2654 lines
68 KiB
C
2654 lines
68 KiB
C
/* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 and
|
|
* only version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/spmi.h>
|
|
#include <linux/err.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/of.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/power_supply.h>
|
|
#include <linux/qpnp/qpnp-adc.h>
|
|
#include <linux/qpnp/qpnp-revid.h>
|
|
#include "leds.h"
|
|
#include <linux/debugfs.h>
|
|
#include <linux/uaccess.h>
|
|
|
|
#define FLASH_LED_PERIPHERAL_SUBTYPE(base) (base + 0x05)
|
|
#define FLASH_SAFETY_TIMER(base) (base + 0x40)
|
|
#define FLASH_MAX_CURRENT(base) (base + 0x41)
|
|
#define FLASH_LED0_CURRENT(base) (base + 0x42)
|
|
#define FLASH_LED1_CURRENT(base) (base + 0x43)
|
|
#define FLASH_CLAMP_CURRENT(base) (base + 0x44)
|
|
#define FLASH_MODULE_ENABLE_CTRL(base) (base + 0x46)
|
|
#define FLASH_LED_STROBE_CTRL(base) (base + 0x47)
|
|
#define FLASH_LED_TMR_CTRL(base) (base + 0x48)
|
|
#define FLASH_HEADROOM(base) (base + 0x4A)
|
|
#define FLASH_STARTUP_DELAY(base) (base + 0x4B)
|
|
#define FLASH_MASK_ENABLE(base) (base + 0x4C)
|
|
#define FLASH_VREG_OK_FORCE(base) (base + 0x4F)
|
|
#define FLASH_FAULT_DETECT(base) (base + 0x51)
|
|
#define FLASH_THERMAL_DRATE(base) (base + 0x52)
|
|
#define FLASH_CURRENT_RAMP(base) (base + 0x54)
|
|
#define FLASH_VPH_PWR_DROOP(base) (base + 0x5A)
|
|
#define FLASH_HDRM_SNS_ENABLE_CTRL0(base) (base + 0x5C)
|
|
#define FLASH_HDRM_SNS_ENABLE_CTRL1(base) (base + 0x5D)
|
|
#define FLASH_LED_UNLOCK_SECURE(base) (base + 0xD0)
|
|
#define FLASH_PERPH_RESET_CTRL(base) (base + 0xDA)
|
|
#define FLASH_TORCH(base) (base + 0xE4)
|
|
|
|
#define FLASH_STATUS_REG_MASK 0xFF
|
|
#define FLASH_LED_FAULT_STATUS(base) (base + 0x08)
|
|
#define INT_LATCHED_STS(base) (base + 0x18)
|
|
#define IN_POLARITY_HIGH(base) (base + 0x12)
|
|
#define INT_SET_TYPE(base) (base + 0x11)
|
|
#define INT_EN_SET(base) (base + 0x15)
|
|
#define INT_LATCHED_CLR(base) (base + 0x14)
|
|
|
|
#define FLASH_HEADROOM_MASK 0x03
|
|
#define FLASH_STARTUP_DLY_MASK 0x03
|
|
#define FLASH_VREG_OK_FORCE_MASK 0xC0
|
|
#define FLASH_FAULT_DETECT_MASK 0x80
|
|
#define FLASH_THERMAL_DERATE_MASK 0xBF
|
|
#define FLASH_SECURE_MASK 0xFF
|
|
#define FLASH_TORCH_MASK 0x03
|
|
#define FLASH_CURRENT_MASK 0x7F
|
|
#define FLASH_TMR_MASK 0x03
|
|
#define FLASH_TMR_SAFETY 0x00
|
|
#define FLASH_SAFETY_TIMER_MASK 0x7F
|
|
#define FLASH_MODULE_ENABLE_MASK 0xE0
|
|
#define FLASH_STROBE_MASK 0xC0
|
|
#define FLASH_CURRENT_RAMP_MASK 0xBF
|
|
#define FLASH_VPH_PWR_DROOP_MASK 0xF3
|
|
#define FLASH_LED_HDRM_SNS_ENABLE_MASK 0x81
|
|
#define FLASH_MASK_MODULE_CONTRL_MASK 0xE0
|
|
#define FLASH_FOLLOW_OTST2_RB_MASK 0x08
|
|
|
|
#define FLASH_LED_TRIGGER_DEFAULT "none"
|
|
#define FLASH_LED_HEADROOM_DEFAULT_MV 500
|
|
#define FLASH_LED_STARTUP_DELAY_DEFAULT_US 128
|
|
#define FLASH_LED_CLAMP_CURRENT_DEFAULT_MA 200
|
|
#define FLASH_LED_THERMAL_DERATE_THRESHOLD_DEFAULT_C 80
|
|
#define FLASH_LED_RAMP_UP_STEP_DEFAULT_US 3
|
|
#define FLASH_LED_RAMP_DN_STEP_DEFAULT_US 3
|
|
#define FLASH_LED_VPH_PWR_DROOP_THRESHOLD_DEFAULT_MV 3200
|
|
#define FLASH_LED_VPH_PWR_DROOP_DEBOUNCE_TIME_DEFAULT_US 10
|
|
#define FLASH_LED_THERMAL_DERATE_RATE_DEFAULT_PERCENT 2
|
|
#define FLASH_RAMP_UP_DELAY_US_MIN 1000
|
|
#define FLASH_RAMP_UP_DELAY_US_MAX 1001
|
|
#define FLASH_RAMP_DN_DELAY_US_MIN 2160
|
|
#define FLASH_RAMP_DN_DELAY_US_MAX 2161
|
|
#define FLASH_BOOST_REGULATOR_PROBE_DELAY_MS 2000
|
|
#define FLASH_TORCH_MAX_LEVEL 0x0F
|
|
#define FLASH_MAX_LEVEL 0x4F
|
|
#define FLASH_LED_FLASH_HW_VREG_OK 0x40
|
|
#define FLASH_LED_FLASH_SW_VREG_OK 0x80
|
|
#define FLASH_LED_STROBE_TYPE_HW 0x04
|
|
#define FLASH_DURATION_DIVIDER 10
|
|
#define FLASH_LED_HEADROOM_DIVIDER 100
|
|
#define FLASH_LED_HEADROOM_OFFSET 2
|
|
#define FLASH_LED_MAX_CURRENT_MA 1000
|
|
#define FLASH_LED_THERMAL_THRESHOLD_MIN 95
|
|
#define FLASH_LED_THERMAL_DEVIDER 10
|
|
#define FLASH_LED_VPH_DROOP_THRESHOLD_MIN_MV 2500
|
|
#define FLASH_LED_VPH_DROOP_THRESHOLD_DIVIDER 100
|
|
#define FLASH_LED_HDRM_SNS_ENABLE 0x81
|
|
#define FLASH_LED_HDRM_SNS_DISABLE 0x01
|
|
#define FLASH_LED_UA_PER_MA 1000
|
|
#define FLASH_LED_MASK_MODULE_MASK2_ENABLE 0x20
|
|
#define FLASH_LED_MASK3_ENABLE_SHIFT 7
|
|
#define FLASH_LED_MODULE_CTRL_DEFAULT 0x60
|
|
#define FLASH_LED_CURRENT_READING_DELAY_MIN 5000
|
|
#define FLASH_LED_CURRENT_READING_DELAY_MAX 5001
|
|
#define PMI8996_SUBTYPE 19
|
|
#define FLASH_LED_OPEN_FAULT_DETECTED 0xC
|
|
|
|
#define FLASH_UNLOCK_SECURE 0xA5
|
|
#define FLASH_LED_TORCH_ENABLE 0x00
|
|
#define FLASH_LED_TORCH_DISABLE 0x03
|
|
#define FLASH_MODULE_ENABLE 0x80
|
|
#define FLASH_LED0_TRIGGER 0x80
|
|
#define FLASH_LED1_TRIGGER 0x40
|
|
#define FLASH_LED0_ENABLEMENT 0x40
|
|
#define FLASH_LED1_ENABLEMENT 0x20
|
|
#define FLASH_LED_DISABLE 0x00
|
|
#define FLASH_LED_MIN_CURRENT_MA 13
|
|
#define FLASH_SUBTYPE_DUAL 0x01
|
|
#define FLASH_SUBTYPE_SINGLE 0x02
|
|
|
|
/*
|
|
* ID represents physical LEDs for individual control purpose.
|
|
*/
|
|
enum flash_led_id {
|
|
FLASH_LED_0 = 0,
|
|
FLASH_LED_1,
|
|
FLASH_LED_SWITCH,
|
|
};
|
|
|
|
enum flash_led_type {
|
|
FLASH = 0,
|
|
TORCH,
|
|
SWITCH,
|
|
};
|
|
|
|
enum thermal_derate_rate {
|
|
RATE_1_PERCENT = 0,
|
|
RATE_1P25_PERCENT,
|
|
RATE_2_PERCENT,
|
|
RATE_2P5_PERCENT,
|
|
RATE_5_PERCENT,
|
|
};
|
|
|
|
enum current_ramp_steps {
|
|
RAMP_STEP_0P2_US = 0,
|
|
RAMP_STEP_0P4_US,
|
|
RAMP_STEP_0P8_US,
|
|
RAMP_STEP_1P6_US,
|
|
RAMP_STEP_3P3_US,
|
|
RAMP_STEP_6P7_US,
|
|
RAMP_STEP_13P5_US,
|
|
RAMP_STEP_27US,
|
|
};
|
|
|
|
struct flash_regulator_data {
|
|
struct regulator *regs;
|
|
const char *reg_name;
|
|
u32 max_volt_uv;
|
|
};
|
|
|
|
/*
|
|
* Configurations for each individual LED
|
|
*/
|
|
struct flash_node_data {
|
|
struct spmi_device *spmi_dev;
|
|
struct led_classdev cdev;
|
|
struct work_struct work;
|
|
struct flash_regulator_data *reg_data;
|
|
u16 max_current;
|
|
u16 prgm_current;
|
|
u16 prgm_current2;
|
|
u16 duration;
|
|
u8 id;
|
|
u8 type;
|
|
u8 trigger;
|
|
u8 enable;
|
|
u8 num_regulators;
|
|
bool flash_on;
|
|
};
|
|
|
|
/*
|
|
* Flash LED configuration read from device tree
|
|
*/
|
|
struct flash_led_platform_data {
|
|
unsigned int temp_threshold_num;
|
|
unsigned int temp_derate_curr_num;
|
|
unsigned int *die_temp_derate_curr_ma;
|
|
unsigned int *die_temp_threshold_degc;
|
|
u16 ramp_up_step;
|
|
u16 ramp_dn_step;
|
|
u16 vph_pwr_droop_threshold;
|
|
u16 headroom;
|
|
u16 clamp_current;
|
|
u8 thermal_derate_threshold;
|
|
u8 vph_pwr_droop_debounce_time;
|
|
u8 startup_dly;
|
|
u8 thermal_derate_rate;
|
|
bool pmic_charger_support;
|
|
bool self_check_en;
|
|
bool thermal_derate_en;
|
|
bool current_ramp_en;
|
|
bool vph_pwr_droop_en;
|
|
bool hdrm_sns_ch0_en;
|
|
bool hdrm_sns_ch1_en;
|
|
bool power_detect_en;
|
|
bool mask3_en;
|
|
bool follow_rb_disable;
|
|
bool die_current_derate_en;
|
|
};
|
|
|
|
struct qpnp_flash_led_buffer {
|
|
size_t rpos;
|
|
size_t wpos;
|
|
size_t len;
|
|
char data[0];
|
|
};
|
|
|
|
/*
|
|
* Flash LED data structure containing flash LED attributes
|
|
*/
|
|
struct qpnp_flash_led {
|
|
struct pmic_revid_data *revid_data;
|
|
struct spmi_device *spmi_dev;
|
|
struct flash_led_platform_data *pdata;
|
|
struct pinctrl *pinctrl;
|
|
struct pinctrl_state *gpio_state_active;
|
|
struct pinctrl_state *gpio_state_suspend;
|
|
struct flash_node_data *flash_node;
|
|
struct power_supply *battery_psy;
|
|
struct workqueue_struct *ordered_workq;
|
|
struct qpnp_vadc_chip *vadc_dev;
|
|
struct mutex flash_led_lock;
|
|
struct qpnp_flash_led_buffer *log;
|
|
struct dentry *dbgfs_root;
|
|
int num_leds;
|
|
u32 buffer_cnt;
|
|
u16 base;
|
|
u16 current_addr;
|
|
u16 current2_addr;
|
|
u8 peripheral_type;
|
|
u8 fault_reg;
|
|
bool gpio_enabled;
|
|
bool charging_enabled;
|
|
bool strobe_debug;
|
|
bool dbg_feature_en;
|
|
bool open_fault;
|
|
};
|
|
|
|
static u8 qpnp_flash_led_ctrl_dbg_regs[] = {
|
|
0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48,
|
|
0x4A, 0x4B, 0x4C, 0x4F, 0x51, 0x52, 0x54, 0x55, 0x5A, 0x5C, 0x5D,
|
|
};
|
|
|
|
static int flash_led_dbgfs_file_open(struct qpnp_flash_led *led,
|
|
struct file *file)
|
|
{
|
|
struct qpnp_flash_led_buffer *log;
|
|
size_t logbufsize = SZ_4K;
|
|
|
|
log = kzalloc(logbufsize, GFP_KERNEL);
|
|
if (!log)
|
|
return -ENOMEM;
|
|
|
|
log->rpos = 0;
|
|
log->wpos = 0;
|
|
log->len = logbufsize - sizeof(*log);
|
|
led->log = log;
|
|
|
|
led->buffer_cnt = 1;
|
|
file->private_data = led;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int flash_led_dfs_open(struct inode *inode, struct file *file)
|
|
{
|
|
struct qpnp_flash_led *led = inode->i_private;
|
|
|
|
return flash_led_dbgfs_file_open(led, file);
|
|
}
|
|
|
|
static int flash_led_dfs_close(struct inode *inode, struct file *file)
|
|
{
|
|
struct qpnp_flash_led *led = file->private_data;
|
|
|
|
if (led && led->log) {
|
|
file->private_data = NULL;
|
|
kfree(led->log);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int print_to_log(struct qpnp_flash_led_buffer *log,
|
|
const char *fmt, ...)
|
|
{
|
|
va_list args;
|
|
int cnt;
|
|
char *log_buf = &log->data[log->wpos];
|
|
size_t size = log->len - log->wpos;
|
|
|
|
va_start(args, fmt);
|
|
cnt = vscnprintf(log_buf, size, fmt, args);
|
|
va_end(args);
|
|
|
|
log->wpos += cnt;
|
|
return cnt;
|
|
}
|
|
|
|
static ssize_t flash_led_dfs_latched_reg_read(struct file *fp, char __user *buf,
|
|
size_t count, loff_t *ppos) {
|
|
struct qpnp_flash_led *led = fp->private_data;
|
|
struct qpnp_flash_led_buffer *log = led->log;
|
|
u8 val;
|
|
int rc;
|
|
size_t len;
|
|
size_t ret;
|
|
|
|
if (log->rpos >= log->wpos && led->buffer_cnt == 0)
|
|
return 0;
|
|
|
|
rc = spmi_ext_register_readl(led->spmi_dev->ctrl,
|
|
led->spmi_dev->sid, INT_LATCHED_STS(led->base), &val, 1);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Unable to read from address %x, rc(%d)\n",
|
|
INT_LATCHED_STS(led->base), rc);
|
|
return -EINVAL;
|
|
}
|
|
led->buffer_cnt--;
|
|
|
|
rc = print_to_log(log, "0x%05X ", INT_LATCHED_STS(led->base));
|
|
if (rc == 0)
|
|
return rc;
|
|
|
|
rc = print_to_log(log, "0x%02X ", val);
|
|
if (rc == 0)
|
|
return rc;
|
|
|
|
if (log->wpos > 0 && log->data[log->wpos - 1] == ' ')
|
|
log->data[log->wpos - 1] = '\n';
|
|
|
|
len = min(count, log->wpos - log->rpos);
|
|
|
|
ret = copy_to_user(buf, &log->data[log->rpos], len);
|
|
if (ret) {
|
|
pr_err("error copy register value to user\n");
|
|
return -EFAULT;
|
|
}
|
|
|
|
len -= ret;
|
|
*ppos += len;
|
|
log->rpos += len;
|
|
|
|
return len;
|
|
}
|
|
|
|
static ssize_t flash_led_dfs_fault_reg_read(struct file *fp, char __user *buf,
|
|
size_t count, loff_t *ppos) {
|
|
struct qpnp_flash_led *led = fp->private_data;
|
|
struct qpnp_flash_led_buffer *log = led->log;
|
|
int rc;
|
|
size_t len;
|
|
size_t ret;
|
|
|
|
if (log->rpos >= log->wpos && led->buffer_cnt == 0)
|
|
return 0;
|
|
|
|
led->buffer_cnt--;
|
|
|
|
rc = print_to_log(log, "0x%05X ", FLASH_LED_FAULT_STATUS(led->base));
|
|
if (rc == 0)
|
|
return rc;
|
|
|
|
rc = print_to_log(log, "0x%02X ", led->fault_reg);
|
|
if (rc == 0)
|
|
return rc;
|
|
|
|
if (log->wpos > 0 && log->data[log->wpos - 1] == ' ')
|
|
log->data[log->wpos - 1] = '\n';
|
|
|
|
len = min(count, log->wpos - log->rpos);
|
|
|
|
ret = copy_to_user(buf, &log->data[log->rpos], len);
|
|
if (ret) {
|
|
pr_err("error copy register value to user\n");
|
|
return -EFAULT;
|
|
}
|
|
|
|
len -= ret;
|
|
*ppos += len;
|
|
log->rpos += len;
|
|
|
|
return len;
|
|
}
|
|
|
|
static ssize_t flash_led_dfs_fault_reg_enable(struct file *file,
|
|
const char __user *buf, size_t count, loff_t *ppos) {
|
|
|
|
u8 *val;
|
|
int pos = 0;
|
|
int cnt = 0;
|
|
int data;
|
|
size_t ret = 0;
|
|
|
|
struct qpnp_flash_led *led = file->private_data;
|
|
char *kbuf = kmalloc(count + 1, GFP_KERNEL);
|
|
|
|
if (!kbuf)
|
|
return -ENOMEM;
|
|
|
|
ret = copy_from_user(kbuf, buf, count);
|
|
if (!ret) {
|
|
pr_err("failed to copy data from user\n");
|
|
ret = -EFAULT;
|
|
goto free_buf;
|
|
}
|
|
|
|
count -= ret;
|
|
*ppos += count;
|
|
kbuf[count] = '\0';
|
|
val = kbuf;
|
|
while (sscanf(kbuf + pos, "%i", &data) == 1) {
|
|
pos++;
|
|
val[cnt++] = data & 0xff;
|
|
}
|
|
|
|
if (!cnt)
|
|
goto free_buf;
|
|
|
|
ret = count;
|
|
if (*val == 1)
|
|
led->strobe_debug = true;
|
|
else
|
|
led->strobe_debug = false;
|
|
|
|
free_buf:
|
|
kfree(kbuf);
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t flash_led_dfs_dbg_enable(struct file *file,
|
|
const char __user *buf, size_t count, loff_t *ppos) {
|
|
|
|
u8 *val;
|
|
int pos = 0;
|
|
int cnt = 0;
|
|
int data;
|
|
size_t ret = 0;
|
|
struct qpnp_flash_led *led = file->private_data;
|
|
char *kbuf = kmalloc(count + 1, GFP_KERNEL);
|
|
|
|
if (!kbuf)
|
|
return -ENOMEM;
|
|
|
|
ret = copy_from_user(kbuf, buf, count);
|
|
if (ret == count) {
|
|
pr_err("failed to copy data from user\n");
|
|
ret = -EFAULT;
|
|
goto free_buf;
|
|
}
|
|
count -= ret;
|
|
*ppos += count;
|
|
kbuf[count] = '\0';
|
|
val = kbuf;
|
|
while (sscanf(kbuf + pos, "%i", &data) == 1) {
|
|
pos++;
|
|
val[cnt++] = data & 0xff;
|
|
}
|
|
|
|
if (!cnt)
|
|
goto free_buf;
|
|
|
|
ret = count;
|
|
if (*val == 1)
|
|
led->dbg_feature_en = true;
|
|
else
|
|
led->dbg_feature_en = false;
|
|
|
|
free_buf:
|
|
kfree(kbuf);
|
|
return ret;
|
|
}
|
|
|
|
static const struct file_operations flash_led_dfs_latched_reg_fops = {
|
|
.open = flash_led_dfs_open,
|
|
.release = flash_led_dfs_close,
|
|
.read = flash_led_dfs_latched_reg_read,
|
|
};
|
|
|
|
static const struct file_operations flash_led_dfs_strobe_reg_fops = {
|
|
.open = flash_led_dfs_open,
|
|
.release = flash_led_dfs_close,
|
|
.read = flash_led_dfs_fault_reg_read,
|
|
.write = flash_led_dfs_fault_reg_enable,
|
|
};
|
|
|
|
static const struct file_operations flash_led_dfs_dbg_feature_fops = {
|
|
.open = flash_led_dfs_open,
|
|
.release = flash_led_dfs_close,
|
|
.write = flash_led_dfs_dbg_enable,
|
|
};
|
|
|
|
static int
|
|
qpnp_led_masked_write(struct spmi_device *spmi_dev, u16 addr, u8 mask, u8 val)
|
|
{
|
|
int rc;
|
|
u8 reg;
|
|
|
|
rc = spmi_ext_register_readl(spmi_dev->ctrl, spmi_dev->sid,
|
|
addr, ®, 1);
|
|
if (rc)
|
|
dev_err(&spmi_dev->dev,
|
|
"Unable to read from addr=%x, rc(%d)\n", addr, rc);
|
|
|
|
reg &= ~mask;
|
|
reg |= val;
|
|
|
|
rc = spmi_ext_register_writel(spmi_dev->ctrl, spmi_dev->sid,
|
|
addr, ®, 1);
|
|
if (rc)
|
|
dev_err(&spmi_dev->dev,
|
|
"Unable to write to addr=%x, rc(%d)\n", addr, rc);
|
|
|
|
dev_dbg(&spmi_dev->dev, "Write 0x%02X to addr 0x%02X\n", val, addr);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int qpnp_flash_led_get_allowed_die_temp_curr(struct qpnp_flash_led *led,
|
|
int64_t die_temp_degc)
|
|
{
|
|
int die_temp_curr_ma;
|
|
|
|
if (die_temp_degc >= led->pdata->die_temp_threshold_degc[0])
|
|
die_temp_curr_ma = 0;
|
|
else if (die_temp_degc >= led->pdata->die_temp_threshold_degc[1])
|
|
die_temp_curr_ma = led->pdata->die_temp_derate_curr_ma[0];
|
|
else if (die_temp_degc >= led->pdata->die_temp_threshold_degc[2])
|
|
die_temp_curr_ma = led->pdata->die_temp_derate_curr_ma[1];
|
|
else if (die_temp_degc >= led->pdata->die_temp_threshold_degc[3])
|
|
die_temp_curr_ma = led->pdata->die_temp_derate_curr_ma[2];
|
|
else if (die_temp_degc >= led->pdata->die_temp_threshold_degc[4])
|
|
die_temp_curr_ma = led->pdata->die_temp_derate_curr_ma[3];
|
|
else
|
|
die_temp_curr_ma = led->pdata->die_temp_derate_curr_ma[4];
|
|
|
|
return die_temp_curr_ma;
|
|
}
|
|
|
|
static int64_t qpnp_flash_led_get_die_temp(struct qpnp_flash_led *led)
|
|
{
|
|
struct qpnp_vadc_result die_temp_result;
|
|
int rc;
|
|
|
|
rc = qpnp_vadc_read(led->vadc_dev, SPARE2, &die_temp_result);
|
|
if (rc) {
|
|
pr_err("failed to read the die temp\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return die_temp_result.physical;
|
|
}
|
|
|
|
static int qpnp_get_pmic_revid(struct qpnp_flash_led *led)
|
|
{
|
|
struct device_node *revid_dev_node;
|
|
|
|
revid_dev_node = of_parse_phandle(led->spmi_dev->dev.of_node,
|
|
"qcom,pmic-revid", 0);
|
|
if (!revid_dev_node) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"qcom,pmic-revid property missing\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
led->revid_data = get_revid_data(revid_dev_node);
|
|
if (IS_ERR(led->revid_data)) {
|
|
pr_err("Couldn't get revid data rc = %ld\n",
|
|
PTR_ERR(led->revid_data));
|
|
return PTR_ERR(led->revid_data);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
qpnp_flash_led_get_max_avail_current(struct flash_node_data *flash_node,
|
|
struct qpnp_flash_led *led)
|
|
{
|
|
union power_supply_propval prop;
|
|
int64_t chg_temp_milidegc, die_temp_degc;
|
|
int max_curr_avail_ma = 2000;
|
|
int allowed_die_temp_curr_ma = 2000;
|
|
int rc;
|
|
|
|
if (led->pdata->power_detect_en) {
|
|
if (!led->battery_psy) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Failed to query power supply\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* When charging is enabled, enforce this new
|
|
* enabelment sequence to reduce fuel gauge
|
|
* resolution reading.
|
|
*/
|
|
if (led->charging_enabled) {
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
FLASH_MODULE_ENABLE_CTRL(led->base),
|
|
FLASH_MODULE_ENABLE, FLASH_MODULE_ENABLE);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Module enable reg write failed\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
usleep_range(FLASH_LED_CURRENT_READING_DELAY_MIN,
|
|
FLASH_LED_CURRENT_READING_DELAY_MAX);
|
|
}
|
|
|
|
led->battery_psy->get_property(led->battery_psy,
|
|
POWER_SUPPLY_PROP_FLASH_CURRENT_MAX, &prop);
|
|
if (!prop.intval) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"battery too low for flash\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
max_curr_avail_ma = (prop.intval / FLASH_LED_UA_PER_MA);
|
|
}
|
|
|
|
/* When thermal mitigation is available, this logic
|
|
* will execute, to derate current based on PMIC die
|
|
* temperature.
|
|
*/
|
|
if (led->pdata->die_current_derate_en) {
|
|
chg_temp_milidegc = qpnp_flash_led_get_die_temp(led);
|
|
if (chg_temp_milidegc < 0)
|
|
return -EINVAL;
|
|
|
|
die_temp_degc = div_s64(chg_temp_milidegc, 1000);
|
|
allowed_die_temp_curr_ma =
|
|
qpnp_flash_led_get_allowed_die_temp_curr(led,
|
|
die_temp_degc);
|
|
if (allowed_die_temp_curr_ma < 0)
|
|
return -EINVAL;
|
|
}
|
|
|
|
max_curr_avail_ma = (max_curr_avail_ma >= allowed_die_temp_curr_ma)
|
|
? allowed_die_temp_curr_ma : max_curr_avail_ma;
|
|
|
|
return max_curr_avail_ma;
|
|
}
|
|
|
|
static ssize_t qpnp_flash_led_die_temp_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct qpnp_flash_led *led;
|
|
struct flash_node_data *flash_node;
|
|
unsigned long val;
|
|
struct led_classdev *led_cdev = dev_get_drvdata(dev);
|
|
ssize_t ret;
|
|
|
|
ret = kstrtoul(buf, 10, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
flash_node = container_of(led_cdev, struct flash_node_data, cdev);
|
|
led = dev_get_drvdata(&flash_node->spmi_dev->dev);
|
|
|
|
/*'0' for disable die_temp feature; non-zero to enable feature*/
|
|
if (val == 0)
|
|
led->pdata->die_current_derate_en = false;
|
|
else
|
|
led->pdata->die_current_derate_en = true;
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t qpnp_led_strobe_type_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct flash_node_data *flash_node;
|
|
unsigned long state;
|
|
struct led_classdev *led_cdev = dev_get_drvdata(dev);
|
|
ssize_t ret = -EINVAL;
|
|
|
|
ret = kstrtoul(buf, 10, &state);
|
|
if (ret)
|
|
return ret;
|
|
|
|
flash_node = container_of(led_cdev, struct flash_node_data, cdev);
|
|
|
|
/* '0' for sw strobe; '1' for hw strobe */
|
|
if (state == 1)
|
|
flash_node->trigger |= FLASH_LED_STROBE_TYPE_HW;
|
|
else
|
|
flash_node->trigger &= ~FLASH_LED_STROBE_TYPE_HW;
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t qpnp_flash_led_dump_regs_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct qpnp_flash_led *led;
|
|
struct flash_node_data *flash_node;
|
|
struct led_classdev *led_cdev = dev_get_drvdata(dev);
|
|
int rc, i, count = 0;
|
|
u16 addr;
|
|
u8 val;
|
|
|
|
flash_node = container_of(led_cdev, struct flash_node_data, cdev);
|
|
led = dev_get_drvdata(&flash_node->spmi_dev->dev);
|
|
for (i = 0; i < ARRAY_SIZE(qpnp_flash_led_ctrl_dbg_regs); i++) {
|
|
addr = led->base + qpnp_flash_led_ctrl_dbg_regs[i];
|
|
rc = spmi_ext_register_readl(led->spmi_dev->ctrl,
|
|
led->spmi_dev->sid, addr, &val, 1);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Unable to read from addr=%x, rc(%d)\n",
|
|
addr, rc);
|
|
return -EINVAL;
|
|
}
|
|
|
|
count += snprintf(buf + count, PAGE_SIZE - count,
|
|
"REG_0x%x = 0x%x\n", addr, val);
|
|
|
|
if (count >= PAGE_SIZE)
|
|
return PAGE_SIZE - 1;
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t qpnp_flash_led_current_derate_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct qpnp_flash_led *led;
|
|
struct flash_node_data *flash_node;
|
|
unsigned long val;
|
|
struct led_classdev *led_cdev = dev_get_drvdata(dev);
|
|
ssize_t ret;
|
|
|
|
ret = kstrtoul(buf, 10, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
flash_node = container_of(led_cdev, struct flash_node_data, cdev);
|
|
led = dev_get_drvdata(&flash_node->spmi_dev->dev);
|
|
|
|
/*'0' for disable derate feature; non-zero to enable derate feature */
|
|
if (val == 0)
|
|
led->pdata->power_detect_en = false;
|
|
else
|
|
led->pdata->power_detect_en = true;
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t qpnp_flash_led_max_current_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct qpnp_flash_led *led;
|
|
struct flash_node_data *flash_node;
|
|
struct led_classdev *led_cdev = dev_get_drvdata(dev);
|
|
int max_curr_avail_ma = 0;
|
|
|
|
flash_node = container_of(led_cdev, struct flash_node_data, cdev);
|
|
led = dev_get_drvdata(&flash_node->spmi_dev->dev);
|
|
|
|
if (led->flash_node[0].flash_on)
|
|
max_curr_avail_ma += led->flash_node[0].max_current;
|
|
if (led->flash_node[1].flash_on)
|
|
max_curr_avail_ma += led->flash_node[1].max_current;
|
|
|
|
if (led->pdata->power_detect_en ||
|
|
led->pdata->die_current_derate_en) {
|
|
max_curr_avail_ma =
|
|
qpnp_flash_led_get_max_avail_current(flash_node, led);
|
|
|
|
if (max_curr_avail_ma < 0)
|
|
return -EINVAL;
|
|
}
|
|
|
|
return snprintf(buf, PAGE_SIZE, "%u\n", max_curr_avail_ma);
|
|
}
|
|
|
|
static struct device_attribute qpnp_flash_led_attrs[] = {
|
|
__ATTR(strobe, (S_IRUGO | S_IWUSR | S_IWGRP),
|
|
NULL,
|
|
qpnp_led_strobe_type_store),
|
|
__ATTR(reg_dump, (S_IRUGO | S_IWUSR | S_IWGRP),
|
|
qpnp_flash_led_dump_regs_show,
|
|
NULL),
|
|
__ATTR(enable_current_derate, (S_IRUGO | S_IWUSR | S_IWGRP),
|
|
NULL,
|
|
qpnp_flash_led_current_derate_store),
|
|
__ATTR(max_allowed_current, (S_IRUGO | S_IWUSR | S_IWGRP),
|
|
qpnp_flash_led_max_current_show,
|
|
NULL),
|
|
__ATTR(enable_die_temp_current_derate, (S_IRUGO | S_IWUSR | S_IWGRP),
|
|
NULL,
|
|
qpnp_flash_led_die_temp_store),
|
|
};
|
|
|
|
static int qpnp_flash_led_get_thermal_derate_rate(const char *rate)
|
|
{
|
|
/*
|
|
* return 5% derate as default value if user specifies
|
|
* a value un-supported
|
|
*/
|
|
if (strcmp(rate, "1_PERCENT") == 0)
|
|
return RATE_1_PERCENT;
|
|
else if (strcmp(rate, "1P25_PERCENT") == 0)
|
|
return RATE_1P25_PERCENT;
|
|
else if (strcmp(rate, "2_PERCENT") == 0)
|
|
return RATE_2_PERCENT;
|
|
else if (strcmp(rate, "2P5_PERCENT") == 0)
|
|
return RATE_2P5_PERCENT;
|
|
else if (strcmp(rate, "5_PERCENT") == 0)
|
|
return RATE_5_PERCENT;
|
|
else
|
|
return RATE_5_PERCENT;
|
|
}
|
|
|
|
static int qpnp_flash_led_get_ramp_step(const char *step)
|
|
{
|
|
/*
|
|
* return 27 us as default value if user specifies
|
|
* a value un-supported
|
|
*/
|
|
if (strcmp(step, "0P2_US") == 0)
|
|
return RAMP_STEP_0P2_US;
|
|
else if (strcmp(step, "0P4_US") == 0)
|
|
return RAMP_STEP_0P4_US;
|
|
else if (strcmp(step, "0P8_US") == 0)
|
|
return RAMP_STEP_0P8_US;
|
|
else if (strcmp(step, "1P6_US") == 0)
|
|
return RAMP_STEP_1P6_US;
|
|
else if (strcmp(step, "3P3_US") == 0)
|
|
return RAMP_STEP_3P3_US;
|
|
else if (strcmp(step, "6P7_US") == 0)
|
|
return RAMP_STEP_6P7_US;
|
|
else if (strcmp(step, "13P5_US") == 0)
|
|
return RAMP_STEP_13P5_US;
|
|
else
|
|
return RAMP_STEP_27US;
|
|
}
|
|
|
|
static u8 qpnp_flash_led_get_droop_debounce_time(u8 val)
|
|
{
|
|
/*
|
|
* return 10 us as default value if user specifies
|
|
* a value un-supported
|
|
*/
|
|
switch (val) {
|
|
case 0:
|
|
return 0;
|
|
case 10:
|
|
return 1;
|
|
case 32:
|
|
return 2;
|
|
case 64:
|
|
return 3;
|
|
default:
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
static u8 qpnp_flash_led_get_startup_dly(u8 val)
|
|
{
|
|
/*
|
|
* return 128 us as default value if user specifies
|
|
* a value un-supported
|
|
*/
|
|
switch (val) {
|
|
case 10:
|
|
return 0;
|
|
case 32:
|
|
return 1;
|
|
case 64:
|
|
return 2;
|
|
case 128:
|
|
return 3;
|
|
default:
|
|
return 3;
|
|
}
|
|
}
|
|
|
|
static int
|
|
qpnp_flash_led_get_peripheral_type(struct qpnp_flash_led *led)
|
|
{
|
|
int rc;
|
|
u8 val;
|
|
|
|
rc = spmi_ext_register_readl(led->spmi_dev->ctrl,
|
|
led->spmi_dev->sid,
|
|
FLASH_LED_PERIPHERAL_SUBTYPE(led->base),
|
|
&val, 1);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Unable to read peripheral subtype\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return val;
|
|
}
|
|
|
|
static int qpnp_flash_led_module_disable(struct qpnp_flash_led *led,
|
|
struct flash_node_data *flash_node)
|
|
{
|
|
union power_supply_propval psy_prop;
|
|
int rc;
|
|
u8 val, tmp;
|
|
|
|
rc = spmi_ext_register_readl(led->spmi_dev->ctrl,
|
|
led->spmi_dev->sid,
|
|
FLASH_LED_STROBE_CTRL(led->base),
|
|
&val, 1);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Unable to read strobe reg\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
tmp = (~flash_node->trigger) & val;
|
|
if (!tmp) {
|
|
if (flash_node->type == TORCH) {
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
FLASH_LED_UNLOCK_SECURE(led->base),
|
|
FLASH_SECURE_MASK, FLASH_UNLOCK_SECURE);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Secure reg write failed\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
FLASH_TORCH(led->base),
|
|
FLASH_TORCH_MASK, FLASH_LED_TORCH_DISABLE);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Torch reg write failed\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
if (led->battery_psy &&
|
|
led->revid_data->pmic_subtype == PMI8996_SUBTYPE &&
|
|
!led->revid_data->rev3) {
|
|
psy_prop.intval = false;
|
|
rc = led->battery_psy->set_property(led->battery_psy,
|
|
POWER_SUPPLY_PROP_FLASH_TRIGGER,
|
|
&psy_prop);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Failed to enble charger i/p current limit\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
FLASH_MODULE_ENABLE_CTRL(led->base),
|
|
FLASH_MODULE_ENABLE_MASK,
|
|
FLASH_LED_MODULE_CTRL_DEFAULT);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Module disable failed\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (led->pinctrl) {
|
|
rc = pinctrl_select_state(led->pinctrl,
|
|
led->gpio_state_suspend);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"failed to disable GPIO\n");
|
|
return -EINVAL;
|
|
}
|
|
led->gpio_enabled = false;
|
|
}
|
|
|
|
if (led->battery_psy) {
|
|
psy_prop.intval = false;
|
|
rc = led->battery_psy->set_property(led->battery_psy,
|
|
POWER_SUPPLY_PROP_FLASH_ACTIVE,
|
|
&psy_prop);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Failed to setup OTG pulse skip enable\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (flash_node->trigger & FLASH_LED0_TRIGGER) {
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
led->current_addr,
|
|
FLASH_CURRENT_MASK, 0x00);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"current register write failed\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
}
|
|
|
|
if (flash_node->trigger & FLASH_LED1_TRIGGER) {
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
led->current2_addr,
|
|
FLASH_CURRENT_MASK, 0x00);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"current register write failed\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
if (flash_node->id == FLASH_LED_SWITCH)
|
|
flash_node->trigger &= FLASH_LED_STROBE_TYPE_HW;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static enum
|
|
led_brightness qpnp_flash_led_brightness_get(struct led_classdev *led_cdev)
|
|
{
|
|
return led_cdev->brightness;
|
|
}
|
|
|
|
static int flash_regulator_parse_dt(struct qpnp_flash_led *led,
|
|
struct flash_node_data *flash_node) {
|
|
|
|
int i = 0, rc;
|
|
struct device_node *node = flash_node->cdev.dev->of_node;
|
|
struct device_node *temp = NULL;
|
|
const char *temp_string;
|
|
u32 val;
|
|
|
|
flash_node->reg_data = devm_kzalloc(&led->spmi_dev->dev,
|
|
sizeof(struct flash_regulator_data *) *
|
|
flash_node->num_regulators,
|
|
GFP_KERNEL);
|
|
if (!flash_node->reg_data) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Unable to allocate memory\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
for_each_child_of_node(node, temp) {
|
|
rc = of_property_read_string(temp, "regulator-name",
|
|
&temp_string);
|
|
if (!rc)
|
|
flash_node->reg_data[i].reg_name = temp_string;
|
|
else {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Unable to read regulator name\n");
|
|
return rc;
|
|
}
|
|
|
|
rc = of_property_read_u32(temp, "max-voltage", &val);
|
|
if (!rc) {
|
|
flash_node->reg_data[i].max_volt_uv = val;
|
|
} else if (rc != -EINVAL) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Unable to read max voltage\n");
|
|
return rc;
|
|
}
|
|
|
|
i++;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int flash_regulator_setup(struct qpnp_flash_led *led,
|
|
struct flash_node_data *flash_node, bool on)
|
|
{
|
|
int i, rc = 0;
|
|
|
|
if (on == false) {
|
|
i = flash_node->num_regulators;
|
|
goto error_regulator_setup;
|
|
}
|
|
|
|
for (i = 0; i < flash_node->num_regulators; i++) {
|
|
flash_node->reg_data[i].regs =
|
|
regulator_get(flash_node->cdev.dev,
|
|
flash_node->reg_data[i].reg_name);
|
|
if (IS_ERR(flash_node->reg_data[i].regs)) {
|
|
rc = PTR_ERR(flash_node->reg_data[i].regs);
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Failed to get regulator\n");
|
|
goto error_regulator_setup;
|
|
}
|
|
|
|
if (regulator_count_voltages(flash_node->reg_data[i].regs)
|
|
> 0) {
|
|
rc = regulator_set_voltage(flash_node->reg_data[i].regs,
|
|
flash_node->reg_data[i].max_volt_uv,
|
|
flash_node->reg_data[i].max_volt_uv);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"regulator set voltage failed\n");
|
|
regulator_put(flash_node->reg_data[i].regs);
|
|
goto error_regulator_setup;
|
|
}
|
|
}
|
|
}
|
|
|
|
return rc;
|
|
|
|
error_regulator_setup:
|
|
while (i--) {
|
|
if (regulator_count_voltages(flash_node->reg_data[i].regs)
|
|
> 0) {
|
|
regulator_set_voltage(flash_node->reg_data[i].regs,
|
|
0, flash_node->reg_data[i].max_volt_uv);
|
|
}
|
|
|
|
regulator_put(flash_node->reg_data[i].regs);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int flash_regulator_enable(struct qpnp_flash_led *led,
|
|
struct flash_node_data *flash_node, bool on)
|
|
{
|
|
int i, rc = 0;
|
|
|
|
if (on == false) {
|
|
i = flash_node->num_regulators;
|
|
goto error_regulator_enable;
|
|
}
|
|
|
|
for (i = 0; i < flash_node->num_regulators; i++) {
|
|
rc = regulator_enable(flash_node->reg_data[i].regs);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"regulator enable failed\n");
|
|
goto error_regulator_enable;
|
|
}
|
|
}
|
|
|
|
return rc;
|
|
|
|
error_regulator_enable:
|
|
while (i--)
|
|
regulator_disable(flash_node->reg_data[i].regs);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void qpnp_flash_led_work(struct work_struct *work)
|
|
{
|
|
struct flash_node_data *flash_node = container_of(work,
|
|
struct flash_node_data, work);
|
|
struct qpnp_flash_led *led =
|
|
dev_get_drvdata(&flash_node->spmi_dev->dev);
|
|
union power_supply_propval psy_prop;
|
|
int rc, brightness = flash_node->cdev.brightness;
|
|
int max_curr_avail_ma = 0;
|
|
int total_curr_ma = 0;
|
|
int i;
|
|
u8 val;
|
|
|
|
mutex_lock(&led->flash_led_lock);
|
|
|
|
if (!brightness)
|
|
goto turn_off;
|
|
|
|
if (led->open_fault) {
|
|
dev_err(&led->spmi_dev->dev, "Open fault detected\n");
|
|
mutex_unlock(&led->flash_led_lock);
|
|
return;
|
|
}
|
|
|
|
if (!flash_node->flash_on && flash_node->num_regulators > 0) {
|
|
rc = flash_regulator_enable(led, flash_node, true);
|
|
if (rc) {
|
|
mutex_unlock(&led->flash_led_lock);
|
|
return;
|
|
}
|
|
}
|
|
|
|
if (!led->gpio_enabled && led->pinctrl) {
|
|
rc = pinctrl_select_state(led->pinctrl,
|
|
led->gpio_state_active);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"failed to enable GPIO\n");
|
|
goto error_enable_gpio;
|
|
}
|
|
led->gpio_enabled = true;
|
|
}
|
|
|
|
if (led->dbg_feature_en) {
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
INT_SET_TYPE(led->base),
|
|
FLASH_STATUS_REG_MASK, 0x1F);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"INT_SET_TYPE write failed\n");
|
|
goto exit_flash_led_work;
|
|
}
|
|
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
IN_POLARITY_HIGH(led->base),
|
|
FLASH_STATUS_REG_MASK, 0x1F);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"IN_POLARITY_HIGH write failed\n");
|
|
goto exit_flash_led_work;
|
|
}
|
|
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
INT_EN_SET(led->base),
|
|
FLASH_STATUS_REG_MASK, 0x1F);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"INT_EN_SET write failed\n");
|
|
goto exit_flash_led_work;
|
|
}
|
|
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
INT_LATCHED_CLR(led->base),
|
|
FLASH_STATUS_REG_MASK, 0x1F);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"INT_LATCHED_CLR write failed\n");
|
|
goto exit_flash_led_work;
|
|
}
|
|
}
|
|
|
|
if (flash_node->type == TORCH) {
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
FLASH_LED_UNLOCK_SECURE(led->base),
|
|
FLASH_SECURE_MASK, FLASH_UNLOCK_SECURE);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Secure reg write failed\n");
|
|
goto exit_flash_led_work;
|
|
}
|
|
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
FLASH_TORCH(led->base),
|
|
FLASH_TORCH_MASK, FLASH_LED_TORCH_ENABLE);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Torch reg write failed\n");
|
|
goto exit_flash_led_work;
|
|
}
|
|
|
|
if (flash_node->id == FLASH_LED_SWITCH) {
|
|
val = (u8)(flash_node->prgm_current *
|
|
FLASH_TORCH_MAX_LEVEL
|
|
/ flash_node->max_current);
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
led->current_addr,
|
|
FLASH_CURRENT_MASK, val);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Torch reg write failed\n");
|
|
goto exit_flash_led_work;
|
|
}
|
|
|
|
val = (u8)(flash_node->prgm_current2 *
|
|
FLASH_TORCH_MAX_LEVEL
|
|
/ flash_node->max_current);
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
led->current2_addr,
|
|
FLASH_CURRENT_MASK, val);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Torch reg write failed\n");
|
|
goto exit_flash_led_work;
|
|
}
|
|
} else {
|
|
val = (u8)(flash_node->prgm_current *
|
|
FLASH_TORCH_MAX_LEVEL /
|
|
flash_node->max_current);
|
|
if (flash_node->id == FLASH_LED_0) {
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
led->current_addr,
|
|
FLASH_CURRENT_MASK, val);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"current reg write failed\n");
|
|
goto exit_flash_led_work;
|
|
}
|
|
} else {
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
led->current2_addr,
|
|
FLASH_CURRENT_MASK, val);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"current reg write failed\n");
|
|
goto exit_flash_led_work;
|
|
}
|
|
}
|
|
}
|
|
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
FLASH_MAX_CURRENT(led->base),
|
|
FLASH_CURRENT_MASK, FLASH_TORCH_MAX_LEVEL);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Max current reg write failed\n");
|
|
goto exit_flash_led_work;
|
|
}
|
|
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
FLASH_MODULE_ENABLE_CTRL(led->base),
|
|
FLASH_MODULE_ENABLE_MASK, FLASH_MODULE_ENABLE);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Module enable reg write failed\n");
|
|
goto exit_flash_led_work;
|
|
}
|
|
|
|
if (led->pdata->hdrm_sns_ch0_en ||
|
|
led->pdata->hdrm_sns_ch1_en) {
|
|
if (flash_node->id == FLASH_LED_SWITCH) {
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
FLASH_HDRM_SNS_ENABLE_CTRL0(led->base),
|
|
FLASH_LED_HDRM_SNS_ENABLE_MASK,
|
|
flash_node->trigger &
|
|
FLASH_LED0_TRIGGER ?
|
|
FLASH_LED_HDRM_SNS_ENABLE :
|
|
FLASH_LED_HDRM_SNS_DISABLE);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Headroom sense enable failed\n");
|
|
goto exit_flash_led_work;
|
|
}
|
|
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
FLASH_HDRM_SNS_ENABLE_CTRL1(led->base),
|
|
FLASH_LED_HDRM_SNS_ENABLE_MASK,
|
|
flash_node->trigger &
|
|
FLASH_LED1_TRIGGER ?
|
|
FLASH_LED_HDRM_SNS_ENABLE :
|
|
FLASH_LED_HDRM_SNS_DISABLE);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Headroom sense enable failed\n");
|
|
goto exit_flash_led_work;
|
|
}
|
|
} else if (flash_node->id == FLASH_LED_0) {
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
FLASH_HDRM_SNS_ENABLE_CTRL0(led->base),
|
|
FLASH_LED_HDRM_SNS_ENABLE_MASK,
|
|
FLASH_LED_HDRM_SNS_ENABLE);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Headroom sense disable failed\n");
|
|
goto exit_flash_led_work;
|
|
}
|
|
} else if (flash_node->id == FLASH_LED_1) {
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
FLASH_HDRM_SNS_ENABLE_CTRL1(led->base),
|
|
FLASH_LED_HDRM_SNS_ENABLE_MASK,
|
|
FLASH_LED_HDRM_SNS_ENABLE);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Headroom sense disable failed\n");
|
|
goto exit_flash_led_work;
|
|
}
|
|
}
|
|
}
|
|
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
FLASH_LED_STROBE_CTRL(led->base),
|
|
(flash_node->id == FLASH_LED_SWITCH ? FLASH_STROBE_MASK
|
|
| FLASH_LED_STROBE_TYPE_HW
|
|
: flash_node->trigger |
|
|
FLASH_LED_STROBE_TYPE_HW),
|
|
flash_node->trigger);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Strobe reg write failed\n");
|
|
goto exit_flash_led_work;
|
|
}
|
|
} else if (flash_node->type == FLASH) {
|
|
if (flash_node->trigger & FLASH_LED0_TRIGGER)
|
|
max_curr_avail_ma += flash_node->max_current;
|
|
if (flash_node->trigger & FLASH_LED1_TRIGGER)
|
|
max_curr_avail_ma += flash_node->max_current;
|
|
|
|
psy_prop.intval = true;
|
|
rc = led->battery_psy->set_property(led->battery_psy,
|
|
POWER_SUPPLY_PROP_FLASH_ACTIVE,
|
|
&psy_prop);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Failed to setup OTG pulse skip enable\n");
|
|
goto exit_flash_led_work;
|
|
}
|
|
|
|
if (led->pdata->power_detect_en ||
|
|
led->pdata->die_current_derate_en) {
|
|
if (led->battery_psy) {
|
|
led->battery_psy->get_property(led->battery_psy,
|
|
POWER_SUPPLY_PROP_STATUS,
|
|
&psy_prop);
|
|
if (psy_prop.intval < 0) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Invalid battery status\n");
|
|
goto exit_flash_led_work;
|
|
}
|
|
|
|
if (psy_prop.intval ==
|
|
POWER_SUPPLY_STATUS_CHARGING)
|
|
led->charging_enabled = true;
|
|
else if (psy_prop.intval ==
|
|
POWER_SUPPLY_STATUS_DISCHARGING
|
|
|| psy_prop.intval ==
|
|
POWER_SUPPLY_STATUS_NOT_CHARGING)
|
|
led->charging_enabled = false;
|
|
}
|
|
max_curr_avail_ma =
|
|
qpnp_flash_led_get_max_avail_current
|
|
(flash_node, led);
|
|
if (max_curr_avail_ma < 0) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Failed to get max avail curr\n");
|
|
goto exit_flash_led_work;
|
|
}
|
|
}
|
|
|
|
if (flash_node->id == FLASH_LED_SWITCH) {
|
|
if (flash_node->trigger & FLASH_LED0_TRIGGER)
|
|
total_curr_ma += flash_node->prgm_current;
|
|
if (flash_node->trigger & FLASH_LED1_TRIGGER)
|
|
total_curr_ma += flash_node->prgm_current2;
|
|
|
|
if (max_curr_avail_ma < total_curr_ma) {
|
|
flash_node->prgm_current =
|
|
(flash_node->prgm_current *
|
|
max_curr_avail_ma) / total_curr_ma;
|
|
flash_node->prgm_current2 =
|
|
(flash_node->prgm_current2 *
|
|
max_curr_avail_ma) / total_curr_ma;
|
|
}
|
|
|
|
val = (u8)(flash_node->prgm_current *
|
|
FLASH_MAX_LEVEL / flash_node->max_current);
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
led->current_addr, FLASH_CURRENT_MASK, val);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Current register write failed\n");
|
|
goto exit_flash_led_work;
|
|
}
|
|
|
|
val = (u8)(flash_node->prgm_current2 *
|
|
FLASH_MAX_LEVEL / flash_node->max_current);
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
led->current2_addr, FLASH_CURRENT_MASK, val);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Current register write failed\n");
|
|
goto exit_flash_led_work;
|
|
}
|
|
} else {
|
|
if (max_curr_avail_ma <
|
|
flash_node->prgm_current) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"battery only supprots %d mA\n",
|
|
max_curr_avail_ma);
|
|
flash_node->prgm_current =
|
|
(u16)max_curr_avail_ma;
|
|
}
|
|
|
|
val = (u8)(flash_node->prgm_current *
|
|
FLASH_MAX_LEVEL
|
|
/ flash_node->max_current);
|
|
if (flash_node->id == FLASH_LED_0) {
|
|
rc = qpnp_led_masked_write(
|
|
led->spmi_dev,
|
|
led->current_addr,
|
|
FLASH_CURRENT_MASK, val);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"current reg write failed\n");
|
|
goto exit_flash_led_work;
|
|
}
|
|
} else if (flash_node->id == FLASH_LED_1) {
|
|
rc = qpnp_led_masked_write(
|
|
led->spmi_dev,
|
|
led->current2_addr,
|
|
FLASH_CURRENT_MASK, val);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"current reg write failed\n");
|
|
goto exit_flash_led_work;
|
|
}
|
|
}
|
|
}
|
|
|
|
val = (u8)((flash_node->duration - FLASH_DURATION_DIVIDER)
|
|
/ FLASH_DURATION_DIVIDER);
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
FLASH_SAFETY_TIMER(led->base),
|
|
FLASH_SAFETY_TIMER_MASK, val);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Safety timer reg write failed\n");
|
|
goto exit_flash_led_work;
|
|
}
|
|
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
FLASH_MAX_CURRENT(led->base),
|
|
FLASH_CURRENT_MASK, FLASH_MAX_LEVEL);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Max current reg write failed\n");
|
|
goto exit_flash_led_work;
|
|
}
|
|
|
|
if (!led->charging_enabled) {
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
FLASH_MODULE_ENABLE_CTRL(led->base),
|
|
FLASH_MODULE_ENABLE, FLASH_MODULE_ENABLE);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Module enable reg write failed\n");
|
|
goto exit_flash_led_work;
|
|
}
|
|
|
|
usleep_range(FLASH_RAMP_UP_DELAY_US_MIN,
|
|
FLASH_RAMP_UP_DELAY_US_MAX);
|
|
}
|
|
|
|
if (led->revid_data->pmic_subtype == PMI8996_SUBTYPE &&
|
|
!led->revid_data->rev3) {
|
|
rc = led->battery_psy->set_property(led->battery_psy,
|
|
POWER_SUPPLY_PROP_FLASH_TRIGGER,
|
|
&psy_prop);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Failed to disable charger i/p curr limit\n");
|
|
goto exit_flash_led_work;
|
|
}
|
|
}
|
|
|
|
if (led->pdata->hdrm_sns_ch0_en ||
|
|
led->pdata->hdrm_sns_ch1_en) {
|
|
if (flash_node->id == FLASH_LED_SWITCH) {
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
FLASH_HDRM_SNS_ENABLE_CTRL0(led->base),
|
|
FLASH_LED_HDRM_SNS_ENABLE_MASK,
|
|
(flash_node->trigger &
|
|
FLASH_LED0_TRIGGER ?
|
|
FLASH_LED_HDRM_SNS_ENABLE :
|
|
FLASH_LED_HDRM_SNS_DISABLE));
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Headroom sense enable failed\n");
|
|
goto exit_flash_led_work;
|
|
}
|
|
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
FLASH_HDRM_SNS_ENABLE_CTRL1(led->base),
|
|
FLASH_LED_HDRM_SNS_ENABLE_MASK,
|
|
(flash_node->trigger &
|
|
FLASH_LED1_TRIGGER ?
|
|
FLASH_LED_HDRM_SNS_ENABLE :
|
|
FLASH_LED_HDRM_SNS_DISABLE));
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Headroom sense enable failed\n");
|
|
goto exit_flash_led_work;
|
|
}
|
|
} else if (flash_node->id == FLASH_LED_0) {
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
FLASH_HDRM_SNS_ENABLE_CTRL0(led->base),
|
|
FLASH_LED_HDRM_SNS_ENABLE_MASK,
|
|
FLASH_LED_HDRM_SNS_ENABLE);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Headroom sense disable failed\n");
|
|
goto exit_flash_led_work;
|
|
}
|
|
} else if (flash_node->id == FLASH_LED_1) {
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
FLASH_HDRM_SNS_ENABLE_CTRL1(led->base),
|
|
FLASH_LED_HDRM_SNS_ENABLE_MASK,
|
|
FLASH_LED_HDRM_SNS_ENABLE);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Headroom sense disable failed\n");
|
|
goto exit_flash_led_work;
|
|
}
|
|
}
|
|
}
|
|
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
FLASH_LED_STROBE_CTRL(led->base),
|
|
(flash_node->id == FLASH_LED_SWITCH ? FLASH_STROBE_MASK
|
|
| FLASH_LED_STROBE_TYPE_HW
|
|
: flash_node->trigger |
|
|
FLASH_LED_STROBE_TYPE_HW),
|
|
flash_node->trigger);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Strobe reg write failed\n");
|
|
goto exit_flash_led_work;
|
|
}
|
|
|
|
if (led->strobe_debug && led->dbg_feature_en) {
|
|
udelay(2000);
|
|
rc = spmi_ext_register_readl(led->spmi_dev->ctrl,
|
|
led->spmi_dev->sid,
|
|
FLASH_LED_FAULT_STATUS(led->base),
|
|
&val, 1);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Unable to read from addr= %x, rc(%d)\n",
|
|
FLASH_LED_FAULT_STATUS(led->base), rc);
|
|
goto exit_flash_led_work;
|
|
}
|
|
led->fault_reg = val;
|
|
}
|
|
} else {
|
|
pr_err("Both Torch and Flash cannot be select at same time\n");
|
|
for (i = 0; i < led->num_leds; i++)
|
|
led->flash_node[i].flash_on = false;
|
|
goto turn_off;
|
|
}
|
|
|
|
flash_node->flash_on = true;
|
|
mutex_unlock(&led->flash_led_lock);
|
|
|
|
return;
|
|
|
|
turn_off:
|
|
if (flash_node->type == TORCH) {
|
|
/*
|
|
* Checking LED fault status detects hardware open fault.
|
|
* If fault occurs, all subsequent LED enablement requests
|
|
* will be rejected to protect hardware.
|
|
*/
|
|
rc = spmi_ext_register_readl(led->spmi_dev->ctrl,
|
|
led->spmi_dev->sid,
|
|
FLASH_LED_FAULT_STATUS(led->base), &val, 1);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Failed to read out fault status register\n");
|
|
goto exit_flash_led_work;
|
|
}
|
|
|
|
led->open_fault = (val & FLASH_LED_OPEN_FAULT_DETECTED);
|
|
}
|
|
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
FLASH_LED_STROBE_CTRL(led->base),
|
|
(flash_node->id == FLASH_LED_SWITCH ? FLASH_STROBE_MASK
|
|
| FLASH_LED_STROBE_TYPE_HW
|
|
: flash_node->trigger
|
|
| FLASH_LED_STROBE_TYPE_HW),
|
|
FLASH_LED_DISABLE);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev, "Strobe disable failed\n");
|
|
goto exit_flash_led_work;
|
|
}
|
|
|
|
usleep_range(FLASH_RAMP_DN_DELAY_US_MIN, FLASH_RAMP_DN_DELAY_US_MAX);
|
|
exit_flash_hdrm_sns:
|
|
if (led->pdata->hdrm_sns_ch0_en) {
|
|
if (flash_node->id == FLASH_LED_0 ||
|
|
flash_node->id == FLASH_LED_SWITCH) {
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
FLASH_HDRM_SNS_ENABLE_CTRL0(led->base),
|
|
FLASH_LED_HDRM_SNS_ENABLE_MASK,
|
|
FLASH_LED_HDRM_SNS_DISABLE);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Headroom sense disable failed\n");
|
|
goto exit_flash_hdrm_sns;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (led->pdata->hdrm_sns_ch1_en) {
|
|
if (flash_node->id == FLASH_LED_1 ||
|
|
flash_node->id == FLASH_LED_SWITCH) {
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
FLASH_HDRM_SNS_ENABLE_CTRL1(led->base),
|
|
FLASH_LED_HDRM_SNS_ENABLE_MASK,
|
|
FLASH_LED_HDRM_SNS_DISABLE);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Headroom sense disable failed\n");
|
|
goto exit_flash_hdrm_sns;
|
|
}
|
|
}
|
|
}
|
|
exit_flash_led_work:
|
|
rc = qpnp_flash_led_module_disable(led, flash_node);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev, "Module disable failed\n");
|
|
goto exit_flash_led_work;
|
|
}
|
|
error_enable_gpio:
|
|
if (flash_node->flash_on && flash_node->num_regulators > 0)
|
|
flash_regulator_enable(led, flash_node, false);
|
|
|
|
flash_node->flash_on = false;
|
|
mutex_unlock(&led->flash_led_lock);
|
|
|
|
return;
|
|
}
|
|
|
|
static void qpnp_flash_led_brightness_set(struct led_classdev *led_cdev,
|
|
enum led_brightness value)
|
|
{
|
|
struct flash_node_data *flash_node;
|
|
struct qpnp_flash_led *led;
|
|
flash_node = container_of(led_cdev, struct flash_node_data, cdev);
|
|
led = dev_get_drvdata(&flash_node->spmi_dev->dev);
|
|
|
|
if (value < LED_OFF) {
|
|
pr_err("Invalid brightness value\n");
|
|
return;
|
|
}
|
|
|
|
if (value > flash_node->cdev.max_brightness)
|
|
value = flash_node->cdev.max_brightness;
|
|
|
|
flash_node->cdev.brightness = value;
|
|
if (led->flash_node[led->num_leds - 1].id ==
|
|
FLASH_LED_SWITCH) {
|
|
if (flash_node->type == TORCH)
|
|
led->flash_node[led->num_leds - 1].type = TORCH;
|
|
else if (flash_node->type == FLASH)
|
|
led->flash_node[led->num_leds - 1].type = FLASH;
|
|
|
|
led->flash_node[led->num_leds - 1].max_current
|
|
= flash_node->max_current;
|
|
|
|
if (flash_node->id == FLASH_LED_0 ||
|
|
flash_node->id == FLASH_LED_1) {
|
|
if (value < FLASH_LED_MIN_CURRENT_MA && value != 0)
|
|
value = FLASH_LED_MIN_CURRENT_MA;
|
|
|
|
flash_node->prgm_current = value;
|
|
flash_node->flash_on = value ? true : false;
|
|
if (value)
|
|
led->flash_node[led->num_leds - 1].trigger |=
|
|
(0x80 >> flash_node->id);
|
|
else
|
|
led->flash_node[led->num_leds - 1].trigger &=
|
|
~(0x80 >> flash_node->id);
|
|
|
|
if (flash_node->id == FLASH_LED_0)
|
|
led->flash_node[led->num_leds - 1].
|
|
prgm_current = flash_node->prgm_current;
|
|
else if (flash_node->id == FLASH_LED_1)
|
|
led->flash_node[led->num_leds - 1].
|
|
prgm_current2 =
|
|
flash_node->prgm_current;
|
|
|
|
return;
|
|
} else if (flash_node->id == FLASH_LED_SWITCH) {
|
|
if (!value) {
|
|
flash_node->prgm_current = 0;
|
|
flash_node->prgm_current2 = 0;
|
|
}
|
|
}
|
|
} else {
|
|
if (value < FLASH_LED_MIN_CURRENT_MA && value != 0)
|
|
value = FLASH_LED_MIN_CURRENT_MA;
|
|
flash_node->prgm_current = value;
|
|
}
|
|
|
|
queue_work(led->ordered_workq, &flash_node->work);
|
|
|
|
return;
|
|
}
|
|
|
|
static int qpnp_flash_led_init_settings(struct qpnp_flash_led *led)
|
|
{
|
|
int rc;
|
|
u8 val, temp_val;
|
|
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
FLASH_MODULE_ENABLE_CTRL(led->base),
|
|
FLASH_MODULE_ENABLE_MASK,
|
|
FLASH_LED_MODULE_CTRL_DEFAULT);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev, "Module disable failed\n");
|
|
return rc;
|
|
}
|
|
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
FLASH_LED_STROBE_CTRL(led->base),
|
|
FLASH_STROBE_MASK, FLASH_LED_DISABLE);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev, "Strobe disable failed\n");
|
|
return rc;
|
|
}
|
|
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
FLASH_LED_TMR_CTRL(led->base),
|
|
FLASH_TMR_MASK, FLASH_TMR_SAFETY);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"LED timer ctrl reg write failed(%d)\n", rc);
|
|
return rc;
|
|
}
|
|
|
|
val = (u8)(led->pdata->headroom / FLASH_LED_HEADROOM_DIVIDER -
|
|
FLASH_LED_HEADROOM_OFFSET);
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
FLASH_HEADROOM(led->base),
|
|
FLASH_HEADROOM_MASK, val);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev, "Headroom reg write failed\n");
|
|
return rc;
|
|
}
|
|
|
|
val = qpnp_flash_led_get_startup_dly(led->pdata->startup_dly);
|
|
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
FLASH_STARTUP_DELAY(led->base),
|
|
FLASH_STARTUP_DLY_MASK, val);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Startup delay reg write failed\n");
|
|
return rc;
|
|
}
|
|
|
|
val = (u8)(led->pdata->clamp_current * FLASH_MAX_LEVEL /
|
|
FLASH_LED_MAX_CURRENT_MA);
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
FLASH_CLAMP_CURRENT(led->base),
|
|
FLASH_CURRENT_MASK, val);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Clamp current reg write failed\n");
|
|
return rc;
|
|
}
|
|
|
|
if (led->pdata->pmic_charger_support)
|
|
val = FLASH_LED_FLASH_HW_VREG_OK;
|
|
else
|
|
val = FLASH_LED_FLASH_SW_VREG_OK;
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
FLASH_VREG_OK_FORCE(led->base),
|
|
FLASH_VREG_OK_FORCE_MASK, val);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"VREG OK force reg write failed\n");
|
|
return rc;
|
|
}
|
|
|
|
if (led->pdata->self_check_en)
|
|
val = FLASH_MODULE_ENABLE;
|
|
else
|
|
val = FLASH_LED_DISABLE;
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
FLASH_FAULT_DETECT(led->base),
|
|
FLASH_FAULT_DETECT_MASK, val);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Fault detect reg write failed\n");
|
|
return rc;
|
|
}
|
|
|
|
val = 0x0;
|
|
val |= led->pdata->mask3_en << FLASH_LED_MASK3_ENABLE_SHIFT;
|
|
val |= FLASH_LED_MASK_MODULE_MASK2_ENABLE;
|
|
rc = qpnp_led_masked_write(led->spmi_dev, FLASH_MASK_ENABLE(led->base),
|
|
FLASH_MASK_MODULE_CONTRL_MASK, val);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev, "Mask module enable failed\n");
|
|
return rc;
|
|
}
|
|
|
|
rc = spmi_ext_register_readl(led->spmi_dev->ctrl,
|
|
led->spmi_dev->sid,
|
|
FLASH_PERPH_RESET_CTRL(led->base),
|
|
&val, 1);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Unable to read from address %x, rc(%d)\n",
|
|
FLASH_PERPH_RESET_CTRL(led->base), rc);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (led->pdata->follow_rb_disable) {
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
FLASH_LED_UNLOCK_SECURE(led->base),
|
|
FLASH_SECURE_MASK, FLASH_UNLOCK_SECURE);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Secure reg write failed\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
val |= FLASH_FOLLOW_OTST2_RB_MASK;
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
FLASH_PERPH_RESET_CTRL(led->base),
|
|
FLASH_FOLLOW_OTST2_RB_MASK, val);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"failed to reset OTST2_RB bit\n");
|
|
return rc;
|
|
}
|
|
} else {
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
FLASH_LED_UNLOCK_SECURE(led->base),
|
|
FLASH_SECURE_MASK, FLASH_UNLOCK_SECURE);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Secure reg write failed\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
val &= ~FLASH_FOLLOW_OTST2_RB_MASK;
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
FLASH_PERPH_RESET_CTRL(led->base),
|
|
FLASH_FOLLOW_OTST2_RB_MASK, val);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"failed to reset OTST2_RB bit\n");
|
|
return rc;
|
|
}
|
|
}
|
|
|
|
if (!led->pdata->thermal_derate_en)
|
|
val = 0x0;
|
|
else {
|
|
val = led->pdata->thermal_derate_en << 7;
|
|
val |= led->pdata->thermal_derate_rate << 3;
|
|
val |= (led->pdata->thermal_derate_threshold -
|
|
FLASH_LED_THERMAL_THRESHOLD_MIN) /
|
|
FLASH_LED_THERMAL_DEVIDER;
|
|
}
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
FLASH_THERMAL_DRATE(led->base),
|
|
FLASH_THERMAL_DERATE_MASK, val);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev, "Thermal derate reg write failed\n");
|
|
return rc;
|
|
}
|
|
|
|
if (!led->pdata->current_ramp_en)
|
|
val = 0x0;
|
|
else {
|
|
val = led->pdata->current_ramp_en << 7;
|
|
val |= led->pdata->ramp_up_step << 3;
|
|
val |= led->pdata->ramp_dn_step;
|
|
}
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
FLASH_CURRENT_RAMP(led->base),
|
|
FLASH_CURRENT_RAMP_MASK, val);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev, "Current ramp reg write failed\n");
|
|
return rc;
|
|
}
|
|
|
|
if (!led->pdata->vph_pwr_droop_en)
|
|
val = 0x0;
|
|
else {
|
|
val = led->pdata->vph_pwr_droop_en << 7;
|
|
val |= ((led->pdata->vph_pwr_droop_threshold -
|
|
FLASH_LED_VPH_DROOP_THRESHOLD_MIN_MV) /
|
|
FLASH_LED_VPH_DROOP_THRESHOLD_DIVIDER) << 4;
|
|
temp_val =
|
|
qpnp_flash_led_get_droop_debounce_time(
|
|
led->pdata->vph_pwr_droop_debounce_time);
|
|
if (temp_val == 0xFF) {
|
|
dev_err(&led->spmi_dev->dev, "Invalid debounce time\n");
|
|
return temp_val;
|
|
}
|
|
|
|
val |= temp_val;
|
|
}
|
|
rc = qpnp_led_masked_write(led->spmi_dev,
|
|
FLASH_VPH_PWR_DROOP(led->base),
|
|
FLASH_VPH_PWR_DROOP_MASK, val);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev, "VPH PWR droop reg write failed\n");
|
|
return rc;
|
|
}
|
|
|
|
led->battery_psy = power_supply_get_by_name("battery");
|
|
if (!led->battery_psy) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Failed to get battery power supply\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qpnp_flash_led_parse_each_led_dt(struct qpnp_flash_led *led,
|
|
struct flash_node_data *flash_node)
|
|
{
|
|
const char *temp_string;
|
|
struct device_node *node = flash_node->cdev.dev->of_node;
|
|
struct device_node *temp = NULL;
|
|
int rc = 0, num_regs = 0;
|
|
u32 val;
|
|
|
|
rc = of_property_read_string(node, "label", &temp_string);
|
|
if (!rc) {
|
|
if (strcmp(temp_string, "flash") == 0)
|
|
flash_node->type = FLASH;
|
|
else if (strcmp(temp_string, "torch") == 0)
|
|
flash_node->type = TORCH;
|
|
else if (strcmp(temp_string, "switch") == 0)
|
|
flash_node->type = SWITCH;
|
|
else {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Wrong flash LED type\n");
|
|
return -EINVAL;
|
|
}
|
|
} else if (rc < 0) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Unable to read flash type\n");
|
|
return rc;
|
|
}
|
|
|
|
rc = of_property_read_u32(node, "qcom,current", &val);
|
|
if (!rc) {
|
|
if (val < FLASH_LED_MIN_CURRENT_MA)
|
|
val = FLASH_LED_MIN_CURRENT_MA;
|
|
flash_node->prgm_current = val;
|
|
} else if (rc != -EINVAL) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Unable to read current\n");
|
|
return rc;
|
|
}
|
|
|
|
rc = of_property_read_u32(node, "qcom,id", &val);
|
|
if (!rc)
|
|
flash_node->id = (u8)val;
|
|
else if (rc != -EINVAL) {
|
|
dev_err(&led->spmi_dev->dev, "Unable to read led ID\n");
|
|
return rc;
|
|
}
|
|
|
|
if (flash_node->type == SWITCH || flash_node->type == FLASH) {
|
|
rc = of_property_read_u32(node, "qcom,duration", &val);
|
|
if (!rc)
|
|
flash_node->duration = (u16)val;
|
|
else if (rc != -EINVAL) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Unable to read duration\n");
|
|
return rc;
|
|
}
|
|
}
|
|
|
|
switch (led->peripheral_type) {
|
|
case FLASH_SUBTYPE_SINGLE:
|
|
flash_node->trigger = FLASH_LED0_TRIGGER;
|
|
break;
|
|
case FLASH_SUBTYPE_DUAL:
|
|
if (flash_node->id == FLASH_LED_0)
|
|
flash_node->trigger = FLASH_LED0_TRIGGER;
|
|
else if (flash_node->id == FLASH_LED_1)
|
|
flash_node->trigger = FLASH_LED1_TRIGGER;
|
|
break;
|
|
default:
|
|
dev_err(&led->spmi_dev->dev, "Invalid peripheral type\n");
|
|
}
|
|
|
|
while ((temp = of_get_next_child(node, temp))) {
|
|
if (of_find_property(temp, "regulator-name", NULL))
|
|
num_regs++;
|
|
}
|
|
|
|
if (num_regs)
|
|
flash_node->num_regulators = num_regs;
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int qpnp_flash_led_parse_common_dt(
|
|
struct qpnp_flash_led *led,
|
|
struct device_node *node)
|
|
{
|
|
int rc;
|
|
u32 val, temp_val;
|
|
const char *temp;
|
|
|
|
led->pdata->headroom = FLASH_LED_HEADROOM_DEFAULT_MV;
|
|
rc = of_property_read_u32(node, "qcom,headroom", &val);
|
|
if (!rc)
|
|
led->pdata->headroom = (u16)val;
|
|
else if (rc != -EINVAL) {
|
|
dev_err(&led->spmi_dev->dev, "Unable to read headroom\n");
|
|
return rc;
|
|
}
|
|
|
|
led->pdata->startup_dly = FLASH_LED_STARTUP_DELAY_DEFAULT_US;
|
|
rc = of_property_read_u32(node, "qcom,startup-dly", &val);
|
|
if (!rc)
|
|
led->pdata->startup_dly = (u8)val;
|
|
else if (rc != -EINVAL) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Unable to read startup delay\n");
|
|
return rc;
|
|
}
|
|
|
|
led->pdata->clamp_current = FLASH_LED_CLAMP_CURRENT_DEFAULT_MA;
|
|
rc = of_property_read_u32(node, "qcom,clamp-current", &val);
|
|
if (!rc) {
|
|
if (val < FLASH_LED_MIN_CURRENT_MA)
|
|
val = FLASH_LED_MIN_CURRENT_MA;
|
|
led->pdata->clamp_current = (u16)val;
|
|
} else if (rc != -EINVAL) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Unable to read clamp current\n");
|
|
return rc;
|
|
}
|
|
|
|
led->pdata->pmic_charger_support =
|
|
of_property_read_bool(node,
|
|
"qcom,pmic-charger-support");
|
|
|
|
led->pdata->self_check_en =
|
|
of_property_read_bool(node, "qcom,self-check-enabled");
|
|
|
|
led->pdata->thermal_derate_en =
|
|
of_property_read_bool(node,
|
|
"qcom,thermal-derate-enabled");
|
|
|
|
if (led->pdata->thermal_derate_en) {
|
|
led->pdata->thermal_derate_rate =
|
|
FLASH_LED_THERMAL_DERATE_RATE_DEFAULT_PERCENT;
|
|
rc = of_property_read_string(node, "qcom,thermal-derate-rate",
|
|
&temp);
|
|
if (!rc) {
|
|
temp_val =
|
|
qpnp_flash_led_get_thermal_derate_rate(temp);
|
|
if (temp_val < 0) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Invalid thermal derate rate\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
led->pdata->thermal_derate_rate = (u8)temp_val;
|
|
} else {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Unable to read thermal derate rate\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
led->pdata->thermal_derate_threshold =
|
|
FLASH_LED_THERMAL_DERATE_THRESHOLD_DEFAULT_C;
|
|
rc = of_property_read_u32(node, "qcom,thermal-derate-threshold",
|
|
&val);
|
|
if (!rc)
|
|
led->pdata->thermal_derate_threshold = (u8)val;
|
|
else if (rc != -EINVAL) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Unable to read thermal derate threshold\n");
|
|
return rc;
|
|
}
|
|
}
|
|
|
|
led->pdata->current_ramp_en =
|
|
of_property_read_bool(node,
|
|
"qcom,current-ramp-enabled");
|
|
if (led->pdata->current_ramp_en) {
|
|
led->pdata->ramp_up_step = FLASH_LED_RAMP_UP_STEP_DEFAULT_US;
|
|
rc = of_property_read_string(node, "qcom,ramp_up_step", &temp);
|
|
if (!rc) {
|
|
temp_val = qpnp_flash_led_get_ramp_step(temp);
|
|
if (temp_val < 0) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Invalid ramp up step values\n");
|
|
return -EINVAL;
|
|
}
|
|
led->pdata->ramp_up_step = (u8)temp_val;
|
|
} else if (rc != -EINVAL) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Unable to read ramp up steps\n");
|
|
return rc;
|
|
}
|
|
|
|
led->pdata->ramp_dn_step = FLASH_LED_RAMP_DN_STEP_DEFAULT_US;
|
|
rc = of_property_read_string(node, "qcom,ramp_dn_step", &temp);
|
|
if (!rc) {
|
|
temp_val = qpnp_flash_led_get_ramp_step(temp);
|
|
if (temp_val < 0) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Invalid ramp down step values\n");
|
|
return rc;
|
|
}
|
|
led->pdata->ramp_dn_step = (u8)temp_val;
|
|
} else if (rc != -EINVAL) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Unable to read ramp down steps\n");
|
|
return rc;
|
|
}
|
|
}
|
|
|
|
led->pdata->vph_pwr_droop_en = of_property_read_bool(node,
|
|
"qcom,vph-pwr-droop-enabled");
|
|
if (led->pdata->vph_pwr_droop_en) {
|
|
led->pdata->vph_pwr_droop_threshold =
|
|
FLASH_LED_VPH_PWR_DROOP_THRESHOLD_DEFAULT_MV;
|
|
rc = of_property_read_u32(node,
|
|
"qcom,vph-pwr-droop-threshold", &val);
|
|
if (!rc) {
|
|
led->pdata->vph_pwr_droop_threshold = (u16)val;
|
|
} else if (rc != -EINVAL) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Unable to read VPH PWR droop threshold\n");
|
|
return rc;
|
|
}
|
|
|
|
led->pdata->vph_pwr_droop_debounce_time =
|
|
FLASH_LED_VPH_PWR_DROOP_DEBOUNCE_TIME_DEFAULT_US;
|
|
rc = of_property_read_u32(node,
|
|
"qcom,vph-pwr-droop-debounce-time", &val);
|
|
if (!rc)
|
|
led->pdata->vph_pwr_droop_debounce_time = (u8)val;
|
|
else if (rc != -EINVAL) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Unable to read VPH PWR droop debounce time\n");
|
|
return rc;
|
|
}
|
|
}
|
|
|
|
led->pdata->hdrm_sns_ch0_en = of_property_read_bool(node,
|
|
"qcom,headroom-sense-ch0-enabled");
|
|
|
|
led->pdata->hdrm_sns_ch1_en = of_property_read_bool(node,
|
|
"qcom,headroom-sense-ch1-enabled");
|
|
|
|
led->pdata->power_detect_en = of_property_read_bool(node,
|
|
"qcom,power-detect-enabled");
|
|
|
|
led->pdata->mask3_en = of_property_read_bool(node,
|
|
"qcom,otst2-module-enabled");
|
|
|
|
led->pdata->follow_rb_disable = of_property_read_bool(node,
|
|
"qcom,follow-otst2-rb-disabled");
|
|
|
|
led->pdata->die_current_derate_en = of_property_read_bool(node,
|
|
"qcom,die-current-derate-enabled");
|
|
|
|
if (led->pdata->die_current_derate_en) {
|
|
led->vadc_dev = qpnp_get_vadc(&led->spmi_dev->dev,
|
|
"die-temp");
|
|
if (IS_ERR(led->vadc_dev)) {
|
|
pr_err("VADC channel property Missing\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (of_find_property(node, "qcom,die-temp-threshold",
|
|
&led->pdata->temp_threshold_num)) {
|
|
|
|
if (led->pdata->temp_threshold_num > 0) {
|
|
led->pdata->die_temp_threshold_degc =
|
|
devm_kzalloc(&led->spmi_dev->dev,
|
|
led->pdata->temp_threshold_num,
|
|
GFP_KERNEL);
|
|
|
|
if (led->pdata->die_temp_threshold_degc
|
|
== NULL) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"failed to allocate die temp array\n");
|
|
return -ENOMEM;
|
|
}
|
|
led->pdata->temp_threshold_num /=
|
|
sizeof(unsigned int);
|
|
|
|
rc = of_property_read_u32_array(node,
|
|
"qcom,die-temp-threshold",
|
|
led->pdata->die_temp_threshold_degc,
|
|
led->pdata->temp_threshold_num);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"couldn't read temp threshold rc=%d\n",
|
|
rc);
|
|
return rc;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (of_find_property(node, "qcom,die-temp-derate-current",
|
|
&led->pdata->temp_derate_curr_num)) {
|
|
if (led->pdata->temp_derate_curr_num > 0) {
|
|
led->pdata->die_temp_derate_curr_ma =
|
|
devm_kzalloc(&led->spmi_dev->dev,
|
|
led->pdata->temp_derate_curr_num,
|
|
GFP_KERNEL);
|
|
if (led->pdata->die_temp_derate_curr_ma
|
|
== NULL) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"failed to allocate die derate current array\n");
|
|
return -ENOMEM;
|
|
}
|
|
led->pdata->temp_derate_curr_num /=
|
|
sizeof(unsigned int);
|
|
|
|
rc = of_property_read_u32_array(node,
|
|
"qcom,die-temp-derate-current",
|
|
led->pdata->die_temp_derate_curr_ma,
|
|
led->pdata->temp_derate_curr_num);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"couldn't read temp limits rc =%d\n",
|
|
rc);
|
|
return rc;
|
|
}
|
|
}
|
|
}
|
|
if (led->pdata->temp_threshold_num !=
|
|
led->pdata->temp_derate_curr_num) {
|
|
pr_err("Both array size are not same\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
led->pinctrl = devm_pinctrl_get(&led->spmi_dev->dev);
|
|
if (IS_ERR_OR_NULL(led->pinctrl)) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Unable to acquire pinctrl\n");
|
|
led->pinctrl = NULL;
|
|
return 0;
|
|
} else {
|
|
led->gpio_state_active =
|
|
pinctrl_lookup_state(led->pinctrl, "flash_led_enable");
|
|
if (IS_ERR_OR_NULL(led->gpio_state_active)) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Can not lookup LED active state\n");
|
|
devm_pinctrl_put(led->pinctrl);
|
|
led->pinctrl = NULL;
|
|
return PTR_ERR(led->gpio_state_active);
|
|
}
|
|
led->gpio_state_suspend =
|
|
pinctrl_lookup_state(led->pinctrl,
|
|
"flash_led_disable");
|
|
if (IS_ERR_OR_NULL(led->gpio_state_suspend)) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Can not lookup LED disable state\n");
|
|
devm_pinctrl_put(led->pinctrl);
|
|
led->pinctrl = NULL;
|
|
return PTR_ERR(led->gpio_state_suspend);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qpnp_flash_led_probe(struct spmi_device *spmi)
|
|
{
|
|
struct qpnp_flash_led *led;
|
|
struct resource *flash_resource;
|
|
struct device_node *node, *temp;
|
|
struct dentry *root, *file;
|
|
int rc, i = 0, j, num_leds = 0;
|
|
u32 val;
|
|
|
|
node = spmi->dev.of_node;
|
|
if (node == NULL) {
|
|
dev_info(&spmi->dev, "No flash device defined\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
flash_resource = spmi_get_resource(spmi, 0, IORESOURCE_MEM, 0);
|
|
if (!flash_resource) {
|
|
dev_err(&spmi->dev, "Unable to get flash LED base address\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
led = devm_kzalloc(&spmi->dev, sizeof(struct qpnp_flash_led),
|
|
GFP_KERNEL);
|
|
if (!led) {
|
|
dev_err(&spmi->dev,
|
|
"Unable to allocate memory for flash LED\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
led->base = flash_resource->start;
|
|
led->spmi_dev = spmi;
|
|
led->current_addr = FLASH_LED0_CURRENT(led->base);
|
|
led->current2_addr = FLASH_LED1_CURRENT(led->base);
|
|
|
|
led->pdata = devm_kzalloc(&spmi->dev,
|
|
sizeof(struct flash_led_platform_data), GFP_KERNEL);
|
|
if (!led->pdata) {
|
|
dev_err(&spmi->dev,
|
|
"Unable to allocate memory for platform data\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
led->peripheral_type =
|
|
(u8)qpnp_flash_led_get_peripheral_type(led);
|
|
if (led->peripheral_type < 0) {
|
|
dev_err(&spmi->dev, "Failed to get peripheral type\n");
|
|
return rc;
|
|
}
|
|
|
|
rc = qpnp_flash_led_parse_common_dt(led, node);
|
|
if (rc) {
|
|
dev_err(&spmi->dev,
|
|
"Failed to get common config for flash LEDs\n");
|
|
return rc;
|
|
}
|
|
|
|
rc = qpnp_flash_led_init_settings(led);
|
|
if (rc) {
|
|
dev_err(&spmi->dev, "Failed to initialize flash LED\n");
|
|
return rc;
|
|
}
|
|
|
|
rc = qpnp_get_pmic_revid(led);
|
|
if (rc)
|
|
return rc;
|
|
|
|
temp = NULL;
|
|
while ((temp = of_get_next_child(node, temp)))
|
|
num_leds++;
|
|
|
|
if (!num_leds)
|
|
return -ECHILD;
|
|
|
|
led->flash_node = devm_kzalloc(&spmi->dev,
|
|
(sizeof(struct flash_node_data) * num_leds),
|
|
GFP_KERNEL);
|
|
if (!led->flash_node) {
|
|
dev_err(&spmi->dev, "Unable to allocate memory\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
mutex_init(&led->flash_led_lock);
|
|
|
|
led->ordered_workq = alloc_ordered_workqueue("flash_led_workqueue", 0);
|
|
if (!led->ordered_workq) {
|
|
dev_err(&spmi->dev,
|
|
"Failed to allocate ordered workqueue\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
for_each_child_of_node(node, temp) {
|
|
led->flash_node[i].cdev.brightness_set =
|
|
qpnp_flash_led_brightness_set;
|
|
led->flash_node[i].cdev.brightness_get =
|
|
qpnp_flash_led_brightness_get;
|
|
led->flash_node[i].spmi_dev = spmi;
|
|
|
|
INIT_WORK(&led->flash_node[i].work, qpnp_flash_led_work);
|
|
rc = of_property_read_string(temp, "qcom,led-name",
|
|
&led->flash_node[i].cdev.name);
|
|
if (rc < 0) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Unable to read flash name\n");
|
|
return rc;
|
|
}
|
|
|
|
rc = of_property_read_string(temp, "qcom,default-led-trigger",
|
|
&led->flash_node[i].cdev.default_trigger);
|
|
if (rc < 0) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Unable to read trigger name\n");
|
|
return rc;
|
|
}
|
|
|
|
rc = of_property_read_u32(temp, "qcom,max-current", &val);
|
|
if (!rc) {
|
|
if (val < FLASH_LED_MIN_CURRENT_MA)
|
|
val = FLASH_LED_MIN_CURRENT_MA;
|
|
led->flash_node[i].max_current = (u16)val;
|
|
led->flash_node[i].cdev.max_brightness = val;
|
|
} else {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Unable to read max current\n");
|
|
return rc;
|
|
}
|
|
rc = led_classdev_register(&spmi->dev,
|
|
&led->flash_node[i].cdev);
|
|
if (rc) {
|
|
dev_err(&spmi->dev, "Unable to register led\n");
|
|
goto error_led_register;
|
|
}
|
|
|
|
led->flash_node[i].cdev.dev->of_node = temp;
|
|
|
|
rc = qpnp_flash_led_parse_each_led_dt(led, &led->flash_node[i]);
|
|
if (rc) {
|
|
dev_err(&spmi->dev,
|
|
"Failed to parse config for each LED\n");
|
|
goto error_led_register;
|
|
}
|
|
|
|
if (led->flash_node[i].num_regulators) {
|
|
rc = flash_regulator_parse_dt(led, &led->flash_node[i]);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Unable to parse regulator data\n");
|
|
goto error_led_register;
|
|
}
|
|
|
|
rc = flash_regulator_setup(led, &led->flash_node[i],
|
|
true);
|
|
if (rc) {
|
|
dev_err(&led->spmi_dev->dev,
|
|
"Unable to set up regulator\n");
|
|
goto error_led_register;
|
|
}
|
|
|
|
}
|
|
|
|
for (j = 0; j < ARRAY_SIZE(qpnp_flash_led_attrs); j++) {
|
|
rc =
|
|
sysfs_create_file(&led->flash_node[i].cdev.dev->kobj,
|
|
&qpnp_flash_led_attrs[j].attr);
|
|
if (rc)
|
|
goto error_led_register;
|
|
}
|
|
|
|
i++;
|
|
}
|
|
|
|
led->num_leds = i;
|
|
|
|
root = debugfs_create_dir("flashLED", NULL);
|
|
if (IS_ERR_OR_NULL(root)) {
|
|
pr_err("Error creating top level directory err%ld",
|
|
(long)root);
|
|
if (PTR_ERR(root) == -ENODEV)
|
|
pr_err("debugfs is not enabled in kernel");
|
|
goto error_led_debugfs;
|
|
}
|
|
|
|
led->dbgfs_root = root;
|
|
file = debugfs_create_file("enable_debug", S_IRUSR | S_IWUSR, root,
|
|
led, &flash_led_dfs_dbg_feature_fops);
|
|
if (!file) {
|
|
pr_err("error creating 'enable_debug' entry\n");
|
|
goto error_led_debugfs;
|
|
}
|
|
|
|
file = debugfs_create_file("latched", S_IRUSR | S_IWUSR, root, led,
|
|
&flash_led_dfs_latched_reg_fops);
|
|
if (!file) {
|
|
pr_err("error creating 'latched' entry\n");
|
|
goto error_led_debugfs;
|
|
}
|
|
|
|
file = debugfs_create_file("strobe", S_IRUSR | S_IWUSR, root, led,
|
|
&flash_led_dfs_strobe_reg_fops);
|
|
if (!file) {
|
|
pr_err("error creating 'strobe' entry\n");
|
|
goto error_led_debugfs;
|
|
}
|
|
|
|
dev_set_drvdata(&spmi->dev, led);
|
|
|
|
return 0;
|
|
|
|
error_led_debugfs:
|
|
i = led->num_leds - 1;
|
|
j = ARRAY_SIZE(qpnp_flash_led_attrs) - 1;
|
|
error_led_register:
|
|
for (; i >= 0; i--) {
|
|
for (; j >= 0; j--)
|
|
sysfs_remove_file(&led->flash_node[i].cdev.dev->kobj,
|
|
&qpnp_flash_led_attrs[j].attr);
|
|
j = ARRAY_SIZE(qpnp_flash_led_attrs) - 1;
|
|
led_classdev_unregister(&led->flash_node[i].cdev);
|
|
}
|
|
debugfs_remove_recursive(root);
|
|
mutex_destroy(&led->flash_led_lock);
|
|
destroy_workqueue(led->ordered_workq);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int qpnp_flash_led_remove(struct spmi_device *spmi)
|
|
{
|
|
struct qpnp_flash_led *led = dev_get_drvdata(&spmi->dev);
|
|
int i, j;
|
|
|
|
for (i = led->num_leds - 1; i >= 0; i--) {
|
|
if (led->flash_node[i].reg_data) {
|
|
if (led->flash_node[i].flash_on)
|
|
flash_regulator_enable(led,
|
|
&led->flash_node[i], false);
|
|
flash_regulator_setup(led, &led->flash_node[i],
|
|
false);
|
|
}
|
|
for (j = 0; j < ARRAY_SIZE(qpnp_flash_led_attrs); j++)
|
|
sysfs_remove_file(&led->flash_node[i].cdev.dev->kobj,
|
|
&qpnp_flash_led_attrs[j].attr);
|
|
led_classdev_unregister(&led->flash_node[i].cdev);
|
|
}
|
|
debugfs_remove_recursive(led->dbgfs_root);
|
|
mutex_destroy(&led->flash_led_lock);
|
|
destroy_workqueue(led->ordered_workq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct of_device_id spmi_match_table[] = {
|
|
{ .compatible = "qcom,qpnp-flash-led",},
|
|
{ },
|
|
};
|
|
|
|
static struct spmi_driver qpnp_flash_led_driver = {
|
|
.driver = {
|
|
.name = "qcom,qpnp-flash-led",
|
|
.of_match_table = spmi_match_table,
|
|
},
|
|
.probe = qpnp_flash_led_probe,
|
|
.remove = qpnp_flash_led_remove,
|
|
};
|
|
|
|
static int __init qpnp_flash_led_init(void)
|
|
{
|
|
return spmi_driver_register(&qpnp_flash_led_driver);
|
|
}
|
|
late_initcall(qpnp_flash_led_init);
|
|
|
|
static void __exit qpnp_flash_led_exit(void)
|
|
{
|
|
spmi_driver_unregister(&qpnp_flash_led_driver);
|
|
}
|
|
module_exit(qpnp_flash_led_exit);
|
|
|
|
MODULE_DESCRIPTION("QPNP Flash LED driver");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("leds:leds-qpnp-flash");
|