45 lines
1.6 KiB
Plaintext
45 lines
1.6 KiB
Plaintext
AKM AK09911 3-axis electronic compass driver
|
|
|
|
Required properties:
|
|
|
|
- compatible : Should be "ak,ak09911" or "akm,akm09911".
|
|
- reg : i2c address of the device.
|
|
- pinctrl-names : The pinctrl configration names of this sensor driver. Should be "default","reset".
|
|
- pinctrl-0 : The pinctrl node corresponding to "default", should be <&akm_default>.
|
|
- pinctrl-1 : The pinctrl node corresponding to "reset", should be <&akm_reset>.
|
|
- vdd-supply : Analog power supply needed to power up the device.
|
|
- vio-supply : Digital IO power supply needed for IO and I2C.
|
|
- akm,layout : The layout of the ecompass sensor chip. There are 8
|
|
patterns of layout described as below:
|
|
0: Indicate the invalid pattern, The userspace will decide the pattern.
|
|
1: 1st pin is right down
|
|
2: 1st pin is left down
|
|
3: 1st pin is left top
|
|
4: 1st pin is right top
|
|
5: 1st pin is left down (from top view)
|
|
6: 1st pin is left top (from top view)
|
|
7: 1st pin is right top (from top view)
|
|
8: 1st pin is right down (from top view)
|
|
- akm,gpio_rstn : The gpio pin to reset the sensor chip.
|
|
|
|
Optional properites:
|
|
|
|
- akm,auto-report : Enable auto-report mode.
|
|
- akm,use-hrtimer : Enable the hrtimer mode. The hrtimer will be used as the poling
|
|
delay timer, and high priority workqueue will be used in order to get a more stable polling interval.
|
|
|
|
Example:
|
|
akm@c {
|
|
compatible = "ak,ak09911";
|
|
reg = <0x0c>;
|
|
pinctrl-names = "default","reset";
|
|
pinctrl-0 = <&akm_default>;
|
|
pinctrl-1 = <&akm_reset>;
|
|
vdd-supply = <&pm8110_l19>;
|
|
vio-supply = <&pm8110_l14>;
|
|
akm,layout = <0x0>;
|
|
akm,gpio_rstn = <&msmgpio 82 0x0>;
|
|
akm,auto-report;
|
|
};
|
|
|