44 lines
1.6 KiB
Plaintext
44 lines
1.6 KiB
Plaintext
Device-Tree bindings for drm hdmi driver
|
|
|
|
Required properties:
|
|
- compatible: value should be one among the following:
|
|
1) "samsung,exynos5-hdmi" <DEPRECATED>
|
|
2) "samsung,exynos4210-hdmi"
|
|
3) "samsung,exynos4212-hdmi"
|
|
4) "samsung,exynos5420-hdmi"
|
|
- reg: physical base address of the hdmi and length of memory mapped
|
|
region.
|
|
- interrupts: interrupt number to the cpu.
|
|
- hpd-gpio: following information about the hotplug gpio pin.
|
|
a) phandle of the gpio controller node.
|
|
b) pin number within the gpio controller.
|
|
c) optional flags and pull up/down.
|
|
- clocks: list of clock IDs from SoC clock driver.
|
|
a) hdmi: Gate of HDMI IP bus clock.
|
|
b) sclk_hdmi: Gate of HDMI special clock.
|
|
c) sclk_pixel: Pixel special clock, one of the two possible inputs of
|
|
HDMI clock mux.
|
|
d) sclk_hdmiphy: HDMI PHY clock output, one of two possible inputs of
|
|
HDMI clock mux.
|
|
e) mout_hdmi: It is required by the driver to switch between the 2
|
|
parents i.e. sclk_pixel and sclk_hdmiphy. If hdmiphy is stable
|
|
after configuration, parent is set to sclk_hdmiphy else
|
|
sclk_pixel.
|
|
- clock-names: aliases as per driver requirements for above clock IDs:
|
|
"hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy" and "mout_hdmi".
|
|
- ddc: phandle to the hdmi ddc node
|
|
- phy: phandle to the hdmi phy node
|
|
- samsung,syscon-phandle: phandle for system controller node for PMU.
|
|
|
|
Example:
|
|
|
|
hdmi {
|
|
compatible = "samsung,exynos4212-hdmi";
|
|
reg = <0x14530000 0x100000>;
|
|
interrupts = <0 95 0>;
|
|
hpd-gpio = <&gpx3 7 1>;
|
|
ddc = <&hdmi_ddc_node>;
|
|
phy = <&hdmi_phy_node>;
|
|
samsung,syscon-phandle = <&pmu_system_controller>;
|
|
};
|