655 lines
14 KiB
Plaintext
655 lines
14 KiB
Plaintext
/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 and
|
|
* only version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
/include/ "dsi-panel-sharp-qhd-video.dtsi"
|
|
/include/ "msm8974-camera-sensor-dragonboard.dtsi"
|
|
/include/ "msm8974-leds.dtsi"
|
|
|
|
&soc {
|
|
serial@f991e000 {
|
|
status = "ok";
|
|
};
|
|
|
|
qcom,mdss_dsi_sharp_qhd_video {
|
|
status = "ok";
|
|
};
|
|
|
|
qcom,hdmi_tx@fd922100 {
|
|
status = "ok";
|
|
};
|
|
|
|
gpio_keys {
|
|
compatible = "gpio-keys";
|
|
input-name = "gpio-keys";
|
|
|
|
vol_up {
|
|
label = "volume_up";
|
|
gpios = <&pm8941_gpios 5 0x1>;
|
|
linux,input-type = <1>;
|
|
linux,code = <115>;
|
|
gpio-key,wakeup;
|
|
debounce-interval = <15>;
|
|
};
|
|
|
|
general {
|
|
label = "general";
|
|
gpios = <&pm8941_gpios 23 0x1>;
|
|
linux,input-type = <1>;
|
|
linux,code = <102>;
|
|
gpio-key,wakeup;
|
|
debounce-interval = <15>;
|
|
};
|
|
};
|
|
|
|
bt_ar3002 {
|
|
compatible = "qca,ar3002";
|
|
qca,bt-reset-gpio = <&pm8941_gpios 34 0>;
|
|
};
|
|
|
|
hsic_hub {
|
|
compatible = "qcom,hsic-smsc-hub";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
smsc,reset-gpio = <&pm8941_gpios 8 0x00>;
|
|
|
|
hsic_host: hsic@f9a00000 {
|
|
compatible = "qcom,hsic-host";
|
|
reg = <0xf9a00000 0x400>;
|
|
#address-cells = <0>;
|
|
interrupt-parent = <&hsic_host>;
|
|
interrupts = <0 1 2>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0xffffffff>;
|
|
interrupt-map = <0 &intc 0 136 0
|
|
1 &intc 0 148 0
|
|
2 &msmgpio 144 0x8>;
|
|
interrupt-names = "core_irq", "async_irq", "wakeup";
|
|
HSIC_VDDCX-supply = <&pm8841_s2>;
|
|
HSIC_GDSC-supply = <&gdsc_usb_hsic>;
|
|
hsic,strobe-gpio = <&msmgpio 144 0x00>;
|
|
hsic,data-gpio = <&msmgpio 145 0x00>;
|
|
hsic,ignore-cal-pad-config;
|
|
hsic,strobe-pad-offset = <0x2050>;
|
|
hsic,data-pad-offset = <0x2054>;
|
|
|
|
qcom,msm-bus,name = "hsic";
|
|
qcom,msm-bus,num-cases = <2>;
|
|
qcom,msm-bus,active-only = <0>;
|
|
qcom,msm-bus,num-paths = <1>;
|
|
qcom,msm-bus,vectors-KBps =
|
|
<85 512 0 0>,
|
|
<85 512 40000 160000>;
|
|
};
|
|
};
|
|
|
|
i2c@f9923000 {
|
|
status = "ok";
|
|
atmel_mxt_ts@4a {
|
|
compatible = "atmel,mxt-ts";
|
|
reg = <0x4a>;
|
|
interrupt-parent = <&msmgpio>;
|
|
interrupts = <61 0x2>;
|
|
vdd_ana-supply = <&pm8941_l18>;
|
|
vcc_i2c-supply = <&pm8941_s3>;
|
|
atmel,reset-gpio = <&msmgpio 60 0x00>;
|
|
atmel,irq-gpio = <&msmgpio 61 0x00>;
|
|
atmel,panel-coords = <0 0 566 1067>;
|
|
atmel,display-coords = <0 0 540 960>;
|
|
atmel,i2c-pull-up;
|
|
atmel,cfg_1 {
|
|
atmel,family-id = <0x81>;
|
|
atmel,variant-id = <0x19>;
|
|
atmel,version = <0x10>;
|
|
atmel,build = <0xaa>;
|
|
atmel,config = [
|
|
/* Object 38, Instance = 0 */
|
|
0F 02 00 17 04 0C 00 00
|
|
/* Object 7, Instance = 0 */
|
|
30 FF 19
|
|
/* Object 8, Instance = 0 */
|
|
1B 00 05 01 00 00 08 08 00 00
|
|
/* Object 9, Instance = 0 */
|
|
83 00 00 13 0B 00 10 23 01 03
|
|
0A 0F 01 0B 04 05 28 0A 2B 04
|
|
36 02 00 00 00 00 8F 28 8F 50
|
|
12 0F 32 32 02
|
|
/* Object 15, Instance = 0 */
|
|
00 00 00 00 00 00 00 00 00 00
|
|
00
|
|
/* Object 18, Instance = 0 */
|
|
00 00
|
|
/* Object 19, Instance = 0 */
|
|
00 00 00 00 00 00 00 00 00 00
|
|
00 00 00 00 00 00
|
|
/* Object 23, Instance = 0 */
|
|
00 00 00 00 00 00 00 00 00 00
|
|
00 00 00 00 00
|
|
/* Object 25, Instance = 0 */
|
|
00 00 00 00 00 00 00 00 00 00
|
|
00 00 00 00
|
|
/* Object 40, Instance = 0 */
|
|
00 00 00 00 00
|
|
/* Object 42, Instance = 0 */
|
|
00 00 00 00 00 00 00 00
|
|
/* Object 46, Instance = 0 */
|
|
00 03 10 30 00 00 01 00 00
|
|
/* Object 47, Instance = 0 */
|
|
00 00 00 00 00 00 00 00 00 00
|
|
/* Object 48, Instance = 0 */
|
|
00 00 00 00 00 00 00 00 00 00
|
|
00 00 00 00 00 00 00 00 00 00
|
|
00 00 00 00 00 00 00 00 00 00
|
|
00 00 00 00 00 00 00 00 00 00
|
|
00 00 00 00 00 00 00 00 00 00
|
|
00 00 00 00
|
|
];
|
|
};
|
|
};
|
|
};
|
|
|
|
gen-vkeys {
|
|
compatible = "qcom,gen-vkeys";
|
|
label = "atmel_mxt_ts";
|
|
qcom,disp-maxx = <540>;
|
|
qcom,disp-maxy = <960>;
|
|
qcom,panel-maxx = <566>;
|
|
qcom,panel-maxy = <1067>;
|
|
qcom,key-codes = <158 139 102 217>;
|
|
};
|
|
|
|
sound {
|
|
qcom,model = "apq8074-taiko-db-snd-card";
|
|
qcom,hdmi-audio-rx;
|
|
|
|
qcom,audio-routing =
|
|
"RX_BIAS", "MCLK",
|
|
"LDO_H", "MCLK",
|
|
"AMIC1", "MIC BIAS1 External",
|
|
"MIC BIAS1 External", "Analog Mic4",
|
|
"AMIC2", "MIC BIAS2 External",
|
|
"MIC BIAS2 External", "Headset Mic",
|
|
"AMIC3", "MIC BIAS2 External",
|
|
"MIC BIAS2 External", "ANCRight Headset Mic",
|
|
"AMIC4", "MIC BIAS2 External",
|
|
"MIC BIAS2 External", "ANCLeft Headset Mic",
|
|
"AMIC5", "MIC BIAS1 External",
|
|
"MIC BIAS1 External", "Analog Mic6",
|
|
"AMIC6", "MIC BIAS1 External",
|
|
"MIC BIAS1 External", "Analog Mic7",
|
|
"DMIC1", "MIC BIAS3 External",
|
|
"MIC BIAS3 External", "Digital Mic1",
|
|
"DMIC2", "MIC BIAS3 External",
|
|
"MIC BIAS3 External", "Digital Mic2",
|
|
"DMIC3", "MIC BIAS4 External",
|
|
"MIC BIAS4 External", "Digital Mic3",
|
|
"DMIC4", "MIC BIAS3 External",
|
|
"MIC BIAS3 External", "Digital Mic4",
|
|
"DMIC5", "MIC BIAS4 External",
|
|
"MIC BIAS4 External", "Digital Mic5",
|
|
"DMIC6", "MIC BIAS4 External",
|
|
"MIC BIAS4 External", "Digital Mic6";
|
|
};
|
|
|
|
qcom,pronto@fb21b000 {
|
|
status = "disabled";
|
|
};
|
|
|
|
qcom,iris-fm {
|
|
status = "disabled";
|
|
};
|
|
|
|
qcom,wcnss-wlan@fb000000 {
|
|
status = "disabled";
|
|
};
|
|
|
|
qcom,smd-wcnss {
|
|
status = "disabled";
|
|
};
|
|
|
|
qcom,smsm-wcnss {
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
&mdss_fb0 {
|
|
qcom,memory-reservation-size = <0x1000000>; /* size 16MB */
|
|
};
|
|
|
|
&sdcc3 {
|
|
qcom,sup-voltages = <2000 2000>;
|
|
status = "ok";
|
|
};
|
|
|
|
&pm8941_l19 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
qcom,init-voltage = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
&pm8941_l10 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
qcom,init-voltage = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
&uart7 {
|
|
status = "ok";
|
|
qcom,tx-gpio = <&msmgpio 41 0x00>;
|
|
qcom,rx-gpio = <&msmgpio 42 0x00>;
|
|
qcom,cts-gpio = <&msmgpio 43 0x00>;
|
|
qcom,rfr-gpio = <&msmgpio 44 0x00>;
|
|
};
|
|
|
|
&usb_otg {
|
|
status = "ok";
|
|
qcom,hsusb-otg-otg-control = <2>;
|
|
qcom,hsusb-otg-mode = <3>;
|
|
vbus_otg-supply = <&pm8941_mvs1>;
|
|
qcom,usb2-enable-hsphy2;
|
|
qcom,dp-manual-pullup;
|
|
|
|
#address-cells = <0>;
|
|
interrupt-parent = <&usb_otg>;
|
|
interrupts = <0 1 2>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0xffffffff>;
|
|
interrupt-map = <0 &intc 0 134 0
|
|
1 &intc 0 140 0
|
|
2 &spmi_bus 0x0 0x0 0x9 0x0>;
|
|
interrupt-names = "core_irq", "async_irq", "pmic_id_irq";
|
|
};
|
|
|
|
&usb3 {
|
|
qcom,charging-disabled;
|
|
vbus_dwc3-supply = <0>;
|
|
dwc3@f9200000 {
|
|
host-only-mode;
|
|
};
|
|
};
|
|
|
|
&slim_msm {
|
|
taiko_codec {
|
|
qcom,cdc-micbias2-ext-cap;
|
|
qcom,cdc-micbias3-ext-cap;
|
|
};
|
|
};
|
|
|
|
&pm8941_gpios {
|
|
gpio@c000 { /* GPIO 1 */
|
|
qcom,mode = <0>;
|
|
qcom,pull = <0>;
|
|
qcom,vin-sel = <2>;
|
|
qcom,src-sel = <0>;
|
|
};
|
|
|
|
gpio@c100 { /* GPIO 2 */
|
|
qcom,mode = <0>;
|
|
qcom,pull = <0>;
|
|
qcom,vin-sel = <2>;
|
|
qcom,src-sel = <0>;
|
|
};
|
|
|
|
gpio@c200 { /* GPIO 3 */
|
|
};
|
|
|
|
gpio@c300 { /* GPIO 4 */
|
|
};
|
|
|
|
gpio@c400 { /* GPIO 5 */
|
|
qcom,mode = <0>;
|
|
qcom,pull = <0>;
|
|
qcom,vin-sel = <2>;
|
|
qcom,src-sel = <0>;
|
|
};
|
|
|
|
gpio@c500 { /* GPIO 6 */
|
|
/* TUSB3_HUB-RESET */
|
|
qcom,mode = <1>; /* QPNP_PIN_MODE_DIG_OUT */
|
|
qcom,output-type = <0>; /* QPNP_PIN_OUT_BUF_CMOS */
|
|
qcom,pull = <0>; /* QPNP_PIN_PULL_30 */
|
|
qcom,vin-sel = <0>; /* QPNP_PIN_VIN0 VPH */
|
|
qcom,out-strength = <2>; /* QPNP_PIN_OUT_STRENGTH_MED */
|
|
qcom,src-sel = <0>; /* QPNP_PIN_SEL_FUNC_CONSTANT */
|
|
qcom,invert = <1>; /* Keep it out of reset */
|
|
qcom,master-en = <1>;
|
|
};
|
|
|
|
gpio@c600 { /* GPIO 7 */
|
|
};
|
|
|
|
gpio@c700 { /* GPIO 8 */
|
|
/* HSIC_HUB-RESET */
|
|
qcom,mode = <1>; /* DIG_OUT */
|
|
qcom,pull = <5>; /* PULL_NO */
|
|
qcom,out-strength = <2>; /* STRENGTH_MED */
|
|
qcom,master-en = <1>;
|
|
};
|
|
|
|
gpio@c800 { /* GPIO 9 */
|
|
/* GbE_RST_N */
|
|
qcom,mode = <1>; /* QPNP_PIN_MODE_DIG_OUT */
|
|
qcom,output-type = <0>; /* QPNP_PIN_OUT_BUF_CMOS */
|
|
qcom,pull = <0>; /* QPNP_PIN_PULL_30 */
|
|
qcom,vin-sel = <0>; /* QPNP_PIN_VIN0 VPH */
|
|
qcom,out-strength = <2>; /* QPNP_PIN_OUT_STRENGTH_MED */
|
|
qcom,src-sel = <0>; /* QPNP_PIN_SEL_FUNC_CONSTANT */
|
|
qcom,invert = <1>; /* Keep it out of reset */
|
|
qcom,master-en = <1>;
|
|
};
|
|
|
|
gpio@c900 { /* GPIO 10 */
|
|
/* SATA_RST_N */
|
|
qcom,mode = <1>; /* QPNP_PIN_MODE_DIG_OUT */
|
|
qcom,output-type = <0>; /* QPNP_PIN_OUT_BUF_CMOS */
|
|
qcom,pull = <0>; /* QPNP_PIN_PULL_30 */
|
|
qcom,vin-sel = <0>; /* QPNP_PIN_VIN0 VPH */
|
|
qcom,out-strength = <2>; /* QPNP_PIN_OUT_STRENGTH_MED */
|
|
qcom,src-sel = <0>; /* QPNP_PIN_SEL_FUNC_CONSTANT */
|
|
qcom,invert = <1>; /* Keep it out of reset */
|
|
qcom,master-en = <1>;
|
|
};
|
|
|
|
gpio@ca00 { /* GPIO 11 */
|
|
};
|
|
|
|
gpio@cb00 { /* GPIO 12 */
|
|
};
|
|
|
|
gpio@cc00 { /* GPIO 13 */
|
|
};
|
|
|
|
gpio@cd00 { /* GPIO 14 */
|
|
};
|
|
|
|
gpio@ce00 { /* GPIO 15 */
|
|
qcom,mode = <1>;
|
|
qcom,output-type = <0>;
|
|
qcom,pull = <5>;
|
|
qcom,vin-sel = <2>;
|
|
qcom,out-strength = <3>;
|
|
qcom,src-sel = <2>;
|
|
qcom,master-en = <1>;
|
|
};
|
|
|
|
gpio@cf00 { /* GPIO 16 */
|
|
};
|
|
|
|
gpio@d000 { /* GPIO 17 */
|
|
};
|
|
|
|
gpio@d100 { /* GPIO 18 */
|
|
};
|
|
|
|
gpio@d200 { /* GPIO 19 */
|
|
qcom,mode = <1>; /* QPNP_PIN_MODE_DIG_OUT */
|
|
qcom,output-type = <0>; /* QPNP_PIN_OUT_BUF_CMOS */
|
|
qcom,pull = <5>; /* QPNP_PIN_PULL_NO */
|
|
qcom,vin-sel = <2>; /* QPNP_PIN_VIN2 */
|
|
qcom,out-strength = <2>; /* QPNP_PIN_OUT_STRENGTH_MED */
|
|
qcom,src-sel = <0>; /* QPNP_PIN_SEL_FUNC_CONSTANT */
|
|
qcom,master-en = <1>;
|
|
};
|
|
|
|
gpio@d300 { /* GPIO 20 */
|
|
};
|
|
|
|
gpio@d400 { /* GPIO 21 */
|
|
};
|
|
|
|
gpio@d500 { /* GPIO 22 */
|
|
};
|
|
|
|
gpio@d600 { /* GPIO 23 */
|
|
};
|
|
|
|
gpio@d700 { /* GPIO 24 */
|
|
};
|
|
|
|
gpio@d800 { /* GPIO 25 */
|
|
};
|
|
|
|
gpio@d900 { /* GPIO 26 */
|
|
};
|
|
|
|
gpio@da00 { /* GPIO 27 */
|
|
};
|
|
|
|
gpio@db00 { /* GPIO 28 */
|
|
};
|
|
|
|
gpio@dc00 { /* GPIO 29 */
|
|
qcom,pull = <0>; /* set to default pull */
|
|
qcom,master-en = <1>;
|
|
qcom,vin-sel = <2>; /* select 1.8 V source */
|
|
};
|
|
|
|
gpio@dd00 { /* GPIO 30 */
|
|
};
|
|
|
|
gpio@de00 { /* GPIO 31 */
|
|
};
|
|
|
|
gpio@df00 { /* GPIO 32 */
|
|
};
|
|
|
|
gpio@e000 { /* GPIO 33 */
|
|
qcom,mode = <1>; /* QPNP_PIN_MODE_DIG_OUT */
|
|
qcom,output-type = <0>; /* QPNP_PIN_OUT_BUF_CMOS */
|
|
qcom,pull = <5>; /* QPNP_PIN_PULL_NO */
|
|
qcom,vin-sel = <2>; /* QPNP_PIN_VIN2 */
|
|
qcom,out-strength = <2>; /* QPNP_PIN_OUT_STRENGTH_MED */
|
|
qcom,src-sel = <0>; /* QPNP_PIN_SEL_FUNC_CONSTANT */
|
|
qcom,invert = <1>;
|
|
qcom,master-en = <1>;
|
|
};
|
|
|
|
gpio@e100 { /* GPIO 34 */
|
|
qcom,mode = <1>; /* QPNP_PIN_MODE_DIG_OUT */
|
|
qcom,output-type = <0>; /* QPNP_PIN_OUT_BUF_CMOS */
|
|
qcom,pull = <5>; /* QPNP_PIN_PULL_NO */
|
|
qcom,vin-sel = <2>; /* QPNP_PIN_VIN2 */
|
|
qcom,out-strength = <2>; /* QPNP_PIN_OUT_STRENGTH_MED */
|
|
qcom,src-sel = <0>; /* QPNP_PIN_SEL_FUNC_CONSTANT */
|
|
qcom,invert = <0>;
|
|
qcom,master-en = <1>;
|
|
};
|
|
|
|
gpio@e200 { /* GPIO 35 */
|
|
};
|
|
|
|
gpio@e300 { /* GPIO 36 */
|
|
qcom,mode = <1>; /* QPNP_PIN_MODE_DIG_OUT */
|
|
qcom,output-type = <0>; /* QPNP_PIN_OUT_BUF_CMOS */
|
|
qcom,pull = <5>; /* QPNP_PIN_PULL_NO */
|
|
qcom,vin-sel = <2>; /* QPNP_PIN_VIN2 */
|
|
qcom,out-strength = <3>; /* QPNP_PIN_OUT_STRENGTH_HIGH */
|
|
qcom,src-sel = <3>; /* QPNP_PIN_SEL_FUNC_2 */
|
|
qcom,master-en = <1>;
|
|
};
|
|
};
|
|
|
|
&pm8941_mpps {
|
|
|
|
mpp@a000 { /* MPP 1 */
|
|
};
|
|
|
|
mpp@a100 { /* MPP 2 */
|
|
};
|
|
|
|
mpp@a200 { /* MPP 3 */
|
|
};
|
|
|
|
mpp@a300 { /* MPP 4 */
|
|
};
|
|
|
|
mpp@a400 { /* MPP 5 */
|
|
};
|
|
|
|
mpp@a500 { /* MPP 6 */
|
|
};
|
|
|
|
mpp@a600 { /* MPP 7 */
|
|
};
|
|
|
|
mpp@a700 { /* MPP 8 */
|
|
};
|
|
};
|
|
|
|
&pm8841_mpps {
|
|
|
|
mpp@a000 { /* MPP 1 */
|
|
};
|
|
|
|
mpp@a100 { /* MPP 2 */
|
|
};
|
|
|
|
mpp@a200 { /* MPP 3*/
|
|
};
|
|
|
|
mpp@a300 { /* MPP 4*/
|
|
};
|
|
};
|
|
|
|
&spi_epm {
|
|
epm-adc@0 {
|
|
compatible = "cy,epm-adc-cy8c5568lti-114";
|
|
reg = <0>;
|
|
interrupt-parent = <&msmgpio>;
|
|
spi-max-frequency = <960000>;
|
|
qcom,channels = <31>;
|
|
qcom,gain = <50 50 50 50 50 100 50 50 50 50
|
|
50 50 50 50 100 50 50 50 50 100
|
|
50 50 50 100 50 50 50 1 1 1
|
|
1>;
|
|
qcom,rsense = <40 10 10 25 10 1000 75 25 10 25
|
|
33 500 200 10 500 100 33 200 25 100
|
|
75 500 50 200 5 5 3 1 1 1
|
|
1>;
|
|
qcom,channel-type = <0xf0000000>;
|
|
};
|
|
};
|
|
|
|
&spmi_bus {
|
|
qcom,pm8941@1 {
|
|
qcom,leds@d000 {
|
|
qcom,rgb_2 {
|
|
status = "ok";
|
|
qcom,default-state = "on";
|
|
qcom,turn-off-delay-ms = <1000>;
|
|
};
|
|
};
|
|
|
|
qcom,leds@d800 {
|
|
status = "okay";
|
|
qcom,wled_0 {
|
|
label = "wled";
|
|
linux,name = "wled:backlight";
|
|
linux,default-trigger = "bkl-trigger";
|
|
qcom,cs-out-en;
|
|
qcom,op-fdbck = <1>;
|
|
qcom,default-state = "on";
|
|
qcom,max-current = <20>;
|
|
qcom,ctrl-delay-us = <0>;
|
|
qcom,boost-curr-lim = <3>;
|
|
qcom,cp-sel = <0>;
|
|
qcom,switch-freq = <2>;
|
|
qcom,ovp-val = <1>;
|
|
qcom,num-strings = <1>;
|
|
qcom,id = <0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&pm8941_chg {
|
|
status = "ok";
|
|
|
|
qcom,charging-disabled;
|
|
|
|
qcom,chgr@1000 {
|
|
status = "ok";
|
|
};
|
|
|
|
qcom,buck@1100 {
|
|
status = "ok";
|
|
};
|
|
|
|
qcom,usb-chgpth@1300 {
|
|
status = "ok";
|
|
};
|
|
|
|
qcom,dc-chgpth@1400 {
|
|
status = "ok";
|
|
};
|
|
|
|
qcom,boost@1500 {
|
|
status = "ok";
|
|
};
|
|
|
|
qcom,chg-misc@1600 {
|
|
status = "ok";
|
|
};
|
|
};
|
|
|
|
&sdhc_1 {
|
|
vdd-supply = <&pm8941_l20>;
|
|
vdd-io-supply = <&pm8941_s3>;
|
|
|
|
qcom,vdd-always-on;
|
|
qcom,vdd-lpm-sup;
|
|
qcom,vdd-voltage-level = <2950000 2950000>;
|
|
qcom,vdd-current-level = <800 500000>;
|
|
|
|
qcom,vdd-io-always-on;
|
|
qcom,vdd-io-voltage-level = <1800000 1800000>;
|
|
qcom,vdd-io-current-level = <250 154000>;
|
|
|
|
qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
|
|
qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
|
|
qcom,pad-drv-on = <0x4 0x4 0x4>; /* 10mA, 10mA, 10mA */
|
|
qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */
|
|
|
|
qcom,nonremovable;
|
|
status = "ok";
|
|
};
|
|
|
|
&sdhc_2 {
|
|
#address-cells = <0>;
|
|
interrupt-parent = <&sdhc_2>;
|
|
interrupts = <0 1 2>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0xffffffff>;
|
|
interrupt-map = <0 &intc 0 125 0
|
|
1 &intc 0 221 0
|
|
2 &msmgpio 62 0x3>;
|
|
interrupt-names = "hc_irq", "pwr_irq", "status_irq";
|
|
cd-gpios = <&msmgpio 62 0x1>;
|
|
|
|
vdd-supply = <&pm8941_l21>;
|
|
vdd-io-supply = <&pm8941_l13>;
|
|
|
|
qcom,vdd-voltage-level = <2950000 2950000>;
|
|
qcom,vdd-current-level = <9000 800000>;
|
|
|
|
qcom,vdd-io-voltage-level = <1800000 2950000>;
|
|
qcom,vdd-io-current-level = <6 22000>;
|
|
|
|
qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
|
|
qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
|
|
qcom,pad-drv-on = <0x4 0x4 0x4>; /* 10mA, 10mA, 10mA */
|
|
qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */
|
|
status = "ok";
|
|
};
|