161 lines
4.2 KiB
Plaintext
161 lines
4.2 KiB
Plaintext
Binding for TI/National Semiconductor LP872x Driver
|
|
|
|
Required properties:
|
|
- compatible: "ti,lp8720" or "ti,lp8725"
|
|
- reg: I2C slave address. 0x7d = LP8720, 0x7a = LP8725
|
|
|
|
Optional properties:
|
|
- ti,general-config: the value of LP872X_GENERAL_CFG register (u8)
|
|
(LP8720)
|
|
bit[2]: BUCK output voltage control by external DVS pin or register
|
|
1 = external pin, 0 = bit7 of register 08h
|
|
bit[1]: sleep control by external DVS pin or register
|
|
1 = external pin, 0 = bit6 of register 08h
|
|
bit[0]: time step unit(usec). 1 = 25, 0 = 50
|
|
|
|
(LP8725)
|
|
bit[7:6]: time step unit(usec). 00 = 32, 01 = 64, 10 = 128, 11 = 256
|
|
bit[4]: BUCK2 enable control. 1 = enable, 0 = disable
|
|
bit[3]: BUCK2 output voltage register address. 1 = 0Ah, 0 = 0Bh
|
|
bit[2]: BUCK1 output voltage control by external DVS pin or register
|
|
1 = register 08h, 0 = DVS
|
|
bit[1]: LDO sleep control. 1 = sleep mode, 0 = normal
|
|
bit[0]: BUCK1 enable control, 1 = enable, 0 = disable
|
|
|
|
For more details, please see the datasheet.
|
|
|
|
- ti,update-config: define it when LP872X_GENERAL_CFG register should be set
|
|
- ti,dvs-gpio: GPIO specifier for external DVS pin control of LP872x devices.
|
|
- ti,dvs-vsel: DVS selector. 0 = SEL_V1, 1 = SEL_V2.
|
|
- ti,dvs-state: initial DVS pin state. 0 = DVS_LOW, 1 = DVS_HIGH.
|
|
|
|
Sub nodes for regulator_init_data
|
|
LP8720 has maximum 6 nodes. (child name: ldo1 ~ 5 and buck)
|
|
LP8725 has maximum 9 nodes. (child name: ldo1 ~ 5, lilo1,2 and buck1,2)
|
|
For more details, please see the following binding document.
|
|
(Documentation/devicetree/bindings/regulator/regulator.txt)
|
|
|
|
Datasheet
|
|
- LP8720: http://www.ti.com/lit/ds/symlink/lp8720.pdf
|
|
- LP8725: http://www.ti.com/lit/ds/symlink/lp8725.pdf
|
|
|
|
Example 1) LP8720
|
|
|
|
lp8720@7d {
|
|
compatible = "ti,lp8720";
|
|
reg = <0x7d>;
|
|
|
|
/* external DVS pin used, timestep is 25usec */
|
|
ti,general-config = /bits/ 8 <0x03>;
|
|
ti,update-config;
|
|
|
|
/*
|
|
* The dvs-gpio depends on the processor environment.
|
|
* For example, following GPIO specifier means GPIO134 in OMAP4.
|
|
*/
|
|
ti,dvs-gpio = <&gpio5 6 0>;
|
|
ti,dvs-vsel = /bits/ 8 <1>; /* SEL_V2 */
|
|
ti,dvs-state = /bits/ 8 <1>; /* DVS_HIGH */
|
|
|
|
vaf: ldo1 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
vmmc: ldo2 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
vcam_io: ldo3 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vcam_core: ldo4 {
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <2850000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vcam: ldo5 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
vcc: buck {
|
|
regulator-name = "VBUCK";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <2300000>;
|
|
};
|
|
};
|
|
|
|
Example 2) LP8725
|
|
|
|
lp8725@7a {
|
|
compatible = "ti,lp8725";
|
|
reg = <0x7a>;
|
|
|
|
/* Enable BUCK1,2, no DVS, normal LDO mode, timestep is 256usec */
|
|
ti,general-config = /bits/ 8 <0xdd>;
|
|
ti,update-config;
|
|
|
|
vcam_io: ldo1 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
vcam_core: ldo2 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
vcam: ldo3 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
vcmmb_io: ldo4 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vcmmb_core: ldo5 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vaux1: lilo1 {
|
|
regulator-name = "VAUX1";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
vaux2: lilo2 {
|
|
regulator-name = "VAUX2";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
vcc1: buck1 {
|
|
regulator-name = "VBUCK1";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-min-microamp = <460000>;
|
|
regulator-max-microamp = <1370000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vcc2: buck2 {
|
|
regulator-name = "VBUCK2";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-min-microamp = <460000>;
|
|
regulator-max-microamp = <1370000>;
|
|
regulator-boot-on;
|
|
};
|
|
};
|