109 lines
2.9 KiB
Plaintext
109 lines
2.9 KiB
Plaintext
Marvell Distributed Switch Architecture Device Tree Bindings
|
|
------------------------------------------------------------
|
|
|
|
Required properties:
|
|
- compatible : Should be "marvell,dsa"
|
|
- #address-cells : Must be 2, first cell is the address on the MDIO bus
|
|
and second cell is the address in the switch tree.
|
|
Second cell is used only when cascading/chaining.
|
|
- #size-cells : Must be 0
|
|
- dsa,ethernet : Should be a phandle to a valid Ethernet device node
|
|
- dsa,mii-bus : Should be a phandle to a valid MDIO bus device node
|
|
|
|
Optionnal properties:
|
|
- interrupts : property with a value describing the switch
|
|
interrupt number (not supported by the driver)
|
|
|
|
A DSA node can contain multiple switch chips which are therefore child nodes of
|
|
the parent DSA node. The maximum number of allowed child nodes is 4
|
|
(DSA_MAX_SWITCHES).
|
|
Each of these switch child nodes should have the following required properties:
|
|
|
|
- reg : Describes the switch address on the MII bus
|
|
- #address-cells : Must be 1
|
|
- #size-cells : Must be 0
|
|
|
|
A switch may have multiple "port" children nodes
|
|
|
|
Each port children node must have the following mandatory properties:
|
|
- reg : Describes the port address in the switch
|
|
- label : Describes the label associated with this port, special
|
|
labels are "cpu" to indicate a CPU port and "dsa" to
|
|
indicate an uplink/downlink port.
|
|
|
|
Note that a port labelled "dsa" will imply checking for the uplink phandle
|
|
described below.
|
|
|
|
Optionnal property:
|
|
- link : Should be a phandle to another switch's DSA port.
|
|
This property is only used when switches are being
|
|
chained/cascaded together.
|
|
|
|
- phy-handle : Phandle to a PHY on an external MDIO bus, not the
|
|
switch internal one. See
|
|
Documentation/devicetree/bindings/net/ethernet.txt
|
|
for details.
|
|
|
|
- phy-mode : String representing the connection to the designated
|
|
PHY node specified by the 'phy-handle' property. See
|
|
Documentation/devicetree/bindings/net/ethernet.txt
|
|
for details.
|
|
|
|
Optional subnodes:
|
|
- fixed-link : Fixed-link subnode describing a link to a non-MDIO
|
|
managed entity. See
|
|
Documentation/devicetree/bindings/net/fixed-link.txt
|
|
for details.
|
|
|
|
Example:
|
|
|
|
dsa@0 {
|
|
compatible = "marvell,dsa";
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
|
|
interrupts = <10>;
|
|
dsa,ethernet = <ðernet0>;
|
|
dsa,mii-bus = <&mii_bus0>;
|
|
|
|
switch@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <16 0>; /* MDIO address 16, switch 0 in tree */
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
label = "lan1";
|
|
phy-handle = <&phy0>;
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
label = "lan2";
|
|
};
|
|
|
|
port@5 {
|
|
reg = <5>;
|
|
label = "cpu";
|
|
};
|
|
|
|
switch0uplink: port@6 {
|
|
reg = <6>;
|
|
label = "dsa";
|
|
link = <&switch1uplink>;
|
|
};
|
|
};
|
|
|
|
switch@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <17 1>; /* MDIO address 17, switch 1 in tree */
|
|
|
|
switch1uplink: port@0 {
|
|
reg = <0>;
|
|
label = "dsa";
|
|
link = <&switch0uplink>;
|
|
};
|
|
};
|
|
};
|