26 lines
1.0 KiB
Plaintext
26 lines
1.0 KiB
Plaintext
In Rush Current Mitigation driver:
|
|
|
|
On recent targets, APSS L2 memories are moved to APC domain which were
|
|
earlier on Mx domain. Analysis suggests that on current targets APSS L2
|
|
memories provide reverse capacitance on Mx and this used to provide buffer
|
|
while powering ON Q6 L2. Now due to L2s moving to APC, the cushion is not
|
|
available. So there is a chance of droop when Q6 L2 memories are being
|
|
powered up.
|
|
|
|
During Q6 low power modes L2 is kept in retention only and never collapsed. So
|
|
the cases where it needs to be taken care is during PIL(modem and adsp bringup
|
|
during boot). So in cold boot path before bringing up modem or adsp, turn on MM
|
|
memories. Hence providing a intermediate load.
|
|
|
|
Required properties:
|
|
- compatible: Must be qcom,msm-inrush-current-mitigation
|
|
- qcom,dependent-subsystems: List of subsystems which need the intermediate load
|
|
- vdd-supply: gdsc handle to switch on memory.
|
|
|
|
Example:
|
|
qcom,inrush-current {
|
|
compatible = "qcom,msm-inrush-current-mitigation";
|
|
qcom,dependent-subsystems = "modem", "adsp";
|
|
vdd-supply = <&gdsc_mdss>;
|
|
};
|