112 lines
3.6 KiB
Plaintext
112 lines
3.6 KiB
Plaintext
Device Tree Clock bindings for APM X-Gene
|
|
|
|
This binding uses the common clock binding[1].
|
|
|
|
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
|
|
|
|
Required properties:
|
|
- compatible : shall be one of the following:
|
|
"apm,xgene-socpll-clock" - for a X-Gene SoC PLL clock
|
|
"apm,xgene-pcppll-clock" - for a X-Gene PCP PLL clock
|
|
"apm,xgene-device-clock" - for a X-Gene device clock
|
|
|
|
Required properties for SoC or PCP PLL clocks:
|
|
- reg : shall be the physical PLL register address for the pll clock.
|
|
- clocks : shall be the input parent clock phandle for the clock. This should
|
|
be the reference clock.
|
|
- #clock-cells : shall be set to 1.
|
|
- clock-output-names : shall be the name of the PLL referenced by derive
|
|
clock.
|
|
Optional properties for PLL clocks:
|
|
- clock-names : shall be the name of the PLL. If missing, use the device name.
|
|
|
|
Required properties for device clocks:
|
|
- reg : shall be a list of address and length pairs describing the CSR
|
|
reset and/or the divider. Either may be omitted, but at least
|
|
one must be present.
|
|
- reg-names : shall be a string list describing the reg resource. This
|
|
may include "csr-reg" and/or "div-reg". If this property
|
|
is not present, the reg property is assumed to describe
|
|
only "csr-reg".
|
|
- clocks : shall be the input parent clock phandle for the clock.
|
|
- #clock-cells : shall be set to 1.
|
|
- clock-output-names : shall be the name of the device referenced.
|
|
Optional properties for device clocks:
|
|
- clock-names : shall be the name of the device clock. If missing, use the
|
|
device name.
|
|
- csr-offset : Offset to the CSR reset register from the reset address base.
|
|
Default is 0.
|
|
- csr-mask : CSR reset mask bit. Default is 0xF.
|
|
- enable-offset : Offset to the enable register from the reset address base.
|
|
Default is 0x8.
|
|
- enable-mask : CSR enable mask bit. Default is 0xF.
|
|
- divider-offset : Offset to the divider CSR register from the divider base.
|
|
Default is 0x0.
|
|
- divider-width : Width of the divider register. Default is 0.
|
|
- divider-shift : Bit shift of the divider register. Default is 0.
|
|
|
|
For example:
|
|
|
|
pcppll: pcppll@17000100 {
|
|
compatible = "apm,xgene-pcppll-clock";
|
|
#clock-cells = <1>;
|
|
clocks = <&refclk 0>;
|
|
clock-names = "pcppll";
|
|
reg = <0x0 0x17000100 0x0 0x1000>;
|
|
clock-output-names = "pcppll";
|
|
type = <0>;
|
|
};
|
|
|
|
socpll: socpll@17000120 {
|
|
compatible = "apm,xgene-socpll-clock";
|
|
#clock-cells = <1>;
|
|
clocks = <&refclk 0>;
|
|
clock-names = "socpll";
|
|
reg = <0x0 0x17000120 0x0 0x1000>;
|
|
clock-output-names = "socpll";
|
|
type = <1>;
|
|
};
|
|
|
|
qmlclk: qmlclk {
|
|
compatible = "apm,xgene-device-clock";
|
|
#clock-cells = <1>;
|
|
clocks = <&socplldiv2 0>;
|
|
clock-names = "qmlclk";
|
|
reg = <0x0 0x1703C000 0x0 0x1000>;
|
|
reg-name = "csr-reg";
|
|
clock-output-names = "qmlclk";
|
|
};
|
|
|
|
ethclk: ethclk {
|
|
compatible = "apm,xgene-device-clock";
|
|
#clock-cells = <1>;
|
|
clocks = <&socplldiv2 0>;
|
|
clock-names = "ethclk";
|
|
reg = <0x0 0x17000000 0x0 0x1000>;
|
|
reg-names = "div-reg";
|
|
divider-offset = <0x238>;
|
|
divider-width = <0x9>;
|
|
divider-shift = <0x0>;
|
|
clock-output-names = "ethclk";
|
|
};
|
|
|
|
apbclk: apbclk {
|
|
compatible = "apm,xgene-device-clock";
|
|
#clock-cells = <1>;
|
|
clocks = <&ahbclk 0>;
|
|
clock-names = "apbclk";
|
|
reg = <0x0 0x1F2AC000 0x0 0x1000
|
|
0x0 0x1F2AC000 0x0 0x1000>;
|
|
reg-names = "csr-reg", "div-reg";
|
|
csr-offset = <0x0>;
|
|
csr-mask = <0x200>;
|
|
enable-offset = <0x8>;
|
|
enable-mask = <0x200>;
|
|
divider-offset = <0x10>;
|
|
divider-width = <0x2>;
|
|
divider-shift = <0x0>;
|
|
flags = <0x8>;
|
|
clock-output-names = "apbclk";
|
|
};
|
|
|