647 lines
15 KiB
Plaintext
647 lines
15 KiB
Plaintext
/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 and
|
|
* only version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
|
|
#include "msm8996-pinctrl.dtsi"
|
|
#include "msm8996-camera-sensor-mtp.dtsi"
|
|
#include "msm8996-wsa881x.dtsi"
|
|
|
|
/ {
|
|
model = "Qualcomm Technologies, Inc. MSM 8996 FLUID";
|
|
compatible = "qcom,msm8996-fluid", "qcom,msm8996", "qcom,fluid";
|
|
qcom,board-id = <3 0>;
|
|
|
|
bluetooth: bt_qca6174 {
|
|
compatible = "qca,qca6174";
|
|
qca,bt-reset-gpio = <&pm8994_gpios 19 0>; /* BT_EN */
|
|
qca,bt-vdd-core-supply = <&pm8994_s3>;
|
|
qca,bt-vdd-pa-supply = <&rome_vreg>;
|
|
qca,bt-vdd-io-supply = <&pm8994_s4>;
|
|
qca,bt-vdd-xtal-supply = <&pm8994_l30>;
|
|
qca,bt-vdd-core-voltage-level = <1300000 1800000>;
|
|
qca,bt-vdd-io-voltage-level = <1800000 1800000>;
|
|
qca,bt-vdd-xtal-voltage-level = <1800000 1800000>;
|
|
};
|
|
};
|
|
|
|
&i2c_7 {
|
|
smb1351-charger@1d {
|
|
compatible = "qcom,smb1351-charger";
|
|
reg = <0x1d>;
|
|
qcom,parallel-charger;
|
|
qcom,float-voltage-mv = <4400>;
|
|
qcom,recharge-mv = <100>;
|
|
};
|
|
|
|
ina231@40 {
|
|
compatible = "ina231";
|
|
reg = <0x40>;
|
|
shunt-resistor = <5000>;
|
|
};
|
|
};
|
|
|
|
&ufs_ice {
|
|
status = "ok";
|
|
};
|
|
|
|
&ufsphy1 {
|
|
status = "ok";
|
|
};
|
|
|
|
&ufs1 {
|
|
status = "ok";
|
|
};
|
|
|
|
&uartblsp2dm1 {
|
|
status = "ok";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart_console_active>;
|
|
};
|
|
|
|
|
|
&sdhc_1 {
|
|
vdd-supply = <&pm8994_l20>;
|
|
qcom,vdd-voltage-level = <2950000 2950000>;
|
|
qcom,vdd-current-level = <200 570000>;
|
|
|
|
vdd-io-supply = <&pm8994_s4>;
|
|
qcom,vdd-io-always-on;
|
|
qcom,vdd-io-voltage-level = <1800000 1800000>;
|
|
qcom,vdd-io-current-level = <110 325000>;
|
|
|
|
pinctrl-names = "active", "sleep";
|
|
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
|
|
pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;
|
|
|
|
qcom,clk-rates = <400000 20000000 25000000 50000000 96000000 192000000 384000000>;
|
|
qcom,ice-clk-rates = <300000000 150000000>;
|
|
qcom,nonremovable;
|
|
qcom,bus-speed-mode = "HS400_1p8v", "HS200_1p8v", "DDR_1p8v";
|
|
|
|
status = "ok";
|
|
};
|
|
|
|
&sdhc_2 {
|
|
vdd-supply = <&pm8994_l21>;
|
|
qcom,vdd-voltage-level = <2950000 2950000>;
|
|
qcom,vdd-current-level = <200 800000>;
|
|
|
|
vdd-io-supply = <&pm8994_l13>;
|
|
qcom,vdd-io-voltage-level = <1800000 2950000>;
|
|
qcom,vdd-io-current-level = <200 22000>;
|
|
|
|
pinctrl-names = "active", "sleep";
|
|
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
|
|
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
|
|
|
|
qcom,clk-rates = <400000 20000000 25000000 50000000 100000000 200000000>;
|
|
qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104";
|
|
|
|
cd-gpios = <&tlmm 95 0x1>;
|
|
|
|
status = "ok";
|
|
};
|
|
|
|
&pm8994_vadc {
|
|
chan@5 {
|
|
label = "vcoin";
|
|
reg = <5>;
|
|
qcom,decimation = <0>;
|
|
qcom,pre-div-channel-scaling = <1>;
|
|
qcom,calibration-type = "absolute";
|
|
qcom,scale-function = <0>;
|
|
qcom,hw-settle-time = <0>;
|
|
qcom,fast-avg-setup = <0>;
|
|
};
|
|
|
|
chan@7 {
|
|
label = "vph_pwr";
|
|
reg = <7>;
|
|
qcom,decimation = <0>;
|
|
qcom,pre-div-channel-scaling = <1>;
|
|
qcom,calibration-type = "absolute";
|
|
qcom,scale-function = <0>;
|
|
qcom,hw-settle-time = <0>;
|
|
qcom,fast-avg-setup = <0>;
|
|
};
|
|
|
|
chan@73 {
|
|
label = "msm_therm";
|
|
reg = <0x73>;
|
|
qcom,decimation = <0>;
|
|
qcom,pre-div-channel-scaling = <0>;
|
|
qcom,calibration-type = "ratiometric";
|
|
qcom,scale-function = <2>;
|
|
qcom,hw-settle-time = <2>;
|
|
qcom,fast-avg-setup = <0>;
|
|
};
|
|
|
|
chan@74 {
|
|
label = "emmc_therm";
|
|
reg = <0x74>;
|
|
qcom,decimation = <0>;
|
|
qcom,pre-div-channel-scaling = <0>;
|
|
qcom,calibration-type = "ratiometric";
|
|
qcom,scale-function = <2>;
|
|
qcom,hw-settle-time = <2>;
|
|
qcom,fast-avg-setup = <0>;
|
|
};
|
|
|
|
chan@75 {
|
|
label = "pa_therm0";
|
|
reg = <0x75>;
|
|
qcom,decimation = <0>;
|
|
qcom,pre-div-channel-scaling = <0>;
|
|
qcom,calibration-type = "ratiometric";
|
|
qcom,scale-function = <2>;
|
|
qcom,hw-settle-time = <2>;
|
|
qcom,fast-avg-setup = <0>;
|
|
};
|
|
|
|
chan@77 {
|
|
label = "pa_therm1";
|
|
reg = <0x77>;
|
|
qcom,decimation = <0>;
|
|
qcom,pre-div-channel-scaling = <0>;
|
|
qcom,calibration-type = "ratiometric";
|
|
qcom,scale-function = <2>;
|
|
qcom,hw-settle-time = <2>;
|
|
qcom,fast-avg-setup = <0>;
|
|
};
|
|
|
|
chan@78 {
|
|
label = "quiet_therm";
|
|
reg = <0x78>;
|
|
qcom,decimation = <0>;
|
|
qcom,pre-div-channel-scaling = <0>;
|
|
qcom,calibration-type = "ratiometric";
|
|
qcom,scale-function = <2>;
|
|
qcom,hw-settle-time = <2>;
|
|
qcom,fast-avg-setup = <0>;
|
|
};
|
|
};
|
|
|
|
&pm8994_adc_tm {
|
|
chan@73 {
|
|
label = "msm_therm";
|
|
reg = <0x73>;
|
|
qcom,decimation = <0>;
|
|
qcom,pre-div-channel-scaling = <0>;
|
|
qcom,calibration-type = "ratiometric";
|
|
qcom,scale-function = <2>;
|
|
qcom,hw-settle-time = <2>;
|
|
qcom,fast-avg-setup = <0>;
|
|
qcom,btm-channel-number = <0x48>;
|
|
qcom,thermal-node;
|
|
};
|
|
|
|
chan@74 {
|
|
label = "emmc_therm";
|
|
reg = <0x74>;
|
|
qcom,decimation = <0>;
|
|
qcom,pre-div-channel-scaling = <0>;
|
|
qcom,calibration-type = "ratiometric";
|
|
qcom,scale-function = <2>;
|
|
qcom,hw-settle-time = <2>;
|
|
qcom,fast-avg-setup = <0>;
|
|
qcom,btm-channel-number = <0x68>;
|
|
qcom,thermal-node;
|
|
};
|
|
|
|
chan@75 {
|
|
label = "pa_therm0";
|
|
reg = <0x75>;
|
|
qcom,decimation = <0>;
|
|
qcom,pre-div-channel-scaling = <0>;
|
|
qcom,calibration-type = "ratiometric";
|
|
qcom,scale-function = <2>;
|
|
qcom,hw-settle-time = <2>;
|
|
qcom,fast-avg-setup = <0>;
|
|
qcom,btm-channel-number = <0x70>;
|
|
qcom,thermal-node;
|
|
};
|
|
|
|
chan@77 {
|
|
label = "pa_therm1";
|
|
reg = <0x77>;
|
|
qcom,decimation = <0>;
|
|
qcom,pre-div-channel-scaling = <0>;
|
|
qcom,calibration-type = "ratiometric";
|
|
qcom,scale-function = <2>;
|
|
qcom,hw-settle-time = <2>;
|
|
qcom,fast-avg-setup = <0>;
|
|
qcom,btm-channel-number = <0x78>;
|
|
qcom,thermal-node;
|
|
};
|
|
|
|
chan@78 {
|
|
label = "quiet_therm";
|
|
reg = <0x78>;
|
|
qcom,decimation = <0>;
|
|
qcom,pre-div-channel-scaling = <0>;
|
|
qcom,calibration-type = "ratiometric";
|
|
qcom,scale-function = <2>;
|
|
qcom,hw-settle-time = <2>;
|
|
qcom,fast-avg-setup = <0>;
|
|
qcom,btm-channel-number = <0x80>;
|
|
qcom,thermal-node;
|
|
};
|
|
};
|
|
|
|
&mdss_hdmi_tx {
|
|
pinctrl-names = "hdmi_hpd_active", "hdmi_ddc_active", "hdmi_cec_active",
|
|
"hdmi_active", "hdmi_sleep";
|
|
pinctrl-0 = <&mdss_hdmi_hpd_active &mdss_hdmi_ddc_suspend
|
|
&mdss_hdmi_cec_suspend>;
|
|
pinctrl-1 = <&mdss_hdmi_hpd_active &mdss_hdmi_ddc_active
|
|
&mdss_hdmi_cec_suspend>;
|
|
pinctrl-2 = <&mdss_hdmi_hpd_active &mdss_hdmi_cec_active
|
|
&mdss_hdmi_ddc_suspend>;
|
|
pinctrl-3 = <&mdss_hdmi_hpd_active &mdss_hdmi_ddc_active
|
|
&mdss_hdmi_cec_active>;
|
|
pinctrl-4 = <&mdss_hdmi_hpd_suspend &mdss_hdmi_ddc_suspend
|
|
&mdss_hdmi_cec_suspend>;
|
|
};
|
|
|
|
&pmi8994_charger {
|
|
qcom,dc-psy-type = "Wipower";
|
|
qcom,dcin-vadc = <&pmi8994_vadc>;
|
|
qcom,wipower-default-ilim-map = <4000000 20000000 550 700 300>;
|
|
qcom,wipower-pt-ilim-map = <4000000 7140000 550 700 300>,
|
|
<7140000 8140000 550 700 300>,
|
|
<8140000 9140000 500 700 300>,
|
|
<9140000 9950000 500 700 300>;
|
|
qcom,wipower-div2-ilim-map = <4000000 4820000 550 700 300>,
|
|
<4820000 5820000 550 700 300>,
|
|
<5820000 6820000 550 650 650>,
|
|
<6820000 7820000 550 700 600>,
|
|
<7820000 8500000 550 700 550>;
|
|
};
|
|
|
|
&pmi8994_vadc {
|
|
chan@0 {
|
|
label = "usbin";
|
|
reg = <0>;
|
|
qcom,decimation = <0>;
|
|
qcom,pre-div-channel-scaling = <4>;
|
|
qcom,calibration-type = "absolute";
|
|
qcom,scale-function = <0>;
|
|
qcom,hw-settle-time = <0>;
|
|
qcom,fast-avg-setup = <0>;
|
|
};
|
|
|
|
chan@1 {
|
|
label = "dcin";
|
|
reg = <1>;
|
|
qcom,decimation = <0>;
|
|
qcom,pre-div-channel-scaling = <4>;
|
|
qcom,calibration-type = "absolute";
|
|
qcom,scale-function = <0>;
|
|
qcom,hw-settle-time = <0>;
|
|
qcom,fast-avg-setup = <0>;
|
|
};
|
|
|
|
chan@43 {
|
|
label = "usb_dp";
|
|
reg = <0x43>;
|
|
qcom,decimation = <0>;
|
|
qcom,pre-div-channel-scaling = <1>;
|
|
qcom,calibration-type = "absolute";
|
|
qcom,scale-function = <0>;
|
|
qcom,hw-settle-time = <0>;
|
|
qcom,fast-avg-setup = <0>;
|
|
};
|
|
|
|
chan@44 {
|
|
label = "usb_dm";
|
|
reg = <0x44>;
|
|
qcom,decimation = <0>;
|
|
qcom,pre-div-channel-scaling = <1>;
|
|
qcom,calibration-type = "absolute";
|
|
qcom,scale-function = <0>;
|
|
qcom,hw-settle-time = <0>;
|
|
qcom,fast-avg-setup = <0>;
|
|
};
|
|
};
|
|
|
|
/{
|
|
mtp_batterydata: qcom,battery-data {
|
|
qcom,batt-id-range-pct = <15>;
|
|
#include "batterydata-itech-3000mah.dtsi"
|
|
};
|
|
};
|
|
|
|
&pmi8994_fg {
|
|
qcom,battery-data = <&mtp_batterydata>;
|
|
qcom,ext-sense-type;
|
|
qcom,fg-vbatt-low-threshold = <3700>;
|
|
};
|
|
|
|
&usb_otg_switch {
|
|
status = "okay";
|
|
};
|
|
|
|
&pm8994_mpps {
|
|
mpp@a300 { /* MPP 4 */
|
|
/* HDMI_5v_vreg regulator enable */
|
|
qcom,mode = <1>; /* Digital output */
|
|
qcom,output-type = <0>; /* CMOS logic */
|
|
qcom,vin-sel = <2>; /* S4 1.8V */
|
|
qcom,src-sel = <0>; /* Constant */
|
|
qcom,master-en = <1>; /* Enable GPIO */
|
|
qcom,invert = <0>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&pmi8994_gpios {
|
|
gpio@c100 { /* GPIO 2 SPKR_SD_N */
|
|
qcom,mode = <1>; /* DIGITAL OUT */
|
|
qcom,pull = <5>; /* No Pull */
|
|
qcom,vin-sel = <2>; /* 1.8 */
|
|
qcom,src-sel = <0>; /* CONSTANT */
|
|
qcom,master-en = <1>; /* ENABLE GPIO */
|
|
status = "okay";
|
|
};
|
|
|
|
gpio@c200 { /* GPIO 3 SPKR_SD_N */
|
|
qcom,mode = <1>; /* DIGITAL OUT */
|
|
qcom,pull = <5>; /* No Pull */
|
|
qcom,vin-sel = <2>; /* 1.8 */
|
|
qcom,src-sel = <0>; /* CONSTANT */
|
|
qcom,master-en = <1>; /* ENABLE GPIO */
|
|
status = "okay";
|
|
};
|
|
|
|
gpio@c400 { /* GPIO 5 - USB3 OTG SWITCH EN */
|
|
qcom,mode = <1>; /* Digital output */
|
|
qcom,vin-sel = <2>; /* 1.8 */
|
|
qcom,src-sel = <0>; /* GPIO */
|
|
qcom,master-en = <1>; /* Enable GPIO */
|
|
qcom,invert = <0>; /* Output low initially */
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&soc {
|
|
i2c@75ba000 {
|
|
synaptics@20 {
|
|
compatible = "synaptics,dsx";
|
|
reg = <0x20>;
|
|
interrupt-parent = <&tlmm>;
|
|
interrupts = <125 0x2008>;
|
|
vdd-supply = <&pm8994_l14>;
|
|
avdd-supply = <&pm8994_l22>;
|
|
pinctrl-names = "pmx_ts_active", "pmx_ts_suspend";
|
|
pinctrl-0 = <&ts_active>;
|
|
pinctrl-1 = <&ts_suspend>;
|
|
synaptics,display-coords = <0 0 1599 2559>;
|
|
synaptics,panel-coords = <0 0 1599 2703>;
|
|
synaptics,reset-gpio = <&tlmm 89 0x00>;
|
|
synaptics,irq-gpio = <&tlmm 125 0x2008>;
|
|
synaptics,disable-gpios;
|
|
};
|
|
};
|
|
|
|
gen-vkeys {
|
|
compatible = "qcom,gen-vkeys";
|
|
label = "synaptics_dsx";
|
|
qcom,disp-maxx = <1599>;
|
|
qcom,disp-maxy = <2559>;
|
|
qcom,panel-maxx = <1599>;
|
|
qcom,panel-maxy = <2703>;
|
|
qcom,key-codes = <158 139 102 217>;
|
|
};
|
|
|
|
|
|
gpio_keys {
|
|
compatible = "gpio-keys";
|
|
input-name = "gpio-keys";
|
|
|
|
home {
|
|
label = "home";
|
|
gpios = <&pm8994_gpios 1 0x1>;
|
|
linux,input-type = <1>;
|
|
linux,code = <102>;
|
|
gpio-key,wakeup;
|
|
debounce-interval = <15>;
|
|
};
|
|
|
|
vol_up {
|
|
label = "volume_up";
|
|
gpios = <&pm8994_gpios 2 0x1>;
|
|
linux,input-type = <1>;
|
|
linux,code = <115>;
|
|
gpio-key,wakeup;
|
|
debounce-interval = <15>;
|
|
};
|
|
|
|
cam_snapshot {
|
|
label = "cam_snapshot";
|
|
gpios = <&pm8994_gpios 4 0x1>;
|
|
linux,input-type = <1>;
|
|
linux,code = <766>;
|
|
gpio-key,wakeup;
|
|
debounce-interval = <15>;
|
|
};
|
|
|
|
cam_focus {
|
|
label = "cam_focus";
|
|
gpios = <&pm8994_gpios 5 0x1>;
|
|
linux,input-type = <1>;
|
|
linux,code = <528>;
|
|
gpio-key,wakeup;
|
|
debounce-interval = <15>;
|
|
};
|
|
};
|
|
|
|
sound-9335 {
|
|
qcom,model = "msm8996-tasha-fluid-snd-card";
|
|
qcom,hdmi-audio-rx;
|
|
asoc-codec = <&stub_codec>, <&hdmi_audio>;
|
|
asoc-codec-names = "msm-stub-codec.1",
|
|
"msm-hdmi-audio-codec-rx";
|
|
qcom,wsa-max-devs = <1>;
|
|
qcom,wsa-devs = <&wsa881x_211>, <&wsa881x_213>;
|
|
qcom,wsa-aux-dev-prefix = "SpkrLeft", "SpkrLeft";
|
|
};
|
|
|
|
};
|
|
|
|
&pm8994_gpios {
|
|
gpio@c700 { /* GPIO 8 - WLAN_EN */
|
|
qcom,mode = <1>; /* Digital output*/
|
|
qcom,pull = <4>; /* Pulldown 10uA */
|
|
qcom,vin-sel = <2>; /* VIN2 */
|
|
qcom,src-sel = <0>; /* GPIO */
|
|
qcom,invert = <0>; /* Invert */
|
|
qcom,master-en = <1>; /* Enable GPIO */
|
|
status = "okay";
|
|
};
|
|
|
|
gpio@c800 { /* GPIO 9 - Rome 3.3V control */
|
|
qcom,mode = <1>; /* Digital output */
|
|
qcom,output-type = <0>; /* MOS logic */
|
|
qcom,invert = <1>; /* Output high */
|
|
qcom,vin-sel = <0>; /* VPH_PWR */
|
|
qcom,src-sel = <0>; /* Constant */
|
|
qcom,out-strength = <1>; /* High drive strength */
|
|
qcom,master-en = <1>; /* Enable GPIO */
|
|
status = "okay";
|
|
};
|
|
|
|
gpio@cd00 { /* GPIO 14 - lcd_bklt_reg_en */
|
|
qcom,mode = <1>; /* DIGITAL OUT */
|
|
qcom,output-type = <0>; /* CMOS logic */
|
|
qcom,invert = <1>; /* output hight initially */
|
|
qcom,vin-sel = <2>; /* 1.8 */
|
|
qcom,src-sel = <0>; /* CONSTANT */
|
|
qcom,out-strength = <1>; /* Low drive strength */
|
|
qcom,master-en = <1>; /* ENABLE GPIO */
|
|
status = "okay";
|
|
};
|
|
|
|
gpio@c000 { /* GPIO 1 */
|
|
qcom,mode = <0>;
|
|
qcom,pull = <0>;
|
|
qcom,vin-sel = <2>;
|
|
qcom,src-sel = <0>;
|
|
status = "okay";
|
|
};
|
|
|
|
gpio@c100 { /* GPIO 2 */
|
|
qcom,mode = <0>;
|
|
qcom,pull = <0>;
|
|
qcom,vin-sel = <2>;
|
|
qcom,src-sel = <0>;
|
|
status = "okay";
|
|
};
|
|
|
|
gpio@c300 { /* GPIO 4 */
|
|
qcom,mode = <0>;
|
|
qcom,pull = <0>;
|
|
qcom,vin-sel = <2>;
|
|
qcom,src-sel = <0>;
|
|
status = "okay";
|
|
};
|
|
|
|
gpio@c400 { /* GPIO 5 */
|
|
qcom,mode = <0>;
|
|
qcom,pull = <0>;
|
|
qcom,vin-sel = <2>;
|
|
qcom,src-sel = <0>;
|
|
status = "okay";
|
|
};
|
|
|
|
gpio@ce00 { /* GPIO 15 */
|
|
qcom,mode = <1>;
|
|
qcom,output-type = <0>;
|
|
qcom,pull = <5>;
|
|
qcom,vin-sel = <2>;
|
|
qcom,out-strength = <1>;
|
|
qcom,src-sel = <2>;
|
|
qcom,master-en = <1>;
|
|
status = "okay";
|
|
};
|
|
|
|
gpio@d100 { /* GPIO 18 - Rome Sleep Clock */
|
|
qcom,mode = <1>; /* Digital output */
|
|
qcom,output-type = <0>; /* CMOS logic */
|
|
qcom,invert = <0>; /* Output low initially */
|
|
qcom,vin-sel = <2>; /* VIN 2 */
|
|
qcom,src-sel = <3>; /* Function 2 */
|
|
qcom,out-strength = <2>; /* Medium */
|
|
qcom,master-en = <1>; /* Enable GPIO */
|
|
status = "okay";
|
|
};
|
|
|
|
gpio@d200 { /* GPIO 19 - Rome BT Reset */
|
|
qcom,mode = <1>; /* Digital output*/
|
|
qcom,pull = <4>; /* Pulldown 10uA */
|
|
qcom,vin-sel = <2>; /* VIN2 */
|
|
qcom,src-sel = <0>; /* GPIO */
|
|
qcom,invert = <0>; /* Invert */
|
|
qcom,master-en = <1>; /* Enable GPIO */
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&pmi8994_haptics {
|
|
status = "okay";
|
|
};
|
|
|
|
&flash_led {
|
|
qcom,follow-otst2-rb-disabled;
|
|
};
|
|
|
|
&blsp1_uart2 {
|
|
status = "ok";
|
|
};
|
|
|
|
#include "msm8996-mdss-panels.dtsi"
|
|
|
|
&mdss_mdp {
|
|
qcom,mdss-pref-prim-intf = "dsi";
|
|
};
|
|
|
|
&mdss_dsi {
|
|
hw-config = "split_dsi";
|
|
};
|
|
|
|
&mdss_dsi0 {
|
|
qcom,dsi-pref-prim-pan = <&dsi_dual_sharp_video>;
|
|
pinctrl-names = "mdss_default", "mdss_sleep";
|
|
pinctrl-0 = <&mdss_dsi_active &mdss_te_active>;
|
|
pinctrl-1 = <&mdss_dsi_suspend &mdss_te_suspend>;
|
|
qcom,dsi-panel-bias-vreg;
|
|
qcom,platform-reset-gpio = <&tlmm 8 0>;
|
|
};
|
|
|
|
&mdss_dsi1 {
|
|
qcom,dsi-pref-prim-pan = <&dsi_dual_sharp_video>;
|
|
};
|
|
|
|
&dsi_dual_sharp_video {
|
|
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
|
|
qcom,mdss-dsi-bl-min-level = <1>;
|
|
qcom,mdss-dsi-bl-max-level = <4095>;
|
|
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
|
|
};
|
|
|
|
&labibb {
|
|
status = "ok";
|
|
qpnp,qpnp-labibb-mode = "lcd";
|
|
};
|
|
|
|
&pmi8994_mpps {
|
|
mpp@a000 { /* MPP 1 */
|
|
qcom,mode = <1>; /* Digital output */
|
|
qcom,output-type = <0>; /* CMOS logic */
|
|
qcom,vin-sel = <0>; /* S4 1.8V */
|
|
qcom,src-sel = <7>; /* DTEST4 */
|
|
qcom,master-en = <1>; /* Enable MPP */
|
|
status = "okay";
|
|
};
|
|
|
|
mpp@a300 { /* MPP 4 */
|
|
/* WLED FET */
|
|
qcom,mode = <1>; /* DIGITAL OUT */
|
|
qcom,vin-sel = <0>; /* VIN0 */
|
|
qcom,master-en = <1>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&wil6210 {
|
|
status = "ok";
|
|
};
|