M7350/kernel/arch/arm/mach-msm/acpuclock-krait.c
2024-09-09 08:52:07 +00:00

1205 lines
31 KiB
C

/*
* Copyright (c) 2011-2013, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/err.h>
#include <linux/errno.h>
#include <linux/cpufreq.h>
#include <linux/cpu.h>
#include <linux/regulator/consumer.h>
#include <linux/iopoll.h>
#include <asm/mach-types.h>
#include <asm/cpu.h>
#include <mach/board.h>
#include <mach/msm_iomap.h>
#include <mach/socinfo.h>
#include <mach/msm-krait-l2-accessors.h>
#include <mach/rpm-regulator.h>
#include <mach/rpm-regulator-smd.h>
#include <mach/msm_bus.h>
#include <mach/msm_dcvs.h>
#include "acpuclock.h"
#include "acpuclock-krait.h"
#include "avs.h"
/* MUX source selects. */
#define PRI_SRC_SEL_SEC_SRC 0
#define PRI_SRC_SEL_HFPLL 1
#define PRI_SRC_SEL_HFPLL_DIV2 2
static DEFINE_MUTEX(driver_lock);
static DEFINE_SPINLOCK(l2_lock);
static struct drv_data drv;
static unsigned long acpuclk_krait_get_rate(int cpu)
{
return drv.scalable[cpu].cur_speed->khz;
}
/* Select a source on the primary MUX. */
static void set_pri_clk_src(struct scalable *sc, u32 pri_src_sel)
{
u32 regval;
regval = get_l2_indirect_reg(sc->l2cpmr_iaddr);
regval &= ~0x3;
regval |= (pri_src_sel & 0x3);
set_l2_indirect_reg(sc->l2cpmr_iaddr, regval);
/* Wait for switch to complete. */
mb();
udelay(1);
}
/* Select a source on the secondary MUX. */
static void __cpuinit set_sec_clk_src(struct scalable *sc, u32 sec_src_sel)
{
u32 regval;
regval = get_l2_indirect_reg(sc->l2cpmr_iaddr);
regval &= ~(0x3 << 2);
regval |= ((sec_src_sel & 0x3) << 2);
set_l2_indirect_reg(sc->l2cpmr_iaddr, regval);
/* Wait for switch to complete. */
mb();
udelay(1);
}
static int enable_rpm_vreg(struct vreg *vreg)
{
int ret = 0;
if (vreg->rpm_reg) {
ret = rpm_regulator_enable(vreg->rpm_reg);
if (ret)
dev_err(drv.dev, "%s regulator enable failed (%d)\n",
vreg->name, ret);
}
return ret;
}
static void disable_rpm_vreg(struct vreg *vreg)
{
int rc;
if (vreg->rpm_reg) {
rc = rpm_regulator_disable(vreg->rpm_reg);
if (rc)
dev_err(drv.dev, "%s regulator disable failed (%d)\n",
vreg->name, rc);
}
}
/* Enable an already-configured HFPLL. */
static void hfpll_enable(struct scalable *sc, bool skip_regulators)
{
if (!skip_regulators) {
/* Enable regulators required by the HFPLL. */
enable_rpm_vreg(&sc->vreg[VREG_HFPLL_A]);
enable_rpm_vreg(&sc->vreg[VREG_HFPLL_B]);
}
/* Disable PLL bypass mode. */
writel_relaxed(0x2, sc->hfpll_base + drv.hfpll_data->mode_offset);
/*
* H/W requires a 5us delay between disabling the bypass and
* de-asserting the reset. Delay 10us just to be safe.
*/
mb();
udelay(10);
/* De-assert active-low PLL reset. */
writel_relaxed(0x6, sc->hfpll_base + drv.hfpll_data->mode_offset);
/* Wait for PLL to lock. */
if (drv.hfpll_data->has_lock_status) {
u32 regval;
readl_tight_poll(sc->hfpll_base + drv.hfpll_data->status_offset,
regval, regval & BIT(16));
} else {
mb();
udelay(60);
}
/* Enable PLL output. */
writel_relaxed(0x7, sc->hfpll_base + drv.hfpll_data->mode_offset);
}
/* Disable a HFPLL for power-savings or while it's being reprogrammed. */
static void hfpll_disable(struct scalable *sc, bool skip_regulators)
{
/*
* Disable the PLL output, disable test mode, enable the bypass mode,
* and assert the reset.
*/
writel_relaxed(0, sc->hfpll_base + drv.hfpll_data->mode_offset);
if (!skip_regulators) {
/* Remove voltage votes required by the HFPLL. */
disable_rpm_vreg(&sc->vreg[VREG_HFPLL_B]);
disable_rpm_vreg(&sc->vreg[VREG_HFPLL_A]);
}
}
/* Program the HFPLL rate. Assumes HFPLL is already disabled. */
static void hfpll_set_rate(struct scalable *sc, const struct core_speed *tgt_s)
{
void __iomem *base = sc->hfpll_base;
u32 regval;
writel_relaxed(tgt_s->pll_l_val, base + drv.hfpll_data->l_offset);
if (drv.hfpll_data->has_user_reg) {
regval = readl_relaxed(base + drv.hfpll_data->user_offset);
if (tgt_s->pll_l_val <= drv.hfpll_data->low_vco_l_max)
regval &= ~drv.hfpll_data->user_vco_mask;
else
regval |= drv.hfpll_data->user_vco_mask;
writel_relaxed(regval, base + drv.hfpll_data->user_offset);
}
}
/* Return the L2 speed that should be applied. */
static unsigned int compute_l2_level(struct scalable *sc, unsigned int vote_l)
{
unsigned int new_l = 0;
int cpu;
/* Find max L2 speed vote. */
sc->l2_vote = vote_l;
for_each_present_cpu(cpu)
new_l = max(new_l, drv.scalable[cpu].l2_vote);
return new_l;
}
/* Update the bus bandwidth request. */
static void set_bus_bw(unsigned int bw)
{
int ret;
/* Update bandwidth if request has changed. This may sleep. */
ret = msm_bus_scale_client_update_request(drv.bus_perf_client, bw);
if (ret)
dev_err(drv.dev, "bandwidth request failed (%d)\n", ret);
}
/* Set the CPU or L2 clock speed. */
static void set_speed(struct scalable *sc, const struct core_speed *tgt_s,
bool skip_regulators)
{
const struct core_speed *strt_s = sc->cur_speed;
if (strt_s == tgt_s)
return;
if (strt_s->src == HFPLL && tgt_s->src == HFPLL) {
/*
* Move to an always-on source running at a frequency
* that does not require an elevated CPU voltage.
*/
set_pri_clk_src(sc, PRI_SRC_SEL_SEC_SRC);
/* Re-program HFPLL. */
hfpll_disable(sc, true);
hfpll_set_rate(sc, tgt_s);
hfpll_enable(sc, true);
/* Move to HFPLL. */
set_pri_clk_src(sc, tgt_s->pri_src_sel);
} else if (strt_s->src == HFPLL && tgt_s->src != HFPLL) {
set_pri_clk_src(sc, tgt_s->pri_src_sel);
hfpll_disable(sc, skip_regulators);
} else if (strt_s->src != HFPLL && tgt_s->src == HFPLL) {
hfpll_set_rate(sc, tgt_s);
hfpll_enable(sc, skip_regulators);
set_pri_clk_src(sc, tgt_s->pri_src_sel);
}
sc->cur_speed = tgt_s;
}
struct vdd_data {
int vdd_mem;
int vdd_dig;
int vdd_core;
int ua_core;
};
/* Apply any per-cpu voltage increases. */
static int increase_vdd(int cpu, struct vdd_data *data,
enum setrate_reason reason)
{
struct scalable *sc = &drv.scalable[cpu];
int rc;
/*
* Increase vdd_mem active-set before vdd_dig.
* vdd_mem should be >= vdd_dig.
*/
if (data->vdd_mem > sc->vreg[VREG_MEM].cur_vdd) {
rc = rpm_regulator_set_voltage(sc->vreg[VREG_MEM].rpm_reg,
data->vdd_mem, sc->vreg[VREG_MEM].max_vdd);
if (rc) {
dev_err(drv.dev,
"vdd_mem (cpu%d) increase failed (%d)\n",
cpu, rc);
return rc;
}
sc->vreg[VREG_MEM].cur_vdd = data->vdd_mem;
}
/* Increase vdd_dig active-set vote. */
if (data->vdd_dig > sc->vreg[VREG_DIG].cur_vdd) {
rc = rpm_regulator_set_voltage(sc->vreg[VREG_DIG].rpm_reg,
data->vdd_dig, sc->vreg[VREG_DIG].max_vdd);
if (rc) {
dev_err(drv.dev,
"vdd_dig (cpu%d) increase failed (%d)\n",
cpu, rc);
return rc;
}
sc->vreg[VREG_DIG].cur_vdd = data->vdd_dig;
}
/* Increase current request. */
if (data->ua_core > sc->vreg[VREG_CORE].cur_ua) {
rc = regulator_set_optimum_mode(sc->vreg[VREG_CORE].reg,
data->ua_core);
if (rc < 0) {
dev_err(drv.dev, "regulator_set_optimum_mode(%s) failed (%d)\n",
sc->vreg[VREG_CORE].name, rc);
return rc;
}
sc->vreg[VREG_CORE].cur_ua = data->ua_core;
}
/*
* Update per-CPU core voltage. Don't do this for the hotplug path for
* which it should already be correct. Attempting to set it is bad
* because we don't know what CPU we are running on at this point, but
* the CPU regulator API requires we call it from the affected CPU.
*/
if (data->vdd_core > sc->vreg[VREG_CORE].cur_vdd
&& reason != SETRATE_HOTPLUG) {
rc = regulator_set_voltage(sc->vreg[VREG_CORE].reg,
data->vdd_core, sc->vreg[VREG_CORE].max_vdd);
if (rc) {
dev_err(drv.dev,
"vdd_core (cpu%d) increase failed (%d)\n",
cpu, rc);
return rc;
}
sc->vreg[VREG_CORE].cur_vdd = data->vdd_core;
}
return 0;
}
/* Apply any per-cpu voltage decreases. */
static void decrease_vdd(int cpu, struct vdd_data *data,
enum setrate_reason reason)
{
struct scalable *sc = &drv.scalable[cpu];
int ret;
/*
* Update per-CPU core voltage. This must be called on the CPU
* that's being affected. Don't do this in the hotplug remove path,
* where the rail is off and we're executing on the other CPU.
*/
if (data->vdd_core < sc->vreg[VREG_CORE].cur_vdd
&& reason != SETRATE_HOTPLUG) {
ret = regulator_set_voltage(sc->vreg[VREG_CORE].reg,
data->vdd_core, sc->vreg[VREG_CORE].max_vdd);
if (ret) {
dev_err(drv.dev,
"vdd_core (cpu%d) decrease failed (%d)\n",
cpu, ret);
return;
}
sc->vreg[VREG_CORE].cur_vdd = data->vdd_core;
}
/* Decrease current request. */
if (data->ua_core < sc->vreg[VREG_CORE].cur_ua) {
ret = regulator_set_optimum_mode(sc->vreg[VREG_CORE].reg,
data->ua_core);
if (ret < 0) {
dev_err(drv.dev, "regulator_set_optimum_mode(%s) failed (%d)\n",
sc->vreg[VREG_CORE].name, ret);
return;
}
sc->vreg[VREG_CORE].cur_ua = data->ua_core;
}
/* Decrease vdd_dig active-set vote. */
if (data->vdd_dig < sc->vreg[VREG_DIG].cur_vdd) {
ret = rpm_regulator_set_voltage(sc->vreg[VREG_DIG].rpm_reg,
data->vdd_dig, sc->vreg[VREG_DIG].max_vdd);
if (ret) {
dev_err(drv.dev,
"vdd_dig (cpu%d) decrease failed (%d)\n",
cpu, ret);
return;
}
sc->vreg[VREG_DIG].cur_vdd = data->vdd_dig;
}
/*
* Decrease vdd_mem active-set after vdd_dig.
* vdd_mem should be >= vdd_dig.
*/
if (data->vdd_mem < sc->vreg[VREG_MEM].cur_vdd) {
ret = rpm_regulator_set_voltage(sc->vreg[VREG_MEM].rpm_reg,
data->vdd_mem, sc->vreg[VREG_MEM].max_vdd);
if (ret) {
dev_err(drv.dev,
"vdd_mem (cpu%d) decrease failed (%d)\n",
cpu, ret);
return;
}
sc->vreg[VREG_MEM].cur_vdd = data->vdd_mem;
}
}
static int calculate_vdd_mem(const struct acpu_level *tgt)
{
return drv.l2_freq_tbl[tgt->l2_level].vdd_mem;
}
static int get_src_dig(const struct core_speed *s)
{
const int *hfpll_vdd = drv.hfpll_data->vdd;
const u32 low_vdd_l_max = drv.hfpll_data->low_vdd_l_max;
const u32 nom_vdd_l_max = drv.hfpll_data->nom_vdd_l_max;
if (s->src != HFPLL)
return hfpll_vdd[HFPLL_VDD_NONE];
else if (s->pll_l_val > nom_vdd_l_max)
return hfpll_vdd[HFPLL_VDD_HIGH];
else if (s->pll_l_val > low_vdd_l_max)
return hfpll_vdd[HFPLL_VDD_NOM];
else
return hfpll_vdd[HFPLL_VDD_LOW];
}
static int calculate_vdd_dig(const struct acpu_level *tgt)
{
int l2_pll_vdd_dig, cpu_pll_vdd_dig;
l2_pll_vdd_dig = get_src_dig(&drv.l2_freq_tbl[tgt->l2_level].speed);
cpu_pll_vdd_dig = get_src_dig(&tgt->speed);
return max(drv.l2_freq_tbl[tgt->l2_level].vdd_dig,
max(l2_pll_vdd_dig, cpu_pll_vdd_dig));
}
static bool enable_boost = true;
module_param_named(boost, enable_boost, bool, S_IRUGO | S_IWUSR);
static int calculate_vdd_core(const struct acpu_level *tgt)
{
return tgt->vdd_core + (enable_boost ? drv.boost_uv : 0);
}
static DEFINE_MUTEX(l2_regulator_lock);
static int l2_vreg_count;
static int enable_l2_regulators(void)
{
int ret = 0;
mutex_lock(&l2_regulator_lock);
if (l2_vreg_count == 0) {
ret = enable_rpm_vreg(&drv.scalable[L2].vreg[VREG_HFPLL_A]);
if (ret)
goto out;
ret = enable_rpm_vreg(&drv.scalable[L2].vreg[VREG_HFPLL_B]);
if (ret) {
disable_rpm_vreg(&drv.scalable[L2].vreg[VREG_HFPLL_A]);
goto out;
}
}
l2_vreg_count++;
out:
mutex_unlock(&l2_regulator_lock);
return ret;
}
static void disable_l2_regulators(void)
{
mutex_lock(&l2_regulator_lock);
if (WARN(!l2_vreg_count, "L2 regulator votes are unbalanced!"))
goto out;
if (l2_vreg_count == 1) {
disable_rpm_vreg(&drv.scalable[L2].vreg[VREG_HFPLL_B]);
disable_rpm_vreg(&drv.scalable[L2].vreg[VREG_HFPLL_A]);
}
l2_vreg_count--;
out:
mutex_unlock(&l2_regulator_lock);
}
/* Set the CPU's clock rate and adjust the L2 rate, voltage and BW requests. */
static int acpuclk_krait_set_rate(int cpu, unsigned long rate,
enum setrate_reason reason)
{
const struct core_speed *strt_acpu_s, *tgt_acpu_s;
const struct acpu_level *tgt;
int tgt_l2_l;
enum src_id prev_l2_src = NUM_SRC_ID;
struct vdd_data vdd_data;
bool skip_regulators;
int rc = 0;
if (cpu > num_possible_cpus())
return -EINVAL;
if (reason == SETRATE_CPUFREQ || reason == SETRATE_HOTPLUG)
mutex_lock(&driver_lock);
strt_acpu_s = drv.scalable[cpu].cur_speed;
/* Return early if rate didn't change. */
if (rate == strt_acpu_s->khz)
goto out;
/* Find target frequency. */
for (tgt = drv.acpu_freq_tbl; tgt->speed.khz != 0; tgt++) {
if (tgt->speed.khz == rate) {
tgt_acpu_s = &tgt->speed;
break;
}
}
if (tgt->speed.khz == 0) {
rc = -EINVAL;
goto out;
}
/* Calculate voltage requirements for the current CPU. */
vdd_data.vdd_mem = calculate_vdd_mem(tgt);
vdd_data.vdd_dig = calculate_vdd_dig(tgt);
vdd_data.vdd_core = calculate_vdd_core(tgt);
vdd_data.ua_core = tgt->ua_core;
/* Disable AVS before voltage switch */
if (reason == SETRATE_CPUFREQ && drv.scalable[cpu].avs_enabled) {
AVS_DISABLE(cpu);
drv.scalable[cpu].avs_enabled = false;
}
/* Increase VDD levels if needed. */
if (reason == SETRATE_CPUFREQ || reason == SETRATE_HOTPLUG) {
rc = increase_vdd(cpu, &vdd_data, reason);
if (rc)
goto out;
prev_l2_src =
drv.l2_freq_tbl[drv.scalable[cpu].l2_vote].speed.src;
/* Vote for the L2 regulators here if necessary. */
if (drv.l2_freq_tbl[tgt->l2_level].speed.src == HFPLL) {
rc = enable_l2_regulators();
if (rc)
goto out;
}
}
dev_dbg(drv.dev, "Switching from ACPU%d rate %lu KHz -> %lu KHz\n",
cpu, strt_acpu_s->khz, tgt_acpu_s->khz);
/*
* If we are setting the rate as part of power collapse or in the resume
* path after power collapse, skip the vote for the HFPLL regulators,
* which are active-set-only votes that will be removed when apps enters
* its sleep set. This is needed to avoid voting for regulators with
* sleeping APIs from an atomic context.
*/
skip_regulators = (reason == SETRATE_PC);
/* Set the new CPU speed. */
set_speed(&drv.scalable[cpu], tgt_acpu_s, skip_regulators);
/*
* Update the L2 vote and apply the rate change. A spinlock is
* necessary to ensure L2 rate is calculated and set atomically
* with the CPU frequency, even if acpuclk_krait_set_rate() is
* called from an atomic context and the driver_lock mutex is not
* acquired.
*/
spin_lock(&l2_lock);
tgt_l2_l = compute_l2_level(&drv.scalable[cpu], tgt->l2_level);
set_speed(&drv.scalable[L2],
&drv.l2_freq_tbl[tgt_l2_l].speed, true);
spin_unlock(&l2_lock);
/* Nothing else to do for power collapse or SWFI. */
if (reason == SETRATE_PC || reason == SETRATE_SWFI)
goto out;
/*
* Remove the vote for the L2 HFPLL regulators only if the L2
* was already on an HFPLL source.
*/
if (prev_l2_src == HFPLL)
disable_l2_regulators();
/* Update bus bandwith request. */
set_bus_bw(drv.l2_freq_tbl[tgt_l2_l].bw_level);
/* Drop VDD levels if we can. */
decrease_vdd(cpu, &vdd_data, reason);
/* Re-enable AVS */
if (reason == SETRATE_CPUFREQ && tgt->avsdscr_setting) {
AVS_ENABLE(cpu, tgt->avsdscr_setting);
drv.scalable[cpu].avs_enabled = true;
}
dev_dbg(drv.dev, "ACPU%d speed change complete\n", cpu);
out:
if (reason == SETRATE_CPUFREQ || reason == SETRATE_HOTPLUG)
mutex_unlock(&driver_lock);
return rc;
}
static struct acpuclk_data acpuclk_krait_data = {
.set_rate = acpuclk_krait_set_rate,
.get_rate = acpuclk_krait_get_rate,
};
/* Initialize a HFPLL at a given rate and enable it. */
static void __cpuinit hfpll_init(struct scalable *sc,
const struct core_speed *tgt_s)
{
dev_dbg(drv.dev, "Initializing HFPLL%d\n", sc - drv.scalable);
/* Disable the PLL for re-programming. */
hfpll_disable(sc, true);
/* Configure PLL parameters for integer mode. */
writel_relaxed(drv.hfpll_data->config_val,
sc->hfpll_base + drv.hfpll_data->config_offset);
writel_relaxed(0, sc->hfpll_base + drv.hfpll_data->m_offset);
writel_relaxed(1, sc->hfpll_base + drv.hfpll_data->n_offset);
if (drv.hfpll_data->has_user_reg)
writel_relaxed(drv.hfpll_data->user_val,
sc->hfpll_base + drv.hfpll_data->user_offset);
/* Program droop controller, if supported */
if (drv.hfpll_data->has_droop_ctl)
writel_relaxed(drv.hfpll_data->droop_val,
sc->hfpll_base + drv.hfpll_data->droop_offset);
/* Set an initial PLL rate. */
hfpll_set_rate(sc, tgt_s);
}
static int __cpuinit rpm_regulator_init(struct scalable *sc, enum vregs vreg,
int vdd, bool enable)
{
int ret;
if (!sc->vreg[vreg].name)
return 0;
sc->vreg[vreg].rpm_reg = rpm_regulator_get(drv.dev,
sc->vreg[vreg].name);
if (IS_ERR(sc->vreg[vreg].rpm_reg)) {
ret = PTR_ERR(sc->vreg[vreg].rpm_reg);
dev_err(drv.dev, "rpm_regulator_get(%s) failed (%d)\n",
sc->vreg[vreg].name, ret);
goto err_get;
}
ret = rpm_regulator_set_voltage(sc->vreg[vreg].rpm_reg, vdd,
sc->vreg[vreg].max_vdd);
if (ret) {
dev_err(drv.dev, "%s initialization failed (%d)\n",
sc->vreg[vreg].name, ret);
goto err_conf;
}
sc->vreg[vreg].cur_vdd = vdd;
if (enable) {
ret = enable_rpm_vreg(&sc->vreg[vreg]);
if (ret)
goto err_conf;
}
return 0;
err_conf:
rpm_regulator_put(sc->vreg[vreg].rpm_reg);
err_get:
return ret;
}
static void __cpuinit rpm_regulator_cleanup(struct scalable *sc,
enum vregs vreg)
{
if (!sc->vreg[vreg].rpm_reg)
return;
disable_rpm_vreg(&sc->vreg[vreg]);
rpm_regulator_put(sc->vreg[vreg].rpm_reg);
}
/* Voltage regulator initialization. */
static int __cpuinit regulator_init(struct scalable *sc,
const struct acpu_level *acpu_level)
{
int ret, vdd_mem, vdd_dig, vdd_core;
vdd_mem = calculate_vdd_mem(acpu_level);
ret = rpm_regulator_init(sc, VREG_MEM, vdd_mem, true);
if (ret)
goto err_mem;
vdd_dig = calculate_vdd_dig(acpu_level);
ret = rpm_regulator_init(sc, VREG_DIG, vdd_dig, true);
if (ret)
goto err_dig;
ret = rpm_regulator_init(sc, VREG_HFPLL_A,
sc->vreg[VREG_HFPLL_A].max_vdd, false);
if (ret)
goto err_hfpll_a;
ret = rpm_regulator_init(sc, VREG_HFPLL_B,
sc->vreg[VREG_HFPLL_B].max_vdd, false);
if (ret)
goto err_hfpll_b;
/* Setup Krait CPU regulators and initial core voltage. */
sc->vreg[VREG_CORE].reg = regulator_get(drv.dev,
sc->vreg[VREG_CORE].name);
if (IS_ERR(sc->vreg[VREG_CORE].reg)) {
ret = PTR_ERR(sc->vreg[VREG_CORE].reg);
dev_err(drv.dev, "regulator_get(%s) failed (%d)\n",
sc->vreg[VREG_CORE].name, ret);
goto err_core_get;
}
ret = regulator_set_optimum_mode(sc->vreg[VREG_CORE].reg,
acpu_level->ua_core);
if (ret < 0) {
dev_err(drv.dev, "regulator_set_optimum_mode(%s) failed (%d)\n",
sc->vreg[VREG_CORE].name, ret);
goto err_core_conf;
}
sc->vreg[VREG_CORE].cur_ua = acpu_level->ua_core;
vdd_core = calculate_vdd_core(acpu_level);
ret = regulator_set_voltage(sc->vreg[VREG_CORE].reg, vdd_core,
sc->vreg[VREG_CORE].max_vdd);
if (ret) {
dev_err(drv.dev, "regulator_set_voltage(%s) (%d)\n",
sc->vreg[VREG_CORE].name, ret);
goto err_core_conf;
}
sc->vreg[VREG_CORE].cur_vdd = vdd_core;
ret = regulator_enable(sc->vreg[VREG_CORE].reg);
if (ret) {
dev_err(drv.dev, "regulator_enable(%s) failed (%d)\n",
sc->vreg[VREG_CORE].name, ret);
goto err_core_conf;
}
/*
* Increment the L2 HFPLL regulator refcount if _this_ CPU's frequency
* requires a corresponding target L2 frequency that needs the L2 to
* run off of an HFPLL.
*/
if (drv.l2_freq_tbl[acpu_level->l2_level].speed.src == HFPLL)
l2_vreg_count++;
return 0;
err_core_conf:
regulator_put(sc->vreg[VREG_CORE].reg);
err_core_get:
rpm_regulator_cleanup(sc, VREG_HFPLL_B);
err_hfpll_b:
rpm_regulator_cleanup(sc, VREG_HFPLL_A);
err_hfpll_a:
rpm_regulator_cleanup(sc, VREG_DIG);
err_dig:
rpm_regulator_cleanup(sc, VREG_MEM);
err_mem:
return ret;
}
static void __cpuinit regulator_cleanup(struct scalable *sc)
{
regulator_disable(sc->vreg[VREG_CORE].reg);
regulator_put(sc->vreg[VREG_CORE].reg);
rpm_regulator_cleanup(sc, VREG_HFPLL_B);
rpm_regulator_cleanup(sc, VREG_HFPLL_A);
rpm_regulator_cleanup(sc, VREG_DIG);
rpm_regulator_cleanup(sc, VREG_MEM);
}
/* Set initial rate for a given core. */
static int __cpuinit init_clock_sources(struct scalable *sc,
const struct core_speed *tgt_s)
{
u32 regval;
void __iomem *aux_reg;
/* Program AUX source input to the secondary MUX. */
if (sc->aux_clk_sel_phys) {
aux_reg = ioremap(sc->aux_clk_sel_phys, 4);
if (!aux_reg)
return -ENOMEM;
writel_relaxed(sc->aux_clk_sel, aux_reg);
iounmap(aux_reg);
}
/* Switch away from the HFPLL while it's re-initialized. */
set_sec_clk_src(sc, sc->sec_clk_sel);
set_pri_clk_src(sc, PRI_SRC_SEL_SEC_SRC);
hfpll_init(sc, tgt_s);
/* Set PRI_SRC_SEL_HFPLL_DIV2 divider to div-2. */
regval = get_l2_indirect_reg(sc->l2cpmr_iaddr);
regval &= ~(0x3 << 6);
set_l2_indirect_reg(sc->l2cpmr_iaddr, regval);
/* Enable and switch to the target clock source. */
if (tgt_s->src == HFPLL)
hfpll_enable(sc, false);
set_pri_clk_src(sc, tgt_s->pri_src_sel);
sc->cur_speed = tgt_s;
return 0;
}
static void __cpuinit fill_cur_core_speed(struct core_speed *s,
struct scalable *sc)
{
s->pri_src_sel = get_l2_indirect_reg(sc->l2cpmr_iaddr) & 0x3;
s->pll_l_val = readl_relaxed(sc->hfpll_base + drv.hfpll_data->l_offset);
}
static bool __cpuinit speed_equal(const struct core_speed *s1,
const struct core_speed *s2)
{
return (s1->pri_src_sel == s2->pri_src_sel &&
s1->pll_l_val == s2->pll_l_val);
}
static const struct acpu_level __cpuinit *find_cur_acpu_level(int cpu)
{
struct scalable *sc = &drv.scalable[cpu];
const struct acpu_level *l;
struct core_speed cur_speed;
fill_cur_core_speed(&cur_speed, sc);
for (l = drv.acpu_freq_tbl; l->speed.khz != 0; l++)
if (speed_equal(&l->speed, &cur_speed))
return l;
return NULL;
}
static const struct l2_level __init *find_cur_l2_level(void)
{
struct scalable *sc = &drv.scalable[L2];
const struct l2_level *l;
struct core_speed cur_speed;
fill_cur_core_speed(&cur_speed, sc);
for (l = drv.l2_freq_tbl; l->speed.khz != 0; l++)
if (speed_equal(&l->speed, &cur_speed))
return l;
return NULL;
}
static const struct acpu_level __cpuinit *find_min_acpu_level(void)
{
struct acpu_level *l;
for (l = drv.acpu_freq_tbl; l->speed.khz != 0; l++)
if (l->use_for_scaling)
return l;
return NULL;
}
static int __cpuinit per_cpu_init(int cpu)
{
struct scalable *sc = &drv.scalable[cpu];
const struct acpu_level *acpu_level;
int ret;
sc->hfpll_base = ioremap(sc->hfpll_phys_base, SZ_32);
if (!sc->hfpll_base) {
ret = -ENOMEM;
goto err_ioremap;
}
acpu_level = find_cur_acpu_level(cpu);
if (!acpu_level) {
acpu_level = find_min_acpu_level();
if (!acpu_level) {
ret = -ENODEV;
goto err_table;
}
dev_dbg(drv.dev, "CPU%d is running at an unknown rate. Defaulting to %lu KHz.\n",
cpu, acpu_level->speed.khz);
} else {
dev_dbg(drv.dev, "CPU%d is running at %lu KHz\n", cpu,
acpu_level->speed.khz);
}
ret = regulator_init(sc, acpu_level);
if (ret)
goto err_regulators;
ret = init_clock_sources(sc, &acpu_level->speed);
if (ret)
goto err_clocks;
sc->l2_vote = acpu_level->l2_level;
sc->initialized = true;
return 0;
err_clocks:
regulator_cleanup(sc);
err_regulators:
err_table:
iounmap(sc->hfpll_base);
err_ioremap:
return ret;
}
/* Register with bus driver. */
static void __init bus_init(const struct l2_level *l2_level)
{
int ret;
drv.bus_perf_client = msm_bus_scale_register_client(drv.bus_scale);
if (!drv.bus_perf_client) {
dev_err(drv.dev, "unable to register bus client\n");
BUG();
}
ret = msm_bus_scale_client_update_request(drv.bus_perf_client,
l2_level->bw_level);
if (ret)
dev_err(drv.dev, "initial bandwidth req failed (%d)\n", ret);
}
#ifdef CONFIG_CPU_FREQ_MSM
static struct cpufreq_frequency_table freq_table[NR_CPUS][35];
static void __init cpufreq_table_init(void)
{
int cpu;
int freq_cnt = 0;
for_each_possible_cpu(cpu) {
int i;
/* Construct the freq_table tables from acpu_freq_tbl. */
for (i = 0, freq_cnt = 0; drv.acpu_freq_tbl[i].speed.khz != 0
&& freq_cnt < ARRAY_SIZE(*freq_table); i++) {
if (drv.acpu_freq_tbl[i].use_for_scaling) {
freq_table[cpu][freq_cnt].index = freq_cnt;
freq_table[cpu][freq_cnt].frequency
= drv.acpu_freq_tbl[i].speed.khz;
freq_cnt++;
}
}
/* freq_table not big enough to store all usable freqs. */
BUG_ON(drv.acpu_freq_tbl[i].speed.khz != 0);
freq_table[cpu][freq_cnt].index = freq_cnt;
freq_table[cpu][freq_cnt].frequency = CPUFREQ_TABLE_END;
/* Register table with CPUFreq. */
cpufreq_frequency_table_get_attr(freq_table[cpu], cpu);
}
dev_info(drv.dev, "CPU Frequencies Supported: %d\n", freq_cnt);
}
#else
static void __init cpufreq_table_init(void) {}
#endif
static void __init dcvs_freq_init(void)
{
int i;
for (i = 0; drv.acpu_freq_tbl[i].speed.khz != 0; i++)
if (drv.acpu_freq_tbl[i].use_for_scaling)
msm_dcvs_register_cpu_freq(
drv.acpu_freq_tbl[i].speed.khz,
drv.acpu_freq_tbl[i].vdd_core / 1000);
}
static int __cpuinit acpuclk_cpu_callback(struct notifier_block *nfb,
unsigned long action, void *hcpu)
{
static int prev_khz[NR_CPUS];
int rc, cpu = (int)hcpu;
struct scalable *sc = &drv.scalable[cpu];
unsigned long hot_unplug_khz = acpuclk_krait_data.power_collapse_khz;
switch (action & ~CPU_TASKS_FROZEN) {
case CPU_DEAD:
prev_khz[cpu] = acpuclk_krait_get_rate(cpu);
/* Fall through. */
case CPU_UP_CANCELED:
acpuclk_krait_set_rate(cpu, hot_unplug_khz, SETRATE_HOTPLUG);
regulator_disable(sc->vreg[VREG_CORE].reg);
regulator_set_optimum_mode(sc->vreg[VREG_CORE].reg, 0);
regulator_set_voltage(sc->vreg[VREG_CORE].reg, 0,
sc->vreg[VREG_CORE].max_vdd);
break;
case CPU_UP_PREPARE:
if (!sc->initialized) {
rc = per_cpu_init(cpu);
if (rc)
return NOTIFY_BAD;
break;
}
if (WARN_ON(!prev_khz[cpu]))
return NOTIFY_BAD;
rc = regulator_set_voltage(sc->vreg[VREG_CORE].reg,
sc->vreg[VREG_CORE].cur_vdd,
sc->vreg[VREG_CORE].max_vdd);
if (rc < 0)
return NOTIFY_BAD;
rc = regulator_set_optimum_mode(sc->vreg[VREG_CORE].reg,
sc->vreg[VREG_CORE].cur_ua);
if (rc < 0)
return NOTIFY_BAD;
rc = regulator_enable(sc->vreg[VREG_CORE].reg);
if (rc < 0)
return NOTIFY_BAD;
acpuclk_krait_set_rate(cpu, prev_khz[cpu], SETRATE_HOTPLUG);
break;
default:
break;
}
return NOTIFY_OK;
}
static struct notifier_block __cpuinitdata acpuclk_cpu_notifier = {
.notifier_call = acpuclk_cpu_callback,
};
static const int __init krait_needs_vmin(void)
{
switch (read_cpuid_id()) {
case 0x511F04D0: /* KR28M2A20 */
case 0x511F04D1: /* KR28M2A21 */
case 0x510F06F0: /* KR28M4A10 */
return 1;
default:
return 0;
};
}
static void __init krait_apply_vmin(struct acpu_level *tbl)
{
for (; tbl->speed.khz != 0; tbl++) {
if (tbl->vdd_core < 1150000)
tbl->vdd_core = 1150000;
tbl->avsdscr_setting = 0;
}
}
void __init get_krait_bin_format_a(void __iomem *base, struct bin_info *bin)
{
u32 pte_efuse = readl_relaxed(base);
bin->speed = pte_efuse & 0xF;
if (bin->speed == 0xF)
bin->speed = (pte_efuse >> 4) & 0xF;
bin->speed_valid = bin->speed != 0xF;
bin->pvs = (pte_efuse >> 10) & 0x7;
if (bin->pvs == 0x7)
bin->pvs = (pte_efuse >> 13) & 0x7;
bin->pvs_valid = bin->pvs != 0x7;
}
void __init get_krait_bin_format_b(void __iomem *base, struct bin_info *bin)
{
u32 pte_efuse, redundant_sel;
pte_efuse = readl_relaxed(base);
redundant_sel = (pte_efuse >> 24) & 0x7;
bin->speed = pte_efuse & 0x7;
bin->pvs = (pte_efuse >> 6) & 0x7;
switch (redundant_sel) {
case 1:
bin->speed = (pte_efuse >> 27) & 0x7;
break;
case 2:
bin->pvs = (pte_efuse >> 27) & 0x7;
break;
}
bin->speed_valid = true;
/* Check PVS_BLOW_STATUS */
pte_efuse = readl_relaxed(base + 0x4);
bin->pvs_valid = !!(pte_efuse & BIT(21));
}
static struct pvs_table * __init select_freq_plan(
const struct acpuclk_krait_params *params)
{
void __iomem *pte_efuse_base;
struct bin_info bin;
pte_efuse_base = ioremap(params->pte_efuse_phys, 8);
if (!pte_efuse_base) {
dev_err(drv.dev, "Unable to map PTE eFuse base\n");
return NULL;
}
params->get_bin_info(pte_efuse_base, &bin);
iounmap(pte_efuse_base);
if (bin.speed_valid) {
drv.speed_bin = bin.speed;
dev_info(drv.dev, "SPEED BIN: %d\n", drv.speed_bin);
} else {
drv.speed_bin = 0;
dev_warn(drv.dev, "SPEED BIN: Defaulting to %d\n",
drv.speed_bin);
}
if (bin.pvs_valid) {
drv.pvs_bin = bin.pvs;
dev_info(drv.dev, "ACPU PVS: %d\n", drv.pvs_bin);
} else {
drv.pvs_bin = 0;
dev_warn(drv.dev, "ACPU PVS: Defaulting to %d\n",
drv.pvs_bin);
}
return &params->pvs_tables[drv.speed_bin][drv.pvs_bin];
}
static void __init drv_data_init(struct device *dev,
const struct acpuclk_krait_params *params)
{
struct pvs_table *pvs;
drv.dev = dev;
drv.scalable = kmemdup(params->scalable, params->scalable_size,
GFP_KERNEL);
BUG_ON(!drv.scalable);
drv.hfpll_data = kmemdup(params->hfpll_data, sizeof(*drv.hfpll_data),
GFP_KERNEL);
BUG_ON(!drv.hfpll_data);
drv.l2_freq_tbl = kmemdup(params->l2_freq_tbl, params->l2_freq_tbl_size,
GFP_KERNEL);
BUG_ON(!drv.l2_freq_tbl);
drv.bus_scale = kmemdup(params->bus_scale, sizeof(*drv.bus_scale),
GFP_KERNEL);
BUG_ON(!drv.bus_scale);
drv.bus_scale->usecase = kmemdup(drv.bus_scale->usecase,
drv.bus_scale->num_usecases * sizeof(*drv.bus_scale->usecase),
GFP_KERNEL);
BUG_ON(!drv.bus_scale->usecase);
pvs = select_freq_plan(params);
BUG_ON(!pvs->table);
drv.acpu_freq_tbl = kmemdup(pvs->table, pvs->size, GFP_KERNEL);
BUG_ON(!drv.acpu_freq_tbl);
drv.boost_uv = pvs->boost_uv;
acpuclk_krait_data.power_collapse_khz = params->stby_khz;
acpuclk_krait_data.wait_for_irq_khz = params->stby_khz;
}
static void __init hw_init(void)
{
struct scalable *l2 = &drv.scalable[L2];
const struct l2_level *l2_level;
int cpu, rc;
if (krait_needs_vmin())
krait_apply_vmin(drv.acpu_freq_tbl);
l2->hfpll_base = ioremap(l2->hfpll_phys_base, SZ_32);
BUG_ON(!l2->hfpll_base);
rc = rpm_regulator_init(l2, VREG_HFPLL_A,
l2->vreg[VREG_HFPLL_A].max_vdd, false);
BUG_ON(rc);
rc = rpm_regulator_init(l2, VREG_HFPLL_B,
l2->vreg[VREG_HFPLL_B].max_vdd, false);
BUG_ON(rc);
l2_level = find_cur_l2_level();
if (!l2_level) {
l2_level = drv.l2_freq_tbl;
dev_dbg(drv.dev, "L2 is running at an unknown rate. Defaulting to %lu KHz.\n",
l2_level->speed.khz);
} else {
dev_dbg(drv.dev, "L2 is running at %lu KHz\n",
l2_level->speed.khz);
}
rc = init_clock_sources(l2, &l2_level->speed);
BUG_ON(rc);
for_each_online_cpu(cpu) {
rc = per_cpu_init(cpu);
BUG_ON(rc);
}
bus_init(l2_level);
}
int __init acpuclk_krait_init(struct device *dev,
const struct acpuclk_krait_params *params)
{
drv_data_init(dev, params);
hw_init();
cpufreq_table_init();
dcvs_freq_init();
acpuclk_register(&acpuclk_krait_data);
register_hotcpu_notifier(&acpuclk_cpu_notifier);
acpuclk_krait_debug_init(&drv);
return 0;
}