56 lines
2.1 KiB
Plaintext
56 lines
2.1 KiB
Plaintext
Qualcomm I2C controller
|
|
|
|
Required properties:
|
|
- reg : Offset and length of the register region for the device named in
|
|
reg-names and has the same index.
|
|
- reg-names : Register region name(s) referenced in reg above
|
|
"qup_phys_addr" : Physical address of QUP register space.
|
|
- compatible : should be "qcom,i2c-msm-v2"
|
|
- interrupts : Interrupt number which correspond to the entry with the same
|
|
index in interrupt-names.
|
|
- interrupt-names: QUP core interrupt name(s) referenced in interrupts above
|
|
"qup_irq" : QUP interrupt used by the controller.
|
|
- dmas : DMA engine API's parameters for blsp.
|
|
<[phandle of the dma controller] [pipe index] [number of descriptors]
|
|
[sps_connect flags] [sps_register_event flags]>;
|
|
- dma-names : dma channel names.
|
|
- qcom,clk-freq-out : Desired I2C bus clock frequency in Hz
|
|
- qcom,clk-freq-in : Supplied core clock frequency in Hz.
|
|
|
|
Required alias:
|
|
- The desired bus-number is specified by an alias with the following format:
|
|
'i2c{n}' where n is the bus number.
|
|
|
|
Optional property:
|
|
- qcom,noise-rjct-scl : number of low samples on clock line to consider it low.
|
|
When missing default to 0.
|
|
- qcom,noise-rjct-sda : number of low samples on data line to consider it low.
|
|
When missing default to 0.
|
|
- qcom,disable-dma : disables DMA transfer mode.
|
|
- qcom,master-id : Master-port value used on voting for the clock path.
|
|
- qcom,high-time-clk-div : high time divider value to configure clk-ctl
|
|
register. When missing, default to the value given in driver.
|
|
- qcom,fs-clk-div: fs divider value to configure clk-ctl register. When
|
|
missing, default to the value given in driver.
|
|
|
|
Example:
|
|
aliases {
|
|
i2c10 = &i2c_10;
|
|
};
|
|
|
|
i2c_10: i2c@f9966000 {
|
|
compatible = "qcom,i2c-msm-v2";
|
|
reg-names = "qup_phys_addr", "dma_phys_addr";
|
|
reg = <0xf9966000 0x1000>;
|
|
interrupt-names = "qup_irq";
|
|
interrupts = <0 104 0>;
|
|
dmas = <&dma_blsp1 14 32 0x20000020 0x20>,
|
|
<&dma_blsp1 15 64 0x20000020 0x20>;
|
|
dma-names = "tx", "rx";
|
|
qcom,clk-freq-out = <100000>;
|
|
qcom,clk-freq-in = <24000000>;
|
|
qcom,noise-rjct-scl = <0>;
|
|
qcom,noise-rjct-sda = <0>;
|
|
|
|
};
|