drive_strength = ath9k_hw_ar9300_get_eeprom(ah, EEP_DRIVE_STRENGTH);
|
|
|
|
if (!drive_strength)
|
|
return;
|
|
|
|
reg = REG_READ(ah, AR_PHY_65NM_CH0_BIAS1);
|
|
reg &= ~0x00ffffc0;
|
|
reg |= 0x5 << 21;
|
|
reg |= 0x5 << 18;
|
|
reg |= 0x5 << 15;
|
|
reg |= 0x5 << 12;
|
|
reg |= 0x5 << 9;
|
|
reg |= 0x5 << 6;
|
|
REG_WRITE(ah, AR_PHY_65NM_CH0_BIAS1, reg);
|
|
|
|
reg = REG_READ(ah, AR_PHY_65NM_CH0_BIAS2);
|
|
reg &= ~0xffffffe0;
|
|
reg |= 0x5 << 29;
|
|
reg |= 0x5 << 26;
|
|
reg |= 0x5 << 23;
|
|
reg |= 0x5 << 20;
|
|
reg |= 0x5 << 17;
|
|
reg |= 0x5 << 14;
|
|
reg |= 0x5 << 11;
|
|
reg |= 0x5 << 8;
|
|
reg |= 0x5 << 5;
|
|
REG_WRITE(ah, AR_PHY_65NM_CH0_BIAS2, reg);
|
|
|
|
reg = REG_READ(ah, AR_PHY_65NM_CH0_BIAS4);
|
|
reg &= ~0xff800000;
|
|
reg |= 0x5 << 29;
|
|
reg |= 0x5 << 26;
|
|
reg |= 0x5 << 23;
|
|
REG_WRITE(ah, AR_PHY_65NM_CH0_BIAS4, reg);
|
|
}
|
|
|
|
static u16 ar9003_hw_atten_chain_get(struct ath_hw *ah, int chain,
|
|
struct ath9k_channel *chan)
|
|
{
|
|
int f[3], t[3];
|
|
u16 value;
|
|
struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
|
|
|
|
if (chain >= 0 && chain < 3) {
|
|
if (IS_CHAN_2GHZ(chan))
|
|
return eep->modalHeader2G.xatten1DB[chain];
|
|
else if (eep->base_ext2.xatten1DBLow[chain] != 0) {
|
|
t[0] = eep->base_ext2.xatten1DBLow[chain];
|
|
f[0] = 5180;
|
|
t[1] = eep->modalHeader5G.xatten1DB[chain];
|
|
f[1] = 5500;
|
|
t[2] = eep->base_ext2.xatten1DBHigh[chain];
|
|
f[2] = 5785;
|
|
value = ar9003_hw_power_interpolate((s32) chan->channel,
|
|
f, t, 3);
|
|
return value;
|
|
} else
|
|
return eep->modalHeader5G.xatten1DB[chain];
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static u16 ar9003_hw_atten_chain_get_margin(struct ath_hw *ah, int chain,
|
|
struct ath9k_channel *chan)
|
|
{
|
|
int f[3], t[3];
|
|
u16 value;
|
|
struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
|
|
|
|
if (chain >= 0 && chain < 3) {
|
|
if (IS_CHAN_2GHZ(chan))
|
|
return eep->modalHeader2G.xatten1Margin[chain];
|
|
else if (eep->base_ext2.xatten1MarginLow[chain] != 0) {
|
|
t[0] = eep->base_ext2.xatten1MarginLow[chain];
|
|
f[0] = 5180;
|
|
t[1] = eep->modalHeader5G.xatten1Margin[chain];
|
|
f[1] = 5500;
|
|
t[2] = eep->base_ext2.xatten1MarginHigh[chain];
|
|
f[2] = 5785;
|
|
value = ar9003_hw_power_interpolate((s32) chan->channel,
|
|
f, t, 3);
|
|
return value;
|
|
} else
|
|
return eep->modalHeader5G.xatten1Margin[chain];
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ar9003_hw_atten_apply(struct ath_hw *ah, struct ath9k_channel *chan)
|
|
{
|
|
int i;
|
|
u16 value;
|
|
unsigned long ext_atten_reg[3] = {AR_PHY_EXT_ATTEN_CTL_0,
|
|
AR_PHY_EXT_ATTEN_CTL_1,
|
|
AR_PHY_EXT_ATTEN_CTL_2,
|
|
};
|
|
|
|
/* Test value. if 0 then attenuation is unused. Don't load anything. */
|
|
for (i = 0; i < 3; i++) {
|
|
if (ah->txchainmask & BIT(i)) {
|
|
value = ar9003_hw_atten_chain_get(ah, i, chan);
|
|
REG_RMW_FIELD(ah, ext_atten_reg[i],
|
|
AR_PHY_EXT_ATTEN_CTL_XATTEN1_DB, value);
|
|
|
|
value = ar9003_hw_atten_chain_get_margin(ah, i, chan);
|
|
REG_RMW_FIELD(ah, ext_atten_reg[i],
|
|
AR_PHY_EXT_ATTEN_CTL_XATTEN1_MARGIN,
|
|
value);
|
|
}
|
|
}
|
|
}
|
|
|
|
static bool is_pmu_set(struct ath_hw *ah, u32 pmu_reg, int pmu_set)
|
|
{
|
|
int timeout = 100;
|
|
|
|
while (pmu_set != REG_READ(ah, pmu_reg)) {
|
|
if (timeout-- == 0)
|
|
return false;
|
|
REG_WRITE(ah, pmu_reg, pmu_set);
|
|
udelay(10);
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
void ar9003_hw_internal_regulator_apply(struct ath_hw *ah)
|
|
{
|
|
int internal_regulator =
|
|
ath9k_hw_ar9300_get_eeprom(ah, EEP_INTERNAL_REGULATOR);
|
|
u32 reg_val;
|
|
|
|
if (internal_regulator) {
|
|
if (AR_SREV_9330(ah) || AR_SREV_9485(ah)) {
|
|
int reg_pmu_set;
|
|
|
|
reg_pmu_set = REG_READ(ah, AR_PHY_PMU2) & ~AR_PHY_PMU2_PGM;
|
|
REG_WRITE(ah, AR_PHY_PMU2, reg_pmu_set);
|
|
if (!is_pmu_set(ah, AR_PHY_PMU2, reg_pmu_set))
|
|
return;
|
|
|
|
if (AR_SREV_9330(ah)) {
|
|
if (ah->is_clk_25mhz) {
|
|
reg_pmu_set = (3 << 1) | (8 << 4) |
|
|
(3 << 8) | (1 << 14) |
|
|
(6 << 17) | (1 << 20) |
|
|
(3 << 24);
|
|
} else {
|
|
reg_pmu_set = (4 << 1) | (7 << 4) |
|
|
(3 << 8) | (1 << 14) |
|
|
(6 << 17) | (1 << 20) |
|
|
(3 << 24);
|
|
}
|
|
} else {
|
|
reg_pmu_set = (5 << 1) | (7 << 4) |
|
|
(2 << 8) | (2 << 14) |
|
|
(6 << 17) | (1 << 20) |
|
|
(3 << 24) | (1 << 28);
|
|
}
|
|
|
|
REG_WRITE(ah, AR_PHY_PMU1, reg_pmu_set);
|
|
if (!is_pmu_set(ah, AR_PHY_PMU1, reg_pmu_set))
|
|
return;
|
|
|
|
reg_pmu_set = (REG_READ(ah, AR_PHY_PMU2) & ~0xFFC00000)
|
|
| (4 << 26);
|
|
REG_WRITE(ah, AR_PHY_PMU2, reg_pmu_set);
|
|
if (!is_pmu_set(ah, AR_PHY_PMU2, reg_pmu_set))
|
|
return;
|
|
|
|
reg_pmu_set = (REG_READ(ah, AR_PHY_PMU2) & ~0x00200000)
|
|
| (1 << 21);
|
|
REG_WRITE(ah, AR_PHY_PMU2, reg_pmu_set);
|
|
if (!is_pmu_set(ah, AR_PHY_PMU2, reg_pmu_set))
|
|
return;
|
|
} else if (AR_SREV_9462(ah)) {
|
|
reg_val = ath9k_hw_ar9300_get_eeprom(ah, EEP_SWREG);
|
|
REG_WRITE(ah, AR_PHY_PMU1, reg_val);
|
|
} else {
|
|
/* Internal regulator is ON. Write swreg register. */
|
|
reg_val = ath9k_hw_ar9300_get_eeprom(ah, EEP_SWREG);
|
|
REG_WRITE(ah, AR_RTC_REG_CONTROL1,
|
|
REG_READ(ah, AR_RTC_REG_CONTROL1) &
|
|
(~AR_RTC_REG_CONTROL1_SWREG_PROGRAM));
|
|
REG_WRITE(ah, AR_RTC_REG_CONTROL0, reg_val);
|
|
/* Set REG_CONTROL1.SWREG_PROGRAM */
|
|
REG_WRITE(ah, AR_RTC_REG_CONTROL1,
|
|
REG_READ(ah,
|
|
AR_RTC_REG_CONTROL1) |
|
|
AR_RTC_REG_CONTROL1_SWREG_PROGRAM);
|
|
}
|
|
} else {
|
|
if (AR_SREV_9330(ah) || AR_SREV_9485(ah)) {
|
|
REG_RMW_FIELD(ah, AR_PHY_PMU2, AR_PHY_PMU2_PGM, 0);
|
|
while (REG_READ_FIELD(ah, AR_PHY_PMU2,
|
|
AR_PHY_PMU2_PGM))
|
|
udelay(10);
|
|
|
|
REG_RMW_FIELD(ah, AR_PHY_PMU1, AR_PHY_PMU1_PWD, 0x1);
|
|
while (!REG_READ_FIELD(ah, AR_PHY_PMU1,
|
|
AR_PHY_PMU1_PWD))
|
|
udelay(10);
|
|
REG_RMW_FIELD(ah, AR_PHY_PMU2, AR_PHY_PMU2_PGM, 0x1);
|
|
while (!REG_READ_FIELD(ah, AR_PHY_PMU2,
|
|
AR_PHY_PMU2_PGM))
|
|
udelay(10);
|
|
} else if (AR_SREV_9462(ah))
|
|
REG_RMW_FIELD(ah, AR_PHY_PMU1, AR_PHY_PMU1_PWD, 0x1);
|
|
else {
|
|
reg_val = REG_READ(ah, AR_RTC_SLEEP_CLK) |
|
|
AR_RTC_FORCE_SWREG_PRD;
|
|
REG_WRITE(ah, AR_RTC_SLEEP_CLK, reg_val);
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
static void ar9003_hw_apply_tuning_caps(struct ath_hw *ah)
|
|
{
|
|
struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
|
|
u8 tuning_caps_param = eep->baseEepHeader.params_for_tuning_caps[0];
|
|
|
|
if (eep->baseEepHeader.featureEnable & 0x40) {
|
|
tuning_caps_param &= 0x7f;
|
|
REG_RMW_FIELD(ah, AR_CH0_XTAL, AR_CH0_XTAL_CAPINDAC,
|
|
tuning_caps_param);
|
|
REG_RMW_FIELD(ah, AR_CH0_XTAL, AR_CH0_XTAL_CAPOUTDAC,
|
|
tuning_caps_param);
|
|
}
|
|
}
|
|
|
|
static void ar9003_hw_quick_drop_apply(struct ath_hw *ah, u16 freq)
|
|
{
|
|
struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
|
|
int quick_drop = ath9k_hw_ar9300_get_eeprom(ah, EEP_QUICK_DROP);
|
|
s32 t[3], f[3] = {5180, 5500, 5785};
|
|
|
|
if (!quick_drop)
|
|
return;
|
|
|
|
if (freq < 4000)
|
|
quick_drop = eep->modalHeader2G.quick_drop;
|
|
else {
|
|
t[0] = eep->base_ext1.quick_drop_low;
|
|
t[1] = eep->modalHeader5G.quick_drop;
|
|
t[2] = eep->base_ext1.quick_drop_high;
|
|
quick_drop = ar9003_hw_power_interpolate(freq, f, t, 3);
|
|
}
|
|
REG_RMW_FIELD(ah, AR_PHY_AGC, AR_PHY_AGC_QUICK_DROP, quick_drop);
|
|
}
|
|
|
|
static void ar9003_hw_txend_to_xpa_off_apply(struct ath_hw *ah, u16 freq)
|
|
{
|
|
struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
|
|
u32 value;
|
|
|
|
value = (freq < 4000) ? eep->modalHeader2G.txEndToXpaOff :
|
|
eep->modalHeader5G.txEndToXpaOff;
|
|
|
|
REG_RMW_FIELD(ah, AR_PHY_XPA_TIMING_CTL,
|
|
AR_PHY_XPA_TIMING_CTL_TX_END_XPAB_OFF, value);
|
|
REG_RMW_FIELD(ah, AR_PHY_XPA_TIMING_CTL,
|
|
AR_PHY_XPA_TIMING_CTL_TX_END_XPAA_OFF, value);
|
|
}
|
|
|
|
static void ath9k_hw_ar9300_set_board_values(struct ath_hw *ah,
|
|
struct ath9k_channel *chan)
|
|
{
|
|
ar9003_hw_xpa_bias_level_apply(ah, IS_CHAN_2GHZ(chan));
|
|
ar9003_hw_ant_ctrl_apply(ah, IS_CHAN_2GHZ(chan));
|
|
ar9003_hw_drive_strength_apply(ah);
|
|
ar9003_hw_atten_apply(ah, chan);
|
|
ar9003_hw_quick_drop_apply(ah, chan->channel);
|
|
if (!AR_SREV_9330(ah) && !AR_SREV_9340(ah) && !AR_SREV_9550(ah))
|
|
ar9003_hw_internal_regulator_apply(ah);
|
|
if (AR_SREV_9485(ah) || AR_SREV_9330(ah) || AR_SREV_9340(ah))
|
|
ar9003_hw_apply_tuning_caps(ah);
|
|
ar9003_hw_txend_to_xpa_off_apply(ah, chan->channel);
|
|
}
|
|
|
|
static void ath9k_hw_ar9300_set_addac(struct ath_hw *ah,
|
|
struct ath9k_channel *chan)
|
|
{
|
|
}
|
|
|
|
/*
|
|
* Returns the interpolated y value corresponding to the specified x value
|
|
* from the np ordered pairs of data (px,py).
|
|
* The pairs do not have to be in any order.
|
|
* If the specified x value is less than any of the px,
|
|
* the returned y value is equal to the py for the lowest px.
|
|
* If the specified x value is greater than any of the px,
|
|
* the returned y value is equal to the py for the highest px.
|
|
*/
|
|
static int ar9003_hw_power_interpolate(int32_t x,
|
|
int32_t *px, int32_t *py, u_int16_t np)
|
|
{
|
|
int ip = 0;
|
|
int lx = 0, ly = 0, lhave = 0;
|
|
int hx = 0, hy = 0, hhave = 0;
|
|
int dx = 0;
|
|
int y = 0;
|
|
|
|
lhave = 0;
|
|
hhave = 0;
|
|
|
|
/* identify best lower and higher x calibration measurement */
|
|
for (ip = 0; ip < np; ip++) {
|
|
dx = x - px[ip];
|
|
|
|
/* this measurement is higher than our desired x */
|
|
if (dx <= 0) {
|
|
if (!hhave || dx > (x - hx)) {
|
|
/* new best higher x measurement */
|
|
hx = px[ip];
|
|
hy = py[ip];
|
|
hhave = 1;
|
|
}
|
|
}
|
|
/* this measurement is lower than our desired x */
|
|
if (dx >= 0) {
|
|
if (!lhave || dx < (x - lx)) {
|
|
/* new best lower x measurement */
|
|
lx = px[ip];
|
|
ly = py[ip];
|
|
lhave = 1;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* the low x is good */
|
|
if (lhave) {
|
|
/* so is the high x */
|
|
if (hhave) {
|
|
/* they're the same, so just pick one */
|
|
if (hx == lx)
|
|
y = ly;
|
|
else /* interpolate */
|
|
y = interpolate(x, lx, hx, ly, hy);
|
|
} else /* only low is good, use it */
|
|
y = ly;
|
|
} else if (hhave) /* only high is good, use it */
|
|
y = hy;
|
|
else /* nothing is good,this should never happen unless np=0, ???? */
|
|
y = -(1 << 30);
|
|
return y;
|
|
}
|
|
|
|
static u8 ar9003_hw_eeprom_get_tgt_pwr(struct ath_hw *ah,
|
|
u16 rateIndex, u16 freq, bool is2GHz)
|
|
{
|
|
u16 numPiers, i;
|
|
s32 targetPowerArray[AR9300_NUM_5G_20_TARGET_POWERS];
|
|
s32 freqArray[AR9300_NUM_5G_20_TARGET_POWERS];
|
|
struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
|
|
struct cal_tgt_pow_legacy *pEepromTargetPwr;
|
|
u8 *pFreqBin;
|
|
|
|
if (is2GHz) {
|
|
numPiers = AR9300_NUM_2G_20_TARGET_POWERS;
|
|
pEepromTargetPwr = eep->calTargetPower2G;
|
|
pFreqBin = eep->calTarget_freqbin_2G;
|
|
} else {
|
|
numPiers = AR9300_NUM_5G_20_TARGET_POWERS;
|
|
pEepromTargetPwr = eep->calTargetPower5G;
|
|
pFreqBin = eep->calTarget_freqbin_5G;
|
|
}
|
|
|
|
/*
|
|
* create array of channels and targetpower from
|
|
* targetpower piers stored on eeprom
|
|
*/
|
|
for (i = 0; i < numPiers; i++) {
|
|
freqArray[i] = ath9k_hw_fbin2freq(pFreqBin[i], is2GHz);
|
|
targetPowerArray[i] = pEepromTargetPwr[i].tPow2x[rateIndex];
|
|
}
|
|
|
|
/* interpolate to get target power for given frequency */
|
|
return (u8) ar9003_hw_power_interpolate((s32) freq,
|
|
freqArray,
|
|
targetPowerArray, numPiers);
|
|
}
|
|
|
|
static u8 ar9003_hw_eeprom_get_ht20_tgt_pwr(struct ath_hw *ah,
|
|
u16 rateIndex,
|
|
u16 freq, bool is2GHz)
|
|
{
|
|
u16 numPiers, i;
|
|
s32 targetPowerArray[AR9300_NUM_5G_20_TARGET_POWERS];
|
|
s32 freqArray[AR9300_NUM_5G_20_TARGET_POWERS];
|
|
struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
|
|
struct cal_tgt_pow_ht *pEepromTargetPwr;
|
|
u8 *pFreqBin;
|
|
|
|
if (is2GHz) {
|
|
numPiers = AR9300_NUM_2G_20_TARGET_POWERS;
|
|
pEepromTargetPwr = eep->calTargetPower2GHT20;
|
|
pFreqBin = eep->calTarget_freqbin_2GHT20;
|
|
} else {
|
|
numPiers = AR9300_NUM_5G_20_TARGET_POWERS;
|
|
pEepromTargetPwr = eep->calTargetPower5GHT20;
|
|
pFreqBin = eep->calTarget_freqbin_5GHT20;
|
|
}
|
|
|
|
/*
|
|
* create array of channels and targetpower
|
|
* from targetpower piers stored on eeprom
|
|
*/
|
|
for (i = 0; i < numPiers; i++) {
|
|
freqArray[i] = ath9k_hw_fbin2freq(pFreqBin[i], is2GHz);
|
|
targetPowerArray[i] = pEepromTargetPwr[i].tPow2x[rateIndex];
|
|
}
|
|
|
|
/* interpolate to get target power for given frequency */
|
|
return (u8) ar9003_hw_power_interpolate((s32) freq,
|
|
freqArray,
|
|
targetPowerArray, numPiers);
|
|
}
|
|
|
|
static u8 ar9003_hw_eeprom_get_ht40_tgt_pwr(struct ath_hw *ah,
|
|
u16 rateIndex,
|
|
u16 freq, bool is2GHz)
|
|
{
|
|
u16 numPiers, i;
|
|
s32 targetPowerArray[AR9300_NUM_5G_40_TARGET_POWERS];
|
|
s32 freqArray[AR9300_NUM_5G_40_TARGET_POWERS];
|
|
struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
|
|
struct cal_tgt_pow_ht *pEepromTargetPwr;
|
|
u8 *pFreqBin;
|
|
|
|
if (is2GHz) {
|
|
numPiers = AR9300_NUM_2G_40_TARGET_POWERS;
|
|
pEepromTargetPwr = eep->calTargetPower2GHT40;
|
|
pFreqBin = eep->calTarget_freqbin_2GHT40;
|
|
} else {
|
|
numPiers = AR9300_NUM_5G_40_TARGET_POWERS;
|
|
pEepromTargetPwr = eep->calTargetPower5GHT40;
|
|
pFreqBin = eep->calTarget_freqbin_5GHT40;
|
|
}
|
|
|
|
/*
|
|
* create array of channels and targetpower from
|
|
* targetpower piers stored on eeprom
|
|
*/
|
|
for (i = 0; i < numPiers; i++) {
|
|
freqArray[i] = ath9k_hw_fbin2freq(pFreqBin[i], is2GHz);
|
|
targetPowerArray[i] = pEepromTargetPwr[i].tPow2x[rateIndex];
|
|
}
|
|
|
|
/* interpolate to get target power for given frequency */
|
|
return (u8) ar9003_hw_power_interpolate((s32) freq,
|
|
freqArray,
|
|
targetPowerArray, numPiers);
|
|
}
|
|
|
|
static u8 ar9003_hw_eeprom_get_cck_tgt_pwr(struct ath_hw *ah,
|
|
u16 rateIndex, u16 freq)
|
|
{
|
|
u16 numPiers = AR9300_NUM_2G_CCK_TARGET_POWERS, i;
|
|
s32 targetPowerArray[AR9300_NUM_2G_CCK_TARGET_POWERS];
|
|
s32 freqArray[AR9300_NUM_2G_CCK_TARGET_POWERS];
|
|
struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
|
|
struct cal_tgt_pow_legacy *pEepromTargetPwr = eep->calTargetPowerCck;
|
|
u8 *pFreqBin = eep->calTarget_freqbin_Cck;
|
|
|
|
/*
|
|
* create array of channels and targetpower from
|
|
* targetpower piers stored on eeprom
|
|
*/
|
|
for (i = 0; i < numPiers; i++) {
|
|
freqArray[i] = ath9k_hw_fbin2freq(pFreqBin[i], 1);
|
|
targetPowerArray[i] = pEepromTargetPwr[i].tPow2x[rateIndex];
|
|
}
|
|
|
|
/* interpolate to get target power for given frequency */
|
|
return (u8) ar9003_hw_power_interpolate((s32) freq,
|
|
freqArray,
|
|
targetPowerArray, numPiers);
|
|
}
|
|
|
|
/* Set tx power registers to array of values passed in */
|
|
static int ar9003_hw_tx_power_regwrite(struct ath_hw *ah, u8 * pPwrArray)
|
|
{
|
|
#define POW_SM(_r, _s) (((_r) & 0x3f) << (_s))
|
|
/* make sure forced gain is not set */
|
|
REG_WRITE(ah, AR_PHY_TX_FORCED_GAIN, 0);
|
|
|
|
/* Write the OFDM power per rate set */
|
|
|
|
/* 6 (LSB), 9, 12, 18 (MSB) */
|
|
REG_WRITE(ah, AR_PHY_POWER_TX_RATE(0),
|
|
POW_SM(pPwrArray[ALL_TARGET_LEGACY_6_24], 24) |
|
|
POW_SM(pPwrArray[ALL_TARGET_LEGACY_6_24], 16) |
|
|
POW_SM(pPwrArray[ALL_TARGET_LEGACY_6_24], 8) |
|
|
POW_SM(pPwrArray[ALL_TARGET_LEGACY_6_24], 0));
|
|
|
|
/* 24 (LSB), 36, 48, 54 (MSB) */
|
|
REG_WRITE(ah, AR_PHY_POWER_TX_RATE(1),
|
|
POW_SM(pPwrArray[ALL_TARGET_LEGACY_54], 24) |
|
|
POW_SM(pPwrArray[ALL_TARGET_LEGACY_48], 16) |
|
|
POW_SM(pPwrArray[ALL_TARGET_LEGACY_36], 8) |
|
|
POW_SM(pPwrArray[ALL_TARGET_LEGACY_6_24], 0));
|
|
|
|
/* Write the CCK power per rate set */
|
|
|
|
/* 1L (LSB), reserved, 2L, 2S (MSB) */
|
|
REG_WRITE(ah, AR_PHY_POWER_TX_RATE(2),
|
|
POW_SM(pPwrArray[ALL_TARGET_LEGACY_1L_5L], 24) |
|
|
POW_SM(pPwrArray[ALL_TARGET_LEGACY_1L_5L], 16) |
|
|
/* POW_SM(txPowerTimes2, 8) | this is reserved for AR9003 */
|
|
POW_SM(pPwrArray[ALL_TARGET_LEGACY_1L_5L], 0));
|
|
|
|
/* 5.5L (LSB), 5.5S, 11L, 11S (MSB) */
|
|
REG_WRITE(ah, AR_PHY_POWER_TX_RATE(3),
|
|
POW_SM(pPwrArray[ALL_TARGET_LEGACY_11S], 24) |
|
|
POW_SM(pPwrArray[ALL_TARGET_LEGACY_11L], 16) |
|
|
POW_SM(pPwrArray[ALL_TARGET_LEGACY_5S], 8) |
|
|
POW_SM(pPwrArray[ALL_TARGET_LEGACY_1L_5L], 0)
|
|
);
|
|
|
|
/* Write the power for duplicated frames - HT40 */
|
|
|
|
/* dup40_cck (LSB), dup40_ofdm, ext20_cck, ext20_ofdm (MSB) */
|
|
REG_WRITE(ah, AR_PHY_POWER_TX_RATE(8),
|
|
POW_SM(pPwrArray[ALL_TARGET_LEGACY_6_24], 24) |
|
|
POW_SM(pPwrArray[ALL_TARGET_LEGACY_1L_5L], 16) |
|
|
POW_SM(pPwrArray[ALL_TARGET_LEGACY_6_24], 8) |
|
|
POW_SM(pPwrArray[ALL_TARGET_LEGACY_1L_5L], 0)
|
|
);
|
|
|
|
/* Write the HT20 power per rate set */
|
|
|
|
/* 0/8/16 (LSB), 1-3/9-11/17-19, 4, 5 (MSB) */
|
|
REG_WRITE(ah, AR_PHY_POWER_TX_RATE(4),
|
|
POW_SM(pPwrArray[ALL_TARGET_HT20_5], 24) |
|
|
POW_SM(pPwrArray[ALL_TARGET_HT20_4], 16) |
|
|
POW_SM(pPwrArray[ALL_TARGET_HT20_1_3_9_11_17_19], 8) |
|
|
POW_SM(pPwrArray[ALL_TARGET_HT20_0_8_16], 0)
|
|
);
|
|
|
|
/* 6 (LSB), 7, 12, 13 (MSB) */
|
|
REG_WRITE(ah, AR_PHY_POWER_TX_RATE(5),
|
|
POW_SM(pPwrArray[ALL_TARGET_HT20_13], 24) |
|
|
POW_SM(pPwrArray[ALL_TARGET_HT20_12], 16) |
|
|
POW_SM(pPwrArray[ALL_TARGET_HT20_7], 8) |
|
|
POW_SM(pPwrArray[ALL_TARGET_HT20_6], 0)
|
|
);
|
|
|
|
/* 14 (LSB), 15, 20, 21 */
|
|
REG_WRITE(ah, AR_PHY_POWER_TX_RATE(9),
|
|
POW_SM(pPwrArray[ALL_TARGET_HT20_21], 24) |
|
|
POW_SM(pPwrArray[ALL_TARGET_HT20_20], 16) |
|
|
POW_SM(pPwrArray[ALL_TARGET_HT20_15], 8) |
|
|
POW_SM(pPwrArray[ALL_TARGET_HT20_14], 0)
|
|
);
|
|
|
|
/* Mixed HT20 and HT40 rates */
|
|
|
|
/* HT20 22 (LSB), HT20 23, HT40 22, HT40 23 (MSB) */
|
|
REG_WRITE(ah, AR_PHY_POWER_TX_RATE(10),
|
|
POW_SM(pPwrArray[ALL_TARGET_HT40_23], 24) |
|
|
POW_SM(pPwrArray[ALL_TARGET_HT40_22], 16) |
|
|
POW_SM(pPwrArray[ALL_TARGET_HT20_23], 8) |
|
|
POW_SM(pPwrArray[ALL_TARGET_HT20_22], 0)
|
|
);
|
|
|
|
/*
|
|
* Write the HT40 power per rate set
|
|
* correct PAR difference between HT40 and HT20/LEGACY
|
|
* 0/8/16 (LSB), 1-3/9-11/17-19, 4, 5 (MSB)
|
|
*/
|
|
REG_WRITE(ah, AR_PHY_POWER_TX_RATE(6),
|
|
POW_SM(pPwrArray[ALL_TARGET_HT40_5], 24) |
|
|
POW_SM(pPwrArray[ALL_TARGET_HT40_4], 16) |
|
|
POW_SM(pPwrArray[ALL_TARGET_HT40_1_3_9_11_17_19], 8) |
|
|
POW_SM(pPwrArray[ALL_TARGET_HT40_0_8_16], 0)
|
|
);
|
|
|
|
/* 6 (LSB), 7, 12, 13 (MSB) */
|
|
REG_WRITE(ah, AR_PHY_POWER_TX_RATE(7),
|
|
POW_SM(pPwrArray[ALL_TARGET_HT40_13], 24) |
|
|
POW_SM(pPwrArray[ALL_TARGET_HT40_12], 16) |
|
|
POW_SM(pPwrArray[ALL_TARGET_HT40_7], 8) |
|
|
POW_SM(pPwrArray[ALL_TARGET_HT40_6], 0)
|
|
);
|
|
|
|
/* 14 (LSB), 15, 20, 21 */
|
|
REG_WRITE(ah, AR_PHY_POWER_TX_RATE(11),
|
|
POW_SM(pPwrArray[ALL_TARGET_HT40_21], 24) |
|
|
POW_SM(pPwrArray[ALL_TARGET_HT40_20], 16) |
|
|
POW_SM(pPwrArray[ALL_TARGET_HT40_15], 8) |
|
|
POW_SM(pPwrArray[ALL_TARGET_HT40_14], 0)
|
|
);
|
|
|
|
return 0;
|
|
#undef POW_SM
|
|
}
|
|
|
|
static void ar9003_hw_get_legacy_target_powers(struct ath_hw *ah, u16 freq,
|
|
u8 *targetPowerValT2,
|
|
bool is2GHz)
|
|
{
|
|
targetPowerValT2[ALL_TARGET_LEGACY_6_24] =
|
|
ar9003_hw_eeprom_get_tgt_pwr(ah, LEGACY_TARGET_RATE_6_24, freq,
|
|
is2GHz);
|
|
targetPowerValT2[ALL_TARGET_LEGACY_36] =
|
|
ar9003_hw_eeprom_get_tgt_pwr(ah, LEGACY_TARGET_RATE_36, freq,
|
|
is2GHz);
|
|
targetPowerValT2[ALL_TARGET_LEGACY_48] =
|
|
ar9003_hw_eeprom_get_tgt_pwr(ah, LEGACY_TARGET_RATE_48, freq,
|
|
is2GHz);
|
|
targetPowerValT2[ALL_TARGET_LEGACY_54] =
|
|
ar9003_hw_eeprom_get_tgt_pwr(ah, LEGACY_TARGET_RATE_54, freq,
|
|
is2GHz);
|
|
}
|
|
|
|
static void ar9003_hw_get_cck_target_powers(struct ath_hw *ah, u16 freq,
|
|
u8 *targetPowerValT2)
|
|
{
|
|
targetPowerValT2[ALL_TARGET_LEGACY_1L_5L] =
|
|
ar9003_hw_eeprom_get_cck_tgt_pwr(ah, LEGACY_TARGET_RATE_1L_5L,
|
|
freq);
|
|
targetPowerValT2[ALL_TARGET_LEGACY_5S] =
|
|
ar9003_hw_eeprom_get_cck_tgt_pwr(ah, LEGACY_TARGET_RATE_5S, freq);
|
|
targetPowerValT2[ALL_TARGET_LEGACY_11L] =
|
|
ar9003_hw_eeprom_get_cck_tgt_pwr(ah, LEGACY_TARGET_RATE_11L, freq);
|
|
targetPowerValT2[ALL_TARGET_LEGACY_11S] =
|
|
ar9003_hw_eeprom_get_cck_tgt_pwr(ah, LEGACY_TARGET_RATE_11S, freq);
|
|
}
|
|
|
|
static void ar9003_hw_get_ht20_target_powers(struct ath_hw *ah, u16 freq,
|
|
u8 *targetPowerValT2, bool is2GHz)
|
|
{
|
|
targetPowerValT2[ALL_TARGET_HT20_0_8_16] =
|
|
ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_0_8_16, freq,
|
|
is2GHz);
|
|
targetPowerValT2[ALL_TARGET_HT20_1_3_9_11_17_19] =
|
|
ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_1_3_9_11_17_19,
|
|
freq, is2GHz);
|
|
targetPowerValT2[ALL_TARGET_HT20_4] =
|
|
ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_4, freq,
|
|
is2GHz);
|
|
targetPowerValT2[ALL_TARGET_HT20_5] =
|
|
ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_5, freq,
|
|
is2GHz);
|
|
targetPowerValT2[ALL_TARGET_HT20_6] =
|
|
ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_6, freq,
|
|
is2GHz);
|
|
targetPowerValT2[ALL_TARGET_HT20_7] =
|
|
ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_7, freq,
|
|
is2GHz);
|
|
targetPowerValT2[ALL_TARGET_HT20_12] =
|
|
ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_12, freq,
|
|
is2GHz);
|
|
targetPowerValT2[ALL_TARGET_HT20_13] =
|
|
ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_13, freq,
|
|
is2GHz);
|
|
targetPowerValT2[ALL_TARGET_HT20_14] =
|
|
ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_14, freq,
|
|
is2GHz);
|
|
targetPowerValT2[ALL_TARGET_HT20_15] =
|
|
ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_15, freq,
|
|
is2GHz);
|
|
targetPowerValT2[ALL_TARGET_HT20_20] =
|
|
ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_20, freq,
|
|
is2GHz);
|
|
targetPowerValT2[ALL_TARGET_HT20_21] =
|
|
ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_21, freq,
|
|
is2GHz);
|
|
targetPowerValT2[ALL_TARGET_HT20_22] =
|
|
ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_22, freq,
|
|
is2GHz);
|
|
targetPowerValT2[ALL_TARGET_HT20_23] =
|
|
ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_23, freq,
|
|
is2GHz);
|
|
}
|
|
|
|
static void ar9003_hw_get_ht40_target_powers(struct ath_hw *ah,
|
|
u16 freq,
|
|
u8 *targetPowerValT2,
|
|
bool is2GHz)
|
|
{
|
|
/* XXX: hard code for now, need to get from eeprom struct */
|
|
u8 ht40PowerIncForPdadc = 0;
|
|
|
|
targetPowerValT2[ALL_TARGET_HT40_0_8_16] =
|
|
ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_0_8_16, freq,
|
|
is2GHz) + ht40PowerIncForPdadc;
|
|
targetPowerValT2[ALL_TARGET_HT40_1_3_9_11_17_19] =
|
|
ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_1_3_9_11_17_19,
|
|
freq,
|
|
is2GHz) + ht40PowerIncForPdadc;
|
|
targetPowerValT2[ALL_TARGET_HT40_4] =
|
|
ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_4, freq,
|
|
is2GHz) + ht40PowerIncForPdadc;
|
|
targetPowerValT2[ALL_TARGET_HT40_5] =
|
|
ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_5, freq,
|
|
is2GHz) + ht40PowerIncForPdadc;
|
|
targetPowerValT2[ALL_TARGET_HT40_6] =
|
|
ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_6, freq,
|
|
is2GHz) + ht40PowerIncForPdadc;
|
|
targetPowerValT2[ALL_TARGET_HT40_7] =
|
|
ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_7, freq,
|
|
is2GHz) + ht40PowerIncForPdadc;
|
|
targetPowerValT2[ALL_TARGET_HT40_12] =
|
|
ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_12, freq,
|
|
is2GHz) + ht40PowerIncForPdadc;
|
|
targetPowerValT2[ALL_TARGET_HT40_13] =
|
|
ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_13, freq,
|
|
is2GHz) + ht40PowerIncForPdadc;
|
|
targetPowerValT2[ALL_TARGET_HT40_14] =
|
|
ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_14, freq,
|
|
is2GHz) + ht40PowerIncForPdadc;
|
|
targetPowerValT2[ALL_TARGET_HT40_15] =
|
|
ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_15, freq,
|
|
is2GHz) + ht40PowerIncForPdadc;
|
|
targetPowerValT2[ALL_TARGET_HT40_20] =
|
|
ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_20, freq,
|
|
is2GHz) + ht40PowerIncForPdadc;
|
|
targetPowerValT2[ALL_TARGET_HT40_21] =
|
|
ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_21, freq,
|
|
is2GHz) + ht40PowerIncForPdadc;
|
|
targetPowerValT2[ALL_TARGET_HT40_22] =
|
|
ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_22, freq,
|
|
is2GHz) + ht40PowerIncForPdadc;
|
|
targetPowerValT2[ALL_TARGET_HT40_23] =
|
|
ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_23, freq,
|
|
is2GHz) + ht40PowerIncForPdadc;
|
|
}
|
|
|
|
static void ar9003_hw_get_target_power_eeprom(struct ath_hw *ah,
|
|
struct ath9k_channel *chan,
|
|
u8 *targetPowerValT2)
|
|
{
|
|
bool is2GHz = IS_CHAN_2GHZ(chan);
|
|
unsigned int i = 0;
|
|
struct ath_common *common = ath9k_hw_common(ah);
|
|
u16 freq = chan->channel;
|
|
|
|
if (is2GHz)
|
|
ar9003_hw_get_cck_target_powers(ah, freq, targetPowerValT2);
|
|
|
|
ar9003_hw_get_legacy_target_powers(ah, freq, targetPowerValT2, is2GHz);
|
|
ar9003_hw_get_ht20_target_powers(ah, freq, targetPowerValT2, is2GHz);
|
|
|
|
if (IS_CHAN_HT40(chan))
|
|
ar9003_hw_get_ht40_target_powers(ah, freq, targetPowerValT2,
|
|
is2GHz);
|
|
|
|
for (i = 0; i < ar9300RateSize; i++) {
|
|
ath_dbg(common, EEPROM, "TPC[%02d] 0x%08x\n",
|
|
i, targetPowerValT2[i]);
|
|
}
|
|
}
|
|
|
|
static int ar9003_hw_cal_pier_get(struct ath_hw *ah,
|
|
int mode,
|
|
int ipier,
|
|
int ichain,
|
|
int *pfrequency,
|
|
int *pcorrection,
|
|
int *ptemperature, int *pvoltage)
|
|
{
|
|
u8 *pCalPier;
|
|
struct ar9300_cal_data_per_freq_op_loop *pCalPierStruct;
|
|
int is2GHz;
|
|
struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
|
|
struct ath_common *common = ath9k_hw_common(ah);
|
|
|
|
if (ichain >= AR9300_MAX_CHAINS) {
|
|
ath_dbg(common, EEPROM,
|
|
"Invalid chain index, must be less than %d\n",
|
|
AR9300_MAX_CHAINS);
|
|
return -1;
|
|
}
|
|
|
|
if (mode) { /* 5GHz */
|
|
if (ipier >= AR9300_NUM_5G_CAL_PIERS) {
|
|
ath_dbg(common, EEPROM,
|
|
"Invalid 5GHz cal pier index, must be less than %d\n",
|
|
AR9300_NUM_5G_CAL_PIERS);
|
|
return -1;
|
|
}
|
|
pCalPier = &(eep->calFreqPier5G[ipier]);
|
|
pCalPierStruct = &(eep->calPierData5G[ichain][ipier]);
|
|
is2GHz = 0;
|
|
} else {
|
|
if (ipier >= AR9300_NUM_2G_CAL_PIERS) {
|
|
ath_dbg(common, EEPROM,
|
|
"Invalid 2GHz cal pier index, must be less than %d\n",
|
|
AR9300_NUM_2G_CAL_PIERS);
|
|
return -1;
|
|
}
|
|
|
|
pCalPier = &(eep->calFreqPier2G[ipier]);
|
|
pCalPierStruct = &(eep->calPierData2G[ichain][ipier]);
|
|
is2GHz = 1;
|
|
}
|
|
|
|
*pfrequency = ath9k_hw_fbin2freq(*pCalPier, is2GHz);
|
|
*pcorrection = pCalPierStruct->refPower;
|
|
*ptemperature = pCalPierStruct->tempMeas;
|
|
*pvoltage = pCalPierStruct->voltMeas;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ar9003_hw_power_control_override(struct ath_hw *ah,
|
|
int frequency,
|
|
int *correction,
|
|
int *voltage, int *temperature)
|
|
{
|
|
int tempSlope = 0;
|
|
struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
|
|
int f[3], t[3];
|
|
|
|
REG_RMW(ah, AR_PHY_TPC_11_B0,
|
|
(correction[0] << AR_PHY_TPC_OLPC_GAIN_DELTA_S),
|
|
AR_PHY_TPC_OLPC_GAIN_DELTA);
|
|
if (ah->caps.tx_chainmask & BIT(1))
|
|
REG_RMW(ah, AR_PHY_TPC_11_B1,
|
|
(correction[1] << AR_PHY_TPC_OLPC_GAIN_DELTA_S),
|
|
AR_PHY_TPC_OLPC_GAIN_DELTA);
|
|
if (ah->caps.tx_chainmask & BIT(2))
|
|
REG_RMW(ah, AR_PHY_TPC_11_B2,
|
|
(correction[2] << AR_PHY_TPC_OLPC_GAIN_DELTA_S),
|
|
AR_PHY_TPC_OLPC_GAIN_DELTA);
|
|
|
|
/* enable open loop power control on chip */
|
|
REG_RMW(ah, AR_PHY_TPC_6_B0,
|
|
(3 << AR_PHY_TPC_6_ERROR_EST_MODE_S),
|
|
AR_PHY_TPC_6_ERROR_EST_MODE);
|
|
if (ah->caps.tx_chainmask & BIT(1))
|
|
REG_RMW(ah, AR_PHY_TPC_6_B1,
|
|
(3 << AR_PHY_TPC_6_ERROR_EST_MODE_S),
|
|
AR_PHY_TPC_6_ERROR_EST_MODE);
|
|
if (ah->caps.tx_chainmask & BIT(2))
|
|
REG_RMW(ah, AR_PHY_TPC_6_B2,
|
|
(3 << AR_PHY_TPC_6_ERROR_EST_MODE_S),
|
|
AR_PHY_TPC_6_ERROR_EST_MODE);
|
|
|
|
/*
|
|
* enable temperature compensation
|
|
* Need to use register names
|
|
*/
|
|
if (frequency < 4000)
|
|
tempSlope = eep->modalHeader2G.tempSlope;
|
|
else if (eep->base_ext2.tempSlopeLow != 0) {
|
|
t[0] = eep->base_ext2.tempSlopeLow;
|
|
f[0] = 5180;
|
|
t[1] = eep->modalHeader5G.tempSlope;
|
|
f[1] = 5500;
|
|
t[2] = eep->base_ext2.tempSlopeHigh;
|
|
f[2] = 5785;
|
|
tempSlope = ar9003_hw_power_interpolate((s32) frequency,
|
|
f, t, 3);
|
|
} else
|
|
tempSlope = eep->modalHeader5G.tempSlope;
|
|
|
|
REG_RMW_FIELD(ah, AR_PHY_TPC_19, AR_PHY_TPC_19_ALPHA_THERM, tempSlope);
|
|
|
|
if (AR_SREV_9462_20(ah))
|
|
REG_RMW_FIELD(ah, AR_PHY_TPC_19_B1,
|
|
AR_PHY_TPC_19_B1_ALPHA_THERM, tempSlope);
|
|
|
|
|
|
REG_RMW_FIELD(ah, AR_PHY_TPC_18, AR_PHY_TPC_18_THERM_CAL_VALUE,
|
|
temperature[0]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Apply the recorded correction values. */
|
|
static int ar9003_hw_calibration_apply(struct ath_hw *ah, int frequency)
|
|
{
|
|
int ichain, ipier, npier;
|
|
int mode;
|
|
int lfrequency[AR9300_MAX_CHAINS],
|
|
lcorrection[AR9300_MAX_CHAINS],
|
|
ltemperature[AR9300_MAX_CHAINS], lvoltage[AR9300_MAX_CHAINS];
|
|
int hfrequency[AR9300_MAX_CHAINS],
|
|
hcorrection[AR9300_MAX_CHAINS],
|
|
htemperature[AR9300_MAX_CHAINS], hvoltage[AR9300_MAX_CHAINS];
|
|
int fdiff;
|
|
int correction[AR9300_MAX_CHAINS],
|
|
voltage[AR9300_MAX_CHAINS], temperature[AR9300_MAX_CHAINS];
|
|
int pfrequency, pcorrection, ptemperature, pvoltage;
|
|
struct ath_common *common = ath9k_hw_common(ah);
|
|
|
|
mode = (frequency >= 4000);
|
|
if (mode)
|
|
npier = AR9300_NUM_5G_CAL_PIERS;
|
|
else
|
|
npier = AR9300_NUM_2G_CAL_PIERS;
|
|
|
|
for (ichain = 0; ichain < AR9300_MAX_CHAINS; ichain++) {
|
|
lfrequency[ichain] = 0;
|
|
hfrequency[ichain] = 100000;
|
|
}
|
|
/* identify best lower and higher frequency calibration measurement */
|
|
for (ichain = 0; ichain < AR9300_MAX_CHAINS; ichain++) {
|
|
for (ipier = 0; ipier < npier; ipier++) {
|
|
if (!ar9003_hw_cal_pier_get(ah, mode, ipier, ichain,
|
|
&pfrequency, &pcorrection,
|
|
&ptemperature, &pvoltage)) {
|
|
fdiff = frequency - pfrequency;
|
|
|
|
/*
|
|
* this measurement is higher than
|
|
* our desired frequency
|
|
*/
|
|
if (fdiff <= 0) {
|
|
if (hfrequency[ichain] <= 0 ||
|
|
hfrequency[ichain] >= 100000 ||
|
|
fdiff >
|
|
(frequency - hfrequency[ichain])) {
|
|
/*
|
|
* new best higher
|
|
* frequency measurement
|
|
*/
|
|
hfrequency[ichain] = pfrequency;
|
|
hcorrection[ichain] =
|
|
pcorrection;
|
|
htemperature[ichain] =
|
|
ptemperature;
|
|
hvoltage[ichain] = pvoltage;
|
|
}
|
|
}
|
|
if (fdiff >= 0) {
|
|
if (lfrequency[ichain] <= 0
|
|
|| fdiff <
|
|
(frequency - lfrequency[ichain])) {
|
|
/*
|
|
* new best lower
|
|
* frequency measurement
|
|
*/
|
|
lfrequency[ichain] = pfrequency;
|
|
lcorrection[ichain] =
|
|
pcorrection;
|
|
ltemperature[ichain] =
|
|
ptemperature;
|
|
lvoltage[ichain] = pvoltage;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/* interpolate */
|
|
for (ichain = 0; ichain < AR9300_MAX_CHAINS; ichain++) {
|
|
ath_dbg(common, EEPROM, "ch=%d f=%d low=%d %d h=%d %d\n",
|
|
ichain, frequency, lfrequency[ichain],
|
|
lcorrection[ichain], hfrequency[ichain],
|
|
hcorrection[ichain]);
|
|
/* they're the same, so just pick one */
|
|
if (hfrequency[ichain] == lfrequency[ichain]) {
|
|
correction[ichain] = lcorrection[ichain];
|
|
voltage[ichain] = lvoltage[ichain];
|
|
temperature[ichain] = ltemperature[ichain];
|
|
}
|
|
/* the low frequency is good */
|
|
else if (frequency - lfrequency[ichain] < 1000) {
|
|
/* so is the high frequency, interpolate */
|
|
if (hfrequency[ichain] - frequency < 1000) {
|
|
|
|
correction[ichain] = interpolate(frequency,
|
|
lfrequency[ichain],
|
|
hfrequency[ichain],
|
|
lcorrection[ichain],
|
|
hcorrection[ichain]);
|
|
|
|
temperature[ichain] = interpolate(frequency,
|
|
lfrequency[ichain],
|
|
hfrequency[ichain],
|
|
ltemperature[ichain],
|
|
htemperature[ichain]);
|
|
|
|
voltage[ichain] = interpolate(frequency,
|
|
lfrequency[ichain],
|
|
hfrequency[ichain],
|
|
lvoltage[ichain],
|
|
hvoltage[ichain]);
|
|
}
|
|
/* only low is good, use it */
|
|
else {
|
|
correction[ichain] = lcorrection[ichain];
|
|
temperature[ichain] = ltemperature[ichain];
|
|
voltage[ichain] = lvoltage[ichain];
|
|
}
|
|
}
|
|
/* only high is good, use it */
|
|
else if (hfrequency[ichain] - frequency < 1000) {
|
|
correction[ichain] = hcorrection[ichain];
|
|
temperature[ichain] = htemperature[ichain];
|
|
voltage[ichain] = hvoltage[ichain];
|
|
} else { /* nothing is good, presume 0???? */
|
|
correction[ichain] = 0;
|
|
temperature[ichain] = 0;
|
|
voltage[ichain] = 0;
|
|
}
|
|
}
|
|
|
|
ar9003_hw_power_control_override(ah, frequency, correction, voltage,
|
|
temperature);
|
|
|
|
ath_dbg(common, EEPROM,
|
|
"for frequency=%d, calibration correction = %d %d %d\n",
|
|
frequency, correction[0], correction[1], correction[2]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u16 ar9003_hw_get_direct_edge_power(struct ar9300_eeprom *eep,
|
|
int idx,
|
|
int edge,
|
|
bool is2GHz)
|
|
{
|
|
struct cal_ctl_data_2g *ctl_2g = eep->ctlPowerData_2G;
|
|
struct cal_ctl_data_5g *ctl_5g = eep->ctlPowerData_5G;
|
|
|
|
if (is2GHz)
|
|
return CTL_EDGE_TPOWER(ctl_2g[idx].ctlEdges[edge]);
|
|
else
|
|
return CTL_EDGE_TPOWER(ctl_5g[idx].ctlEdges[edge]);
|
|
}
|
|
|
|
static u16 ar9003_hw_get_indirect_edge_power(struct ar9300_eeprom *eep,
|
|
int idx,
|
|
unsigned int edge,
|
|
u16 freq,
|
|
bool is2GHz)
|
|
{
|
|
struct cal_ctl_data_2g *ctl_2g = eep->ctlPowerData_2G;
|
|
struct cal_ctl_data_5g *ctl_5g = eep->ctlPowerData_5G;
|
|
|
|
u8 *ctl_freqbin = is2GHz ?
|
|
&eep->ctl_freqbin_2G[idx][0] :
|
|
&eep->ctl_freqbin_5G[idx][0];
|
|
|
|
if (is2GHz) {
|
|
if (ath9k_hw_fbin2freq(ctl_freqbin[edge - 1], 1) < freq &&
|
|
CTL_EDGE_FLAGS(ctl_2g[idx].ctlEdges[edge - 1]))
|
|
return CTL_EDGE_TPOWER(ctl_2g[idx].ctlEdges[edge - 1]);
|
|
} else {
|
|
if (ath9k_hw_fbin2freq(ctl_freqbin[edge - 1], 0) < freq &&
|
|
CTL_EDGE_FLAGS(ctl_5g[idx].ctlEdges[edge - 1]))
|
|
return CTL_EDGE_TPOWER(ctl_5g[idx].ctlEdges[edge - 1]);
|
|
}
|
|
|
|
return MAX_RATE_POWER;
|
|
}
|
|
|
|
/*
|
|
* Find the maximum conformance test limit for the given channel and CTL info
|
|
*/
|
|
static u16 ar9003_hw_get_max_edge_power(struct ar9300_eeprom *eep,
|
|
u16 freq, int idx, bool is2GHz)
|
|
{
|
|
u16 twiceMaxEdgePower = MAX_RATE_POWER;
|
|
u8 *ctl_freqbin = is2GHz ?
|
|
&eep->ctl_freqbin_2G[idx][0] :
|
|
&eep->ctl_freqbin_5G[idx][0];
|
|
u16 num_edges = is2GHz ?
|
|
AR9300_NUM_BAND_EDGES_2G : AR9300_NUM_BAND_EDGES_5G;
|
|
unsigned int edge;
|
|
|
|
/* Get the edge power */
|
|
for (edge = 0;
|
|
(edge < num_edges) && (ctl_freqbin[edge] != AR5416_BCHAN_UNUSED);
|
|
edge++) {
|
|
/*
|
|
* If there's an exact channel match or an inband flag set
|
|
* on the lower channel use the given rdEdgePower
|
|
*/
|
|
if (freq == ath9k_hw_fbin2freq(ctl_freqbin[edge], is2GHz)) {
|
|
twiceMaxEdgePower =
|
|
ar9003_hw_get_direct_edge_power(eep, idx,
|
|
edge, is2GHz);
|
|
break;
|
|
} else if ((edge > 0) &&
|
|
(freq < ath9k_hw_fbin2freq(ctl_freqbin[edge],
|
|
is2GHz))) {
|
|
twiceMaxEdgePower =
|
|
ar9003_hw_get_indirect_edge_power(eep, idx,
|
|
edge, freq,
|
|
is2GHz);
|
|
/*
|
|
* Leave loop - no more affecting edges possible in
|
|
* this monotonic increasing list
|
|
*/
|
|
break;
|
|
}
|
|
}
|
|
return twiceMaxEdgePower;
|
|
}
|
|
|
|
static void ar9003_hw_set_power_per_rate_table(struct ath_hw *ah,
|
|
struct ath9k_channel *chan,
|
|
u8 *pPwrArray, u16 cfgCtl,
|
|
u8 antenna_reduction,
|
|
u16 powerLimit)
|
|
{
|
|
struct ath_common *common = ath9k_hw_common(ah);
|
|
struct ar9300_eeprom *pEepData = &ah->eeprom.ar9300_eep;
|
|
u16 twiceMaxEdgePower;
|
|
int i;
|
|
u16 scaledPower = 0, minCtlPower;
|
|
static const u16 ctlModesFor11a[] = {
|
|
CTL_11A, CTL_5GHT20, CTL_11A_EXT, CTL_5GHT40
|
|
};
|
|
static const u16 ctlModesFor11g[] = {
|
|
CTL_11B, CTL_11G, CTL_2GHT20, CTL_11B_EXT,
|
|
CTL_11G_EXT, CTL_2GHT40
|
|
};
|
|
u16 numCtlModes;
|
|
const u16 *pCtlMode;
|
|
u16 ctlMode, freq;
|
|
struct chan_centers centers;
|
|
u8 *ctlIndex;
|
|
u8 ctlNum;
|
|
u16 twiceMinEdgePower;
|
|
bool is2ghz = IS_CHAN_2GHZ(chan);
|
|
|
|
ath9k_hw_get_channel_centers(ah, chan, ¢ers);
|
|
scaledPower = ath9k_hw_get_scaled_power(ah, powerLimit,
|
|
antenna_reduction);
|
|
|
|
if (is2ghz) {
|
|
/* Setup for CTL modes */
|
|
/* CTL_11B, CTL_11G, CTL_2GHT20 */
|
|
numCtlModes =
|
|
ARRAY_SIZE(ctlModesFor11g) -
|
|
SUB_NUM_CTL_MODES_AT_2G_40;
|
|
pCtlMode = ctlModesFor11g;
|
|
if (IS_CHAN_HT40(chan))
|
|
/* All 2G CTL's */
|
|
numCtlModes = ARRAY_SIZE(ctlModesFor11g);
|
|
} else {
|
|
/* Setup for CTL modes */
|
|
/* CTL_11A, CTL_5GHT20 */
|
|
numCtlModes = ARRAY_SIZE(ctlModesFor11a) -
|
|
SUB_NUM_CTL_MODES_AT_5G_40;
|
|
pCtlMode = ctlModesFor11a;
|
|
if (IS_CHAN_HT40(chan))
|
|
/* All 5G CTL's */
|
|
numCtlModes = ARRAY_SIZE(ctlModesFor11a);
|
|
}
|
|
|
|
/*
|
|
* For MIMO, need to apply regulatory caps individually across
|
|
* dynamically running modes: CCK, OFDM, HT20, HT40
|
|
*
|
|
* The outer loop walks through each possible applicable runtime mode.
|
|
* The inner loop walks through each ctlIndex entry in EEPROM.
|
|
* The ctl value is encoded as [7:4] == test group, [3:0] == test mode.
|
|
*/
|
|
for (ctlMode = 0; ctlMode < numCtlModes; ctlMode++) {
|
|
bool isHt40CtlMode = (pCtlMode[ctlMode] == CTL_5GHT40) ||
|
|
(pCtlMode[ctlMode] == CTL_2GHT40);
|
|
if (isHt40CtlMode)
|
|
freq = centers.synth_center;
|
|
else if (pCtlMode[ctlMode] & EXT_ADDITIVE)
|
|
freq = centers.ext_center;
|
|
else
|
|
freq = centers.ctl_center;
|
|
|
|
ath_dbg(common, REGULATORY,
|
|
"LOOP-Mode ctlMode %d < %d, isHt40CtlMode %d, EXT_ADDITIVE %d\n",
|
|
ctlMode, numCtlModes, isHt40CtlMode,
|
|
(pCtlMode[ctlMode] & EXT_ADDITIVE));
|
|
|
|
/* walk through each CTL index stored in EEPROM */
|
|
if (is2ghz) {
|
|
ctlIndex = pEepData->ctlIndex_2G;
|
|
ctlNum = AR9300_NUM_CTLS_2G;
|
|
} else {
|
|
ctlIndex = pEepData->ctlIndex_5G;
|
|
ctlNum = AR9300_NUM_CTLS_5G;
|
|
}
|
|
|
|
twiceMaxEdgePower = MAX_RATE_POWER;
|
|
for (i = 0; (i < ctlNum) && ctlIndex[i]; i++) {
|
|
ath_dbg(common, REGULATORY,
|
|
"LOOP-Ctlidx %d: cfgCtl 0x%2.2x pCtlMode 0x%2.2x ctlIndex 0x%2.2x chan %d\n",
|
|
i, cfgCtl, pCtlMode[ctlMode], ctlIndex[i],
|
|
chan->channel);
|
|
|
|
/*
|
|
* compare test group from regulatory
|
|
* channel list with test mode from pCtlMode
|
|
* list
|
|
*/
|
|
if ((((cfgCtl & ~CTL_MODE_M) |
|
|
(pCtlMode[ctlMode] & CTL_MODE_M)) ==
|
|
ctlIndex[i]) ||
|
|
(((cfgCtl & ~CTL_MODE_M) |
|
|
(pCtlMode[ctlMode] & CTL_MODE_M)) ==
|
|
((ctlIndex[i] & CTL_MODE_M) |
|
|
SD_NO_CTL))) {
|
|
twiceMinEdgePower =
|
|
ar9003_hw_get_max_edge_power(pEepData,
|
|
freq, i,
|
|
is2ghz);
|
|
|
|
if ((cfgCtl & ~CTL_MODE_M) == SD_NO_CTL)
|
|
/*
|
|
* Find the minimum of all CTL
|
|
* edge powers that apply to
|
|
* this channel
|
|
*/
|
|
twiceMaxEdgePower =
|
|
min(twiceMaxEdgePower,
|
|
twiceMinEdgePower);
|
|
else {
|
|
/* specific */
|
|
twiceMaxEdgePower =
|
|
twiceMinEdgePower;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
minCtlPower = (u8)min(twiceMaxEdgePower, scaledPower);
|
|
|
|
ath_dbg(common, REGULATORY,
|
|
"SEL-Min ctlMode %d pCtlMode %d 2xMaxEdge %d sP %d minCtlPwr %d\n",
|
|
ctlMode, pCtlMode[ctlMode], twiceMaxEdgePower,
|
|
scaledPower, minCtlPower);
|
|
|
|
/* Apply ctl mode to correct target power set */
|
|
switch (pCtlMode[ctlMode]) {
|
|
case CTL_11B:
|
|
for (i = ALL_TARGET_LEGACY_1L_5L;
|
|
i <= ALL_TARGET_LEGACY_11S; i++)
|
|
pPwrArray[i] =
|
|
(u8)min((u16)pPwrArray[i],
|
|
minCtlPower);
|
|
break;
|
|
case CTL_11A:
|
|
case CTL_11G:
|
|
for (i = ALL_TARGET_LEGACY_6_24;
|
|
i <= ALL_TARGET_LEGACY_54; i++)
|
|
pPwrArray[i] =
|
|
(u8)min((u16)pPwrArray[i],
|
|
minCtlPower);
|
|
break;
|
|
case CTL_5GHT20:
|
|
case CTL_2GHT20:
|
|
for (i = ALL_TARGET_HT20_0_8_16;
|
|
i <= ALL_TARGET_HT20_21; i++)
|
|
pPwrArray[i] =
|
|
(u8)min((u16)pPwrArray[i],
|
|
minCtlPower);
|
|
pPwrArray[ALL_TARGET_HT20_22] =
|
|
(u8)min((u16)pPwrArray[ALL_TARGET_HT20_22],
|
|
minCtlPower);
|
|
pPwrArray[ALL_TARGET_HT20_23] =
|
|
(u8)min((u16)pPwrArray[ALL_TARGET_HT20_23],
|
|
minCtlPower);
|
|
break;
|
|
case CTL_5GHT40:
|
|
case CTL_2GHT40:
|
|
for (i = ALL_TARGET_HT40_0_8_16;
|
|
i <= ALL_TARGET_HT40_23; i++)
|
|
pPwrArray[i] =
|
|
(u8)min((u16)pPwrArray[i],
|
|
minCtlPower);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
} /* end ctl mode checking */
|
|
}
|
|
|
|
static inline u8 mcsidx_to_tgtpwridx(unsigned int mcs_idx, u8 base_pwridx)
|
|
{
|
|
u8 mod_idx = mcs_idx % 8;
|
|
|
|
if (mod_idx <= 3)
|
|
return mod_idx ? (base_pwridx + 1) : base_pwridx;
|
|
else
|
|
return base_pwridx + 4 * (mcs_idx / 8) + mod_idx - 2;
|
|
}
|
|
|
|
static void ath9k_hw_ar9300_set_txpower(struct ath_hw *ah,
|
|
struct ath9k_channel *chan, u16 cfgCtl,
|
|
u8 twiceAntennaReduction,
|
|
u8 powerLimit, bool test)
|
|
{
|
|
struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
|
|
struct ath_common *common = ath9k_hw_common(ah);
|
|
struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
|
|
struct ar9300_modal_eep_header *modal_hdr;
|
|
u8 targetPowerValT2[ar9300RateSize];
|
|
u8 target_power_val_t2_eep[ar9300RateSize];
|
|
unsigned int i = 0, paprd_scale_factor = 0;
|
|
u8 pwr_idx, min_pwridx = 0;
|
|
|
|
memset(targetPowerValT2, 0 , sizeof(targetPowerValT2));
|
|
|
|
/*
|
|
* Get target powers from EEPROM - our baseline for TX Power
|
|
*/
|
|
ar9003_hw_get_target_power_eeprom(ah, chan, targetPowerValT2);
|
|
|
|
if (ah->eep_ops->get_eeprom(ah, EEP_PAPRD)) {
|
|
if (IS_CHAN_2GHZ(chan))
|
|
modal_hdr = &eep->modalHeader2G;
|
|
else
|
|
modal_hdr = &eep->modalHeader5G;
|
|
|
|
ah->paprd_ratemask =
|
|
le32_to_cpu(modal_hdr->papdRateMaskHt20) &
|
|
AR9300_PAPRD_RATE_MASK;
|
|
|
|
ah->paprd_ratemask_ht40 =
|
|
le32_to_cpu(modal_hdr->papdRateMaskHt40) &
|
|
AR9300_PAPRD_RATE_MASK;
|
|
|
|
paprd_scale_factor = ar9003_get_paprd_scale_factor(ah, chan);
|
|
min_pwridx = IS_CHAN_HT40(chan) ? ALL_TARGET_HT40_0_8_16 :
|
|
ALL_TARGET_HT20_0_8_16;
|
|
|
|
if (!ah->paprd_table_write_done) {
|
|
memcpy(target_power_val_t2_eep, targetPowerValT2,
|
|
sizeof(targetPowerValT2));
|
|
for (i = 0; i < 24; i++) {
|
|
pwr_idx = mcsidx_to_tgtpwridx(i, min_pwridx);
|
|
if (ah->paprd_ratemask & (1 << i)) {
|
|
if (targetPowerValT2[pwr_idx] &&
|
|
targetPowerValT2[pwr_idx] ==
|
|
target_power_val_t2_eep[pwr_idx])
|
|
targetPowerValT2[pwr_idx] -=
|
|
paprd_scale_factor;
|
|
}
|
|
}
|
|
}
|
|
memcpy(target_power_val_t2_eep, targetPowerValT2,
|
|
sizeof(targetPowerValT2));
|
|
}
|
|
|
|
ar9003_hw_set_power_per_rate_table(ah, chan,
|
|
targetPowerValT2, cfgCtl,
|
|
twiceAntennaReduction,
|
|
powerLimit);
|
|
|
|
if (ah->eep_ops->get_eeprom(ah, EEP_PAPRD)) {
|
|
for (i = 0; i < ar9300RateSize; i++) {
|
|
if ((ah->paprd_ratemask & (1 << i)) &&
|
|
(abs(targetPowerValT2[i] -
|
|
target_power_val_t2_eep[i]) >
|
|
paprd_scale_factor)) {
|
|
ah->paprd_ratemask &= ~(1 << i);
|
|
ath_dbg(common, EEPROM,
|
|
"paprd disabled for mcs %d\n", i);
|
|
}
|
|
}
|
|
}
|
|
|
|
regulatory->max_power_level = 0;
|
|
for (i = 0; i < ar9300RateSize; i++) {
|
|
if (targetPowerValT2[i] > regulatory->max_power_level)
|
|
regulatory->max_power_level = targetPowerValT2[i];
|
|
}
|
|
|
|
ath9k_hw_update_regulatory_maxpower(ah);
|
|
|
|
if (test)
|
|
return;
|
|
|
|
for (i = 0; i < ar9300RateSize; i++) {
|
|
ath_dbg(common, EEPROM, "TPC[%02d] 0x%08x\n",
|
|
i, targetPowerValT2[i]);
|
|
}
|
|
|
|
/* Write target power array to registers */
|
|
ar9003_hw_tx_power_regwrite(ah, targetPowerValT2);
|
|
ar9003_hw_calibration_apply(ah, chan->channel);
|
|
|
|
if (IS_CHAN_2GHZ(chan)) {
|
|
if (IS_CHAN_HT40(chan))
|
|
i = ALL_TARGET_HT40_0_8_16;
|
|
else
|
|
i = ALL_TARGET_HT20_0_8_16;
|
|
} else {
|
|
if (IS_CHAN_HT40(chan))
|
|
i = ALL_TARGET_HT40_7;
|
|
else
|
|
i = ALL_TARGET_HT20_7;
|
|
}
|
|
ah->paprd_target_power = targetPowerValT2[i];
|
|
}
|
|
|
|
static u16 ath9k_hw_ar9300_get_spur_channel(struct ath_hw *ah,
|
|
u16 i, bool is2GHz)
|
|
{
|
|
return AR_NO_SPUR;
|
|
}
|
|
|
|
s32 ar9003_hw_get_tx_gain_idx(struct ath_hw *ah)
|
|
{
|
|
struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
|
|
|
|
return (eep->baseEepHeader.txrxgain >> 4) & 0xf; /* bits 7:4 */
|
|
}
|
|
|
|
s32 ar9003_hw_get_rx_gain_idx(struct ath_hw *ah)
|
|
{
|
|
struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
|
|
|
|
return (eep->baseEepHeader.txrxgain) & 0xf; /* bits 3:0 */
|
|
}
|
|
|
|
u8 *ar9003_get_spur_chan_ptr(struct ath_hw *ah, bool is_2ghz)
|
|
{
|
|
struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
|
|
|
|
if (is_2ghz)
|
|
return eep->modalHeader2G.spurChans;
|
|
else
|
|
return eep->modalHeader5G.spurChans;
|
|
}
|
|
|
|
unsigned int ar9003_get_paprd_scale_factor(struct ath_hw *ah,
|
|
struct ath9k_channel *chan)
|
|
{
|
|
struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
|
|
|
|
if (IS_CHAN_2GHZ(chan))
|
|
return MS(le32_to_cpu(eep->modalHeader2G.papdRateMaskHt20),
|
|
AR9300_PAPRD_SCALE_1);
|
|
else {
|
|
if (chan->channel >= 5700)
|
|
return MS(le32_to_cpu(eep->modalHeader5G.papdRateMaskHt20),
|
|
AR9300_PAPRD_SCALE_1);
|
|
else if (chan->channel >= 5400)
|
|
return MS(le32_to_cpu(eep->modalHeader5G.papdRateMaskHt40),
|
|
AR9300_PAPRD_SCALE_2);
|
|
else
|
|
return MS(le32_to_cpu(eep->modalHeader5G.papdRateMaskHt40),
|
|
AR9300_PAPRD_SCALE_1);
|
|
}
|
|
}
|
|
|
|
const struct eeprom_ops eep_ar9300_ops = {
|
|
.check_eeprom = ath9k_hw_ar9300_check_eeprom,
|
|
.get_eeprom = ath9k_hw_ar9300_get_eeprom,
|
|
.fill_eeprom = ath9k_hw_ar9300_fill_eeprom,
|
|
.dump_eeprom = ath9k_hw_ar9003_dump_eeprom,
|
|
.get_eeprom_ver = ath9k_hw_ar9300_get_eeprom_ver,
|
|
.get_eeprom_rev = ath9k_hw_ar9300_get_eeprom_rev,
|
|
.set_board_values = ath9k_hw_ar9300_set_board_values,
|
|
.set_addac = ath9k_hw_ar9300_set_addac,
|
|
.set_txpower = ath9k_hw_ar9300_set_txpower,
|
|
.get_spur_channel = ath9k_hw_ar9300_get_spur_channel
|
|
};
|