36 lines
1.0 KiB
Plaintext
36 lines
1.0 KiB
Plaintext
Bosch BMP18x-series altimeter driver
|
|
|
|
Required properties:
|
|
|
|
- compatible : Should be "bosch,bmp180".
|
|
- reg : i2c slave address of the device.
|
|
- vdd-supply : Analog power supply needed to power device.
|
|
- vddio-supply : Digital IO power supply needed for IO and I2C.
|
|
- bosch,chip-id : Chip id for the bmp18x altimeter sensor.
|
|
- bosch,oversample : Sensor default oversampling value.
|
|
Default oversampling value to be used at startup.
|
|
Value range is 0-3 with rising sensitivity.
|
|
- bosch,period : Temperature measurement period (milliseconds).
|
|
Set to zero if unsure.
|
|
|
|
Optional properties:
|
|
|
|
- bosch,sw-oversample : Boolean to enable software oversampling if
|
|
this property is defined. Only take effect when
|
|
default_oversampling is 3.
|
|
|
|
Example:
|
|
i2c@f9925000 {
|
|
bmp180@77 {
|
|
status = "okay";
|
|
reg = <0x77>;
|
|
compatible = "bosch,bmp180";
|
|
vdd-supply = <&pm8110_l19>;
|
|
vddio-supply = <&pm8110_l14>;
|
|
bosch,chip-id = <0x55>;
|
|
bosch,oversample = <3>;
|
|
bosch,period = <1000>;
|
|
bosch,sw-oversample;
|
|
};
|
|
};
|