M7350/kernel/arch/arm/mach-msm/board-9615-storage.c
2024-09-09 08:52:07 +00:00

229 lines
6.0 KiB
C

/* Copyright (c) 2011-2012, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/platform_device.h>
#include <asm/mach-types.h>
#include <asm/mach/mmc.h>
#include <mach/msm_bus_board.h>
#include <mach/board.h>
#include <mach/gpiomux.h>
#include "devices.h"
#include "board-9615.h"
#include "board-storage-common-a.h"
#if (defined(CONFIG_MMC_MSM_SDC1_SUPPORT) \
|| defined(CONFIG_MMC_MSM_SDC2_SUPPORT))
#define GPIO_SDC1_HW_DET 80
#define GPIO_SDC2_DAT1_WAKEUP 26
/* MDM9x15 has 2 SDCC controllers */
enum sdcc_controllers {
SDCC1,
SDCC2,
MAX_SDCC_CONTROLLER
};
#ifdef CONFIG_MMC_MSM_SDC1_SUPPORT
/* All SDCC controllers requires VDD/VCC voltage */
static struct msm_mmc_reg_data mmc_vdd_reg_data[MAX_SDCC_CONTROLLER] = {
/* SDCC1 : External card slot connected */
[SDCC1] = {
.name = "sdc_vdd",
/*
* This is a gpio-regulator and does not support
* regulator_set_voltage and regulator_set_optimum_mode
*/
.high_vol_level = 2950000,
.low_vol_level = 2950000,
.hpm_uA = 600000, /* 600mA */
}
};
/* All SDCC controllers may require voting for VDD PAD voltage */
static struct msm_mmc_reg_data mmc_vdd_io_reg_data[MAX_SDCC_CONTROLLER] = {
/* SDCC1 : External card slot connected */
[SDCC1] = {
.name = "sdc_vdd_io",
.high_vol_level = 2950000,
.low_vol_level = 1850000,
.always_on = true,
.lpm_sup = true,
/* Max. Active current required is 16 mA */
.hpm_uA = 16000,
/*
* Sleep current required is ~300 uA. But min. vote can be
* in terms of mA (min. 1 mA). So let's vote for 2 mA
* during sleep.
*/
.lpm_uA = 2000,
}
};
static struct msm_mmc_slot_reg_data mmc_slot_vreg_data[MAX_SDCC_CONTROLLER] = {
/* SDCC1 : External card slot connected */
[SDCC1] = {
.vdd_data = &mmc_vdd_reg_data[SDCC1],
.vdd_io_data = &mmc_vdd_io_reg_data[SDCC1],
}
};
/* SDC1 pad data */
static struct msm_mmc_pad_drv sdc1_pad_drv_on_cfg[] = {
{TLMM_HDRV_SDC1_CLK, GPIO_CFG_16MA},
{TLMM_HDRV_SDC1_CMD, GPIO_CFG_10MA},
{TLMM_HDRV_SDC1_DATA, GPIO_CFG_10MA}
};
static struct msm_mmc_pad_drv sdc1_pad_drv_off_cfg[] = {
{TLMM_HDRV_SDC1_CLK, GPIO_CFG_2MA},
{TLMM_HDRV_SDC1_CMD, GPIO_CFG_2MA},
{TLMM_HDRV_SDC1_DATA, GPIO_CFG_2MA}
};
static struct msm_mmc_pad_pull sdc1_pad_pull_on_cfg[] = {
{TLMM_PULL_SDC1_CLK, GPIO_CFG_NO_PULL},
{TLMM_PULL_SDC1_CMD, GPIO_CFG_PULL_UP},
{TLMM_PULL_SDC1_DATA, GPIO_CFG_PULL_UP}
};
static struct msm_mmc_pad_pull sdc1_pad_pull_off_cfg[] = {
{TLMM_PULL_SDC1_CLK, GPIO_CFG_NO_PULL},
{TLMM_PULL_SDC1_CMD, GPIO_CFG_PULL_DOWN},
{TLMM_PULL_SDC1_DATA, GPIO_CFG_PULL_DOWN}
};
static struct msm_mmc_pad_pull_data mmc_pad_pull_data[MAX_SDCC_CONTROLLER] = {
[SDCC1] = {
.on = sdc1_pad_pull_on_cfg,
.off = sdc1_pad_pull_off_cfg,
.size = ARRAY_SIZE(sdc1_pad_pull_on_cfg)
},
};
static struct msm_mmc_pad_drv_data mmc_pad_drv_data[MAX_SDCC_CONTROLLER] = {
[SDCC1] = {
.on = sdc1_pad_drv_on_cfg,
.off = sdc1_pad_drv_off_cfg,
.size = ARRAY_SIZE(sdc1_pad_drv_on_cfg)
},
};
static struct msm_mmc_pad_data mmc_pad_data[MAX_SDCC_CONTROLLER] = {
[SDCC1] = {
.pull = &mmc_pad_pull_data[SDCC1],
.drv = &mmc_pad_drv_data[SDCC1]
},
};
#endif
#ifdef CONFIG_MMC_MSM_SDC2_SUPPORT
static struct msm_mmc_gpio sdc2_gpio_cfg[] = {
{25, "sdc2_dat_0"},
{26, "sdc2_dat_1"},
{27, "sdc2_dat_2"},
{28, "sdc2_dat_3"},
{29, "sdc2_cmd"},
{30, "sdc2_clk"},
};
static struct msm_mmc_gpio_data mmc_gpio_data[MAX_SDCC_CONTROLLER] = {
[SDCC2] = {
.gpio = sdc2_gpio_cfg,
.size = ARRAY_SIZE(sdc2_gpio_cfg),
},
};
#endif
static struct msm_mmc_pin_data mmc_slot_pin_data[MAX_SDCC_CONTROLLER] = {
#ifdef CONFIG_MMC_MSM_SDC1_SUPPORT
[SDCC1] = {
.is_gpio = 0,
.pad_data = &mmc_pad_data[SDCC1],
},
#endif
#ifdef CONFIG_MMC_MSM_SDC2_SUPPORT
[SDCC2] = {
.is_gpio = 1,
.gpio_data = &mmc_gpio_data[SDCC2],
},
#endif
};
#define MSM_MPM_PIN_SDC1_DAT1 17
#ifdef CONFIG_MMC_MSM_SDC1_SUPPORT
static unsigned int sdc1_sup_clk_rates[] = {
400000, 24000000, 48000000
};
static struct mmc_platform_data sdc1_data = {
.ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29,
.mmc_bus_width = MMC_CAP_4_BIT_DATA,
.sup_clk_table = sdc1_sup_clk_rates,
.sup_clk_cnt = ARRAY_SIZE(sdc1_sup_clk_rates),
.vreg_data = &mmc_slot_vreg_data[SDCC1],
.pin_data = &mmc_slot_pin_data[SDCC1],
.status_gpio = GPIO_SDC1_HW_DET,
.status_irq = MSM_GPIO_TO_INT(GPIO_SDC1_HW_DET),
.irq_flags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
.xpc_cap = 1,
.uhs_caps = (MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 |
MMC_CAP_MAX_CURRENT_400),
.mpm_sdiowakeup_int = MSM_MPM_PIN_SDC1_DAT1,
.msm_bus_voting_data = &sps_to_ddr_bus_voting_data,
};
static struct mmc_platform_data *msm9615_sdc1_pdata = &sdc1_data;
#else
static struct mmc_platform_data *msm9615_sdc1_pdata;
#endif
#ifdef CONFIG_MMC_MSM_SDC2_SUPPORT
static unsigned int sdc2_sup_clk_rates[] = {
400000, 24000000, 48000000
};
static struct mmc_platform_data sdc2_data = {
.ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29,
.mmc_bus_width = MMC_CAP_4_BIT_DATA,
.sup_clk_table = sdc2_sup_clk_rates,
.sup_clk_cnt = ARRAY_SIZE(sdc2_sup_clk_rates),
.pin_data = &mmc_slot_pin_data[SDCC2],
.sdiowakeup_irq = MSM_GPIO_TO_INT(GPIO_SDC2_DAT1_WAKEUP),
.msm_bus_voting_data = &sps_to_ddr_bus_voting_data,
};
static struct mmc_platform_data *msm9615_sdc2_pdata = &sdc2_data;
#else
static struct mmc_platform_data *msm9615_sdc2_pdata;
#endif
void __init msm9615_init_mmc(void)
{
if (msm9615_sdc1_pdata)
/* SDC1: External card slot for SD/MMC cards */
msm_add_sdcc(1, msm9615_sdc1_pdata);
if (msm9615_sdc2_pdata)
/* SDC2: External card slot used for WLAN */
msm_add_sdcc(2, msm9615_sdc2_pdata);
}
#else
void __init msm9615_init_mmc(void)
{
}
#endif