407 lines
9.3 KiB
Plaintext
Executable File
407 lines
9.3 KiB
Plaintext
Executable File
/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 and
|
|
* only version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
/include/ "dsi-panel-nt35590-720p-video.dtsi"
|
|
/include/ "msm8226-camera-sensor-qrd.dtsi"
|
|
|
|
&soc {
|
|
serial@f991f000 {
|
|
status = "ok";
|
|
};
|
|
|
|
qcom,mdss_dsi_nt35590_720p_video {
|
|
status = "ok";
|
|
};
|
|
|
|
i2c@f9927000 { /* BLSP1 QUP5 */
|
|
synaptics@20 {
|
|
compatible = "synaptics,rmi4";
|
|
reg = <0x20>;
|
|
interrupt-parent = <&msmgpio>;
|
|
interrupts = <17 0x2008>;
|
|
vdd-supply = <&pm8226_l19>;
|
|
vcc_i2c-supply = <&pm8226_lvs1>;
|
|
synaptics,reset-gpio = <&msmgpio 16 0x00>;
|
|
synaptics,irq-gpio = <&msmgpio 17 0x2008>;
|
|
synaptics,button-map = <139 102 158>;
|
|
synaptics,i2c-pull-up;
|
|
};
|
|
};
|
|
|
|
gpio_keys {
|
|
compatible = "gpio-keys";
|
|
input-name = "gpio-keys";
|
|
|
|
camera_focus {
|
|
label = "camera_focus";
|
|
gpios = <&msmgpio 108 0x1>;
|
|
linux,input-type = <1>;
|
|
linux,code = <0x210>;
|
|
gpio-key,wakeup;
|
|
debounce-interval = <15>;
|
|
};
|
|
|
|
camera_snapshot {
|
|
label = "camera_snapshot";
|
|
gpios = <&msmgpio 107 0x1>;
|
|
linux,input-type = <1>;
|
|
linux,code = <0x2fe>;
|
|
gpio-key,wakeup;
|
|
debounce-interval = <15>;
|
|
};
|
|
|
|
vol_up {
|
|
label = "volume_up";
|
|
gpios = <&msmgpio 106 0x1>;
|
|
linux,input-type = <1>;
|
|
linux,code = <115>;
|
|
gpio-key,wakeup;
|
|
debounce-interval = <15>;
|
|
};
|
|
};
|
|
|
|
spi@f9923000 {
|
|
ethernet-switch@3 {
|
|
compatible = "micrel,ks8851";
|
|
reg = <3>;
|
|
interrupt-parent = <&msmgpio>;
|
|
interrupts = <0 115 0>;
|
|
spi-max-frequency = <4800000>;
|
|
rst-gpio = <&msmgpio 114 0>;
|
|
vdd-io-supply = <&pm8226_lvs1>;
|
|
vdd-phy-supply = <&pm8226_lvs1>;
|
|
};
|
|
};
|
|
|
|
sound {
|
|
qcom,audio-routing =
|
|
"RX_BIAS", "MCLK",
|
|
"LDO_H", "MCLK",
|
|
"SPK_OUT", "MCLK",
|
|
"SPK_OUT", "EXT_VDD_SPKR",
|
|
"AMIC1", "MIC BIAS1 External",
|
|
"MIC BIAS1 External", "Handset Mic",
|
|
"AMIC2", "MIC BIAS2 External",
|
|
"MIC BIAS2 External", "Headset Mic",
|
|
"AMIC3", "MIC BIAS1 External",
|
|
"MIC BIAS1 External", "ANCRight Headset Mic",
|
|
"AMIC4", "MIC BIAS2 External",
|
|
"MIC BIAS2 External", "ANCLeft Headset Mic";
|
|
|
|
qcom,cdc-mclk-gpios = <&pm8226_gpios 1 0>;
|
|
qcom,cdc-vdd-spkr-gpios = <&pm8226_gpios 2 0>;
|
|
qcom,cdc-us-euro-gpios = <&msmgpio 69 0>;
|
|
};
|
|
};
|
|
|
|
&sdcc1 {
|
|
vdd-supply = <&pm8226_l17>;
|
|
qcom,vdd-always-on;
|
|
qcom,vdd-lpm-sup;
|
|
qcom,vdd-voltage-level = <2950000 2950000>;
|
|
qcom,vdd-current-level = <800 500000>;
|
|
|
|
vdd-io-supply = <&pm8226_l6>;
|
|
qcom,vdd-io-always-on;
|
|
qcom,vdd-io-voltage-level = <1800000 1800000>;
|
|
qcom,vdd-io-current-level = <250 154000>;
|
|
|
|
qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
|
|
qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
|
|
qcom,pad-drv-on = <0x4 0x4 0x4>; /* 10mA, 10mA, 10mA */
|
|
qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */
|
|
|
|
qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>;
|
|
qcom,sup-voltages = <2950 2950>;
|
|
|
|
qcom,bus-speed-mode = "HS200_1p8v", "DDR_1p8v";
|
|
qcom,nonremovable;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
&sdhc_1 {
|
|
vdd-supply = <&pm8226_l17>;
|
|
qcom,vdd-always-on;
|
|
qcom,vdd-lpm-sup;
|
|
qcom,vdd-voltage-level = <2950000 2950000>;
|
|
qcom,vdd-current-level = <800 500000>;
|
|
|
|
vdd-io-supply = <&pm8226_l6>;
|
|
qcom,vdd-io-always-on;
|
|
qcom,vdd-io-voltage-level = <1800000 1800000>;
|
|
qcom,vdd-io-current-level = <250 154000>;
|
|
|
|
qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
|
|
qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
|
|
qcom,pad-drv-on = <0x4 0x4 0x4>; /* 10mA, 10mA, 10mA */
|
|
qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */
|
|
|
|
qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>;
|
|
qcom,bus-speed-mode = "HS200_1p8v", "DDR_1p8v";
|
|
qcom,nonremovable;
|
|
|
|
status = "ok";
|
|
};
|
|
|
|
&sdcc2 {
|
|
vdd-supply = <&pm8226_l18>;
|
|
qcom,vdd-voltage-level = <2950000 2950000>;
|
|
qcom,vdd-current-level = <9000 800000>;
|
|
|
|
vdd-io-supply = <&pm8226_l21>;
|
|
qcom,vdd-io-always-on;
|
|
qcom,vdd-io-lpm-sup;
|
|
qcom,vdd-io-voltage-level = <1800000 2950000>;
|
|
qcom,vdd-io-current-level = <6 22000>;
|
|
|
|
qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
|
|
qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
|
|
qcom,pad-drv-on = <0x4 0x4 0x4>; /* 10mA, 10mA, 10mA */
|
|
qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */
|
|
|
|
qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>;
|
|
qcom,sup-voltages = <2950 2950>;
|
|
|
|
qcom,xpc;
|
|
qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104";
|
|
qcom,current-limit = <600>;
|
|
|
|
#address-cells = <0>;
|
|
interrupt-parent = <&sdcc2>;
|
|
interrupts = <0 1 2>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0xffffffff>;
|
|
interrupt-map = <0 &intc 0 125 0
|
|
1 &intc 0 220 0
|
|
2 &msmgpio 38 0x3>;
|
|
interrupt-names = "core_irq", "bam_irq", "status_irq";
|
|
cd-gpios = <&msmgpio 38 0x1>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
&sdhc_2 {
|
|
vdd-supply = <&pm8226_l18>;
|
|
qcom,vdd-voltage-level = <2950000 2950000>;
|
|
qcom,vdd-current-level = <9000 800000>;
|
|
|
|
vdd-io-supply = <&pm8226_l21>;
|
|
qcom,vdd-io-always-on;
|
|
qcom,vdd-io-lpm-sup;
|
|
qcom,vdd-io-voltage-level = <1800000 2950000>;
|
|
qcom,vdd-io-current-level = <6 22000>;
|
|
|
|
qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
|
|
qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
|
|
qcom,pad-drv-on = <0x4 0x4 0x4>; /* 10mA, 10mA, 10mA */
|
|
qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */
|
|
|
|
qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>;
|
|
|
|
#address-cells = <0>;
|
|
interrupt-parent = <&sdhc_2>;
|
|
interrupts = <0 1 2>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0xffffffff>;
|
|
interrupt-map = <0 &intc 0 125 0
|
|
1 &intc 0 221 0
|
|
2 &msmgpio 38 0x3>;
|
|
interrupt-names = "hc_irq", "pwr_irq", "status_irq";
|
|
cd-gpios = <&msmgpio 38 0x1>;
|
|
|
|
status = "ok";
|
|
};
|
|
|
|
&spmi_bus {
|
|
qcom,pm8226@0 {
|
|
qcom,leds@a100 {
|
|
status = "okay";
|
|
qcom,led_mpp_2 {
|
|
label = "mpp";
|
|
linux,name = "button-backlight";
|
|
linux,default-trigger = "none";
|
|
qcom,default-state = "off";
|
|
qcom,max-current = <40>;
|
|
qcom,current-setting = <5>;
|
|
qcom,id = <6>;
|
|
qcom,mode = "manual";
|
|
qcom,source-sel = <1>;
|
|
qcom,mode-ctrl = <0x60>;
|
|
};
|
|
};
|
|
|
|
qcom,leds@a300 {
|
|
status = "okay";
|
|
qcom,led_mpp_4 {
|
|
label = "mpp";
|
|
linux,name = "green";
|
|
linux,default-trigger = "none";
|
|
qcom,default-state = "off";
|
|
qcom,max-current = <40>;
|
|
qcom,current-setting = <5>;
|
|
qcom,id = <6>;
|
|
qcom,mode = "pwm";
|
|
qcom,pwm-us = <1000>;
|
|
qcom,source-sel = <8>;
|
|
qcom,mode-ctrl = <0x60>;
|
|
qcom,pwm-channel = <0>;
|
|
qcom,start-idx = <1>;
|
|
qcom,duty-pcts = [00 00 00 00 64
|
|
64 00 00 00 00];
|
|
qcom,use-blink;
|
|
};
|
|
};
|
|
|
|
qcom,leds@a500 {
|
|
status = "okay";
|
|
qcom,led_mpp_6 {
|
|
label = "mpp";
|
|
linux,name = "red";
|
|
linux,default-trigger = "none";
|
|
qcom,default-state = "off";
|
|
qcom,max-current = <40>;
|
|
qcom,current-setting = <5>;
|
|
qcom,id = <6>;
|
|
qcom,mode = "pwm";
|
|
qcom,pwm-us = <1000>;
|
|
qcom,mode-ctrl = <0x60>;
|
|
qcom,source-sel = <10>;
|
|
qcom,pwm-channel = <5>;
|
|
qcom,start-idx = <1>;
|
|
qcom,duty-pcts = [00 00 00 00 64
|
|
64 00 00 00 00];
|
|
qcom,use-blink;
|
|
};
|
|
};
|
|
};
|
|
|
|
qcom,pm8226@1 {
|
|
qcom,leds@d300 {
|
|
status = "okay";
|
|
};
|
|
|
|
qcom,leds@d800 {
|
|
status = "okay";
|
|
qcom,wled_0 {
|
|
label = "wled";
|
|
linux,name = "wled:backlight";
|
|
linux,default-trigger = "bkl-trigger";
|
|
qcom,cs-out-en;
|
|
qcom,op-fdbck = <1>;
|
|
qcom,default-state = "on";
|
|
qcom,max-current = <20>;
|
|
qcom,ctrl-delay-us = <0>;
|
|
qcom,boost-curr-lim = <3>;
|
|
qcom,cp-sel = <0>;
|
|
qcom,switch-freq = <2>;
|
|
qcom,ovp-val = <0>;
|
|
qcom,num-strings = <1>;
|
|
qcom,id = <0>;
|
|
};
|
|
};
|
|
|
|
qcom,vibrator@c000 {
|
|
status = "okay";
|
|
qcom,vib-timeout-ms = <15000>;
|
|
qcom,vib-vtg-level-mV = <3100>;
|
|
};
|
|
|
|
};
|
|
};
|
|
|
|
&pm8226_bms {
|
|
status = "okay";
|
|
qcom,batt-type = <4>;
|
|
qcom,max-voltage-uv = <4350000>;
|
|
};
|
|
|
|
&pm8226_chg {
|
|
status = "okay";
|
|
qcom,chg-vddmax-mv = <4350>;
|
|
qcom,chg-vddsafe-mv = <4350>;
|
|
};
|
|
|
|
&pm8226_gpios {
|
|
gpio@c000 { /* GPIO 1 */
|
|
/* XO_PMIC_CDC_MCLK enable for tapan codec */
|
|
qcom,mode = <1>; /* Digital output */
|
|
qcom,output-type = <0>; /* CMOS logic */
|
|
qcom,pull = <5>; /* QPNP_PIN_PULL_NO*/
|
|
qcom,vin-sel = <3>; /* QPNP_PIN_VIN3 */
|
|
qcom,out-strength = <3>;/* QPNP_PIN_OUT_STRENGTH_HIGH */
|
|
qcom,src-sel = <2>; /* QPNP_PIN_SEL_FUNC_1 */
|
|
qcom,master-en = <1>; /* Enable GPIO */
|
|
};
|
|
|
|
gpio@c100 { /* GPIO 2 */
|
|
qcom,mode = <1>;
|
|
qcom,output-type = <0>;
|
|
qcom,pull = <5>;
|
|
qcom,vin-sel = <3>;
|
|
qcom,out-strength = <3>;
|
|
qcom,src-sel = <2>;
|
|
qcom,master-en = <1>;
|
|
};
|
|
|
|
gpio@c200 { /* GPIO 3 */
|
|
};
|
|
|
|
gpio@c300 { /* GPIO 4 */
|
|
};
|
|
|
|
gpio@c400 { /* GPIO 5 */
|
|
};
|
|
|
|
gpio@c500 { /* GPIO 6 */
|
|
};
|
|
|
|
gpio@c600 { /* GPIO 7 */
|
|
};
|
|
|
|
gpio@c700 { /* GPIO 8 */
|
|
};
|
|
};
|
|
|
|
&pm8226_mpps {
|
|
mpp@a000 { /* MPP 1 */
|
|
};
|
|
|
|
mpp@a100 { /* MPP 2 */
|
|
};
|
|
|
|
mpp@a200 { /* MPP 3 */
|
|
};
|
|
|
|
mpp@a300 { /* MPP 4 */
|
|
};
|
|
|
|
mpp@a400 { /* MPP 5 */
|
|
};
|
|
|
|
mpp@a500 { /* MPP 6 */
|
|
};
|
|
|
|
mpp@a600 { /* MPP 7 */
|
|
};
|
|
|
|
mpp@a700 { /* MPP 8 */
|
|
};
|
|
};
|
|
|
|
&slim_msm {
|
|
tapan_codec {
|
|
qcom,cdc-micbias1-ext-cap;
|
|
};
|
|
|
|
};
|