285 lines
7.6 KiB
C
285 lines
7.6 KiB
C
/*
|
|
* Copyright (c) 2010 Broadcom Corporation
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
|
|
* SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
|
|
* OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
|
|
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
#ifndef _SBCHIPC_H
|
|
#define _SBCHIPC_H
|
|
|
|
#include "defs.h" /* for PAD macro */
|
|
|
|
struct chipcregs {
|
|
u32 chipid; /* 0x0 */
|
|
u32 capabilities;
|
|
u32 corecontrol; /* corerev >= 1 */
|
|
u32 bist;
|
|
|
|
/* OTP */
|
|
u32 otpstatus; /* 0x10, corerev >= 10 */
|
|
u32 otpcontrol;
|
|
u32 otpprog;
|
|
u32 otplayout; /* corerev >= 23 */
|
|
|
|
/* Interrupt control */
|
|
u32 intstatus; /* 0x20 */
|
|
u32 intmask;
|
|
|
|
/* Chip specific regs */
|
|
u32 chipcontrol; /* 0x28, rev >= 11 */
|
|
u32 chipstatus; /* 0x2c, rev >= 11 */
|
|
|
|
/* Jtag Master */
|
|
u32 jtagcmd; /* 0x30, rev >= 10 */
|
|
u32 jtagir;
|
|
u32 jtagdr;
|
|
u32 jtagctrl;
|
|
|
|
/* serial flash interface registers */
|
|
u32 flashcontrol; /* 0x40 */
|
|
u32 flashaddress;
|
|
u32 flashdata;
|
|
u32 PAD[1];
|
|
|
|
/* Silicon backplane configuration broadcast control */
|
|
u32 broadcastaddress; /* 0x50 */
|
|
u32 broadcastdata;
|
|
|
|
/* gpio - cleared only by power-on-reset */
|
|
u32 gpiopullup; /* 0x58, corerev >= 20 */
|
|
u32 gpiopulldown; /* 0x5c, corerev >= 20 */
|
|
u32 gpioin; /* 0x60 */
|
|
u32 gpioout; /* 0x64 */
|
|
u32 gpioouten; /* 0x68 */
|
|
u32 gpiocontrol; /* 0x6C */
|
|
u32 gpiointpolarity; /* 0x70 */
|
|
u32 gpiointmask; /* 0x74 */
|
|
|
|
/* GPIO events corerev >= 11 */
|
|
u32 gpioevent;
|
|
u32 gpioeventintmask;
|
|
|
|
/* Watchdog timer */
|
|
u32 watchdog; /* 0x80 */
|
|
|
|
/* GPIO events corerev >= 11 */
|
|
u32 gpioeventintpolarity;
|
|
|
|
/* GPIO based LED powersave registers corerev >= 16 */
|
|
u32 gpiotimerval; /* 0x88 */
|
|
u32 gpiotimeroutmask;
|
|
|
|
/* clock control */
|
|
u32 clockcontrol_n; /* 0x90 */
|
|
u32 clockcontrol_sb; /* aka m0 */
|
|
u32 clockcontrol_pci; /* aka m1 */
|
|
u32 clockcontrol_m2; /* mii/uart/mipsref */
|
|
u32 clockcontrol_m3; /* cpu */
|
|
u32 clkdiv; /* corerev >= 3 */
|
|
u32 gpiodebugsel; /* corerev >= 28 */
|
|
u32 capabilities_ext; /* 0xac */
|
|
|
|
/* pll delay registers (corerev >= 4) */
|
|
u32 pll_on_delay; /* 0xb0 */
|
|
u32 fref_sel_delay;
|
|
u32 slow_clk_ctl; /* 5 < corerev < 10 */
|
|
u32 PAD;
|
|
|
|
/* Instaclock registers (corerev >= 10) */
|
|
u32 system_clk_ctl; /* 0xc0 */
|
|
u32 clkstatestretch;
|
|
u32 PAD[2];
|
|
|
|
/* Indirect backplane access (corerev >= 22) */
|
|
u32 bp_addrlow; /* 0xd0 */
|
|
u32 bp_addrhigh;
|
|
u32 bp_data;
|
|
u32 PAD;
|
|
u32 bp_indaccess;
|
|
u32 PAD[3];
|
|
|
|
/* More clock dividers (corerev >= 32) */
|
|
u32 clkdiv2;
|
|
u32 PAD[2];
|
|
|
|
/* In AI chips, pointer to erom */
|
|
u32 eromptr; /* 0xfc */
|
|
|
|
/* ExtBus control registers (corerev >= 3) */
|
|
u32 pcmcia_config; /* 0x100 */
|
|
u32 pcmcia_memwait;
|
|
u32 pcmcia_attrwait;
|
|
u32 pcmcia_iowait;
|
|
u32 ide_config;
|
|
u32 ide_memwait;
|
|
u32 ide_attrwait;
|
|
u32 ide_iowait;
|
|
u32 prog_config;
|
|
u32 prog_waitcount;
|
|
u32 flash_config;
|
|
u32 flash_waitcount;
|
|
u32 SECI_config; /* 0x130 SECI configuration */
|
|
u32 PAD[3];
|
|
|
|
/* Enhanced Coexistence Interface (ECI) registers (corerev >= 21) */
|
|
u32 eci_output; /* 0x140 */
|
|
u32 eci_control;
|
|
u32 eci_inputlo;
|
|
u32 eci_inputmi;
|
|
u32 eci_inputhi;
|
|
u32 eci_inputintpolaritylo;
|
|
u32 eci_inputintpolaritymi;
|
|
u32 eci_inputintpolarityhi;
|
|
u32 eci_intmasklo;
|
|
u32 eci_intmaskmi;
|
|
u32 eci_intmaskhi;
|
|
u32 eci_eventlo;
|
|
u32 eci_eventmi;
|
|
u32 eci_eventhi;
|
|
u32 eci_eventmasklo;
|
|
u32 eci_eventmaskmi;
|
|
u32 eci_eventmaskhi;
|
|
u32 PAD[3];
|
|
|
|
/* SROM interface (corerev >= 32) */
|
|
u32 sromcontrol; /* 0x190 */
|
|
u32 sromaddress;
|
|
u32 sromdata;
|
|
u32 PAD[17];
|
|
|
|
/* Clock control and hardware workarounds (corerev >= 20) */
|
|
u32 clk_ctl_st; /* 0x1e0 */
|
|
u32 hw_war;
|
|
u32 PAD[70];
|
|
|
|
/* UARTs */
|
|
u8 uart0data; /* 0x300 */
|
|
u8 uart0imr;
|
|
u8 uart0fcr;
|
|
u8 uart0lcr;
|
|
u8 uart0mcr;
|
|
u8 uart0lsr;
|
|
u8 uart0msr;
|
|
u8 uart0scratch;
|
|
u8 PAD[248]; /* corerev >= 1 */
|
|
|
|
u8 uart1data; /* 0x400 */
|
|
u8 uart1imr;
|
|
u8 uart1fcr;
|
|
u8 uart1lcr;
|
|
u8 uart1mcr;
|
|
u8 uart1lsr;
|
|
u8 uart1msr;
|
|
u8 uart1scratch;
|
|
u32 PAD[126];
|
|
|
|
/* PMU registers (corerev >= 20) */
|
|
u32 pmucontrol; /* 0x600 */
|
|
u32 pmucapabilities;
|
|
u32 pmustatus;
|
|
u32 res_state;
|
|
u32 res_pending;
|
|
u32 pmutimer;
|
|
u32 min_res_mask;
|
|
u32 max_res_mask;
|
|
u32 res_table_sel;
|
|
u32 res_dep_mask;
|
|
u32 res_updn_timer;
|
|
u32 res_timer;
|
|
u32 clkstretch;
|
|
u32 pmuwatchdog;
|
|
u32 gpiosel; /* 0x638, rev >= 1 */
|
|
u32 gpioenable; /* 0x63c, rev >= 1 */
|
|
u32 res_req_timer_sel;
|
|
u32 res_req_timer;
|
|
u32 res_req_mask;
|
|
u32 PAD;
|
|
u32 chipcontrol_addr; /* 0x650 */
|
|
u32 chipcontrol_data; /* 0x654 */
|
|
u32 regcontrol_addr;
|
|
u32 regcontrol_data;
|
|
u32 pllcontrol_addr;
|
|
u32 pllcontrol_data;
|
|
u32 pmustrapopt; /* 0x668, corerev >= 28 */
|
|
u32 pmu_xtalfreq; /* 0x66C, pmurev >= 10 */
|
|
u32 PAD[100];
|
|
u16 sromotp[768];
|
|
};
|
|
|
|
/* chipid */
|
|
#define CID_ID_MASK 0x0000ffff /* Chip Id mask */
|
|
#define CID_REV_MASK 0x000f0000 /* Chip Revision mask */
|
|
#define CID_REV_SHIFT 16 /* Chip Revision shift */
|
|
#define CID_PKG_MASK 0x00f00000 /* Package Option mask */
|
|
#define CID_PKG_SHIFT 20 /* Package Option shift */
|
|
#define CID_CC_MASK 0x0f000000 /* CoreCount (corerev >= 4) */
|
|
#define CID_CC_SHIFT 24
|
|
#define CID_TYPE_MASK 0xf0000000 /* Chip Type */
|
|
#define CID_TYPE_SHIFT 28
|
|
|
|
/* capabilities */
|
|
#define CC_CAP_UARTS_MASK 0x00000003 /* Number of UARTs */
|
|
#define CC_CAP_MIPSEB 0x00000004 /* MIPS is in big-endian mode */
|
|
#define CC_CAP_UCLKSEL 0x00000018 /* UARTs clock select */
|
|
/* UARTs are driven by internal divided clock */
|
|
#define CC_CAP_UINTCLK 0x00000008
|
|
#define CC_CAP_UARTGPIO 0x00000020 /* UARTs own GPIOs 15:12 */
|
|
#define CC_CAP_EXTBUS_MASK 0x000000c0 /* External bus mask */
|
|
#define CC_CAP_EXTBUS_NONE 0x00000000 /* No ExtBus present */
|
|
#define CC_CAP_EXTBUS_FULL 0x00000040 /* ExtBus: PCMCIA, IDE & Prog */
|
|
#define CC_CAP_EXTBUS_PROG 0x00000080 /* ExtBus: ProgIf only */
|
|
#define CC_CAP_FLASH_MASK 0x00000700 /* Type of flash */
|
|
#define CC_CAP_PLL_MASK 0x00038000 /* Type of PLL */
|
|
#define CC_CAP_PWR_CTL 0x00040000 /* Power control */
|
|
#define CC_CAP_OTPSIZE 0x00380000 /* OTP Size (0 = none) */
|
|
#define CC_CAP_OTPSIZE_SHIFT 19 /* OTP Size shift */
|
|
#define CC_CAP_OTPSIZE_BASE 5 /* OTP Size base */
|
|
#define CC_CAP_JTAGP 0x00400000 /* JTAG Master Present */
|
|
#define CC_CAP_ROM 0x00800000 /* Internal boot rom active */
|
|
#define CC_CAP_BKPLN64 0x08000000 /* 64-bit backplane */
|
|
#define CC_CAP_PMU 0x10000000 /* PMU Present, rev >= 20 */
|
|
#define CC_CAP_SROM 0x40000000 /* Srom Present, rev >= 32 */
|
|
/* Nand flash present, rev >= 35 */
|
|
#define CC_CAP_NFLASH 0x80000000
|
|
|
|
#define CC_CAP2_SECI 0x00000001 /* SECI Present, rev >= 36 */
|
|
/* GSIO (spi/i2c) present, rev >= 37 */
|
|
#define CC_CAP2_GSIO 0x00000002
|
|
|
|
/* pmucapabilities */
|
|
#define PCAP_REV_MASK 0x000000ff
|
|
#define PCAP_RC_MASK 0x00001f00
|
|
#define PCAP_RC_SHIFT 8
|
|
#define PCAP_TC_MASK 0x0001e000
|
|
#define PCAP_TC_SHIFT 13
|
|
#define PCAP_PC_MASK 0x001e0000
|
|
#define PCAP_PC_SHIFT 17
|
|
#define PCAP_VC_MASK 0x01e00000
|
|
#define PCAP_VC_SHIFT 21
|
|
#define PCAP_CC_MASK 0x1e000000
|
|
#define PCAP_CC_SHIFT 25
|
|
#define PCAP5_PC_MASK 0x003e0000 /* PMU corerev >= 5 */
|
|
#define PCAP5_PC_SHIFT 17
|
|
#define PCAP5_VC_MASK 0x07c00000
|
|
#define PCAP5_VC_SHIFT 22
|
|
#define PCAP5_CC_MASK 0xf8000000
|
|
#define PCAP5_CC_SHIFT 27
|
|
|
|
/*
|
|
* Maximum delay for the PMU state transition in us.
|
|
* This is an upper bound intended for spinwaits etc.
|
|
*/
|
|
#define PMU_MAX_TRANSITION_DLY 15000
|
|
|
|
#endif /* _SBCHIPC_H */
|