76 lines
2.2 KiB
Plaintext
76 lines
2.2 KiB
Plaintext
Xilinx AXI VDMA engine, it does transfers between memory and video devices.
|
|
It can be configured to have one channel or two channels. If configured
|
|
as two channels, one is to transmit to the video device and another is
|
|
to receive from the video device.
|
|
|
|
Required properties:
|
|
- compatible: Should be "xlnx,axi-vdma-1.00.a"
|
|
- #dma-cells: Should be <1>, see "dmas" property below
|
|
- reg: Should contain VDMA registers location and length.
|
|
- xlnx,num-fstores: Should be the number of framebuffers as configured in h/w.
|
|
- dma-channel child node: Should have at least one channel and can have up to
|
|
two channels per device. This node specifies the properties of each
|
|
DMA channel (see child node properties below).
|
|
|
|
Optional properties:
|
|
- xlnx,include-sg: Tells configured for Scatter-mode in
|
|
the hardware.
|
|
- xlnx,flush-fsync: Tells which channel to Flush on Frame sync.
|
|
It takes following values:
|
|
{1}, flush both channels
|
|
{2}, flush mm2s channel
|
|
{3}, flush s2mm channel
|
|
|
|
Required child node properties:
|
|
- compatible: It should be either "xlnx,axi-vdma-mm2s-channel" or
|
|
"xlnx,axi-vdma-s2mm-channel".
|
|
- interrupts: Should contain per channel VDMA interrupts.
|
|
- xlnx,data-width: Should contain the stream data width, take values
|
|
{32,64...1024}.
|
|
|
|
Optional child node properties:
|
|
- xlnx,include-dre: Tells hardware is configured for Data
|
|
Realignment Engine.
|
|
- xlnx,genlock-mode: Tells Genlock synchronization is
|
|
enabled/disabled in hardware.
|
|
|
|
Example:
|
|
++++++++
|
|
|
|
axi_vdma_0: axivdma@40030000 {
|
|
compatible = "xlnx,axi-vdma-1.00.a";
|
|
#dma_cells = <1>;
|
|
reg = < 0x40030000 0x10000 >;
|
|
xlnx,num-fstores = <0x8>;
|
|
xlnx,flush-fsync = <0x1>;
|
|
dma-channel@40030000 {
|
|
compatible = "xlnx,axi-vdma-mm2s-channel";
|
|
interrupts = < 0 54 4 >;
|
|
xlnx,datawidth = <0x40>;
|
|
} ;
|
|
dma-channel@40030030 {
|
|
compatible = "xlnx,axi-vdma-s2mm-channel";
|
|
interrupts = < 0 53 4 >;
|
|
xlnx,datawidth = <0x40>;
|
|
} ;
|
|
} ;
|
|
|
|
|
|
* DMA client
|
|
|
|
Required properties:
|
|
- dmas: a list of <[Video DMA device phandle] [Channel ID]> pairs,
|
|
where Channel ID is '0' for write/tx and '1' for read/rx
|
|
channel.
|
|
- dma-names: a list of DMA channel names, one per "dmas" entry
|
|
|
|
Example:
|
|
++++++++
|
|
|
|
vdmatest_0: vdmatest@0 {
|
|
compatible ="xlnx,axi-vdma-test-1.00.a";
|
|
dmas = <&axi_vdma_0 0
|
|
&axi_vdma_0 1>;
|
|
dma-names = "vdma0", "vdma1";
|
|
} ;
|