207 lines
6.1 KiB
C
207 lines
6.1 KiB
C
/*
|
|
* Copyright (c) 2008, Google Inc.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* * Neither the name of Google, Inc. nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this
|
|
* software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
|
|
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <debug.h>
|
|
|
|
#include <platform/iomap.h>
|
|
#include <dev/uart.h>
|
|
#include <reg.h>
|
|
|
|
#define UART_MR1 0x0000
|
|
|
|
#define UART_MR1_AUTO_RFR_LEVEL0(n) (((n) & 0x3f) << 8)
|
|
#define UART_MR1_RX_RDY_CTL (1 << 7)
|
|
#define UART_MR1_CTS_CTL (1 << 6)
|
|
#define UART_MR1_AUTO_RFR_LEVEL1(n) ((n) & 0x3f)
|
|
|
|
#define UART_MR2 0x0004
|
|
#define UART_MR2_ERROR_MODE (1 << 6)
|
|
#define UART_MR2_BITS_PER_CHAR_5 (0 << 4)
|
|
#define UART_MR2_BITS_PER_CHAR_6 (1 << 4)
|
|
#define UART_MR2_BITS_PER_CHAR_7 (2 << 4)
|
|
#define UART_MR2_BITS_PER_CHAR_8 (3 << 4)
|
|
#define UART_MR2_STOP_BIT_LEN_0563 (0 << 2)
|
|
#define UART_MR2_STOP_BIT_LEN_1000 (1 << 2)
|
|
#define UART_MR2_STOP_BIT_LEN_1563 (2 << 2)
|
|
#define UART_MR2_STOP_BIT_LEN_2000 (3 << 2)
|
|
#define UART_MR2_PARITY_MODE_NONE (0)
|
|
#define UART_MR2_PARITY_MODE_ODD (1)
|
|
#define UART_MR2_PARITY_MODE_EVEN (2)
|
|
#define UART_MR2_PARITY_MODE_SPACE (3)
|
|
|
|
#define UART_CSR 0x0008
|
|
#define UART_CSR_115200 0xFF
|
|
#define UART_CSR_57600 0xEE
|
|
#define UART_CSR_38400 0xDD
|
|
#define UART_CSR_19200 0xBB
|
|
|
|
#define UART_TF 0x000C
|
|
|
|
#define UART_CR 0x0010
|
|
#define UART_CR_CMD_NULL (0 << 4)
|
|
#define UART_CR_CMD_RESET_RX (1 << 4)
|
|
#define UART_CR_CMD_RESET_TX (2 << 4)
|
|
#define UART_CR_CMD_RESET_ERR (3 << 4)
|
|
#define UART_CR_CMD_RESET_BCI (4 << 4)
|
|
#define UART_CR_CMD_START_BREAK (5 << 4)
|
|
#define UART_CR_CMD_STOP_BREAK (6 << 4)
|
|
#define UART_CR_CMD_RESET_CTS_N (7 << 4)
|
|
#define UART_CR_CMD_PACKET_MODE (9 << 4)
|
|
#define UART_CR_CMD_MODE_RESET (12<< 4)
|
|
#define UART_CR_CMD_SET_RFR_N (13<< 4)
|
|
#define UART_CR_CMD_RESET_RFR_ND (14<< 4)
|
|
#define UART_CR_TX_DISABLE (1 << 3)
|
|
#define UART_CR_TX_ENABLE (1 << 3)
|
|
#define UART_CR_RX_DISABLE (1 << 3)
|
|
#define UART_CR_RX_ENABLE (1 << 3)
|
|
|
|
#define UART_IMR 0x0014
|
|
#define UART_IMR_RXLEV (1 << 4)
|
|
#define UART_IMR_TXLEV (1 << 0)
|
|
|
|
#define UART_IPR 0x0018
|
|
#define UART_TFWR 0x001C
|
|
#define UART_RFWR 0x0020
|
|
#define UART_HCR 0x0024
|
|
|
|
#define UART_MREG 0x0028
|
|
#define UART_NREG 0x002C
|
|
#define UART_DREG 0x0030
|
|
#define UART_MNDREG 0x0034
|
|
#define UART_IRDA 0x0038
|
|
#define UART_MISR_MODE 0x0040
|
|
#define UART_MISR_RESET 0x0044
|
|
#define UART_MISR_EXPORT 0x0048
|
|
#define UART_MISR_VAL 0x004C
|
|
#define UART_TEST_CTRL 0x0050
|
|
|
|
#define UART_SR 0x0008
|
|
#define UART_SR_HUNT_CHAR (1 << 7)
|
|
#define UART_SR_RX_BREAK (1 << 6)
|
|
#define UART_SR_PAR_FRAME_ERR (1 << 5)
|
|
#define UART_SR_OVERRUN (1 << 4)
|
|
#define UART_SR_TX_EMPTY (1 << 3)
|
|
#define UART_SR_TX_READY (1 << 2)
|
|
#define UART_SR_RX_FULL (1 << 1)
|
|
#define UART_SR_RX_READY (1 << 0)
|
|
|
|
#define UART_RF 0x000C
|
|
#define UART_MISR 0x0010
|
|
#define UART_ISR 0x0014
|
|
|
|
static unsigned uart_ready = 0;
|
|
#if PLATFORM_MSM7X30
|
|
static unsigned uart_base = MSM_UART2_BASE;
|
|
#elif PLATFORM_MSM7X27A
|
|
static unsigned uart_base = MSM_UART1_BASE;
|
|
#else
|
|
static unsigned uart_base = MSM_UART3_BASE;
|
|
#endif
|
|
|
|
#define uwr(v,a) writel(v, uart_base + (a))
|
|
#define urd(a) readl(uart_base + (a))
|
|
|
|
void uart_init(void)
|
|
{
|
|
uwr(0x0A, UART_CR); /* disable TX and RX */
|
|
|
|
uwr(0x30, UART_CR); /* reset error status */
|
|
uwr(0x10, UART_CR); /* reset receiver */
|
|
uwr(0x20, UART_CR); /* reset transmitter */
|
|
|
|
#if PLATFORM_QSD8K || PLATFORM_MSM7X30 || PLATFORM_MSM7X27A
|
|
/* TCXO */
|
|
uwr(0x06, UART_MREG);
|
|
uwr(0xF1, UART_NREG);
|
|
uwr(0x0F, UART_DREG);
|
|
uwr(0x1A, UART_MNDREG);
|
|
#else
|
|
/* TCXO/4 */
|
|
uwr(0xC0, UART_MREG);
|
|
uwr(0xAF, UART_NREG);
|
|
uwr(0x80, UART_DREG);
|
|
uwr(0x19, UART_MNDREG);
|
|
#endif
|
|
|
|
uwr(0x10, UART_CR); /* reset RX */
|
|
uwr(0x20, UART_CR); /* reset TX */
|
|
uwr(0x30, UART_CR); /* reset error status */
|
|
uwr(0x40, UART_CR); /* reset RX break */
|
|
uwr(0x70, UART_CR); /* rest? */
|
|
uwr(0xD0, UART_CR); /* reset */
|
|
|
|
uwr(0x7BF, UART_IPR); /* stale timeout = 630 * bitrate */
|
|
uwr(0, UART_IMR);
|
|
uwr(115, UART_RFWR); /* RX watermark = 58 * 2 - 1 */
|
|
uwr(10, UART_TFWR); /* TX watermark */
|
|
|
|
uwr(0, UART_RFWR);
|
|
|
|
uwr(UART_CSR_115200, UART_CSR);
|
|
uwr(0, UART_IRDA);
|
|
uwr(0x1E, UART_HCR);
|
|
// uwr(0x7F4, UART_MR1); /* RFS/ CTS/ 500chr RFR */
|
|
uwr(16, UART_MR1);
|
|
uwr(0x34, UART_MR2); /* 8N1 */
|
|
|
|
uwr(0x05, UART_CR); /* enable TX & RX */
|
|
|
|
uart_ready = 1;
|
|
}
|
|
|
|
static int _uart_putc(int port, char c)
|
|
{
|
|
if (!uart_ready)
|
|
return -1;
|
|
while (!(urd(UART_SR) & UART_SR_TX_READY)) ;
|
|
uwr(c, UART_TF);
|
|
return 0;
|
|
}
|
|
|
|
int uart_putc(int port, char c)
|
|
{
|
|
if (c == '\n') {
|
|
_uart_putc(0, '\r');
|
|
}
|
|
_uart_putc(0, c);
|
|
}
|
|
|
|
int uart_getc(int port, bool wait)
|
|
{
|
|
if (!uart_ready)
|
|
return -1;
|
|
while (!(urd(UART_SR) & UART_SR_RX_READY))
|
|
if (!wait)
|
|
return -1;
|
|
|
|
return urd(UART_RF);
|
|
}
|