107 lines
4.7 KiB
Plaintext
107 lines
4.7 KiB
Plaintext
Synaptics DSX touch controller
|
|
|
|
Required properties:
|
|
|
|
- compatible : should be "synaptics,dsx"
|
|
- reg : i2c slave address of the device
|
|
- interrupt-parent : parent of interrupt
|
|
- interrupts : touch sample interrupt to indicate presense or release
|
|
of fingers on the panel.
|
|
- synaptics,irq-gpio : irq gpio
|
|
- synaptics,reset-gpio : reset gpio
|
|
|
|
Optional property:
|
|
- vdd-supply : digital voltage power supply needed to power device
|
|
- avdd-supply : analog voltage power supply needed to power device
|
|
- synaptics,button-map : virtual key code mappings to be used
|
|
- synaptics,x-flip : modify orientation of the x axis
|
|
- synaptics,y-flip : modify orientation of the y axis
|
|
- synaptics,reset-delay-ms : reset delay for controller (ms), default 100
|
|
- synaptics,panel-coords : touch panel min x, min y, max x and
|
|
max y resolution
|
|
- synaptics,display-coords : display min x, min y, max x and
|
|
max y resolution
|
|
- synaptics,fw-name : name of firmware .img file in /etc/firmware
|
|
- synaptics,disable-gpios : specify this to disable gpios in suspend
|
|
- pinctrl-names : This should be defined if a target uses pinctrl framework.
|
|
See "pinctrl" in Documentation/devicetree/bindings/pinctrl/msm-pinctrl.txt.
|
|
It should specify the names of the configs that pinctrl can install in driver.
|
|
Following are the pinctrl configs that can be installed:
|
|
"pmx_ts_active" : Active configuration of pins, this should specify active
|
|
config defined in pin groups of interrupt and reset gpio.
|
|
"pmx_ts_suspend" : Disabled configuration of pins, this should specify sleep
|
|
config defined in pin groups of interrupt and reset gpio.
|
|
"pmx_ts_release" : Release configuration of pins, this should specify
|
|
release config defined in pin groups of interrupt and reset gpio.
|
|
- synaptics,detect-device : Define this property when two Synaptics Touchscreen controllers
|
|
need to be supported without changing the DT. In this case, all
|
|
such devices are placed as child nodes of Synaptics touchscreen
|
|
node. Following are the properties that can be defined inside
|
|
these child nodes:
|
|
- synaptics-package-id
|
|
- synaptics,panel-coords
|
|
- synaptics-display-coords
|
|
- synaptics,button-map
|
|
- synaptics,key-codes
|
|
- clocks : Optional property that represents the clocks associated
|
|
with the underlying bus when secure touch is enabled. This property
|
|
is required only if secure touch is enabled and used with this driver.
|
|
- clock-names: : Clock names used for secure touch. The names are:
|
|
"iface_clk", "core_clk".
|
|
- synaptics,config-id : Specifies the Config Id of touch controller.
|
|
- synaptics,bypass-packrat-id-check : Specifies if packrat ID needs to be ignored for smart
|
|
firmware upgrade
|
|
|
|
Optional properties inside child node:
|
|
These properties are defined only when synaptics,detect-device property is defined in DT.
|
|
- synaptics,package-id : Specifies the Package Id of touch controller.
|
|
- synaptics,panel-coords : Specifies the Touch panel min x, min y, max x and max y
|
|
resolution.
|
|
- synaptics,display-coords : Specifies the display min x, min y, max x and max y
|
|
resolution.
|
|
- synaptics,button-map : Key code mappings to be used when device
|
|
supports 0D buttons and directly sends key codes.
|
|
- synaptics,key-codes : Virtual key code mappings to be used when device
|
|
supports 2D buttons and sends coordinates instead of
|
|
key codes.
|
|
- synaptics,bypass-sensor-coords-check : Bypass the comparison of sensor coordinates
|
|
range read from DT and touch controller. Used when some
|
|
touch panels in the field are unprogrammed and misprogrammed.
|
|
|
|
Example:
|
|
i2c@f9927000 {
|
|
synaptics@20 {
|
|
compatible = "synaptics,dsx"
|
|
reg = <0x20>;
|
|
interrupt-parent = <&msmgpio>;
|
|
interrupts = <17 0x2>;
|
|
vdd-supply = <&pm8226_l19>;
|
|
avdd-supply = <&pm8226_lvs1>;
|
|
synaptics,reset-gpio = <&msmgpio 16 0x00>;
|
|
synaptics,irq-gpio = <&msmgpio 17 0x00>;
|
|
synaptics,reset-delay-ms = <100>;
|
|
synaptics,x-flip;
|
|
synaptics,y-flip;
|
|
synaptics,disable-gpios;
|
|
synaptics,fw-name = "PR1610974.img";
|
|
pinctrl-names = "pmx_ts_active","pmx_ts_suspend", "pmx_ts_release";
|
|
pinctrl-0 = <&ts_int_active &ts_reset_active>;
|
|
pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
|
|
pinctrl-2 = <&ts_release>;
|
|
synaptics,detect-device;
|
|
synaptics,device1 {
|
|
synaptics,package-id = <3202>;
|
|
synaptics,button-map = <139 172 158>;
|
|
};
|
|
synaptics,device2 {
|
|
synaptics,package-id = <3408>;
|
|
synaptics,display-coords = <0 0 1079 1919>;
|
|
synaptics,panel-coords = <0 0 1079 2084>;
|
|
synaptics,key-codes = <139 172 158 217>;
|
|
};
|
|
clocks = <&clock_gcc clk_gcc_blsp1_ahb_clk>,
|
|
<&clock_gcc clk_gcc_blsp1_qup5_i2c_apps_clk>;
|
|
clock-names = "iface_clk", "core_clk";
|
|
};
|
|
};
|