1657 lines
44 KiB
Plaintext
1657 lines
44 KiB
Plaintext
/*
|
|
* Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 and
|
|
* only version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include "skeleton.dtsi"
|
|
#include <dt-bindings/clock/mdm-clocks-9607.h>
|
|
#include <dt-bindings/clock/msm-clocks-a7.h>
|
|
#include <dt-bindings/regulator/qcom,rpm-smd-regulator.h>
|
|
|
|
/ {
|
|
model = "Qualcomm Technologies, Inc. MDM 9607";
|
|
compatible = "qcom,mdm9607";
|
|
qcom,msm-id = <290 0x10000>, <296 0x10000>, <297 0x10000>,
|
|
<298 0x10000>, <299 0x10000>;
|
|
interrupt-parent = <&intc>;
|
|
|
|
aliases {
|
|
sdhc1 = &sdhc_1;/* SDC1 for SDIO slot */
|
|
qpic_nand1 = &qnand_1;
|
|
};
|
|
|
|
reserved-memory {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
modem_adsp_mem: modem_adsp_region@0 {
|
|
compatible = "removed-dma-pool";
|
|
no-map-fixup;
|
|
reg = <0x82a00000 0x5000000>;
|
|
};
|
|
|
|
cnss_debug_mem: cnss_debug_region@0 {
|
|
compatible = "removed-dma-pool";
|
|
no-map;
|
|
reg = <0x87a00000 0x200000>;
|
|
};
|
|
|
|
external_image_mem: external_image_region@0 {
|
|
compatible = "removed-dma-pool";
|
|
no-map;
|
|
reg = <0x87c00000 0x400000>;
|
|
};
|
|
|
|
audio_mem: audio_region@0 {
|
|
compatible = "shared-dma-pool";
|
|
reusable;
|
|
alignment = <0x400000>;
|
|
size = <0x400000>;
|
|
};
|
|
};
|
|
|
|
aliases {
|
|
/* smdtty devices */
|
|
smd7 = &smdtty_data1;
|
|
smd8 = &smdtty_data4;
|
|
smd11 = &smdtty_data11;
|
|
smd21 = &smdtty_data21;
|
|
smd36 = &smdtty_loopback;
|
|
/* spi device */
|
|
spi1 = &spi_1;
|
|
i2c4 = &i2c_4;
|
|
sdhc2 = &sdhc_2; /* SDC2 SD card slot */
|
|
};
|
|
|
|
cpus {
|
|
#size-cells = <0>;
|
|
#address-cells = <1>;
|
|
|
|
CPU0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
reg = <0x0>;
|
|
qcom,limits-info = <&mitigation_profile0>;
|
|
};
|
|
};
|
|
soc: soc { };
|
|
};
|
|
|
|
#include "mdm9607-ion.dtsi"
|
|
#include "mdm9607-smp2p.dtsi"
|
|
#include "mdm9607-bus.dtsi"
|
|
#include "mdm9607-coresight.dtsi"
|
|
#include "mdm9607-pm.dtsi"
|
|
|
|
&soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
intc: interrupt-controller@b000000 {
|
|
compatible = "qcom,msm-qgic2";
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
reg = <0x0b000000 0x1000>,
|
|
<0x0b002000 0x1000>;
|
|
};
|
|
|
|
qcom,mpm2-sleep-counter@4a3000 {
|
|
compatible = "qcom,mpm2-sleep-counter";
|
|
reg = <0x4a3000 0x1000>;
|
|
clock-frequency = <32768>;
|
|
};
|
|
|
|
timer@b020000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
compatible = "arm,armv7-timer-mem";
|
|
reg = <0xb020000 0x1000>;
|
|
clock-frequency = <19200000>;
|
|
|
|
frame@b021000 {
|
|
frame-number = <0>;
|
|
interrupts = <0 7 0x4>,
|
|
<0 6 0x4>;
|
|
reg = <0xb021000 0x1000>,
|
|
<0xb022000 0x1000>;
|
|
};
|
|
|
|
frame@b023000 {
|
|
frame-number = <1>;
|
|
interrupts = <0 8 0x4>;
|
|
reg = <0xb023000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@b024000 {
|
|
frame-number = <2>;
|
|
interrupts = <0 9 0x4>;
|
|
reg = <0xb024000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@b025000 {
|
|
frame-number = <3>;
|
|
interrupts = <0 10 0x4>;
|
|
reg = <0xb025000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@b026000 {
|
|
frame-number = <4>;
|
|
interrupts = <0 11 0x4>;
|
|
reg = <0xb026000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@b027000 {
|
|
frame-number = <5>;
|
|
interrupts = <0 12 0x4>;
|
|
reg = <0xb027000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@b028000 {
|
|
frame-number = <6>;
|
|
interrupts = <0 13 0x4>;
|
|
reg = <0xb028000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@b029000 {
|
|
frame-number = <7>;
|
|
interrupts = <0 14 0x4>;
|
|
reg = <0xb029000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
qcom,wdt@b017000 {
|
|
compatible = "qcom,msm-watchdog";
|
|
reg = <0xb017000 0x1000>;
|
|
reg-names = "wdt-base";
|
|
interrupts = <0 3 0>, <0 4 0>;
|
|
qcom,bark-time = <11000>;
|
|
qcom,pet-time = <10000>;
|
|
qcom,wakeup-enable;
|
|
};
|
|
|
|
qcom,msm-rtb {
|
|
compatible = "qcom,msm-rtb";
|
|
qcom,rtb-size = <0x10000>; /* 64K EBI1 buffer */
|
|
};
|
|
|
|
qcom,msm-imem@8600000 {
|
|
compatible = "qcom,msm-imem";
|
|
reg = <0x08600000 0x1000>; /* Address and size of IMEM */
|
|
ranges = <0x0 0x08600000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
mem_dump_table@10 {
|
|
compatible = "qcom,msm-imem-mem_dump_table";
|
|
reg = <0x10 8>;
|
|
};
|
|
|
|
restart_reason@65c {
|
|
compatible = "qcom,msm-imem-restart_reason";
|
|
reg = <0x65c 4>;
|
|
};
|
|
|
|
boot_stats@6b0 {
|
|
compatible = "qcom,msm-imem-boot_stats";
|
|
reg = <0x6b0 32>;
|
|
};
|
|
|
|
pil@94c {
|
|
compatible = "qcom,msm-imem-pil";
|
|
reg = <0x94c 200>;
|
|
};
|
|
};
|
|
|
|
restart@4ab000 {
|
|
compatible = "qcom,pshold";
|
|
reg = <0x4ab000 0x4>,
|
|
<0x193d100 0x4>;
|
|
reg-names = "pshold-base", "tcsr-boot-misc-detect";
|
|
};
|
|
|
|
jtag_fuse: jtagfuse@a601c {
|
|
compatible = "qcom,jtag-fuse-v2";
|
|
reg = <0xa601c 0x8>;
|
|
reg-names = "fuse-base";
|
|
};
|
|
|
|
jtag_mm: jtagmm@6042000 {
|
|
compatible = "qcom,jtagv8-mm";
|
|
reg = <0x6042000 0x1000>,
|
|
<0x6040000 0x1000>;
|
|
reg-names = "etm-base", "debug-base";
|
|
|
|
clocks = <&clock_gcc clk_qdss_clk>,
|
|
<&clock_gcc clk_qdss_a_clk>;
|
|
clock-names = "core_clk", "core_a_clk";
|
|
|
|
qcom,coresight-jtagmm-cpu = <&CPU0>;
|
|
};
|
|
|
|
clock_gcc: qcom,gcc@1800000 {
|
|
compatible = "qcom,gcc-mdm9607";
|
|
reg = <0x1800000 0x80000>,
|
|
<0x0b008000 0x00050>;
|
|
reg-names = "cc_base", "apcs_base";
|
|
vdd_dig-supply = <&mdm9607_s3_level>;
|
|
vdd_stromer_dig-supply = <&mdm9607_s3_level_ao>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
clock_debug: qcom,debug@1874000 {
|
|
compatible = "qcom,cc-debug-mdm9607";
|
|
reg = <0x1800000 0x80000>,
|
|
<0xb01101c 0x8>;
|
|
reg-names = "cc_base", "meas";
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
clock_cpu: qcom,clock-a7@0b010008 {
|
|
compatible = "qcom,clock-a7-mdm9607";
|
|
reg = <0x0b010008 0x8>,
|
|
<0x000a412c 0x8>;
|
|
reg-names = "rcg-base", "efuse";
|
|
qcom,safe-freq = < 400000000 >;
|
|
cpu-vdd-supply = <&apc_vreg_corner>;
|
|
clocks = <&clock_gcc clk_gpll0_ao_clk_src>,
|
|
<&clock_gcc clk_a7sspll>;
|
|
clock-names = "clk-1", "clk-5";
|
|
qcom,speed4-bin-v0 =
|
|
< 0 0>,
|
|
< 400000000 1>,
|
|
< 800000000 2>,
|
|
< 998400000 3>,
|
|
< 1094400000 4>,
|
|
< 1190400000 5>,
|
|
< 1248000000 6>,
|
|
< 1305600000 7>;
|
|
qcom,a7ssmux-opp-store-vcorner = <&CPU0>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
cpubw: qcom,cpubw {
|
|
compatible = "qcom,devbw";
|
|
governor = "cpufreq";
|
|
qcom,src-dst-ports = <1 512>;
|
|
qcom,active-only;
|
|
qcom,bw-tbl =
|
|
< 366 /* 48 MHz */>,
|
|
< 732 /* 96 MHz */>,
|
|
< 915 /* 120 MHz */>,
|
|
< 1145 /* 150.15 MHz */>,
|
|
< 1831 /* 240 MHz */>,
|
|
< 2291 /* 300.3 MHZ */>;
|
|
};
|
|
|
|
devfreq-cpufreq {
|
|
cpubw-cpufreq {
|
|
target-dev = <&cpubw>;
|
|
cpu-to-dev-map =
|
|
< 400000 732>,
|
|
< 800000 915>,
|
|
< 998400 1145>,
|
|
< 1094400 1831>,
|
|
< 1305600 2291>;
|
|
};
|
|
};
|
|
|
|
qcom,cpu-bwmon {
|
|
compatible = "qcom,bimc-bwmon2";
|
|
reg = <0x408000 0x300>, <0x401000 0x200>;
|
|
reg-names = "base", "global_base";
|
|
interrupts = <0 183 4>;
|
|
qcom,mport = <0>;
|
|
qcom,target-dev = <&cpubw>;
|
|
};
|
|
|
|
qcom,msm-cpufreq {
|
|
reg = <0 4>;
|
|
compatible = "qcom,msm-cpufreq";
|
|
clocks = <&clock_cpu clk_a7ssmux>;
|
|
clock-names = "cpu0_clk";
|
|
qcom,cpufreq-table =
|
|
< 400000 >,
|
|
< 800000 >,
|
|
< 998400 >,
|
|
< 1094400 >,
|
|
< 1190400 >,
|
|
< 1248000 >,
|
|
< 1305600 >;
|
|
};
|
|
|
|
qcom,sps {
|
|
compatible = "qcom,msm_sps_4k";
|
|
qcom,pipe-attr-ee;
|
|
};
|
|
|
|
blsp1_uart5: serial@78b3000 { /* BLSP1 UART5 */
|
|
compatible = "qcom,msm-lsuart-v14";
|
|
reg = <0x78b3000 0x200>;
|
|
interrupts = <0 121 0>;
|
|
clocks = <&clock_gcc clk_gcc_blsp1_uart5_apps_clk>,
|
|
<&clock_gcc clk_gcc_blsp1_ahb_clk>;
|
|
clock-names = "core_clk", "iface_clk";
|
|
status = "disabled";
|
|
};
|
|
|
|
dma_blsp1: qcom,sps-dma@7884000 { /* BLSP1 */
|
|
#dma-cells = <4>;
|
|
compatible = "qcom,sps-dma";
|
|
reg = <0x7884000 0x2b000>;
|
|
interrupts = <0 238 0>;
|
|
qcom,summing-threshold = <10>;
|
|
};
|
|
|
|
i2c_4: i2c@78b8000 { /* BLSP1 QUP4 */
|
|
compatible = "qcom,i2c-msm-v2";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg-names = "qup_phys_addr";
|
|
reg = <0x78b8000 0x600>;
|
|
interrupt-names = "qup_irq";
|
|
interrupts = <0 98 0>;
|
|
qcom,clk-freq-out = <400000>;
|
|
qcom,clk-freq-in = <19200000>;
|
|
clock-names = "iface_clk", "core_clk";
|
|
clocks = <&clock_gcc clk_gcc_blsp1_ahb_clk>,
|
|
<&clock_gcc clk_gcc_blsp1_qup4_i2c_apps_clk>;
|
|
|
|
pinctrl-names = "i2c_active", "i2c_sleep";
|
|
pinctrl-0 = <&i2c_4_active>;
|
|
pinctrl-1 = <&i2c_4_sleep>;
|
|
qcom,noise-rjct-scl = <0>;
|
|
qcom,noise-rjct-sda = <0>;
|
|
qcom,master-id = <86>;
|
|
dmas = <&dma_blsp1 18 64 0x20000020 0x20>,
|
|
<&dma_blsp1 19 32 0x20000020 0x20>;
|
|
dma-names = "tx", "rx";
|
|
status = "disabled";
|
|
|
|
wcd9xxx_tomtom_codec@0d{
|
|
compatible = "qcom,wcd9xxx-i2c";
|
|
reg = <0x0d>;
|
|
|
|
qcom,cdc-reset-gpio = <&tlmm_pinmux 26 0>;
|
|
pinctrl-names = "default", "idle";
|
|
pinctrl-0 = <&codec_reset_active>;
|
|
pinctrl-1 = <&codec_reset_sleep>;
|
|
|
|
qcom,cdc-micbias1-ext-cap;
|
|
|
|
interrupt-parent = <&wcd9xxx_intc>;
|
|
interrupts = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
|
|
16 17 18 19 20 21 22 23 24 25 26 27 28>;
|
|
cdc-vdd-buck-supply = <&mdm9607_s4>;
|
|
qcom,cdc-vdd-buck-voltage = <1950000 1950000>;
|
|
qcom,cdc-vdd-buck-current = <25000>;
|
|
|
|
cdc-vdd-tx-h-supply = <&mdm9607_l11>;
|
|
qcom,cdc-vdd-tx-h-voltage = <1800000 1800000>;
|
|
qcom,cdc-vdd-tx-h-current = <25000>;
|
|
|
|
cdc-vdd-rx-h-supply = <&mdm9607_l11>;
|
|
qcom,cdc-vdd-rx-h-voltage = <1800000 1800000>;
|
|
qcom,cdc-vdd-rx-h-current = <25000>;
|
|
|
|
cdc-vddpx-1-supply = <&mdm9607_l11>;
|
|
qcom,cdc-vddpx-1-voltage = <1800000 1800000>;
|
|
qcom,cdc-vddpx-1-current = <10000>;
|
|
|
|
cdc-vdd-a-1p2v-supply = <&mdm9607_l9>;
|
|
qcom,cdc-vdd-a-1p2v-voltage = <1225000 1225000>;
|
|
qcom,cdc-vdd-a-1p2v-current = <10000>;
|
|
|
|
cdc-vddcx-1-supply = <&mdm9607_l9>;
|
|
qcom,cdc-vddcx-1-voltage = <1225000 1225000>;
|
|
qcom,cdc-vddcx-1-current = <10000>;
|
|
|
|
cdc-vddcx-2-supply = <&mdm9607_l9>;
|
|
qcom,cdc-vddcx-2-voltage = <1225000 1225000>;
|
|
qcom,cdc-vddcx-2-current = <10000>;
|
|
|
|
qcom,cdc-static-supplies = "cdc-vdd-buck",
|
|
"cdc-vdd-tx-h",
|
|
"cdc-vdd-rx-h",
|
|
"cdc-vddpx-1",
|
|
"cdc-vdd-a-1p2v",
|
|
"cdc-vddcx-1",
|
|
"cdc-vddcx-2";
|
|
|
|
qcom,cdc-micbias-ldoh-v = <0x3>;
|
|
qcom,cdc-micbias-cfilt1-mv = <1800>;
|
|
qcom,cdc-micbias-cfilt2-mv = <2700>;
|
|
qcom,cdc-micbias-cfilt3-mv = <1800>;
|
|
qcom,cdc-micbias1-cfilt-sel = <0x0>;
|
|
qcom,cdc-micbias2-cfilt-sel = <0x1>;
|
|
qcom,cdc-micbias3-cfilt-sel = <0x2>;
|
|
qcom,cdc-micbias4-cfilt-sel = <0x2>;
|
|
qcom,cdc-mclk-clk-rate = <12288000>;
|
|
qcom,cdc-dmic-sample-rate = <4800000>;
|
|
qcom,cdc-variant = "WCD9330";
|
|
};
|
|
|
|
wcd9xxx_tapan_codec@0d{
|
|
compatible = "qcom,wcd9xxx-i2c";
|
|
reg = <0x0d>;
|
|
|
|
status = "disabled";
|
|
qcom,cdc-reset-gpio = <&tlmm_pinmux 26 0>;
|
|
pinctrl-names = "default", "idle";
|
|
pinctrl-0 = <&codec_reset_active>;
|
|
pinctrl-1 = <&codec_reset_sleep>;
|
|
|
|
qcom,cdc-micbias1-ext-cap;
|
|
|
|
interrupt-parent = <&wcd9xxx_intc>;
|
|
interrupts = <0 1 2 3 4 5 6>, <7 8 9 10 11 12 13>,
|
|
<14 15 16 17 18 19 20>,
|
|
<21 22 23 24 25 26 27 28>;
|
|
cdc-vdd-buck-supply = <&mdm9607_s4>;
|
|
qcom,cdc-vdd-buck-voltage = <1950000 1950000>;
|
|
qcom,cdc-vdd-buck-current = <25000>;
|
|
|
|
cdc-vdd-tx-h-supply = <&mdm9607_l11>;
|
|
qcom,cdc-vdd-tx-h-voltage = <1800000 1800000>;
|
|
qcom,cdc-vdd-tx-h-current = <25000>;
|
|
|
|
cdc-vdd-rx-h-supply = <&mdm9607_l11>;
|
|
qcom,cdc-vdd-rx-h-voltage = <1800000 1800000>;
|
|
qcom,cdc-vdd-rx-h-current = <25000>;
|
|
|
|
cdc-vddpx-1-supply = <&mdm9607_l11>;
|
|
qcom,cdc-vddpx-1-voltage = <1800000 1800000>;
|
|
qcom,cdc-vddpx-1-current = <10000>;
|
|
|
|
cdc-vdd-cx-supply = <&mdm9607_l9>;
|
|
qcom,cdc-vdd-cx-voltage = <1225000 1225000>;
|
|
qcom,cdc-vdd-cx-current = <10000>;
|
|
|
|
qcom,cdc-static-supplies = "cdc-vdd-buck",
|
|
"cdc-vdd-tx-h",
|
|
"cdc-vdd-rx-h",
|
|
"cdc-vddpx-1",
|
|
"cdc-vdd-cx";
|
|
|
|
qcom,cdc-micbias-ldoh-v = <0x3>;
|
|
qcom,cdc-micbias-cfilt1-mv = <1800>;
|
|
qcom,cdc-micbias-cfilt2-mv = <2700>;
|
|
qcom,cdc-micbias-cfilt3-mv = <1800>;
|
|
qcom,cdc-micbias1-cfilt-sel = <0x0>;
|
|
qcom,cdc-micbias2-cfilt-sel = <0x1>;
|
|
qcom,cdc-micbias3-cfilt-sel = <0x2>;
|
|
qcom,cdc-micbias4-cfilt-sel = <0x2>;
|
|
qcom,cdc-mclk-clk-rate = <12288000>;
|
|
qcom,cdc-dmic-sample-rate = <4800000>;
|
|
qcom,cdc-variant = "WCD9306";
|
|
};
|
|
|
|
wcd9xxx_codec@77{
|
|
compatible = "qcom,wcd9xxx-i2c";
|
|
reg = <0x77>;
|
|
};
|
|
|
|
wcd9xxx_codec@66{
|
|
compatible = "qcom,wcd9xxx-i2c";
|
|
reg = <0x66>;
|
|
};
|
|
|
|
wcd9xxx_codec@55{
|
|
compatible = "qcom,wcd9xxx-i2c";
|
|
reg = <0x55>;
|
|
};
|
|
};
|
|
|
|
blsp1_uart3: uart@78b1000 {
|
|
compatible = "qcom,msm-hsuart-v14";
|
|
reg = <0x78b1000 0x200>,
|
|
<0x7884000 0x2b000>;
|
|
reg-names = "core_mem", "bam_mem";
|
|
interrupt-names = "core_irq", "bam_irq", "wakeup_irq";
|
|
#address-cells = <0>;
|
|
interrupt-parent = <&blsp1_uart3>;
|
|
interrupts = <0 1 2>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0xffffffff>;
|
|
interrupt-map = <0 &intc 0 119 0
|
|
1 &intc 0 238 0
|
|
2 &tlmm_pinmux 1 0>;
|
|
|
|
qcom,inject-rx-on-wakeup;
|
|
qcom,rx-char-to-inject = <0xFD>;
|
|
|
|
qcom,bam-tx-ep-pipe-index = <4>;
|
|
qcom,bam-rx-ep-pipe-index = <5>;
|
|
qcom,master-id = <86>;
|
|
clock-names = "core_clk", "iface_clk";
|
|
clocks = <&clock_gcc clk_gcc_blsp1_uart3_apps_clk>,
|
|
<&clock_gcc clk_gcc_blsp1_ahb_clk>;
|
|
pinctrl-names = "sleep", "default";
|
|
pinctrl-0 = <&blsp1_uart3_sleep>;
|
|
pinctrl-1 = <&blsp1_uart3_active>;
|
|
qcom,msm-bus,name = "blsp1_uart3";
|
|
qcom,msm-bus,num-cases = <2>;
|
|
qcom,msm-bus,num-paths = <1>;
|
|
qcom,msm-bus,vectors-KBps =
|
|
<86 512 0 0>,
|
|
<86 512 500 800>;
|
|
status = "disabled";
|
|
};
|
|
|
|
qcom,cnss-sdio {
|
|
compatible = "qcom,cnss_sdio";
|
|
reg = <0x87a00000 0x200000>;
|
|
reg-names = "ramdump";
|
|
subsys-name = "AR6320";
|
|
vdd-wlan-supply = <&rome_vreg>;
|
|
vdd-wlan-dsrc-supply = <&sdcard_ext_vreg>;
|
|
vdd-wlan-io-supply = <&mdm9607_l11>;
|
|
vdd-wlan-xtal-supply = <&mdm9607_l2>;
|
|
};
|
|
|
|
usb_otg: usb@78d9000 {
|
|
compatible = "qcom,hsusb-otg";
|
|
reg = <0x78d9000 0x400>, <0x6c000 0x200>;
|
|
reg-names = "core", "phy_csr";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
interrupts = <0 134 0>, <0 140 0>;
|
|
interrupt-names = "core_irq", "async_irq";
|
|
|
|
hsusb_vdd_dig-supply = <&mdm9607_l9>;
|
|
HSUSB_1p8-supply = <&mdm9607_l2>;
|
|
HSUSB_3p3-supply = <&mdm9607_l4>;
|
|
qcom,vdd-voltage-level = <0 1225000 1225000>;
|
|
|
|
qcom,hsusb-otg-phy-init-seq =
|
|
<0x44 0x80 0x38 0x81 0x24 0x82 0x13 0x83 0xffffffff>;
|
|
|
|
qcom,hsusb-otg-phy-type = <3>; /* SNPS Femto PHY */
|
|
qcom,hsusb-otg-mode = <3>; /* OTG mode */
|
|
qcom,hsusb-otg-otg-control = <2>; /* PMIC control */
|
|
qcom,usbid-gpio = <&pm8019_mpps 1 0>;
|
|
qcom,hsusb-log2-itc = <4>;
|
|
qcom,dp-manual-pullup;
|
|
qcom,boost-sysclk-with-streaming;
|
|
qcom,phy-dvdd-always-on;
|
|
qcom,hsusb-otg-lpm-on-dev-suspend;
|
|
qcom,axi-prefetch-enable;
|
|
qcom,hsusb-otg-mpm-dpsehv-int = <49>;
|
|
qcom,hsusb-otg-mpm-dmsehv-int = <58>;
|
|
qcom,hsusb-otg-delay-lpm;
|
|
qcom,enable-phy-id-pullup;
|
|
|
|
qcom,msm-bus,name = "usb2";
|
|
qcom,msm-bus,num-cases = <3>;
|
|
qcom,msm-bus,num-paths = <1>;
|
|
qcom,msm-bus,vectors-KBps =
|
|
<87 512 0 0>,
|
|
<87 512 80000 0>,
|
|
<87 512 6000 6000>;
|
|
clocks = <&clock_gcc clk_gcc_usb_hs_ahb_clk>,
|
|
<&clock_gcc clk_gcc_usb_hs_system_clk>,
|
|
<&clock_gcc clk_gcc_usb2a_phy_sleep_clk>,
|
|
<&clock_gcc clk_bimc_usb_a_clk>,
|
|
<&clock_gcc clk_pcnoc_usb_a_clk>,
|
|
<&clock_gcc clk_gcc_qusb2_phy_clk>,
|
|
<&clock_gcc clk_gcc_usb2_hs_phy_only_clk>,
|
|
<&clock_gcc clk_gcc_usb_hs_phy_cfg_ahb_clk>,
|
|
<&clock_gcc clk_xo_otg_clk>;
|
|
clock-names = "iface_clk", "core_clk", "sleep_clk",
|
|
"bimc_clk", "pcnoc_clk", "phy_reset_clk",
|
|
"phy_por_clk", "phy_csr_clk", "xo";
|
|
qcom,bus-clk-rate = <240000000 0 100000000
|
|
120000000 0 50000000>;
|
|
qcom,max-nominal-sysclk-rate = <133330000>;
|
|
qcom,max-svs-sysclk-rate = <69500000>;
|
|
qcom,default-mode-svs;
|
|
|
|
qcom,usbbam@78c4000 {
|
|
compatible = "qcom,usb-bam-msm";
|
|
reg = <0x78c4000 0x15000>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 135 0>;
|
|
qcom,bam-type = <1>;
|
|
qcom,usb-bam-num-pipes = <2>;
|
|
qcom,usb-bam-fifo-baseaddr = <0x08603800>;
|
|
qcom,ignore-core-reset-ack;
|
|
qcom,disable-clk-gating;
|
|
qcom,reset-bam-on-disconnect;
|
|
|
|
qcom,pipe0 {
|
|
label = "hsusb-qdss-in-0";
|
|
qcom,usb-bam-mem-type = <2>;
|
|
qcom,dir = <1>;
|
|
qcom,pipe-num = <0>;
|
|
qcom,peer-bam = <0>;
|
|
qcom,peer-bam-physical-address = <0x6084000>;
|
|
qcom,src-bam-pipe-index = <0>;
|
|
qcom,dst-bam-pipe-index = <0>;
|
|
qcom,data-fifo-offset = <0x0>;
|
|
qcom,data-fifo-size = <0x600>;
|
|
qcom,descriptor-fifo-offset = <0x600>;
|
|
qcom,descriptor-fifo-size = <0x200>;
|
|
};
|
|
};
|
|
};
|
|
|
|
android_usb: android_usb@086000c8 {
|
|
compatible = "qcom,android-usb";
|
|
reg = <0x086000c8 0xc8>;
|
|
qcom,pm-qos-latency = <2 1001 12701>;
|
|
};
|
|
|
|
hsic: hsic@7c00000 {
|
|
compatible = "qcom,hsic-peripheral";
|
|
reg = <0x7c00000 0x352>,
|
|
<0x1100000 0x1200c>;
|
|
interrupts = <0 141 0>, <0 142 0>;
|
|
qcom,hsic-usb-core-id = <1>;
|
|
vdd-supply = <&mdm9607_l9>;
|
|
qcom,vdd-voltage-level = <0 1225000 1225000>;
|
|
qcom,hsic-tlmm-init-seq =
|
|
<0x12008 0x5 0x12004 0x5 0x12000 0x1>;
|
|
qcom,hsic-disable-on-boot;
|
|
|
|
clocks = <&clock_gcc clk_gcc_usb_hsic_ahb_clk>,
|
|
<&clock_gcc clk_gcc_usb_hsic_system_clk>,
|
|
<&clock_gcc clk_gcc_usb_hsic_clk>,
|
|
<&clock_gcc clk_gcc_usb_hsic_io_cal_clk>,
|
|
<&clock_gcc clk_gcc_usb_hsic_io_cal_sleep_clk>;
|
|
clock-names = "iface_clk", "core_clk", "phy_clk",
|
|
"cal_clk", "cal_sleep_clk";
|
|
|
|
qcom,msm-bus,name = "hsic";
|
|
qcom,msm-bus,num-cases = <2>;
|
|
qcom,msm-bus,num-paths = <1>;
|
|
qcom,msm-bus,vectors-KBps =
|
|
<85 512 0 0>,
|
|
<85 512 6000 6000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
android_usb_hsic: android_usb-hsic {
|
|
compatible = "qcom,android-usb";
|
|
qcom,usb-core-id = <1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
hsic_host: hsic_host@7c00000 {
|
|
compatible = "qcom,hsic-host";
|
|
reg = <0x7c00000 0x352>,
|
|
<0x1100000 0x1200c>;
|
|
interrupts = <0 141 0>, <0 142 0>;
|
|
interrupt-names = "core_irq", "async_irq";
|
|
hsic_vdd_dig-supply = <&mdm9607_l9>;
|
|
hsic,vdd-voltage-level = <0 1225000 1225000>;
|
|
qcom,hsic-tlmm-init-seq =
|
|
<0x12008 0x5 0x12004 0x5 0x12000 0x1>;
|
|
qcom,phy-susp-sof-workaround;
|
|
qcom,disable-internal-clk-gating;
|
|
|
|
clocks = <&clock_gcc clk_gcc_usb_hsic_ahb_clk>,
|
|
<&clock_gcc clk_gcc_usb_hsic_system_clk>,
|
|
<&clock_gcc clk_gcc_usb_hsic_clk>,
|
|
<&clock_gcc clk_gcc_usb_hsic_io_cal_clk>,
|
|
<&clock_gcc clk_gcc_usb_hsic_io_cal_sleep_clk>;
|
|
clock-names = "iface_clk", "core_clk", "phy_clk",
|
|
"cal_clk", "inactivity_clk";
|
|
|
|
qcom,msm-bus,name = "hsic";
|
|
qcom,msm-bus,num-cases = <2>;
|
|
qcom,msm-bus,num-paths = <1>;
|
|
qcom,msm-bus,vectors-KBps =
|
|
<85 512 0 0>,
|
|
<85 512 60000 800000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
qnand_1: nand@7980000 {
|
|
compatible = "qcom,msm-nand";
|
|
reg = <0x07980000 0x1000>,
|
|
<0x07984000 0x1a000>;
|
|
reg-names = "nand_phys",
|
|
"bam_phys";
|
|
interrupts = <0 132 0>;
|
|
interrupt-names = "bam_irq";
|
|
|
|
qcom,msm-bus,name = "qpic_nand";
|
|
qcom,msm-bus,num-cases = <2>;
|
|
qcom,msm-bus,num-paths = <1>;
|
|
|
|
qcom,msm-bus,vectors-KBps =
|
|
<91 512 0 0>,
|
|
/* Voting for max b/w on PNOC bus for now */
|
|
<91 512 400000 800000>;
|
|
|
|
clock-names = "core_clk";
|
|
clocks = <&clock_gcc clk_qpic_clk>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhc_1: sdhci@7824900 {
|
|
compatible = "qcom,sdhci-msm";
|
|
reg = <0x7824900 0x200>, <0x7824000 0x800>, <0x01111000 0x4>;
|
|
reg-names = "hc_mem", "core_mem", "tlmm_mem";
|
|
|
|
qcom,cpu-dma-latency-us = <701>;
|
|
qcom,bus-width = <4>;
|
|
gpios = <&tlmm_pinmux 16 0>, /* CLK */
|
|
<&tlmm_pinmux 17 0>, /* CMD */
|
|
<&tlmm_pinmux 15 0>, /* DATA0 */
|
|
<&tlmm_pinmux 14 0>, /* DATA1 */
|
|
<&tlmm_pinmux 13 0>, /* DATA2 */
|
|
<&tlmm_pinmux 12 0>; /* DATA3 */
|
|
qcom,gpio-names = "CLK", "CMD", "DAT0", "DAT1", "DAT2", "DAT3";
|
|
|
|
qcom,clk-rates = <400000 20000000 25000000 50000000 100000000
|
|
200000000>;
|
|
|
|
clock-names = "iface_clk", "core_clk";
|
|
clocks = <&clock_gcc clk_gcc_sdcc1_ahb_clk>,
|
|
<&clock_gcc clk_gcc_sdcc1_apps_clk>;
|
|
|
|
qcom,msm-bus,name = "sdhc1";
|
|
qcom,msm-bus,num-cases = <8>;
|
|
qcom,msm-bus,num-paths = <1>;
|
|
qcom,msm-bus,vectors-KBps = <78 512 0 0>, /* No vote */
|
|
<78 512 1600 3200>, /* 400 KB/s*/
|
|
<78 512 80000 160000>, /* 20 MB/s */
|
|
<78 512 100000 200000>, /* 25 MB/s */
|
|
<78 512 200000 400000>, /* 50 MB/s */
|
|
<78 512 400000 800000>, /* 100 MB/s */
|
|
<78 512 800000 800000>, /* 200 MB/s */
|
|
<78 512 2048000 4096000>; /* Max. bandwidth */
|
|
qcom,bus-bw-vectors-bps = <0 400000 20000000 25000000
|
|
50000000 100000000 200000000 4294967295>;
|
|
|
|
#address-cells = <0>;
|
|
interrupt-parent = <&sdhc_1>;
|
|
interrupts = <0 1 2>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0xffffffff>;
|
|
interrupt-map = <0 &intc 0 123 0
|
|
1 &intc 0 138 0
|
|
2 &tlmm_pinmux 59 0x4>;
|
|
interrupt-names = "hc_irq", "pwr_irq", "sdiowakeup_irq";
|
|
|
|
qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50",
|
|
"DDR50","SDR104";
|
|
|
|
qcom,pm-qos-irq-type = "affine_irq";
|
|
qcom,pm-qos-irq-latency = <2 250>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
tsens: tsens@4a8000 {
|
|
compatible = "qcom,mdm9607-tsens";
|
|
reg = <0x4a8000 0x2000>,
|
|
<0xa4000 0x1000>;
|
|
reg-names = "tsens_physical", "tsens_eeprom_physical";
|
|
interrupts = <0 184 0>;
|
|
interrupt-names = "tsens-upper-lower";
|
|
qcom,sensors = <5>;
|
|
qcom,slope = <3000 3000 3000 3000 3000>;
|
|
qcom,sensor-id = <0 1 2 3 4>;
|
|
qcom,temp1-offset = <1 (-4) 4 (-3) (-4)>;
|
|
qcom,temp2-offset = <1 (-2) 8 (-5) (-4)>;
|
|
};
|
|
|
|
wcd9xxx_intc: wcd9xxx-irq {
|
|
compatible = "qcom,wcd9xxx-irq";
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
interrupt-parent = <&tlmm_pinmux>;
|
|
qcom,gpio-connect = <&tlmm_pinmux 75 0>;
|
|
interrupt-names = "cdc-int";
|
|
};
|
|
|
|
sound-9330 {
|
|
compatible = "qcom,mdm9607-audio-tomtom";
|
|
qcom,model = "mdm9607-tomtom-i2s-snd-card";
|
|
|
|
qcom,audio-routing =
|
|
"RX_BIAS", "MCLK",
|
|
"LDO_H", "MCLK",
|
|
"AMIC2", "MIC BIAS2 External",
|
|
"MIC BIAS2 External", "Headset Mic",
|
|
"AMIC3", "MIC BIAS2 External",
|
|
"MIC BIAS2 External", "ANCRight Headset Mic",
|
|
"AMIC4", "MIC BIAS2 External",
|
|
"MIC BIAS2 External", "ANCLeft Headset Mic",
|
|
"AMIC5", "MIC BIAS1 External",
|
|
"MIC BIAS1 External", "Handset Mic",
|
|
"AMIC6", "MIC BIAS1 External",
|
|
"MIC BIAS1 External", "Handset Mic",
|
|
"DMIC1", "MIC BIAS1 External",
|
|
"MIC BIAS1 External", "Digital Mic1",
|
|
"DMIC3", "MIC BIAS3 External",
|
|
"MIC BIAS3 External", "Digital Mic3";
|
|
|
|
qcom,codec-mclk-clk-freq = <12288000>;
|
|
qcom,mi2s-interface-mode = "pri_mi2s_master", "sec_mi2s_master";
|
|
qcom,auxpcm-interface-mode = "pri_pcm_master", "sec_pcm_master";
|
|
asoc-platform = <&pcm0>, <&pcm1>, <&voip>, <&voice>,
|
|
<&loopback>, <&hostless>, <&afe>, <&routing>,
|
|
<&pcm_dtmf>, <&host_pcm>;
|
|
asoc-platform-names = "msm-pcm-dsp.0", "msm-pcm-dsp.1",
|
|
"msm-voip-dsp", "msm-pcm-voice",
|
|
"msm-pcm-loopback", "msm-pcm-hostless",
|
|
"msm-pcm-afe", "msm-pcm-routing",
|
|
"msm-pcm-dtmf", "msm-voice-host-pcm";
|
|
asoc-cpu = <&dai_pri_auxpcm>, <&dai_sec_auxpcm>,
|
|
<&mi2s_prim>, <&mi2s_sec>, <&dtmf_tx>,
|
|
<&rx_capture_tx>, <&rx_playback_rx>,
|
|
<&tx_capture_tx>, <&tx_playback_rx>,
|
|
<&afe_pcm_rx>, <&afe_pcm_tx>, <&afe_proxy_rx>,
|
|
<&afe_proxy_tx>, <&incall_record_rx>,
|
|
<&incall_record_tx>, <&incall_music_rx>;
|
|
asoc-cpu-names = "msm-dai-q6-auxpcm.1", "msm-dai-q6-auxpcm.2",
|
|
"msm-dai-q6-mi2s.0", "msm-dai-q6-mi2s.1",
|
|
"msm-dai-stub-dev.4", "msm-dai-stub-dev.5",
|
|
"msm-dai-stub-dev.6", "msm-dai-stub-dev.7",
|
|
"msm-dai-stub-dev.8", "msm-dai-q6-dev.224",
|
|
"msm-dai-q6-dev.225", "msm-dai-q6-dev.241",
|
|
"msm-dai-q6-dev.240", "msm-dai-q6-dev.32771",
|
|
"msm-dai-q6-dev.32772", "msm-dai-q6-dev.32773";
|
|
asoc-codec = <&stub_codec>;
|
|
asoc-codec-names = "msm-stub-codec.1";
|
|
};
|
|
|
|
sound-9306 {
|
|
compatible = "qcom,mdm9607-audio-tapan";
|
|
qcom,model = "mdm9607-tapan-i2s-snd-card";
|
|
status = "disabled";
|
|
|
|
qcom,audio-routing =
|
|
"RX_BIAS", "MCLK",
|
|
"LDO_H", "MCLK",
|
|
"SPK_OUT", "MCLK",
|
|
"AMIC1", "MIC BIAS1 External",
|
|
"MIC BIAS1 External", "Handset Mic",
|
|
"AMIC2", "MIC BIAS2 External",
|
|
"MIC BIAS2 External", "Headset Mic",
|
|
"AMIC4", "MIC BIAS2 External",
|
|
"MIC BIAS2 External", "ANCRight Headset Mic",
|
|
"AMIC5", "MIC BIAS2 External",
|
|
"MIC BIAS2 External", "ANCLeft Headset Mic",
|
|
"DMIC1", "MIC BIAS1 External",
|
|
"MIC BIAS1 External", "Digital Mic1",
|
|
"DMIC2", "MIC BIAS1 External",
|
|
"MIC BIAS1 External", "Digital Mic2",
|
|
"DMIC3", "MIC BIAS3 External",
|
|
"MIC BIAS3 External", "Digital Mic3",
|
|
"DMIC4", "MIC BIAS3 External",
|
|
"MIC BIAS3 External", "Digital Mic4";
|
|
|
|
qcom,codec-mclk-clk-freq = <12288000>;
|
|
qcom,mi2s-interface-mode = "pri_mi2s_master", "sec_mi2s_master";
|
|
qcom,auxpcm-interface-mode = "pri_pcm_master", "sec_pcm_master";
|
|
asoc-platform = <&pcm0>, <&pcm1>, <&voip>, <&voice>,
|
|
<&loopback>, <&hostless>, <&afe>, <&routing>,
|
|
<&pcm_dtmf>, <&host_pcm>;
|
|
asoc-platform-names = "msm-pcm-dsp.0", "msm-pcm-dsp.1",
|
|
"msm-voip-dsp", "msm-pcm-voice",
|
|
"msm-pcm-loopback", "msm-pcm-hostless",
|
|
"msm-pcm-afe", "msm-pcm-routing",
|
|
"msm-pcm-dtmf", "msm-voice-host-pcm";
|
|
asoc-cpu = <&dai_pri_auxpcm>, <&dai_sec_auxpcm>,
|
|
<&mi2s_prim>, <&mi2s_sec>, <&dtmf_tx>,
|
|
<&rx_capture_tx>, <&rx_playback_rx>,
|
|
<&tx_capture_tx>, <&tx_playback_rx>,
|
|
<&afe_pcm_rx>, <&afe_pcm_tx>, <&afe_proxy_rx>,
|
|
<&afe_proxy_tx>, <&incall_record_rx>,
|
|
<&incall_record_tx>, <&incall_music_rx>;
|
|
asoc-cpu-names = "msm-dai-q6-auxpcm.1", "msm-dai-q6-auxpcm.2",
|
|
"msm-dai-q6-mi2s.0", "msm-dai-q6-mi2s.1",
|
|
"msm-dai-stub-dev.4", "msm-dai-stub-dev.5",
|
|
"msm-dai-stub-dev.6", "msm-dai-stub-dev.7",
|
|
"msm-dai-stub-dev.8", "msm-dai-q6-dev.224",
|
|
"msm-dai-q6-dev.225", "msm-dai-q6-dev.241",
|
|
"msm-dai-q6-dev.240", "msm-dai-q6-dev.32771",
|
|
"msm-dai-q6-dev.32772", "msm-dai-q6-dev.32773";
|
|
asoc-codec = <&stub_codec>;
|
|
asoc-codec-names = "msm-stub-codec.1";
|
|
};
|
|
|
|
qcom,msm-adsp-loader {
|
|
compatible = "qcom,adsp-loader";
|
|
qcom,adsp-state = <0>;
|
|
qcom,proc-img-to-load = "modem";
|
|
};
|
|
|
|
qcom,msm-audio-ion {
|
|
compatible = "qcom,msm-audio-ion";
|
|
};
|
|
|
|
pcm0: qcom,msm-pcm {
|
|
compatible = "qcom,msm-pcm-dsp";
|
|
qcom,msm-pcm-dsp-id = <0>;
|
|
};
|
|
|
|
routing: qcom,msm-pcm-routing {
|
|
compatible = "qcom,msm-pcm-routing";
|
|
};
|
|
|
|
pcm1: qcom,msm-pcm-low-latency {
|
|
compatible = "qcom,msm-pcm-dsp";
|
|
qcom,msm-pcm-dsp-id = <1>;
|
|
qcom,msm-pcm-low-latency;
|
|
qcom,latency-level = "ultra";
|
|
};
|
|
|
|
qcom,msm-compr-dsp {
|
|
compatible = "qcom,msm-compr-dsp";
|
|
};
|
|
|
|
voip: qcom,msm-voip-dsp {
|
|
compatible = "qcom,msm-voip-dsp";
|
|
};
|
|
|
|
voice: qcom,msm-pcm-voice {
|
|
compatible = "qcom,msm-pcm-voice";
|
|
qcom,destroy-cvd;
|
|
};
|
|
|
|
stub_codec: qcom,msm-stub-codec {
|
|
compatible = "qcom,msm-stub-codec";
|
|
};
|
|
|
|
qcom,msm-dai-fe {
|
|
compatible = "qcom,msm-dai-fe";
|
|
};
|
|
|
|
afe: qcom,msm-pcm-afe {
|
|
compatible = "qcom,msm-pcm-afe";
|
|
};
|
|
|
|
hostless: qcom,msm-pcm-hostless {
|
|
compatible = "qcom,msm-pcm-hostless";
|
|
};
|
|
|
|
host_pcm: qcom,msm-voice-host-pcm {
|
|
compatible = "qcom,msm-voice-host-pcm";
|
|
};
|
|
|
|
loopback: qcom,msm-pcm-loopback {
|
|
compatible = "qcom,msm-pcm-loopback";
|
|
};
|
|
|
|
qcom,msm-dai-stub {
|
|
compatible = "qcom,msm-dai-stub";
|
|
dtmf_tx: qcom,msm-dai-stub-dtmf-tx {
|
|
compatible = "qcom,msm-dai-stub-dev";
|
|
qcom,msm-dai-stub-dev-id = <4>;
|
|
};
|
|
|
|
rx_capture_tx: qcom,msm-dai-stub-host-rx-capture-tx {
|
|
compatible = "qcom,msm-dai-stub-dev";
|
|
qcom,msm-dai-stub-dev-id = <5>;
|
|
};
|
|
|
|
rx_playback_rx: qcom,msm-dai-stub-host-rx-playback-rx {
|
|
compatible = "qcom,msm-dai-stub-dev";
|
|
qcom,msm-dai-stub-dev-id = <6>;
|
|
};
|
|
|
|
tx_capture_tx: qcom,msm-dai-stub-host-tx-capture-tx {
|
|
compatible = "qcom,msm-dai-stub-dev";
|
|
qcom,msm-dai-stub-dev-id = <7>;
|
|
};
|
|
|
|
tx_playback_rx: qcom,msm-dai-stub-host-tx-playback-rx {
|
|
compatible = "qcom,msm-dai-stub-dev";
|
|
qcom,msm-dai-stub-dev-id = <8>;
|
|
};
|
|
};
|
|
|
|
qcom,msm-dai-q6 {
|
|
compatible = "qcom,msm-dai-q6";
|
|
afe_pcm_rx: qcom,msm-dai-q6-be-afe-pcm-rx {
|
|
compatible = "qcom,msm-dai-q6-dev";
|
|
qcom,msm-dai-q6-dev-id = <224>;
|
|
};
|
|
|
|
afe_pcm_tx: qcom,msm-dai-q6-be-afe-pcm-tx {
|
|
compatible = "qcom,msm-dai-q6-dev";
|
|
qcom,msm-dai-q6-dev-id = <225>;
|
|
};
|
|
|
|
afe_proxy_rx: qcom,msm-dai-q6-afe-proxy-rx {
|
|
compatible = "qcom,msm-dai-q6-dev";
|
|
qcom,msm-dai-q6-dev-id = <241>;
|
|
};
|
|
|
|
afe_proxy_tx: qcom,msm-dai-q6-afe-proxy-tx {
|
|
compatible = "qcom,msm-dai-q6-dev";
|
|
qcom,msm-dai-q6-dev-id = <240>;
|
|
};
|
|
|
|
incall_record_rx: qcom,msm-dai-q6-incall-record-rx {
|
|
compatible = "qcom,msm-dai-q6-dev";
|
|
qcom,msm-dai-q6-dev-id = <32771>;
|
|
};
|
|
|
|
incall_record_tx: qcom,msm-dai-q6-incall-record-tx {
|
|
compatible = "qcom,msm-dai-q6-dev";
|
|
qcom,msm-dai-q6-dev-id = <32772>;
|
|
};
|
|
|
|
incall_music_rx: qcom,msm-dai-q6-incall-music-rx {
|
|
compatible = "qcom,msm-dai-q6-dev";
|
|
qcom,msm-dai-q6-dev-id = <32773>;
|
|
};
|
|
};
|
|
|
|
pcm_dtmf: qcom,msm-pcm-dtmf {
|
|
compatible = "qcom,msm-pcm-dtmf";
|
|
};
|
|
|
|
dai_pri_auxpcm: qcom,msm-pri-auxpcm {
|
|
compatible = "qcom,msm-auxpcm-dev";
|
|
qcom,msm-cpudai-auxpcm-mode = <0>, <0>;
|
|
qcom,msm-cpudai-auxpcm-sync = <1>, <1>;
|
|
qcom,msm-cpudai-auxpcm-frame = <5>, <4>;
|
|
qcom,msm-cpudai-auxpcm-quant = <2>, <2>;
|
|
qcom,msm-cpudai-auxpcm-num-slots = <1>, <1>;
|
|
qcom,msm-cpudai-auxpcm-slot-mapping = <1>, <1>;
|
|
qcom,msm-cpudai-auxpcm-data = <0>, <0>;
|
|
qcom,msm-cpudai-auxpcm-pcm-clk-rate = <2048000>, <2048000>;
|
|
qcom,msm-auxpcm-interface = "primary";
|
|
};
|
|
|
|
dai_sec_auxpcm: qcom,msm-sec-auxpcm {
|
|
compatible = "qcom,msm-auxpcm-dev";
|
|
qcom,msm-cpudai-auxpcm-mode = <0>, <0>;
|
|
qcom,msm-cpudai-auxpcm-sync = <1>, <1>;
|
|
qcom,msm-cpudai-auxpcm-frame = <5>, <4>;
|
|
qcom,msm-cpudai-auxpcm-quant = <2>, <2>;
|
|
qcom,msm-cpudai-auxpcm-num-slots = <1>, <1>;
|
|
qcom,msm-cpudai-auxpcm-slot-mapping = <1>, <1>;
|
|
qcom,msm-cpudai-auxpcm-data = <0>, <0>;
|
|
qcom,msm-cpudai-auxpcm-pcm-clk-rate = <2048000>, <2048000>;
|
|
qcom,msm-auxpcm-interface = "secondary";
|
|
};
|
|
|
|
qcom,msm-dai-mi2s {
|
|
compatible = "qcom,msm-dai-mi2s";
|
|
mi2s_prim: qcom,msm-dai-q6-mi2s-prim {
|
|
compatible = "qcom,msm-dai-q6-mi2s";
|
|
qcom,msm-dai-q6-mi2s-dev-id = <0>;
|
|
qcom,msm-mi2s-rx-lines = <2>;
|
|
qcom,msm-mi2s-tx-lines = <1>;
|
|
pinctrl-names = "default", "idle";
|
|
pinctrl-0 = <&pri_mi2s_ws_active
|
|
&pri_mi2s_sck_active
|
|
&pri_mi2s_dout_active
|
|
&pri_mi2s_din_active>;
|
|
pinctrl-1 = <&pri_mi2s_ws_sleep
|
|
&pri_mi2s_sck_sleep
|
|
&pri_mi2s_dout_sleep
|
|
&pri_mi2s_din_sleep>;
|
|
};
|
|
mi2s_sec: qcom,msm-dai-q6-mi2s-sec {
|
|
compatible = "qcom,msm-dai-q6-mi2s";
|
|
qcom,msm-dai-q6-mi2s-dev-id = <1>;
|
|
qcom,msm-mi2s-rx-lines = <2>;
|
|
qcom,msm-mi2s-tx-lines = <1>;
|
|
};
|
|
};
|
|
|
|
qcom,msm-thermal {
|
|
compatible = "qcom,msm-thermal";
|
|
qcom,sensor-id = <4>;
|
|
qcom,poll-ms = <250>;
|
|
qcom,limit-temp = <60>;
|
|
qcom,temp-hysteresis = <10>;
|
|
qcom,freq-step = <2>;
|
|
qcom,freq-mitigation-temp = <105>;
|
|
qcom,freq-mitigation-temp-hysteresis = <15>;
|
|
qcom,freq-mitigation-value = <800000>;
|
|
qcom,disable-cx-phase-ctrl;
|
|
qcom,disable-gfx-phase-ctrl;
|
|
qcom,disable-psm;
|
|
qcom,disable-ocr;
|
|
qcom,mx-restriction-temp = <10>;
|
|
qcom,mx-restriction-temp-hysteresis = <5>;
|
|
qcom,mx-retention-min =
|
|
<RPM_SMD_REGULATOR_LEVEL_NOM_PLUS>;
|
|
vdd-mx-supply = <&mdm9607_l12_floor_level>;
|
|
qcom,vdd-restriction-temp = <5>;
|
|
qcom,vdd-restriction-temp-hysteresis = <10>;
|
|
vdd-dig-supply = <&mdm9607_s3_floor_level>;
|
|
|
|
qcom,vdd-dig-rstr{
|
|
qcom,vdd-rstr-reg = "vdd-dig";
|
|
qcom,levels = <RPM_SMD_REGULATOR_LEVEL_NOM
|
|
RPM_SMD_REGULATOR_LEVEL_TURBO
|
|
RPM_SMD_REGULATOR_LEVEL_TURBO>;
|
|
qcom,min-level = <RPM_SMD_REGULATOR_LEVEL_RETENTION>;
|
|
};
|
|
|
|
msm_thermal_freq: qcom,vdd-apps-rstr {
|
|
qcom,vdd-rstr-reg = "vdd-apps";
|
|
qcom,levels = <998400>;
|
|
qcom,freq-req;
|
|
};
|
|
};
|
|
|
|
qcom,sensor-information {
|
|
compatible = "qcom,sensor-information";
|
|
sensor_information0: qcom,sensor-information-0 {
|
|
qcom,sensor-type = "tsens";
|
|
qcom,sensor-name = "tsens_tz_sensor0";
|
|
};
|
|
|
|
sensor_information1: qcom,sensor-information-1 {
|
|
qcom,sensor-type = "tsens";
|
|
qcom,sensor-name = "tsens_tz_sensor1";
|
|
};
|
|
|
|
sensor_information2: qcom,sensor-information-2 {
|
|
qcom,sensor-type = "tsens";
|
|
qcom,sensor-name = "tsens_tz_sensor2";
|
|
};
|
|
|
|
sensor_information3: qcom,sensor-information-3 {
|
|
qcom,sensor-type = "tsens";
|
|
qcom,sensor-name = "tsens_tz_sensor3";
|
|
};
|
|
|
|
sensor_information4: qcom,sensor-information-4 {
|
|
qcom,sensor-type = "tsens";
|
|
qcom,sensor-name = "tsens_tz_sensor4";
|
|
};
|
|
|
|
sensor_information5: qcom,sensor-information-5 {
|
|
qcom,sensor-type = "adc";
|
|
qcom,sensor-name = "pa_therm0";
|
|
};
|
|
|
|
sensor_information6: qcom,sensor-information-6 {
|
|
qcom,sensor-type = "adc";
|
|
qcom,sensor-name = "pa_therm1";
|
|
};
|
|
|
|
sensor_information7: qcom,sensor-information-7 {
|
|
qcom,sensor-type = "adc";
|
|
qcom,sensor-name = "xo_therm";
|
|
};
|
|
|
|
sensor_information8: qcom,sensor-information-8 {
|
|
qcom,sensor-type = "adc";
|
|
qcom,sensor-name = "xo_therm_amux";
|
|
};
|
|
};
|
|
|
|
mitigation_profile0: qcom,limit_info-0 {
|
|
qcom,temperature-sensor = <&sensor_information4>;
|
|
qcom,boot-frequency-mitigate;
|
|
qcom,emergency-frequency-mitigate;
|
|
};
|
|
|
|
qcom,ipc-spinlock@1905000 {
|
|
compatible = "qcom,ipc-spinlock-sfpb";
|
|
reg = <0x1905000 0x8000>;
|
|
qcom,num-locks = <8>;
|
|
};
|
|
|
|
qcom,smem@87d00000 {
|
|
compatible = "qcom,smem";
|
|
reg = <0x87d00000 0x100000>,
|
|
<0x0b011008 0x4>,
|
|
<0x60000 0x8000>,
|
|
<0x193d000 0x8>;
|
|
reg-names = "smem", "irq-reg-base", "aux-mem1",
|
|
"smem_targ_info_reg";
|
|
qcom,mpu-enabled;
|
|
|
|
qcom,smd-modem {
|
|
compatible = "qcom,smd";
|
|
qcom,smd-edge = <0>;
|
|
qcom,smd-irq-offset = <0x0>;
|
|
qcom,smd-irq-bitmask = <0x1000>;
|
|
interrupts = <0 25 1>;
|
|
label = "modem";
|
|
qcom,not-loadable;
|
|
};
|
|
|
|
qcom,smsm-modem {
|
|
compatible = "qcom,smsm";
|
|
qcom,smsm-edge = <0>;
|
|
qcom,smsm-irq-offset = <0x0>;
|
|
qcom,smsm-irq-bitmask = <0x2000>;
|
|
interrupts = <0 26 1>;
|
|
};
|
|
|
|
qcom,smd-rpm {
|
|
compatible = "qcom,smd";
|
|
qcom,smd-edge = <15>;
|
|
qcom,smd-irq-offset = <0x0>;
|
|
qcom,smd-irq-bitmask = <0x1>;
|
|
interrupts = <0 168 1>;
|
|
label = "rpm";
|
|
qcom,irq-no-suspend;
|
|
qcom,not-loadable;
|
|
};
|
|
};
|
|
|
|
rpm_bus: qcom,rpm-smd {
|
|
compatible = "qcom,rpm-smd";
|
|
rpm-channel-name = "rpm_requests";
|
|
rpm-channel-type = <15>; /* SMD_APPS_RPM */
|
|
};
|
|
|
|
qcom,smdtty {
|
|
compatible = "qcom,smdtty";
|
|
|
|
smdtty_data1: qcom,smdtty-data1 {
|
|
qcom,smdtty-remote = "modem";
|
|
qcom,smdtty-port-name = "DATA1";
|
|
};
|
|
|
|
smdtty_data4: qcom,smdtty-data4 {
|
|
qcom,smdtty-remote = "modem";
|
|
qcom,smdtty-port-name = "DATA4";
|
|
};
|
|
|
|
smdtty_data11: qcom,smdtty-data11 {
|
|
qcom,smdtty-remote = "modem";
|
|
qcom,smdtty-port-name = "DATA11";
|
|
};
|
|
|
|
smdtty_data21: qcom,smdtty-data21 {
|
|
qcom,smdtty-remote = "modem";
|
|
qcom,smdtty-port-name = "DATA21";
|
|
};
|
|
|
|
smdtty_loopback: smdtty-loopback {
|
|
qcom,smdtty-remote = "modem";
|
|
qcom,smdtty-port-name = "LOOPBACK";
|
|
qcom,smdtty-dev-name = "LOOPBACK_TTY";
|
|
};
|
|
};
|
|
|
|
qcom,smdpkt {
|
|
compatible = "qcom,smdpkt";
|
|
|
|
qcom,smdpkt-data5-cntl {
|
|
qcom,smdpkt-remote = "modem";
|
|
qcom,smdpkt-port-name = "DATA5_CNTL";
|
|
qcom,smdpkt-dev-name = "smdcntl0";
|
|
};
|
|
|
|
qcom,smdpkt-data22 {
|
|
qcom,smdpkt-remote = "modem";
|
|
qcom,smdpkt-port-name = "DATA22";
|
|
qcom,smdpkt-dev-name = "smd22";
|
|
};
|
|
|
|
qcom,smdpkt-data40-cntl {
|
|
qcom,smdpkt-remote = "modem";
|
|
qcom,smdpkt-port-name = "DATA40_CNTL";
|
|
qcom,smdpkt-dev-name = "smdcntl8";
|
|
};
|
|
|
|
qcom,smdpkt-apr-apps2 {
|
|
qcom,smdpkt-remote = "modem";
|
|
qcom,smdpkt-port-name = "apr_apps2";
|
|
qcom,smdpkt-dev-name = "apr_apps2";
|
|
};
|
|
|
|
qcom,smdpkt-loopback {
|
|
qcom,smdpkt-remote = "modem";
|
|
qcom,smdpkt-port-name = "LOOPBACK";
|
|
qcom,smdpkt-dev-name = "smd_pkt_loopback";
|
|
};
|
|
};
|
|
|
|
qcom,ipc_router {
|
|
compatible = "qcom,ipc_router";
|
|
qcom,node-id = <1>;
|
|
};
|
|
|
|
qcom,ipc_router_modem_xprt {
|
|
compatible = "qcom,ipc_router_smd_xprt";
|
|
qcom,ch-name = "IPCRTR";
|
|
qcom,xprt-remote = "modem";
|
|
qcom,xprt-linkid = <1>;
|
|
qcom,xprt-version = <1>;
|
|
qcom,fragmented-data;
|
|
qcom,disable-pil-loading;
|
|
};
|
|
|
|
qcom,bam_dmux@4044000 {
|
|
compatible = "qcom,bam_dmux";
|
|
reg = <0x4044000 0x19000>;
|
|
interrupts = <0 29 1>;
|
|
qcom,rx-ring-size = <32>;
|
|
qcom,max-rx-mtu = <4096>;
|
|
qcom,fast-shutdown;
|
|
};
|
|
|
|
spmi_bus: qcom,spmi@200f000 {
|
|
compatible = "qcom,spmi-pmic-arb";
|
|
reg = <0x200f000 0x1000>,
|
|
<0x2400000 0x800000>,
|
|
<0x2c00000 0x800000>,
|
|
<0x3800000 0x200000>,
|
|
<0x200a000 0x2100>;
|
|
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
|
|
interrupts = <0 190 0>;
|
|
qcom,pmic-arb-channel = <0>;
|
|
qcom,pmic-arb-max-peripherals = <128>;
|
|
qcom,pmic-arb-max-periph-interrupts = <128>;
|
|
qcom,pmic-arb-ee = <0>;
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <0>;
|
|
};
|
|
|
|
spi_1: spi@78b6000 { /* BLSP1 QUP1 */
|
|
compatible = "qcom,spi-qup-v2";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg-names = "spi_physical", "spi_bam_physical";
|
|
reg = <0x78b6000 0x600>,
|
|
<0x7884000 0x2b000>;
|
|
interrupt-names = "spi_irq", "spi_bam_irq";
|
|
interrupts = <0 96 0>, <0 238 0>;
|
|
spi-max-frequency = <19200000>;
|
|
pinctrl-names = "spi_default", "spi_sleep";
|
|
pinctrl-0 = <&spi1_default &spi1_cs0_active>;
|
|
pinctrl-1 = <&spi1_sleep &spi1_cs0_sleep>;
|
|
clocks = <&clock_gcc clk_gcc_blsp1_ahb_clk>,
|
|
<&clock_gcc clk_gcc_blsp1_qup2_spi_apps_clk>;
|
|
clock-names = "iface_clk", "core_clk";
|
|
qcom,infinite-mode = <0>;
|
|
qcom,use-bam;
|
|
qcom,use-pinctrl;
|
|
qcom,ver-reg-exists;
|
|
qcom,bam-consumer-pipe-index = <14>;
|
|
qcom,bam-producer-pipe-index = <15>;
|
|
qcom,master-id = <86>;
|
|
status = "disabled";
|
|
};
|
|
|
|
qcom,mss@4080000 {
|
|
compatible = "qcom,pil-q6v55-mss";
|
|
reg = <0x04080000 0x100>,
|
|
<0x0194f000 0x010>,
|
|
<0x01950000 0x008>,
|
|
<0x01951000 0x008>,
|
|
<0x04020000 0x040>,
|
|
<0x0183e000 0x004>;
|
|
reg-names = "qdsp6_base", "halt_q6", "halt_modem", "halt_nc",
|
|
"rmb_base", "restart_reg";
|
|
|
|
interrupts = <0 24 1>;
|
|
vdd_cx-supply = <&mdm9607_s3_level>;
|
|
vdd_cx-voltage = <RPM_SMD_REGULATOR_LEVEL_TURBO>;
|
|
vdd_mx-supply = <&mdm9607_l12_level>;
|
|
vdd_mx-uV = <RPM_SMD_REGULATOR_LEVEL_TURBO>;
|
|
vdd_pll-supply = <&mdm9607_l3>;
|
|
qcom,vdd_pll = <1800000>;
|
|
|
|
clocks = <&clock_gcc clk_xo_pil_mss_clk>,
|
|
<&clock_gcc clk_gcc_mss_cfg_ahb_clk>,
|
|
<&clock_gcc clk_gcc_mss_q6_bimc_axi_clk>,
|
|
<&clock_gcc clk_gcc_boot_rom_ahb_clk>;
|
|
clock-names = "xo", "iface_clk", "bus_clk", "mem_clk";
|
|
qcom,proxy-clock-names = "xo";
|
|
qcom,active-clock-names = "iface_clk", "bus_clk", "mem_clk";
|
|
|
|
qcom,firmware-name = "modem";
|
|
qcom,pil-self-auth;
|
|
qcom,sysmon-id = <0>;
|
|
qcom,ssctl-instance-id = <0x12>;
|
|
qcom,qdsp6v56-1-8-inrush-current;
|
|
|
|
/* GPIO inputs from mss */
|
|
qcom,gpio-err-fatal = <&smp2pgpio_ssr_smp2p_1_in 0 0>;
|
|
qcom,gpio-err-ready = <&smp2pgpio_ssr_smp2p_1_in 1 0>;
|
|
qcom,gpio-proxy-unvote = <&smp2pgpio_ssr_smp2p_1_in 2 0>;
|
|
qcom,gpio-stop-ack = <&smp2pgpio_ssr_smp2p_1_in 3 0>;
|
|
qcom,gpio-shutdown-ack = <&smp2pgpio_ssr_smp2p_1_in 7 0>;
|
|
|
|
/* GPIO output to mss */
|
|
qcom,gpio-force-stop = <&smp2pgpio_ssr_smp2p_1_out 0 0>;
|
|
memory-region = <&modem_adsp_mem>;
|
|
};
|
|
|
|
sdhc_2: sdhci@07864900 {
|
|
compatible = "qcom,sdhci-msm";
|
|
reg = <0x07864900 0x200>, <0x07864000 0x800>;
|
|
reg-names = "hc_mem", "core_mem";
|
|
|
|
interrupts = <0 125 0>, <0 221 0>;
|
|
interrupt-names = "hc_irq", "pwr_irq";
|
|
|
|
qcom,bus-width = <4>;
|
|
|
|
qcom,devfreq,freq-table = <50000000 200000000>;
|
|
|
|
qcom,msm-bus,name = "sdhc2";
|
|
qcom,msm-bus,num-cases = <8>;
|
|
qcom,msm-bus,num-paths = <1>;
|
|
qcom,msm-bus,vectors-KBps = <81 512 0 0>, /* No vote */
|
|
<81 512 1600 3200>, /* 400 KB/s*/
|
|
<81 512 80000 160000>, /* 20 MB/s */
|
|
<81 512 100000 200000>, /* 25 MB/s */
|
|
<81 512 200000 400000>, /* 50 MB/s */
|
|
<81 512 400000 800000>, /* 100 MB/s */
|
|
<81 512 800000 800000>, /* 200 MB/s */
|
|
<81 512 2048000 4096000>; /* Max. bandwidth */
|
|
qcom,bus-bw-vectors-bps = <0 400000 20000000 25000000 50000000
|
|
100000000 200000000 4294967295>;
|
|
|
|
clocks = <&clock_gcc clk_gcc_sdcc2_ahb_clk>,
|
|
<&clock_gcc clk_gcc_sdcc2_apps_clk>;
|
|
clock-names = "iface_clk", "core_clk";
|
|
|
|
qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>;
|
|
|
|
qcom,pm-qos-irq-type = "affine_irq";
|
|
qcom,pm-qos-irq-latency = <2 250>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
emac0: qcom,emac@7c40000 {
|
|
cell-index = <0>;
|
|
compatible = "qcom,mdm9607-emac";
|
|
reg-names = "emac", "emac_csr", "emac_1588", "emac_sgmii";
|
|
reg = <0x7c40000 0x10000>,
|
|
<0x7c56000 0x1000>,
|
|
<0x7c5C000 0x4000>,
|
|
<0x7c58000 0x400>;
|
|
#address-cells = <0>;
|
|
interrupt-parent = <&emac0>;
|
|
#interrupt-cells = <1>;
|
|
interrupts = <0 1 2>;
|
|
interrupt-map-mask = <0xffffffff>;
|
|
interrupt-map = <0 &intc 0 76 0
|
|
1 &intc 0 80 0
|
|
2 &tlmm_pinmux 30 0x8>;
|
|
interrupt-names = "emac_core0_irq",
|
|
"emac_sgmii_irq",
|
|
"emac_wol_irq";
|
|
emac_vreg1-supply = <&mdm9607_l1>;
|
|
emac_vreg2-supply = <&mdm9607_l3>;
|
|
emac_vreg3-supply = <&mdm9607_l5>;
|
|
emac_vreg4-supply = <&mdm9607_l11>;
|
|
emac_vreg5-supply = <&emac_lan_vreg>;
|
|
qcom,vdd-voltage-level = <1250000 1800000 2850000 1800000 0>;
|
|
clocks = <&clock_gcc clk_gcc_emac_0_axi_clk>,
|
|
<&clock_gcc clk_gcc_emac_0_ahb_clk>,
|
|
<&clock_gcc clk_gcc_emac_0_125m_clk>,
|
|
<&clock_gcc clk_gcc_emac_0_sys_25m_clk>,
|
|
<&clock_gcc clk_gcc_emac_0_tx_clk>,
|
|
<&clock_gcc clk_gcc_emac_0_rx_clk>,
|
|
<&clock_gcc clk_gcc_emac_0_sys_clk>;
|
|
clock-names = "axi_clk", "cfg_ahb_clk", "125m_clk",
|
|
"25m_clk", "tx_clk", "rx_clk", "sys_clk";
|
|
pinctrl-names = "emac_mdio_active", "emac_mdio_sleep",
|
|
"emac_ephy_active", "emac_ephy_sleep";
|
|
pinctrl-0 = <&emac0_mdio_active>;
|
|
pinctrl-1 = <&emac0_mdio_sleep>;
|
|
pinctrl-2 = <&emac0_ephy_active>;
|
|
pinctrl-3 = <&emac0_ephy_sleep>;
|
|
qcom,emac-tstamp-en;
|
|
qcom,emac-ptp-frac-ns-adj = <125000000 1>;
|
|
phy-mode = "sgmii";
|
|
phy-addr = <0>;
|
|
status = "disable";
|
|
};
|
|
};
|
|
|
|
#include "mdm9607-rpm-regulator.dtsi"
|
|
#include "msm-pm8019.dtsi"
|
|
#include "mdm9607-regulator.dtsi"
|
|
|
|
/* MPP pin 1 config for USB ID interrupt line */
|
|
&pm8019_mpps {
|
|
mpp@a000 {
|
|
qcom,mode = <0>; /* Digital input */
|
|
qcom,vin-sel = <3>; /* 1.8V (L11) */
|
|
qcom,src-sel = <0>; /* QPNP_PIN_SEL_FUNC_CONSTANT */
|
|
qcom,pull = <2>; /* PULL UP 10KOHM */
|
|
qcom,master-en = <1>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&usb_otg {
|
|
vbus_otg-supply = <&smb358_otg_vreg>;
|
|
};
|
|
|
|
&pm8019_vadc {
|
|
chan@6 {
|
|
label = "vbat_sns";
|
|
reg = <6>;
|
|
qcom,decimation = <0>;
|
|
qcom,pre-div-channel-scaling = <1>;
|
|
qcom,calibration-type = "absolute";
|
|
qcom,scale-function = <0>;
|
|
qcom,hw-settle-time = <0>;
|
|
qcom,fast-avg-setup = <0>;
|
|
};
|
|
|
|
chan@7 {
|
|
label = "vph_pwr";
|
|
reg = <7>;
|
|
qcom,decimation = <0>;
|
|
qcom,pre-div-channel-scaling = <1>;
|
|
qcom,calibration-type = "absolute";
|
|
qcom,scale-function = <0>;
|
|
qcom,hw-settle-time = <0>;
|
|
qcom,fast-avg-setup = <0>;
|
|
};
|
|
|
|
chan@31 {
|
|
label = "batt_id_therm";
|
|
reg = <0x31>;
|
|
qcom,decimation = <0>;
|
|
qcom,pre-div-channel-scaling = <0>;
|
|
qcom,calibration-type = "ratiometric";
|
|
qcom,scale-function = <0>;
|
|
qcom,hw-settle-time = <2>;
|
|
qcom,fast-avg-setup = <0>;
|
|
};
|
|
|
|
chan@33 {
|
|
label = "pa_therm0";
|
|
reg = <0x33>;
|
|
qcom,decimation = <0>;
|
|
qcom,pre-div-channel-scaling = <0>;
|
|
qcom,calibration-type = "ratiometric";
|
|
qcom,scale-function = <2>;
|
|
qcom,hw-settle-time = <2>;
|
|
qcom,fast-avg-setup = <0>;
|
|
};
|
|
|
|
chan@34 {
|
|
label = "pa_therm1";
|
|
reg = <0x34>;
|
|
qcom,decimation = <0>;
|
|
qcom,pre-div-channel-scaling = <0>;
|
|
qcom,calibration-type = "ratiometric";
|
|
qcom,scale-function = <2>;
|
|
qcom,hw-settle-time = <2>;
|
|
qcom,fast-avg-setup = <0>;
|
|
};
|
|
|
|
chan@32 {
|
|
label = "xo_therm";
|
|
reg = <0x32>;
|
|
qcom,decimation = <0>;
|
|
qcom,pre-div-channel-scaling = <0>;
|
|
qcom,calibration-type = "ratiometric";
|
|
qcom,scale-function = <4>;
|
|
qcom,hw-settle-time = <2>;
|
|
qcom,fast-avg-setup = <0>;
|
|
};
|
|
|
|
chan@3c {
|
|
label = "xo_therm_amux";
|
|
reg = <0x3c>;
|
|
qcom,decimation = <0>;
|
|
qcom,pre-div-channel-scaling = <0>;
|
|
qcom,calibration-type = "ratiometric";
|
|
qcom,scale-function = <4>;
|
|
qcom,hw-settle-time = <2>;
|
|
qcom,fast-avg-setup = <0>;
|
|
};
|
|
};
|
|
|
|
&pm8019_adc_tm {
|
|
/* Channel Node */
|
|
chan@33 {
|
|
label = "pa_therm0";
|
|
reg = <0x33>;
|
|
qcom,decimation = <0>;
|
|
qcom,pre-div-channel-scaling = <0>;
|
|
qcom,calibration-type = "ratiometric";
|
|
qcom,scale-function = <2>;
|
|
qcom,hw-settle-time = <2>;
|
|
qcom,fast-avg-setup = <0>;
|
|
qcom,btm-channel-number = <0x48>;
|
|
qcom,thermal-node;
|
|
};
|
|
|
|
chan@34 {
|
|
label = "pa_therm1";
|
|
reg = <0x34>;
|
|
qcom,decimation = <0>;
|
|
qcom,pre-div-channel-scaling = <0>;
|
|
qcom,calibration-type = "ratiometric";
|
|
qcom,scale-function = <2>;
|
|
qcom,hw-settle-time = <2>;
|
|
qcom,fast-avg-setup = <0>;
|
|
qcom,btm-channel-number = <0x68>;
|
|
qcom,thermal-node;
|
|
};
|
|
};
|