309 lines
7.4 KiB
Plaintext
309 lines
7.4 KiB
Plaintext
/*
|
|
* Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 and
|
|
* only version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include "msmtitanium-pinctrl.dtsi"
|
|
#include "msmtitanium-camera-sensor-cdp.dtsi"
|
|
|
|
&spi_3 { /* BLSP1 QUP3 */
|
|
spi-max-frequency = <8000000>;
|
|
maxim_sti@0 {
|
|
status = "disabled";
|
|
compatible = "maxim,maxim_sti";
|
|
reg = <0>;
|
|
interrupt-parent = <&tlmm>;
|
|
interrupts = <65 0>;
|
|
spi-max-frequency = <8000000>;
|
|
avdd-supply = <&pmtitanium_l10>;
|
|
dvdd-supply = <&pmtitanium_l5>;
|
|
maxim_sti,irq-gpio = <&tlmm 65 0x00>;
|
|
maxim_sti,reset-gpio = <&tlmm 64 0x00>;
|
|
maxim_sti,touch_fusion = "/vendor/bin/touch_fusion";
|
|
maxim_sti,config_file = "/etc/firmware/qtc800s.cfg";
|
|
maxim_sti,fw_name = "qtc800s.bin";
|
|
pinctrl-names = "pmx_ts_active","pmx_ts_suspend",
|
|
"pmx_ts_release";
|
|
pinctrl-0 = <&ts_int_active &ts_reset_active>;
|
|
pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
|
|
pinctrl-2 = <&ts_release>;
|
|
};
|
|
};
|
|
|
|
&i2c_5 { /* BLSP2 QUP1 (NFC) */
|
|
nq@28 {
|
|
compatible = "qcom,nq-nci";
|
|
reg = <0x28>;
|
|
qcom,nq-irq = <&tlmm 17 0x00>;
|
|
qcom,nq-ven = <&tlmm 16 0x00>;
|
|
qcom,nq-firm = <&tlmm 62 0x00>;
|
|
qcom,nq-clkreq = <&pmtitanium_gpios 2 0x00>;
|
|
interrupt-parent = <&tlmm>;
|
|
qcom,clk-src = "BBCLK2";
|
|
interrupts = <17 0>;
|
|
interrupt-names = "nfc_irq";
|
|
pinctrl-names = "nfc_active", "nfc_suspend";
|
|
pinctrl-0 = <&nfc_int_active &nfc_disable_active>;
|
|
pinctrl-1 = <&nfc_int_suspend &nfc_disable_suspend>;
|
|
clocks = <&clock_gcc clk_bb_clk2_pin>;
|
|
clock-names = "ref_clk";
|
|
};
|
|
};
|
|
|
|
&pmtitanium_l10 {
|
|
regulator-max-microvolt = <2850000>;
|
|
};
|
|
|
|
&soc {
|
|
gpio_keys {
|
|
compatible = "gpio-keys";
|
|
input-name = "gpio-keys";
|
|
pinctrl-names = "tlmm_gpio_key_active","tlmm_gpio_key_suspend";
|
|
pinctrl-0 = <&gpio_key_active>;
|
|
pinctrl-1 = <&gpio_key_suspend>;
|
|
|
|
camera_focus {
|
|
label = "camera_focus";
|
|
gpios = <&tlmm 87 0x1>;
|
|
linux,input-type = <1>;
|
|
linux,code = <0x210>;
|
|
debounce-interval = <15>;
|
|
};
|
|
|
|
camera_snapshot {
|
|
label = "camera_snapshot";
|
|
gpios = <&tlmm 86 0x1>;
|
|
linux,input-type = <1>;
|
|
linux,code = <0x2fe>;
|
|
debounce-interval = <15>;
|
|
};
|
|
|
|
vol_up {
|
|
label = "volume_up";
|
|
gpios = <&tlmm 85 0x1>;
|
|
linux,input-type = <1>;
|
|
linux,code = <115>;
|
|
debounce-interval = <15>;
|
|
};
|
|
|
|
home {
|
|
label = "home";
|
|
gpios = <&tlmm 88 0x1>;
|
|
linux,input-type = <1>;
|
|
linux,code = <102>;
|
|
debounce-interval = <15>;
|
|
};
|
|
};
|
|
|
|
hbtp {
|
|
compatible = "qcom,hbtp-input";
|
|
vcc_ana-supply = <&pmtitanium_l10>;
|
|
vcc_dig-supply = <&pmtitanium_l5>;
|
|
qcom,afe-load = <50000>;
|
|
qcom,afe-vtg-min = <2850000>;
|
|
qcom,afe-vtg-max = <2850000>;
|
|
qcom,dig-load = <15000>;
|
|
qcom,dig-vtg-min = <1800000>;
|
|
qcom,dig-vtg-max = <1800000>;
|
|
};
|
|
};
|
|
|
|
&tlmm {
|
|
tlmm_gpio_key {
|
|
gpio_key_active: gpio_key_active {
|
|
mux {
|
|
pins = "gpio85", "gpio86", "gpio87", "gpio88";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio85", "gpio86", "gpio87", "gpio88";
|
|
};
|
|
};
|
|
|
|
gpio_key_suspend: gpio_key_suspend {
|
|
mux {
|
|
pins = "gpio85", "gpio86", "gpio87", "gpio88";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio85", "gpio86", "gpio87", "gpio88";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&pmi_haptic{
|
|
qcom,actuator-type = "lra";
|
|
qcom,lra-auto-res-mode="qwd";
|
|
qcom,lra-high-z="opt1";
|
|
qcom,lra-res-cal-period = <0>;
|
|
qcom,wave-play-rate-us = <4165>;
|
|
};
|
|
|
|
&flash_led {
|
|
compatible = "qcom,qpnp-flash-led";
|
|
reg = <0xd300 0x100>;
|
|
pinctrl-names = "flash_led_enable","flash_led_disable";
|
|
pinctrl-0 = <&rear_flash_led_enable>;
|
|
pinctrl-1 = <&rear_flash_led_disable>;
|
|
qcom,follow-otst2-rb-disabled;
|
|
};
|
|
|
|
#include "msmtitanium-mdss-panels.dtsi"
|
|
|
|
&mdss_mdp {
|
|
qcom,mdss-pref-prim-intf = "dsi";
|
|
};
|
|
|
|
&mdss_dsi {
|
|
hw-config = "single_dsi";
|
|
};
|
|
|
|
&mdss_dsi0 {
|
|
qcom,dsi-pref-prim-pan = <&dsi_truly_1080_vid>;
|
|
pinctrl-names = "mdss_default", "mdss_sleep";
|
|
pinctrl-0 = <&mdss_dsi_active &mdss_te_active>;
|
|
pinctrl-1 = <&mdss_dsi_suspend &mdss_te_suspend>;
|
|
|
|
qcom,platform-te-gpio = <&tlmm 24 0>;
|
|
qcom,platform-reset-gpio = <&tlmm 61 0>;
|
|
qcom,platform-bklight-en-gpio = <&tlmm 59 0>;
|
|
};
|
|
|
|
&mdss_dsi1 {
|
|
status = "disabled";
|
|
qcom,dsi-pref-prim-pan = <&dsi_adv7533_1080p>;
|
|
pinctrl-names = "mdss_default", "mdss_sleep";
|
|
pinctrl-0 = <&mdss_dsi_active &mdss_te_active>;
|
|
pinctrl-1 = <&mdss_dsi_suspend &mdss_te_suspend>;
|
|
|
|
qcom,pluggable;
|
|
qcom,platform-te-gpio = <&tlmm 24 0>;
|
|
qcom,platform-reset-gpio = <&tlmm 61 0>;
|
|
qcom,platform-bklight-en-gpio = <&tlmm 59 0>;
|
|
};
|
|
|
|
&labibb {
|
|
status = "ok";
|
|
qpnp,qpnp-labibb-mode = "lcd";
|
|
};
|
|
|
|
&dsi_truly_1080_vid {
|
|
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
|
|
};
|
|
|
|
&dsi_truly_1080_cmd {
|
|
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
|
|
};
|
|
|
|
&blsp1_uart0 {
|
|
status = "ok";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart_console_active>;
|
|
};
|
|
|
|
&sdhc_1 {
|
|
/* device core power supply */
|
|
vdd-supply = <&pmtitanium_l8>;
|
|
qcom,vdd-voltage-level = <2900000 2900000>;
|
|
qcom,vdd-current-level = <200 570000>;
|
|
|
|
/* device communication power supply */
|
|
vdd-io-supply = <&pmtitanium_l5>;
|
|
qcom,vdd-io-always-on;
|
|
qcom,vdd-io-lpm-sup;
|
|
qcom,vdd-io-voltage-level = <1800000 1800000>;
|
|
qcom,vdd-io-current-level = <200 325000>;
|
|
|
|
pinctrl-names = "active", "sleep";
|
|
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
|
|
pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;
|
|
|
|
qcom,clk-rates = <400000 20000000 25000000 50000000 100000000 192000000
|
|
384000000>;
|
|
qcom,nonremovable;
|
|
qcom,bus-speed-mode = "HS400_1p8v", "HS200_1p8v", "DDR_1p8v";
|
|
|
|
status = "ok";
|
|
};
|
|
|
|
&sdhc_2 {
|
|
/* device core power supply */
|
|
vdd-supply = <&pmtitanium_l11>;
|
|
qcom,vdd-voltage-level = <2950000 2950000>;
|
|
qcom,vdd-current-level = <15000 800000>;
|
|
|
|
/* device communication power supply */
|
|
vdd-io-supply = <&pmtitanium_l12>;
|
|
qcom,vdd-io-voltage-level = <1800000 2950000>;
|
|
qcom,vdd-io-current-level = <200 22000>;
|
|
|
|
pinctrl-names = "active", "sleep";
|
|
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
|
|
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
|
|
|
|
#address-cells = <0>;
|
|
interrupt-parent = <&sdhc_2>;
|
|
interrupts = <0 1 2>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0xffffffff>;
|
|
interrupt-map = <0 &intc 0 125 0
|
|
1 &intc 0 221 0
|
|
2 &tlmm 133 0>;
|
|
interrupt-names = "hc_irq", "pwr_irq", "status_irq";
|
|
cd-gpios = <&tlmm 133 0x1>;
|
|
|
|
qcom,clk-rates = <400000 20000000 25000000 50000000 100000000
|
|
192000000>;
|
|
qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104";
|
|
|
|
status = "ok";
|
|
};
|
|
|
|
&pmtitanium_typec {
|
|
ss-mux-supply = <&pmtitanium_l13>;
|
|
qcom,ssmux-gpio = <&tlmm 139 0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&typec_ssmux_config>;
|
|
};
|
|
|
|
&pmi8950_charger {
|
|
qcom,external-typec;
|
|
qcom,typec-psy-name = "typec";
|
|
};
|
|
|
|
&pmtitanium_gpios {
|
|
/* GPIO 2 (NFC_CLK_REQ) */
|
|
gpio@c100 {
|
|
qcom,mode = <0>;
|
|
qcom,output-type = <0>;
|
|
qcom,pull = <0>;
|
|
qcom,vin-sel = <2>;
|
|
qcom,out-strength = <3>;
|
|
qcom,src-sel = <0>;
|
|
qcom,master-en = <1>;
|
|
status = "okay";
|
|
};
|
|
|
|
/* GPIO 5 (ADV7533 DSI2HDMI) */
|
|
gpio@c400 {
|
|
status = "ok";
|
|
qcom,mode = <1>;
|
|
qcom,vin-sel = <0>;
|
|
qcom,src-sel = <0>;
|
|
qcom,master-en = <1>;
|
|
qcom,out-strength = <2>;
|
|
};
|
|
|
|
};
|