41 lines
1.4 KiB
Plaintext
41 lines
1.4 KiB
Plaintext
USB COMPARATOR OF TWL CHIPS
|
|
|
|
TWL6030 USB COMPARATOR
|
|
- compatible : Should be "ti,twl6030-usb"
|
|
- interrupts : Two interrupt numbers to the cpu should be specified. First
|
|
interrupt number is the otg interrupt number that raises ID interrupts when
|
|
the controller has to act as host and the second interrupt number is the
|
|
usb interrupt number that raises VBUS interrupts when the controller has to
|
|
act as device
|
|
- usb-supply : phandle to the regulator device tree node. It should be vusb
|
|
if it is twl6030 or ldousb if it is twl6032 subclass.
|
|
|
|
twl6030-usb {
|
|
compatible = "ti,twl6030-usb";
|
|
interrupts = < 4 10 >;
|
|
};
|
|
|
|
Board specific device node entry
|
|
&twl6030-usb {
|
|
usb-supply = <&vusb>;
|
|
};
|
|
|
|
TWL4030 USB PHY AND COMPARATOR
|
|
- compatible : Should be "ti,twl4030-usb"
|
|
- interrupts : The interrupt numbers to the cpu should be specified. First
|
|
interrupt number is the otg interrupt number that raises ID interrupts
|
|
and VBUS interrupts. The second interrupt number is optional.
|
|
- <supply-name>-supply : phandle to the regulator device tree node.
|
|
<supply-name> should be vusb1v5, vusb1v8 and vusb3v1
|
|
- usb_mode : The mode used by the phy to connect to the controller. "1"
|
|
specifies "ULPI" mode and "2" specifies "CEA2011_3PIN" mode.
|
|
|
|
twl4030-usb {
|
|
compatible = "ti,twl4030-usb";
|
|
interrupts = < 10 4 >;
|
|
usb1v5-supply = <&vusb1v5>;
|
|
usb1v8-supply = <&vusb1v8>;
|
|
usb3v1-supply = <&vusb3v1>;
|
|
usb_mode = <1>;
|
|
};
|