1902 lines
32 KiB
Plaintext
1902 lines
32 KiB
Plaintext
/*
|
|
* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 and
|
|
* only version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
&soc {
|
|
msm_gpio: pinctrl@1000000 {
|
|
compatible = "qcom,msm8952-pinctrl";
|
|
reg = <0x1000000 0x300000>;
|
|
interrupts = <0 208 0>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
|
|
pmx-uartconsole {
|
|
uart_console_active: uart_console_active {
|
|
mux {
|
|
pins = "gpio4", "gpio5";
|
|
function = "blsp_uart2";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio4", "gpio5";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
uart_console_sleep: uart_console_sleep {
|
|
mux {
|
|
pins = "gpio4", "gpio5";
|
|
function = "blsp_uart2";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio4", "gpio5";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
};
|
|
|
|
cdc-pdm-lines {
|
|
cdc_pdm_lines_act: pdm_lines_on {
|
|
mux {
|
|
pins = "gpio69", "gpio73", "gpio74";
|
|
function = "cdc_pdm0";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio69", "gpio73", "gpio74";
|
|
drive-strength = <8>;
|
|
};
|
|
};
|
|
cdc_pdm_lines_sus: pdm_lines_off {
|
|
mux {
|
|
pins = "gpio69", "gpio73", "gpio74";
|
|
function = "cdc_pdm0";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio69", "gpio73", "gpio74";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
cdc-pdm-2-lines {
|
|
cdc_pdm_lines_2_act: pdm_lines_2_on {
|
|
mux {
|
|
pins = "gpio70", "gpio71", "gpio72";
|
|
function = "cdc_pdm0";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio70", "gpio71", "gpio72";
|
|
drive-strength = <8>;
|
|
};
|
|
};
|
|
|
|
cdc_pdm_lines_2_sus: pdm_lines_2_off {
|
|
mux {
|
|
pins = "gpio70", "gpio71", "gpio72";
|
|
function = "cdc_pdm0";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio70", "gpio71", "gpio72";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
cross-conn-det {
|
|
cross_conn_det_act: lines_on {
|
|
mux {
|
|
pins = "gpio63";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio63";
|
|
drive-strength = <8>;
|
|
output-low;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
cross_conn_det_sus: lines_off {
|
|
mux {
|
|
pins = "gpio63";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio63";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
};
|
|
|
|
hsuart_active: default {
|
|
mux {
|
|
pins = "gpio0", "gpio1", "gpio2", "gpio3";
|
|
function = "blsp_uart1";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio0", "gpio1", "gpio2", "gpio3";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
hsuart_sleep: sleep {
|
|
mux {
|
|
pins = "gpio0", "gpio1", "gpio2", "gpio3";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio0", "gpio1", "gpio2", "gpio3";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
sdhc2_cd_pin {
|
|
sdc2_cd_on: cd_on {
|
|
mux {
|
|
pins = "gpio67";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio67";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
sdc2_cd_off: cd_off {
|
|
mux {
|
|
pins = "gpio67";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio67";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
trigout_a0: trigout_a0 {
|
|
mux {
|
|
pins = "gpio41";
|
|
function = "qdss_cti_trig_out_a0";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio41";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
pmx_sdc1_rclk {
|
|
sdc1_rclk_on: sdc1_rclk_on {
|
|
config {
|
|
pins = "sdc1_rclk";
|
|
bias-pull-down; /* pull down */
|
|
};
|
|
};
|
|
|
|
sdc1_rclk_off: sdc1_rclk_off {
|
|
config {
|
|
pins = "sdc1_rclk";
|
|
bias-pull-down; /* pull down */
|
|
};
|
|
};
|
|
};
|
|
|
|
pmx_sdc1_clk {
|
|
sdc1_clk_on: sdc1_clk_on {
|
|
config {
|
|
pins = "sdc1_clk";
|
|
bias-disable; /* NO pull */
|
|
drive-strength = <16>; /* 16 MA */
|
|
};
|
|
|
|
};
|
|
|
|
sdc1_clk_off: sdc1_clk_off {
|
|
config {
|
|
pins = "sdc1_clk";
|
|
bias-disable; /* NO pull */
|
|
drive-strength = <2>; /* 2 MA */
|
|
};
|
|
};
|
|
};
|
|
|
|
pmx_sdc1_cmd {
|
|
sdc1_cmd_on: sdc1_cmd_on {
|
|
config {
|
|
pins = "sdc1_cmd";
|
|
bias-pull-up; /* pull up */
|
|
drive-strength = <10>; /* 10 MA */
|
|
};
|
|
};
|
|
|
|
sdc1_cmd_off: sdc1_cmd_off {
|
|
config {
|
|
pins = "sdc1_cmd";
|
|
bias-pull-up; /* pull up */
|
|
drive-strength = <2>; /* 2 MA */
|
|
};
|
|
};
|
|
};
|
|
|
|
pmx_sdc1_data {
|
|
sdc1_data_on: sdc1_data_on {
|
|
config {
|
|
pins = "sdc1_data";
|
|
bias-pull-up; /* pull up */
|
|
drive-strength = <10>; /* 10 MA */
|
|
};
|
|
};
|
|
|
|
sdc1_data_off: sdc1_data_off {
|
|
config {
|
|
pins = "sdc1_data";
|
|
bias-pull-up; /* pull up */
|
|
drive-strength = <2>; /* 2 MA */
|
|
};
|
|
};
|
|
};
|
|
|
|
pmx_sdc2_clk {
|
|
sdc2_clk_on: sdc2_clk_on {
|
|
config {
|
|
pins = "sdc2_clk";
|
|
drive-strength = <16>; /* 16 MA */
|
|
bias-disable; /* NO pull */
|
|
};
|
|
};
|
|
|
|
sdc2_clk_off: sdc2_clk_off {
|
|
config {
|
|
pins = "sdc2_clk";
|
|
bias-disable; /* NO pull */
|
|
drive-strength = <2>; /* 2 MA */
|
|
};
|
|
};
|
|
};
|
|
|
|
pmx_sdc2_cmd {
|
|
sdc2_cmd_on: sdc2_cmd_on {
|
|
config {
|
|
pins = "sdc2_cmd";
|
|
bias-pull-up; /* pull up */
|
|
drive-strength = <10>; /* 10 MA */
|
|
};
|
|
};
|
|
|
|
sdc2_cmd_off: sdc2_cmd_off {
|
|
config {
|
|
pins = "sdc2_cmd";
|
|
bias-pull-up; /* pull up */
|
|
drive-strength = <2>; /* 2 MA */
|
|
};
|
|
};
|
|
};
|
|
|
|
pmx_sdc2_data {
|
|
sdc2_data_on: sdc2_data_on {
|
|
config {
|
|
pins = "sdc2_data";
|
|
bias-pull-up; /* pull up */
|
|
drive-strength = <10>; /* 10 MA */
|
|
};
|
|
};
|
|
|
|
sdc2_data_off: sdc2_data_off {
|
|
config {
|
|
pins = "sdc2_data";
|
|
bias-pull-up; /* pull up */
|
|
drive-strength = <2>; /* 2 MA */
|
|
};
|
|
};
|
|
};
|
|
|
|
spi0 {
|
|
|
|
spi0_default: spi0_default {
|
|
/* active state */
|
|
mux {
|
|
/* MOSI, MISO, CLK */
|
|
pins = "gpio0", "gpio1", "gpio3";
|
|
function = "blsp_spi1";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio0", "gpio1", "gpio3";
|
|
drive-strength = <12>; /* 12 MA */
|
|
bias-disable = <0>; /* No PULL */
|
|
};
|
|
};
|
|
|
|
|
|
spi0_sleep: spi0_sleep {
|
|
/* suspended state */
|
|
mux {
|
|
/* MOSI, MISO, CLK */
|
|
pins = "gpio0", "gpio1", "gpio3";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio0", "gpio1", "gpio3";
|
|
drive-strength = <2>; /* 2 MA */
|
|
bias-pull-down; /* PULL Down */
|
|
};
|
|
};
|
|
|
|
spi0_cs0_active: cs0_active {
|
|
/* CS */
|
|
mux {
|
|
pins = "gpio2";
|
|
function = "blsp_spi1";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio2";
|
|
drive-strength = <2>;
|
|
bias-disable = <0>;
|
|
};
|
|
};
|
|
|
|
spi0_cs0_sleep: cs0_sleep {
|
|
/* CS */
|
|
mux {
|
|
pins = "gpio2";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio2";
|
|
drive-strength = <2>;
|
|
bias-disable = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
|
|
cci {
|
|
|
|
cci0_active: cci0_active {
|
|
/* cci0 active state */
|
|
mux {
|
|
/* CLK, DATA */
|
|
pins = "gpio29", "gpio30";
|
|
function = "cci_i2c";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio29", "gpio30";
|
|
drive-strength = <2>; /* 2 MA */
|
|
bias-disable; /* No PULL */
|
|
};
|
|
};
|
|
|
|
cci0_suspend: cci0_suspend {
|
|
/* cci0 suspended state */
|
|
mux {
|
|
/* CLK, DATA */
|
|
pins = "gpio29", "gpio30";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio29", "gpio30";
|
|
drive-strength = <2>; /* 2 MA */
|
|
bias-disable; /* No PULL */
|
|
};
|
|
};
|
|
|
|
cci1_active: cci1_active {
|
|
/* cci1 active state */
|
|
mux {
|
|
/* CLK, DATA */
|
|
pins = "gpio31", "gpio32";
|
|
function = "cci_i2c";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio31", "gpio32";
|
|
drive-strength = <2>; /* 2 MA */
|
|
bias-disable; /* No PULL */
|
|
};
|
|
};
|
|
|
|
cci1_suspend: cci1_suspend {
|
|
/* cci1 suspended state */
|
|
mux {
|
|
/* CLK, DATA */
|
|
pins = "gpio31", "gpio32";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio31", "gpio32";
|
|
drive-strength = <2>; /* 2 MA */
|
|
bias-disable; /* No PULL */
|
|
};
|
|
};
|
|
};
|
|
|
|
pmx_mdss {
|
|
mdss_dsi_active: mdss_dsi_active {
|
|
mux {
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
drive-strength = <8>; /* 8 mA */
|
|
bias-disable = <0>; /* no pull */
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
mdss_dsi_suspend: mdss_dsi_suspend {
|
|
mux {
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
drive-strength = <2>; /* 2 mA */
|
|
bias-pull-down; /* pull down */
|
|
output-low;
|
|
};
|
|
};
|
|
};
|
|
|
|
pmx_mdss_te {
|
|
mdss_te_active: mdss_te_active {
|
|
mux {
|
|
function = "mdp_vsync";
|
|
};
|
|
|
|
config {
|
|
drive-strength = <2>; /* 2 mA */
|
|
bias-pull-down; /* pull down */
|
|
input-debounce = <0>;
|
|
};
|
|
};
|
|
|
|
mdss_te_suspend: mdss_te_suspend {
|
|
mux {
|
|
function = "mdp_vsync";
|
|
};
|
|
|
|
config {
|
|
drive-strength = <2>; /* 2 mA */
|
|
bias-pull-down; /* pull down */
|
|
input-debounce = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
pmx_qdsd_clk {
|
|
qdsd_clk_sdcard: clk_sdcard {
|
|
config {
|
|
pins = "qdsd_clk";
|
|
bias-disable; /* NO pull */
|
|
drive-strength = <7>; /* 7 MA */
|
|
};
|
|
};
|
|
qdsd_clk_trace: clk_trace {
|
|
config {
|
|
pins = "qdsd_clk";
|
|
bias-pull-down; /* pull down */
|
|
drive-strength = <0>; /* 0 MA */
|
|
};
|
|
};
|
|
qdsd_clk_swdtrc: clk_swdtrc {
|
|
config {
|
|
pins = "qdsd_clk";
|
|
bias-pull-down; /* pull down */
|
|
drive-strength = <0>; /* 0 MA */
|
|
};
|
|
};
|
|
qdsd_clk_spmi: clk_spmi {
|
|
config {
|
|
pins = "qdsd_clk";
|
|
bias-pull-down; /* pull down */
|
|
drive-strength = <0>; /* 0 MA */
|
|
};
|
|
};
|
|
};
|
|
|
|
pmx_qdsd_cmd {
|
|
qdsd_cmd_sdcard: cmd_sdcard {
|
|
config {
|
|
pins = "qdsd_cmd";
|
|
bias-pull-down; /* pull down */
|
|
drive-strength = <3>; /* 3 MA */
|
|
};
|
|
};
|
|
qdsd_cmd_trace: cmd_trace {
|
|
config {
|
|
pins = "qdsd_cmd";
|
|
bias-pull-down; /* pull down */
|
|
drive-strength = <0>; /* 0 MA */
|
|
};
|
|
};
|
|
qdsd_cmd_swduart: cmd_uart {
|
|
config {
|
|
pins = "qdsd_cmd";
|
|
bias-pull-up; /* pull up */
|
|
drive-strength = <0>; /* 0 MA */
|
|
};
|
|
};
|
|
qdsd_cmd_swdtrc: cmd_swdtrc {
|
|
config {
|
|
pins = "qdsd_cmd";
|
|
bias-pull-up; /* pull up */
|
|
drive-strength = <0>; /* 0 MA */
|
|
};
|
|
};
|
|
qdsd_cmd_jtag: cmd_jtag {
|
|
config {
|
|
pins = "qdsd_cmd";
|
|
bias-disable; /* NO pull */
|
|
drive-strength = <3>; /* 3 MA */
|
|
};
|
|
};
|
|
qdsd_cmd_spmi: cmd_spmi {
|
|
config {
|
|
pins = "qdsd_cmd";
|
|
bias-pull-down; /* pull down */
|
|
drive-strength = <4>; /* 4 MA */
|
|
};
|
|
};
|
|
};
|
|
|
|
pmx_qdsd_data0 {
|
|
qdsd_data0_sdcard: data0_sdcard {
|
|
config {
|
|
pins = "qdsd_data0";
|
|
bias-pull-down; /* pull down */
|
|
drive-strength = <3>; /* 3 MA */
|
|
};
|
|
};
|
|
qdsd_data0_trace: data0_trace {
|
|
config {
|
|
pins = "qdsd_data0";
|
|
bias-pull-down; /* pull down */
|
|
drive-strength = <3>; /* 3 MA */
|
|
};
|
|
};
|
|
qdsd_data0_swduart: data0_uart {
|
|
config {
|
|
pins = "qdsd_data0";
|
|
bias-pull-down; /* pull down */
|
|
drive-strength = <0>; /* 0 MA */
|
|
};
|
|
};
|
|
qdsd_data0_swdtrc: data0_swdtrc {
|
|
config {
|
|
pins = "qdsd_data0";
|
|
bias-pull-down; /* pull down */
|
|
drive-strength = <0>; /* 0 MA */
|
|
};
|
|
};
|
|
qdsd_data0_jtag: data0_jtag {
|
|
config {
|
|
pins = "qdsd_data0";
|
|
bias-pull-up; /* pull up */
|
|
drive-strength = <0>; /* 0 MA */
|
|
};
|
|
};
|
|
qdsd_data0_spmi: data0_spmi {
|
|
config {
|
|
pins = "qdsd_data0";
|
|
bias-pull-down; /* pull down */
|
|
drive-strength = <0>; /* 0 MA */
|
|
};
|
|
};
|
|
};
|
|
|
|
pmx_qdsd_data1 {
|
|
qdsd_data1_sdcard: data1_sdcard {
|
|
config {
|
|
pins = "qdsd_data1";
|
|
bias-pull-down; /* pull down */
|
|
drive-strength = <3>; /* 3 MA */
|
|
};
|
|
};
|
|
qdsd_data1_trace: data1_trace {
|
|
config {
|
|
pins = "qdsd_data1";
|
|
bias-pull-down; /* pull down */
|
|
drive-strength = <3>; /* 3 MA */
|
|
};
|
|
};
|
|
qdsd_data1_swduart: data1_uart {
|
|
config {
|
|
pins = "qdsd_data1";
|
|
bias-pull-down; /* pull down */
|
|
drive-strength = <0>; /* 0 MA */
|
|
};
|
|
};
|
|
qdsd_data1_swdtrc: data1_swdtrc {
|
|
config {
|
|
pins = "qdsd_data1";
|
|
bias-pull-down; /* pull down */
|
|
drive-strength = <0>; /* 0 MA */
|
|
};
|
|
};
|
|
qdsd_data1_jtag: data1_jtag {
|
|
config {
|
|
pins = "qdsd_data1";
|
|
bias-pull-down; /* pull down */
|
|
drive-strength = <0>; /* 0 MA */
|
|
};
|
|
};
|
|
};
|
|
|
|
pmx_qdsd_data2 {
|
|
qdsd_data2_sdcard: data2_sdcard {
|
|
config {
|
|
pins = "qdsd_data2";
|
|
bias-pull-down; /* pull down */
|
|
drive-strength = <3>; /* 3 MA */
|
|
};
|
|
};
|
|
qdsd_data2_trace: data2_trace {
|
|
config {
|
|
pins = "qdsd_data2";
|
|
bias-pull-down; /* pull down */
|
|
drive-strength = <3>; /* 3 MA */
|
|
};
|
|
};
|
|
qdsd_data2_swduart: data2_uart {
|
|
config {
|
|
pins = "qdsd_data2";
|
|
bias-pull-down; /* pull down */
|
|
drive-strength = <0>; /* 0 MA */
|
|
};
|
|
};
|
|
qdsd_data2_swdtrc: data2_swdtrc {
|
|
config {
|
|
pins = "qdsd_data2";
|
|
bias-pull-down; /* pull down */
|
|
drive-strength = <0>; /* 0 MA */
|
|
};
|
|
};
|
|
qdsd_data2_jtag: data2_jtag {
|
|
config {
|
|
pins = "qdsd_data2";
|
|
bias-pull-up; /* pull up */
|
|
drive-strength = <3>; /* 3 MA */
|
|
};
|
|
};
|
|
};
|
|
|
|
pmx_qdsd_data3 {
|
|
qdsd_data3_sdcard: data3_sdcard {
|
|
config {
|
|
pins = "qdsd_data3";
|
|
bias-pull-down; /* pull down */
|
|
drive-strength = <3>; /* 3 MA */
|
|
};
|
|
};
|
|
qdsd_data3_trace: data3_trace {
|
|
config {
|
|
pins = "qdsd_data3";
|
|
bias-pull-down; /* pull down */
|
|
drive-strength = <3>; /* 3 MA */
|
|
};
|
|
};
|
|
qdsd_data3_swduart: data3_uart {
|
|
config {
|
|
pins = "qdsd_data3";
|
|
bias-pull-up; /* pull up */
|
|
drive-strength = <0>; /* 0 MA */
|
|
};
|
|
};
|
|
qdsd_data3_swdtrc: data3_swdtrc {
|
|
config {
|
|
pins = "qdsd_data3";
|
|
bias-pull-up; /* pull up */
|
|
drive-strength = <0>; /* 0 MA */
|
|
};
|
|
};
|
|
qdsd_data3_jtag: data3_jtag {
|
|
config {
|
|
pins = "qdsd_data3";
|
|
bias-pull-up; /* pull up */
|
|
drive-strength = <0>; /* 0 MA */
|
|
};
|
|
};
|
|
qdsd_data3_spmi: data3_spmi {
|
|
config {
|
|
pins = "qdsd_data3";
|
|
bias-pull-down; /* pull down */
|
|
drive-strength = <3>; /* 3 MA */
|
|
};
|
|
};
|
|
};
|
|
|
|
pmx_i2c_2 {
|
|
/* active state */
|
|
i2c_2_active: i2c_2_active{
|
|
mux {
|
|
/* CLK, DATA */
|
|
pins = "gpio6", "gpio7";
|
|
function = "blsp_i2c2";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio6", "gpio7";
|
|
drive-strength = <2>; /* 2 MA */
|
|
bias-disable; /* No PULL */
|
|
};
|
|
};
|
|
|
|
/* suspended state */
|
|
i2c_2_sleep: i2c_2_sleep {
|
|
mux {
|
|
/* CLK, DATA */
|
|
pins = "gpio6", "gpio7";
|
|
function = "blsp_i2c2";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio6", "gpio7";
|
|
drive-strength = <2>; /* 2 MA */
|
|
bias-disable; /* No PULL */
|
|
};
|
|
};
|
|
};
|
|
|
|
pmx_i2c_5 {
|
|
/* active state */
|
|
i2c_5_active: i2c_5_active{
|
|
mux {
|
|
/* CLK, DATA */
|
|
pins = "gpio18", "gpio19";
|
|
function = "blsp_i2c5";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio18", "gpio19";
|
|
drive-strength = <2>; /* 2 MA */
|
|
bias-disable; /* No PULL */
|
|
};
|
|
};
|
|
|
|
/* suspended state */
|
|
i2c_5_sleep: i2c_5_sleep {
|
|
mux {
|
|
/* CLK, DATA */
|
|
pins = "gpio18", "gpio19";
|
|
function = "blsp_i2c5";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio18", "gpio19";
|
|
drive-strength = <2>; /* 2 MA */
|
|
bias-disable; /* No PULL */
|
|
};
|
|
};
|
|
};
|
|
|
|
/* WSA Reset */
|
|
wsa_reset {
|
|
wsa_reset_on: wsa_reset_on {
|
|
mux {
|
|
pins = "gpio68";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio68";
|
|
drive-strength = <2>; /* 2 MA */
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
wsa_reset_off: wsa_reset_off {
|
|
mux {
|
|
pins = "gpio68";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio68";
|
|
drive-strength = <2>; /* 2 MA */
|
|
output-low;
|
|
};
|
|
};
|
|
};
|
|
|
|
/* WSA CLK */
|
|
wsa_clk {
|
|
wsa_clk_on: wsa_clk_on {
|
|
mux {
|
|
pins = "gpio25";
|
|
function = "pri_mi2s_mclk_a";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio25";
|
|
drive-strength = <8>; /* 8 MA */
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
wsa_clk_off: wsa_clk_off {
|
|
mux {
|
|
pins = "gpio25";
|
|
function = "pri_mi2s_mclk_a";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio25";
|
|
drive-strength = <2>; /* 2 MA */
|
|
output-low;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
};
|
|
|
|
/* WSA VI sense */
|
|
wsa-vi {
|
|
wsa_vi_on: wsa_vi_on {
|
|
mux {
|
|
pins = "gpio94", "gpio95";
|
|
function = "wsa_io";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio94", "gpio95";
|
|
drive-strength = <8>; /* 8 MA */
|
|
bias-disable; /* NO pull */
|
|
};
|
|
};
|
|
|
|
wsa_vi_off: wsa_vi_off {
|
|
mux {
|
|
pins = "gpio94", "gpio95";
|
|
function = "wsa_io";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio94", "gpio95";
|
|
drive-strength = <2>; /* 2 MA */
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
};
|
|
/*sensors */
|
|
cam_sensor_mclk0_default: cam_sensor_mclk0_default {
|
|
/* MCLK0 */
|
|
mux {
|
|
/* CLK, DATA */
|
|
pins = "gpio26";
|
|
function = "cam_mclk";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio26";
|
|
bias-disable; /* No PULL */
|
|
drive-strength = <2>; /* 2 MA */
|
|
};
|
|
};
|
|
|
|
cam_sensor_mclk0_sleep: cam_sensor_mclk0_sleep {
|
|
/* MCLK0 */
|
|
mux {
|
|
/* CLK, DATA */
|
|
pins = "gpio26";
|
|
function = "cam_mclk";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio26";
|
|
bias-pull-down; /* PULL DOWN */
|
|
drive-strength = <2>; /* 2 MA */
|
|
};
|
|
};
|
|
|
|
cam_sensor_rear_default: cam_sensor_rear_default {
|
|
/* RESET, STANDBY */
|
|
mux {
|
|
pins = "gpio36", "gpio35";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio36","gpio35";
|
|
bias-disable; /* No PULL */
|
|
drive-strength = <2>; /* 2 MA */
|
|
};
|
|
};
|
|
|
|
cam_sensor_rear_sleep: cam_sensor_rear_sleep {
|
|
/* RESET, STANDBY */
|
|
mux {
|
|
pins = "gpio36","gpio35";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio36","gpio35";
|
|
bias-disable; /* No PULL */
|
|
drive-strength = <2>; /* 2 MA */
|
|
};
|
|
};
|
|
|
|
cam_sensor_mclk1_default: cam_sensor_mclk1_default {
|
|
/* MCLK1 */
|
|
mux {
|
|
/* CLK, DATA */
|
|
pins = "gpio27";
|
|
function = "cam_mclk";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio27";
|
|
bias-disable; /* No PULL */
|
|
drive-strength = <2>; /* 2 MA */
|
|
};
|
|
};
|
|
|
|
cam_sensor_mclk1_sleep: cam_sensor_mclk1_sleep {
|
|
/* MCLK1 */
|
|
mux {
|
|
/* CLK, DATA */
|
|
pins = "gpio27";
|
|
function = "cam_mclk";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio27";
|
|
bias-pull-down; /* PULL DOWN */
|
|
drive-strength = <2>; /* 2 MA */
|
|
};
|
|
};
|
|
|
|
cam_sensor_front_default: cam_sensor_front_default {
|
|
/* RESET, STANDBY */
|
|
mux {
|
|
pins = "gpio38","gpio37";
|
|
function = "cam2_rst";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio38","gpio37";
|
|
bias-disable; /* No PULL */
|
|
drive-strength = <2>; /* 2 MA */
|
|
};
|
|
};
|
|
|
|
cam_sensor_front_sleep: cam_sensor_front_sleep {
|
|
/* RESET, STANDBY */
|
|
mux {
|
|
pins = "gpio38","gpio37";
|
|
function = "cam2_rst";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio38","gpio37";
|
|
bias-disable; /* No PULL */
|
|
drive-strength = <2>; /* 2 MA */
|
|
};
|
|
};
|
|
|
|
cam_sensor_mclk2_default: cam_sensor_mclk2_default {
|
|
/* MCLK2 */
|
|
mux {
|
|
/* CLK, DATA */
|
|
pins = "gpio28";
|
|
function = "cam_mclk";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio28";
|
|
bias-disable; /* No PULL */
|
|
drive-strength = <2>; /* 2 MA */
|
|
};
|
|
};
|
|
|
|
cam_sensor_mclk2_sleep: cam_sensor_mclk2_sleep {
|
|
/* MCLK2 */
|
|
mux {
|
|
/* CLK, DATA */
|
|
pins = "gpio28";
|
|
function = "cam_mclk";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio28";
|
|
bias-pull-down; /* PULL DOWN */
|
|
drive-strength = <2>; /* 2 MA */
|
|
};
|
|
};
|
|
|
|
cam_sensor_front1_default: cam_sensor_front1_default {
|
|
/* RESET, STANDBY */
|
|
mux {
|
|
pins = "gpio40", "gpio39";
|
|
function = "webcam_rst";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio40", "gpio39";
|
|
bias-disable; /* No PULL */
|
|
drive-strength = <2>; /* 2 MA */
|
|
};
|
|
};
|
|
|
|
cam_sensor_front1_sleep: cam_sensor_front1_sleep {
|
|
/* RESET, STANDBY */
|
|
mux {
|
|
pins = "gpio40", "gpio39";
|
|
function = "webcam_rst";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio40", "gpio39";
|
|
bias-disable; /* No PULL */
|
|
drive-strength = <2>; /* 2 MA */
|
|
};
|
|
};
|
|
|
|
cam_sensor_ext_gpio_default: cam_sensor_ext_gpio_default {
|
|
cam_sensor_ext_gpio_default {
|
|
/* RESET, STANDBY active state */
|
|
pins = "gpio130", "gpio131";
|
|
function = "gpio";
|
|
drive-strength = <2>; /* 2 MA */
|
|
bias-disable; /* No PULL */
|
|
};
|
|
};
|
|
|
|
cam_sensor_ext_gpio_sleep: cam_sensor_ext_gpio_sleep {
|
|
cam_sensor_ext_gpio_sleep {
|
|
/* RESET, STANDBY susppend state */
|
|
pins = "gpio130", "gpio131";
|
|
function = "gpio";
|
|
drive-strength = <2>; /* 2 MA */
|
|
bias-disable; /* No PULL */
|
|
};
|
|
};
|
|
|
|
/* CoreSight */
|
|
tpiu_seta_1 {
|
|
seta_1: seta {
|
|
mux {
|
|
pins = "gpio16";
|
|
function = "qdss_traceclk_a";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio16";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu_seta_2 {
|
|
seta_2: seta {
|
|
mux {
|
|
pins = "gpio18";
|
|
function = "qdss_tracectl_a";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio18";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu_seta_3 {
|
|
seta_3: seta {
|
|
mux {
|
|
pins = "gpio19";
|
|
function = "qdss_tracedata_a";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio19";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu_seta_4 {
|
|
seta_4: seta {
|
|
mux {
|
|
pins = "gpio26";
|
|
function = "qdss_tracedata_a";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio26";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu_seta_5 {
|
|
seta_5: seta {
|
|
mux {
|
|
pins = "gpio27";
|
|
function = "qdss_tracedata_a";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio27";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu_seta_6 {
|
|
seta_6: seta {
|
|
mux {
|
|
pins = "gpio28";
|
|
function = "qdss_tracedata_a";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio28";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu_seta_7 {
|
|
seta_7: seta {
|
|
mux {
|
|
pins = "gpio29";
|
|
function = "qdss_tracedata_a";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio29";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu_seta_8 {
|
|
seta_8: seta {
|
|
mux {
|
|
pins = "gpio30";
|
|
function = "qdss_tracedata_a";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio30";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu_seta_9 {
|
|
seta_9: seta {
|
|
mux {
|
|
pins = "gpio31";
|
|
function = "qdss_tracedata_a";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio31";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu_seta_10 {
|
|
seta_10: seta {
|
|
mux {
|
|
pins = "gpio32";
|
|
function = "qdss_tracedata_a";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio32";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu_seta_11 {
|
|
seta_11: seta {
|
|
mux {
|
|
pins = "gpio33";
|
|
function = "qdss_tracedata_a";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio33";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu_seta_12 {
|
|
seta_12: seta {
|
|
mux {
|
|
pins = "gpio34";
|
|
function = "qdss_tracedata_a";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio34";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu_seta_13 {
|
|
seta_13: seta {
|
|
mux {
|
|
pins = "gpio35";
|
|
function = "qdss_tracedata_a";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio35";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu_seta_14 {
|
|
seta_14: seta {
|
|
mux {
|
|
pins = "gpio36";
|
|
function = "qdss_tracedata_a";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio36";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu_seta_15 {
|
|
seta_15: seta {
|
|
mux {
|
|
pins = "gpio37";
|
|
function = "qdss_tracedata_a";
|
|
|
|
};
|
|
|
|
config {
|
|
pins = "gpio37";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu_seta_16 {
|
|
seta_16: seta {
|
|
mux {
|
|
pins = "gpio38";
|
|
function = "qdss_tracedata_a";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio38";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu_seta_17 {
|
|
seta_17: seta {
|
|
mux {
|
|
pins = "gpio39";
|
|
function = "qdss_tracedata_a";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio39";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu_seta_18 {
|
|
seta_18: seta {
|
|
mux {
|
|
pins = "gpio40";
|
|
function = "qdss_tracedata_a";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio40";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu_setb_1 {
|
|
setb_1: setb {
|
|
mux {
|
|
pins = "gpio8";
|
|
function = "qdss_tracedata_b";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio8";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu_setb_2 {
|
|
setb_2: setb {
|
|
mux {
|
|
pins = "gpio9";
|
|
function = "qdss_tracedata_b";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio9";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu_setb_3 {
|
|
setb_3: setb {
|
|
mux {
|
|
pins = "gpio12";
|
|
function = "qdss_tracedata_b";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio12";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu_setb_4 {
|
|
setb_4: setb {
|
|
mux {
|
|
pins = "gpio13";
|
|
function = "qdss_tracedata_b";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio13";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu_setb_5 {
|
|
setb_5: setb {
|
|
mux {
|
|
pins = "gpio20";
|
|
function = "qdss_tracectl_b";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio20";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu_setb_6 {
|
|
setb_6: setb {
|
|
mux {
|
|
pins = "gpio22";
|
|
function = "qdss_traceclk_b";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio22";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu_setb_7 {
|
|
setb_7: setb {
|
|
mux {
|
|
pins = "gpio23";
|
|
function = "qdss_tracedata_b";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio23";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu_setb_8 {
|
|
setb_8: setb {
|
|
mux {
|
|
pins = "gpio42";
|
|
function = "qdss_tracedata_b";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio42";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu_setb_9 {
|
|
setb_9: setb {
|
|
mux {
|
|
pins = "gpio43";
|
|
function = "qdss_tracedata_b";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio43";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu_setb_10 {
|
|
setb_10: setb {
|
|
mux {
|
|
pins = "gpio44";
|
|
function = "qdss_tracedata_b";
|
|
};
|
|
|
|
config {
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu_setb_11 {
|
|
pins = "gpio45";
|
|
function = "qdss_tracedata_b";
|
|
setb_11: setb {
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
tpiu_setb_12 {
|
|
setb_12: setb {
|
|
mux {
|
|
pins = "gpio46";
|
|
function = "qdss_tracedata_b";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio46";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu_setb_13 {
|
|
setb_13: setb {
|
|
mux {
|
|
pins = "gpio47";
|
|
function = "qdss_tracedata_b";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio47";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu_setb_14 {
|
|
setb_14: setb {
|
|
mux {
|
|
pins = "gpio66";
|
|
function = "qdss_tracedata_b";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio66";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu_setb_15 {
|
|
setb_15: setb {
|
|
mux {
|
|
pins = "gpio86";
|
|
function = "qdss_tracedata_b";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio86";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu_setb_16 {
|
|
setb_16: setb {
|
|
mux {
|
|
pins = "gpio87";
|
|
function = "qdss_tracedata_b";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio87";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu_setb_17 {
|
|
setb_17: setb {
|
|
mux {
|
|
pins = "gpio88";
|
|
function = "qdss_tracedata_b";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio88";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu_setb_18 {
|
|
setb_18: setb {
|
|
mux {
|
|
pins = "gpio92";
|
|
function = "qdss_tracedata_b";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio92";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
/* add pingrp for touchscreen */
|
|
pmx_ts_int_active {
|
|
ts_int_active: ts_int_active {
|
|
mux {
|
|
pins = "gpio65";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio65";
|
|
drive-strength = <8>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
};
|
|
|
|
pmx_ts_int_suspend {
|
|
ts_int_suspend: ts_int_suspend {
|
|
mux {
|
|
pins = "gpio65";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio65";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
};
|
|
|
|
pmx_ts_reset_active {
|
|
ts_reset_active: ts_reset_active {
|
|
mux {
|
|
pins = "gpio64";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio64";
|
|
drive-strength = <8>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
};
|
|
|
|
pmx_ts_reset_suspend {
|
|
ts_reset_suspend: ts_reset_suspend {
|
|
mux {
|
|
pins = "gpio64";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio64";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
};
|
|
|
|
pmx_ts_release {
|
|
ts_release: ts_release {
|
|
mux {
|
|
pins = "gpio65", "gpio64";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio65", "gpio64";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
};
|
|
|
|
flash_led_enable {
|
|
flash_led_enable: flash_led_enable {
|
|
mux {
|
|
pins = "gpio128";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio128";
|
|
drive-strength = <16>;
|
|
output-high;
|
|
};
|
|
};
|
|
};
|
|
|
|
flash_led_disable {
|
|
flash_led_disable: flash_led_disable {
|
|
mux {
|
|
pins = "gpio128";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio128";
|
|
drive-strength = <2>;
|
|
output-low;
|
|
};
|
|
};
|
|
};
|
|
|
|
pmx_i2c_8 {
|
|
/* active state */
|
|
i2c_8_active: i2c_8_active{
|
|
mux {
|
|
/* CLK, DATA */
|
|
pins = "gpio98", "gpio99";
|
|
function = "blsp_i2c8";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio98", "gpio99";
|
|
drive-strength = <2>; /* 2 MA */
|
|
bias-disable; /* No PULL */
|
|
};
|
|
};
|
|
|
|
/* suspended state */
|
|
i2c_8_sleep: i2c_8_sleep {
|
|
mux {
|
|
/* CLK, DATA */
|
|
pins = "gpio98", "gpio99";
|
|
function = "blsp_i2c8";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio98", "gpio99";
|
|
drive-strength = <2>; /* 2 MA */
|
|
bias-disable; /* No PULL */
|
|
};
|
|
};
|
|
};
|
|
|
|
pmx_i2c_3 {
|
|
i2c_3_active: i2c_3_active {
|
|
mux {
|
|
/* CLK, DATA */
|
|
pins = "gpio10", "gpio11";
|
|
function = "blsp_i2c3";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio10", "gpio11";
|
|
drive-strength = <2>; /* 2 MA */
|
|
bias-disable; /* No PULL */
|
|
};
|
|
};
|
|
|
|
i2c_3_sleep: i2c_3_sleep {
|
|
mux {
|
|
/* CLK, DATA */
|
|
pins = "gpio10", "gpio11";
|
|
function = "blsp_i2c3";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio10", "gpio11";
|
|
drive-strength = <2>; /* 2 MA */
|
|
bias-disable; /* No PULL */
|
|
};
|
|
};
|
|
};
|
|
|
|
wcnss_pmux_5wire {
|
|
/* Active configuration of bus pins */
|
|
wcnss_default: wcnss_default {
|
|
wcss_wlan2 {
|
|
pins = "gpio76";
|
|
function = "wcss_wlan2";
|
|
};
|
|
wcss_wlan1 {
|
|
pins = "gpio77";
|
|
function = "wcss_wlan1";
|
|
};
|
|
wcss_wlan0 {
|
|
pins = "gpio78";
|
|
function = "wcss_wlan0";
|
|
};
|
|
wcss_wlan {
|
|
pins = "gpio79", "gpio80";
|
|
function = "wcss_wlan";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio76", "gpio77",
|
|
"gpio78", "gpio79",
|
|
"gpio80";
|
|
drive-strength = <6>; /* 6 MA */
|
|
bias-pull-up; /* PULL UP */
|
|
};
|
|
};
|
|
|
|
wcnss_sleep: wcnss_sleep {
|
|
wcss_wlan2 {
|
|
pins = "gpio76";
|
|
function = "wcss_wlan2";
|
|
};
|
|
wcss_wlan1 {
|
|
pins = "gpio77";
|
|
function = "wcss_wlan1";
|
|
};
|
|
wcss_wlan0 {
|
|
pins = "gpio78";
|
|
function = "wcss_wlan0";
|
|
};
|
|
wcss_wlan {
|
|
pins = "gpio79", "gpio80";
|
|
function = "wcss_wlan";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio76", "gpio77",
|
|
"gpio78", "gpio79",
|
|
"gpio80";
|
|
drive-strength = <2>; /* 2 MA */
|
|
bias-pull-down; /* PULL Down */
|
|
};
|
|
};
|
|
};
|
|
|
|
wcnss_pmux_gpio: wcnss_pmux_gpio {
|
|
wcnss_gpio_default: wcnss_gpio_default {
|
|
/* Active configuration of bus pins */
|
|
mux {
|
|
/* Uses general purpose pins */
|
|
pins = "gpio76", "gpio77",
|
|
"gpio78", "gpio79",
|
|
"gpio80";
|
|
function = "gpio";
|
|
|
|
};
|
|
|
|
config {
|
|
pins = "gpio76", "gpio77",
|
|
"gpio78", "gpio79",
|
|
"gpio80";
|
|
drive-strength = <6>; /* 6 MA */
|
|
bias-pull-up; /* PULL UP */
|
|
};
|
|
};
|
|
};
|
|
|
|
tlmm_gpio_key {
|
|
gpio_key_active: gpio_key_active {
|
|
mux {
|
|
pins = "gpio85", "gpio86", "gpio87";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio85", "gpio86", "gpio87";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
gpio_key_suspend: gpio_key_suspend {
|
|
mux {
|
|
pins = "gpio85", "gpio86", "gpio87";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio85", "gpio86", "gpio87";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|