99 lines
2.8 KiB
C
99 lines
2.8 KiB
C
/* Copyright (c) 2012, The Linux Foundation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 and
|
|
* only version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include "msm_fb.h"
|
|
#include "mipi_dsi.h"
|
|
#include "mipi_NT35510.h"
|
|
|
|
static struct msm_panel_info pinfo;
|
|
|
|
static struct mipi_dsi_phy_ctrl dsi_cmd_mode_phy_db = {
|
|
/* DSI Bit Clock at 500 MHz, 2 lane, RGB888 */
|
|
/* regulator */
|
|
{0x03, 0x01, 0x01, 0x00},
|
|
/* timing */
|
|
{0xb9, 0x8e, 0x1f, 0x00, 0x98, 0x9c, 0x22, 0x90,
|
|
0x18, 0x03, 0x04},
|
|
/* phy ctrl */
|
|
{0x7f, 0x00, 0x00, 0x00},
|
|
/* strength */
|
|
{0xbb, 0x02, 0x06, 0x00},
|
|
/* pll control */
|
|
{0x01, 0xec, 0x31, 0xd2, 0x00, 0x40, 0x37, 0x62,
|
|
0x01, 0x0f, 0x07,
|
|
0x05, 0x14, 0x03, 0x0, 0x0, 0x0, 0x20, 0x0, 0x02, 0x0},
|
|
};
|
|
|
|
static int mipi_cmd_nt35510_wvga_pt_init(void)
|
|
{
|
|
int ret;
|
|
|
|
if (msm_fb_detect_client("mipi_cmd_nt35510_wvga"))
|
|
return 0;
|
|
|
|
pinfo.xres = 480;
|
|
pinfo.yres = 800;
|
|
pinfo.type = MIPI_CMD_PANEL;
|
|
pinfo.pdest = DISPLAY_1;
|
|
pinfo.wait_cycle = 0;
|
|
pinfo.bpp = 24;
|
|
pinfo.lcdc.h_back_porch = 100;
|
|
pinfo.lcdc.h_front_porch = 100;
|
|
pinfo.lcdc.h_pulse_width = 8;
|
|
pinfo.lcdc.v_back_porch = 20;
|
|
pinfo.lcdc.v_front_porch = 20;
|
|
pinfo.lcdc.v_pulse_width = 1;
|
|
|
|
pinfo.lcdc.border_clr = 0; /* blk */
|
|
pinfo.lcdc.underflow_clr = 0xff; /* blue */
|
|
pinfo.lcdc.hsync_skew = 0;
|
|
pinfo.bl_max = 255;
|
|
pinfo.bl_min = 1;
|
|
pinfo.fb_num = 2;
|
|
|
|
pinfo.clk_rate = 499000000;
|
|
|
|
pinfo.lcd.vsync_enable = TRUE;
|
|
pinfo.lcd.hw_vsync_mode = TRUE;
|
|
pinfo.lcd.refx100 = 6000; /* adjust refx100 to prevent tearing */
|
|
|
|
pinfo.mipi.mode = DSI_CMD_MODE;
|
|
pinfo.mipi.dst_format = DSI_CMD_DST_FORMAT_RGB888;
|
|
pinfo.mipi.vc = 0;
|
|
pinfo.mipi.rgb_swap = DSI_RGB_SWAP_RGB;
|
|
pinfo.mipi.data_lane0 = TRUE;
|
|
pinfo.mipi.data_lane1 = TRUE;
|
|
pinfo.mipi.t_clk_post = 0x20;
|
|
pinfo.mipi.t_clk_pre = 0x2F;
|
|
pinfo.mipi.stream = 0; /* dma_p */
|
|
pinfo.mipi.mdp_trigger = DSI_CMD_TRIGGER_SW;
|
|
pinfo.mipi.dma_trigger = DSI_CMD_TRIGGER_SW;
|
|
pinfo.mipi.te_sel = 1; /* TE from vsync gpio */
|
|
pinfo.mipi.interleave_max = 1;
|
|
pinfo.mipi.insert_dcs_cmd = TRUE;
|
|
pinfo.mipi.wr_mem_continue = 0x3c;
|
|
pinfo.mipi.wr_mem_start = 0x2c;
|
|
pinfo.mipi.dsi_phy_db = &dsi_cmd_mode_phy_db;
|
|
pinfo.mipi.tx_eot_append = 0x01;
|
|
pinfo.mipi.rx_eot_ignore = 0x0;
|
|
pinfo.mipi.dlane_swap = 0x01;
|
|
|
|
ret = mipi_nt35510_device_register(&pinfo, MIPI_DSI_PRIM,
|
|
MIPI_DSI_PANEL_WVGA_PT);
|
|
if (ret)
|
|
pr_err("%s: failed to register device!\n", __func__);
|
|
|
|
return ret;
|
|
}
|
|
|
|
module_init(mipi_cmd_nt35510_wvga_pt_init);
|