69 lines
2.4 KiB
Plaintext
69 lines
2.4 KiB
Plaintext
Qualcomm QPNP Temperature Alarm
|
|
|
|
QPNP temperature alarm peripherals are found inside of Qualcomm PMIC chips that
|
|
utilize the MSM SPMI implementation. These peripherals provide an interrupt
|
|
signal and status register to identify high PMIC die temperature.
|
|
|
|
Required properties:
|
|
- compatible: Must be "qcom,qpnp-temp-alarm".
|
|
- reg: Specifies the SPMI address and size for this temperature
|
|
alarm device.
|
|
- interrupts: PMIC temperature alarm interrupt
|
|
- label: A string used as a descriptive name for this thermal device.
|
|
This name should be 19 characters or less.
|
|
|
|
Required structure:
|
|
- A qcom,qpnp-temp-alarm node must be a child of an SPMI node that has specified
|
|
the spmi-slave-container property
|
|
|
|
Optional properties:
|
|
- qcom,channel-num: VADC channel number associated PMIC DIE_TEMP thermistor.
|
|
If no channel is specified, then the die temperature
|
|
must be estimated based on the over temperature stage.
|
|
- qcom,threshold-set: Integer value which specifies which set of threshold
|
|
temperatures to use for the over temperature stages.
|
|
Possible values (x = {stage 1 threshold temperature,
|
|
stage 2 threshold temperature,
|
|
stage 3 threshold temperature}):
|
|
0 = {105 C, 125 C, 145 C}
|
|
1 = {110 C, 130 C, 150 C}
|
|
2 = {115 C, 135 C, 155 C}
|
|
3 = {120 C, 140 C, 160 C}
|
|
- qcom,allow-override: Boolean which controls the ability of software to
|
|
override shutdowns. If present, then software is
|
|
allowed to override automatic PMIC hardware stage 2 and
|
|
stage 3 over temperature shutdowns. Otherwise, software
|
|
is not allowed to override automatic shutdown.
|
|
- qcom,default-temp: Specifies the default temperature in millicelcius to use
|
|
if no ADC channel is present to read the real time
|
|
temperature.
|
|
- qcom,temp_alarm-vadc: Corresponding VADC device's phandle.
|
|
|
|
Note, if a given optional qcom,* binding is not present, then the default
|
|
hardware state for that feature will be maintained.
|
|
|
|
Example:
|
|
&spmi_bus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
|
|
qcom,pm8941@0 {
|
|
spmi-slave-container;
|
|
reg = <0x0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
qcom,temp-alarm@2400 {
|
|
compatible = "qcom,qpnp-temp-alarm";
|
|
reg = <0x2400 0x100>;
|
|
interrupts = <0x0 0x24 0x0>;
|
|
label = "pm8941_tz";
|
|
qcom,channel-num = <8>;
|
|
qcom,threshold-set = <0>;
|
|
qcom,temp_alarm-vadc = <&pm8941_vadc>;
|
|
};
|
|
};
|
|
};
|