M7350/kernel/arch/arm/boot/dts/qcom/msm8952-mtp.dtsi
2024-09-09 08:57:42 +00:00

469 lines
13 KiB
Plaintext

/*
* Copyright (c) 2015, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include "msm8952.dtsi"
#include "msm8952-pinctrl.dtsi"
#include "msm8952-camera-sensor-mtp.dtsi"
&i2c_3 { /* BLSP1 QUP3 */
synaptics@20 {
compatible = "synaptics,dsx";
reg = <0x20>;
interrupt-parent = <&msm_gpio>;
interrupts = <65 0x2008>;
avdd-supply = <&pm8950_l17>;
vdd-supply = <&pm8950_l6>;
clock-names = "iface_clk", "core_clk";
clocks = <&clock_gcc clk_gcc_blsp1_ahb_clk>,
<&clock_gcc clk_gcc_blsp1_qup3_i2c_apps_clk>;
/* pins used by touchscreen */
pinctrl-names = "pmx_ts_active","pmx_ts_suspend","pmx_ts_release";
pinctrl-0 = <&ts_int_active &ts_reset_active>;
pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
pinctrl-2 = <&ts_release>;
synaptics,irq-gpio = <&msm_gpio 65 0x2008>;
synaptics,reset-gpio = <&msm_gpio 64 0x0>;
synaptics,i2c-pull-up;
synaptics,power-down;
synaptics,disable-gpios;
synaptics,bypass-packrat-id-check;
synaptics,display-coords = <0 0 1079 1919>;
synaptics,panel-coords = <0 0 1079 2084>;
};
};
&i2c_2 {
/* Parallel-charger configuration */
smb1351-charger@1d {
compatible = "qcom,smb1351-charger";
reg = <0x1d>;
qcom,parallel-en-pin-polarity = <1>;
qcom,parallel-charger;
qcom,float-voltage-mv = <4250>;
qcom,recharge-mv = <100>;
};
};
&soc {
gen-vkeys {
compatible = "qcom,gen-vkeys";
label = "synaptics_dsx";
qcom,disp-maxx = <1079>;
qcom,disp-maxy = <1919>;
qcom,panel-maxx = <1079>;
qcom,panel-maxy = <2084>;
qcom,key-codes = <158 139 172 217>;
};
gpio_keys {
compatible = "gpio-keys";
input-name = "gpio-keys";
pinctrl-names = "tlmm_gpio_key_active","tlmm_gpio_key_suspend";
pinctrl-0 = <&gpio_key_active>;
pinctrl-1 = <&gpio_key_suspend>;
camera_focus {
label = "camera_focus";
gpios = <&msm_gpio 87 0x1>;
linux,input-type = <1>;
linux,code = <0x210>;
debounce-interval = <15>;
};
camera_snapshot {
label = "camera_snapshot";
gpios = <&msm_gpio 86 0x1>;
linux,input-type = <1>;
linux,code = <0x2fe>;
debounce-interval = <15>;
};
vol_up {
label = "volume_up";
gpios = <&msm_gpio 85 0x1>;
linux,input-type = <1>;
linux,code = <115>;
debounce-interval = <15>;
};
};
sound {
compatible = "qcom,msm8952-audio-codec";
qcom,model = "msm8952-snd-card-mtp";
reg = <0xc051000 0x4>,
<0xc051004 0x4>,
<0xc055000 0x4>,
<0xc052000 0x4>;
reg-names = "csr_gp_io_mux_mic_ctl",
"csr_gp_io_mux_spkr_ctl",
"csr_gp_io_lpaif_pri_pcm_pri_mode_muxsel",
"csr_gp_io_mux_quin_ctl";
qcom,msm-ext-pa = "primary";
qcom,msm-mclk-freq = <9600000>;
qcom,msm-mbhc-hphl-swh = <0>;
qcom,msm-mbhc-gnd-swh = <0>;
qcom,msm-hs-micbias-type = "external";
qcom,msm-micbias1-ext-cap;
qcom,audio-routing =
"RX_BIAS", "MCLK",
"SPK_RX_BIAS", "MCLK",
"INT_LDO_H", "MCLK",
"MIC BIAS External", "Handset Mic",
"MIC BIAS External2", "Headset Mic",
"MIC BIAS External", "Secondary Mic",
"AMIC1", "MIC BIAS External",
"AMIC2", "MIC BIAS External2",
"AMIC3", "MIC BIAS External",
"WSA_SPK OUT", "VDD_WSA_SWITCH",
"SpkrMono WSA_IN", "WSA_SPK OUT";
qcom,msm-gpios =
"pri_i2s",
"us_eu_gpio";
qcom,pinctrl-names =
"all_off",
"pri_i2s_act",
"us_eu_gpio_act",
"pri_i2s_us_eu_gpio_act";
pinctrl-names =
"all_off",
"pri_i2s_act",
"us_eu_gpio_act",
"pri_i2s_us_eu_gpio_act";
pinctrl-0 = <&cdc_pdm_lines_sus &cdc_pdm_lines_2_sus &cross_conn_det_sus>;
pinctrl-1 = <&cdc_pdm_lines_act &cdc_pdm_lines_2_act &cross_conn_det_sus>;
pinctrl-2 = <&cdc_pdm_lines_sus &cdc_pdm_lines_2_sus &cross_conn_det_act>;
pinctrl-3 = <&cdc_pdm_lines_act &cdc_pdm_lines_2_act &cross_conn_det_act>;
qcom,cdc-us-euro-gpios = <&msm_gpio 63 0>;
asoc-platform = <&pcm0>, <&pcm1>, <&pcm2>, <&voip>, <&voice>,
<&loopback>, <&compress>, <&hostless>,
<&afe>, <&lsm>, <&routing>, <&lpa>,
<&voice_svc>;
asoc-platform-names = "msm-pcm-dsp.0", "msm-pcm-dsp.1", "msm-pcm-dsp.2",
"msm-voip-dsp", "msm-pcm-voice", "msm-pcm-loopback",
"msm-compress-dsp", "msm-pcm-hostless", "msm-pcm-afe",
"msm-lsm-client", "msm-pcm-routing", "msm-pcm-lpa",
"msm-voice-svc";
asoc-cpu = <&dai_pri_auxpcm>, <&dai_hdmi>,
<&dai_mi2s0>, <&dai_mi2s1>, <&dai_mi2s2>, <&dai_mi2s3>,
<&dai_mi2s5>, <&dai_mi2s6>,
<&sb_0_rx>, <&sb_0_tx>, <&sb_1_rx>, <&sb_1_tx>,
<&sb_3_rx>, <&sb_3_tx>, <&sb_4_rx>, <&sb_4_tx>,
<&bt_sco_rx>, <&bt_sco_tx>, <&int_fm_rx>, <&int_fm_tx>,
<&afe_pcm_rx>, <&afe_pcm_tx>, <&afe_proxy_rx>, <&afe_proxy_tx>,
<&incall_record_rx>, <&incall_record_tx>, <&incall_music_rx>,
<&incall_music_2_rx>;
asoc-cpu-names = "msm-dai-q6-auxpcm.1", "msm-dai-q6-hdmi.8",
"msm-dai-q6-mi2s.0", "msm-dai-q6-mi2s.1",
"msm-dai-q6-mi2s.2", "msm-dai-q6-mi2s.3",
"msm-dai-q6-mi2s.5", "msm-dai-q6-mi2s.6",
"msm-dai-q6-dev.16384", "msm-dai-q6-dev.16385",
"msm-dai-q6-dev.16386", "msm-dai-q6-dev.16387",
"msm-dai-q6-dev.16390", "msm-dai-q6-dev.16391",
"msm-dai-q6-dev.16392", "msm-dai-q6-dev.16393",
"msm-dai-q6-dev.12288", "msm-dai-q6-dev.12289",
"msm-dai-q6-dev.12292", "msm-dai-q6-dev.12293",
"msm-dai-q6-dev.224", "msm-dai-q6-dev.225",
"msm-dai-q6-dev.241", "msm-dai-q6-dev.240",
"msm-dai-q6-dev.32771", "msm-dai-q6-dev.32772",
"msm-dai-q6-dev.32773", "msm-dai-q6-dev.32770";
asoc-codec = <&stub_codec>, <&pm8950_cajon_dig>;
asoc-codec-names = "msm-stub-codec.1", "cajon_codec";
asoc-wsa-codec-names = "wsa881x-i2c-codec.8-000f";
asoc-wsa-codec-prefixes = "SpkrMono";
msm-vdd-wsa-switch-supply = <&pm8950_l13>;
qcom,msm-vdd-wsa-switch-voltage = <3075000>;
qcom,msm-vdd-wsa-switch-current = <5000>;
};
i2c@7af8000 {
wsa881x-i2c-codec@e {
compatible = "qcom,wsa881x-i2c-codec";
reg = <0x0e>;
qcom,msm-gpios = "wsa_clk",
"wsa_reset",
"wsa_vi";
qcom,pinctrl-names = "all_off",
"wsa_clk",
"wsa_active",
"wsa_clk_active",
"wsa_vi",
"wsa_clk_vi",
"wsa_active_vi",
"wsa_all";
pinctrl-names = "all_off",
"wsa_clk",
"wsa_active",
"wsa_clk_active",
"wsa_vi",
"wsa_clk_vi",
"wsa_active_vi",
"wsa_all";
pinctrl-0 = <&wsa_clk_off &wsa_reset_off &wsa_vi_off>;
pinctrl-1 = <&wsa_clk_on &wsa_reset_off &wsa_vi_off>;
pinctrl-2 = <&wsa_clk_off &wsa_reset_on &wsa_vi_off>;
pinctrl-3 = <&wsa_clk_on &wsa_reset_on &wsa_vi_off>;
pinctrl-4 = <&wsa_clk_off &wsa_reset_off &wsa_vi_on>;
pinctrl-5 = <&wsa_clk_on &wsa_reset_off &wsa_vi_on>;
pinctrl-6 = <&wsa_clk_off &wsa_reset_on &wsa_vi_on>;
pinctrl-7 = <&wsa_clk_on &wsa_reset_on &wsa_vi_on>;
};
wsa881x-i2c-codec@44 {
compatible = "qcom,wsa881x-i2c-codec";
reg = <0x44>;
};
wsa881x-i2c-codec@f {
compatible = "qcom,wsa881x-i2c-codec";
reg = <0x0f>;
qcom,msm-gpios = "wsa_clk",
"wsa_reset",
"wsa_vi";
qcom,pinctrl-names = "all_off",
"wsa_clk",
"wsa_active",
"wsa_clk_active",
"wsa_vi",
"wsa_clk_vi",
"wsa_active_vi",
"wsa_all";
pinctrl-names = "all_off",
"wsa_clk",
"wsa_active",
"wsa_clk_active",
"wsa_vi",
"wsa_clk_vi",
"wsa_active_vi",
"wsa_all";
pinctrl-0 = <&wsa_clk_off &wsa_reset_off &wsa_vi_off>;
pinctrl-1 = <&wsa_clk_on &wsa_reset_off &wsa_vi_off>;
pinctrl-2 = <&wsa_clk_off &wsa_reset_on &wsa_vi_off>;
pinctrl-3 = <&wsa_clk_on &wsa_reset_on &wsa_vi_off>;
pinctrl-4 = <&wsa_clk_off &wsa_reset_off &wsa_vi_on>;
pinctrl-5 = <&wsa_clk_on &wsa_reset_off &wsa_vi_on>;
pinctrl-6 = <&wsa_clk_off &wsa_reset_on &wsa_vi_on>;
pinctrl-7 = <&wsa_clk_on &wsa_reset_on &wsa_vi_on>;
};
wsa881x-i2c-codec@45 {
compatible = "qcom,wsa881x-i2c-codec";
reg = <0x45>;
};
};
};
&blsp1_uart2 {
status = "ok";
pinctrl-names = "default";
pinctrl-0 = <&uart_console_sleep>;
};
/{
mtp_batterydata: qcom,battery-data {
qcom,batt-id-range-pct = <15>;
#include "batterydata-itech-3000mah-4200mv.dtsi"
#include "batterydata-itech-3000mah.dtsi"
};
};
&pmi8950_fg {
qcom,battery-data = <&mtp_batterydata>;
};
&pmi8950_charger {
qcom,battery-data = <&mtp_batterydata>;
};
&spmi_bus {
qcom,pm8950@0 {
qcom,leds@a300 {
status = "ok";
qcom,led_mpp_4 {
label = "mpp";
linux,name = "button-backlight";
linux,default-trigger = "none";
qcom,default-state = "off";
qcom,max-current = <40>;
qcom,current-setting = <5>;
qcom,id = <6>;
qcom,mode = "manual";
qcom,source-sel = <1>;
qcom,mode-ctrl = <0x60>;
};
};
};
qcom,pmi8950@3 {
qcom,leds@d800 {
qcom,cons-sync-write-delay-us = <1000>;
qcom,fs-curr-ua = <30000>;
};
qcom,leds@d300 {
compatible = "qcom,qpnp-flash-led";
status = "ok";
reg = <0xd300 0x100>;
pinctrl-names = "flash_led_enable","flash_led_disable";
pinctrl-0 = <&flash_led_enable>;
pinctrl-1 = <&flash_led_disable>;
qcom,follow-otst2-rb-disabled;
};
};
};
&sdhc_1 {
vdd-supply = <&pm8950_l8>;
qcom,vdd-voltage-level = <2900000 2900000>;
qcom,vdd-current-level = <200 570000>;
vdd-io-supply = <&pm8950_l5>;
qcom,vdd-io-always-on;
qcom,vdd-io-lpm-sup;
qcom,vdd-io-voltage-level = <1800000 1800000>;
qcom,vdd-io-current-level = <200 325000>;
pinctrl-names = "active", "sleep";
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;
qcom,nonremovable;
status = "ok";
};
&sdhc_2 {
vdd-supply = <&pm8950_l11>;
qcom,vdd-voltage-level = <2950000 2950000>;
qcom,vdd-current-level = <15000 400000>;
vdd-io-supply = <&pm8950_l12>;
qcom,vdd-io-voltage-level = <1800000 2950000>;
qcom,vdd-io-current-level = <200 22000>;
pinctrl-names = "active", "sleep";
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
#address-cells = <0>;
interrupt-parent = <&sdhc_2>;
interrupts = <0 1 2>;
#interrupt-cells = <1>;
interrupt-map-mask = <0xffffffff>;
interrupt-map = <0 &intc 0 125 0
1 &intc 0 221 0
2 &msm_gpio 67 0>;
interrupt-names = "hc_irq", "pwr_irq", "status_irq";
cd-gpios = <&msm_gpio 67 0x1>;
status = "ok";
};
&mdss_mdp {
qcom,mdss-pref-prim-intf = "dsi";
};
&dsi_truly_1080_vid {
qcom,mdss-dsi-pan-enable-dynamic-fps;
qcom,mdss-dsi-pan-fps-update = "dfps_immediate_porch_mode_vfp";
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
};
&msm_gpio {
pmx_mdss {
mdss_dsi_active: mdss_dsi_active {
mux {
pins = "gpio90", "gpio0", "gpio91";
};
config {
pins = "gpio90", "gpio0", "gpio91";
};
};
mdss_dsi_suspend: mdss_dsi_suspend {
mux {
pins = "gpio90", "gpio0", "gpio91";
};
config {
pins = "gpio90", "gpio0", "gpio91";
};
};
};
pmx_mdss_te {
mdss_te_active: mdss_te_active {
mux {
pins = "gpio24";
};
config {
pins = "gpio24";
};
};
mdss_te_suspend: mdss_te_suspend {
mux {
pins = "gpio24";
};
config {
pins = "gpio24";
};
};
};
};
&mdss_dsi0 {
pinctrl-names = "mdss_default", "mdss_sleep";
pinctrl-0 = <&mdss_dsi_active &mdss_te_active>;
pinctrl-1 = <&mdss_dsi_suspend &mdss_te_suspend>;
qcom,dsi-pref-prim-pan = <&dsi_truly_1080_vid>;
qcom,platform-enable-gpio = <&msm_gpio 90 0>;
qcom,platform-reset-gpio = <&msm_gpio 0 0>;
qcom,platform-bklight-en-gpio = <&msm_gpio 91 0>;
};
&dsi_truly_1080_cmd {
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
};
&labibb {
status = "ok";
qpnp,qpnp-labibb-mode = "lcd";
};
/* CoreSight */
&tpiu {
pinctrl-names = "sdcard", "trace", "swduart",
"swdtrc", "jtag", "spmi";
/* NIDnT */
pinctrl-0 = <&qdsd_clk_sdcard &qdsd_cmd_sdcard
&qdsd_data0_sdcard &qdsd_data1_sdcard
&qdsd_data2_sdcard &qdsd_data3_sdcard>;
pinctrl-1 = <&qdsd_clk_trace &qdsd_cmd_trace
&qdsd_data0_trace &qdsd_data1_trace
&qdsd_data2_trace &qdsd_data3_trace>;
pinctrl-2 = <&qdsd_cmd_swduart &qdsd_data0_swduart
&qdsd_data1_swduart &qdsd_data2_swduart
&qdsd_data3_swduart>;
pinctrl-3 = <&qdsd_clk_swdtrc &qdsd_cmd_swdtrc
&qdsd_data0_swdtrc &qdsd_data1_swdtrc
&qdsd_data2_swdtrc &qdsd_data3_swdtrc>;
pinctrl-4 = <&qdsd_cmd_jtag &qdsd_data0_jtag
&qdsd_data1_jtag &qdsd_data2_jtag
&qdsd_data3_jtag>;
pinctrl-5 = <&qdsd_clk_spmi &qdsd_cmd_spmi
&qdsd_data0_spmi &qdsd_data3_spmi>;
};