619 lines
19 KiB
Plaintext
619 lines
19 KiB
Plaintext
menuconfig POWER_SUPPLY
|
|
bool "Power supply class support"
|
|
help
|
|
Say Y here to enable power supply class support. This allows
|
|
power supply (batteries, AC, USB) monitoring by userspace
|
|
via sysfs and uevent (if available) and/or APM kernel interface
|
|
(if selected below).
|
|
|
|
if POWER_SUPPLY
|
|
|
|
config POWER_SUPPLY_DEBUG
|
|
bool "Power supply debug"
|
|
help
|
|
Say Y here to enable debugging messages for power supply class
|
|
and drivers.
|
|
|
|
config PDA_POWER
|
|
tristate "Generic PDA/phone power driver"
|
|
depends on !S390
|
|
help
|
|
Say Y here to enable generic power driver for PDAs and phones with
|
|
one or two external power supplies (AC/USB) connected to main and
|
|
backup batteries, and optional builtin charger.
|
|
|
|
config APM_POWER
|
|
tristate "APM emulation for class batteries"
|
|
depends on APM_EMULATION
|
|
help
|
|
Say Y here to enable support APM status emulation using
|
|
battery class devices.
|
|
|
|
config GENERIC_ADC_BATTERY
|
|
tristate "Generic battery support using IIO"
|
|
depends on IIO
|
|
help
|
|
Say Y here to enable support for the generic battery driver
|
|
which uses IIO framework to read adc.
|
|
|
|
config MAX8925_POWER
|
|
tristate "MAX8925 battery charger support"
|
|
depends on MFD_MAX8925
|
|
help
|
|
Say Y here to enable support for the battery charger in the Maxim
|
|
MAX8925 PMIC.
|
|
|
|
config WM831X_BACKUP
|
|
tristate "WM831X backup battery charger support"
|
|
depends on MFD_WM831X
|
|
help
|
|
Say Y here to enable support for the backup battery charger
|
|
in the Wolfson Microelectronics WM831x PMICs.
|
|
|
|
config WM831X_POWER
|
|
tristate "WM831X PMU support"
|
|
depends on MFD_WM831X
|
|
help
|
|
Say Y here to enable support for the power management unit
|
|
provided by Wolfson Microelectronics WM831x PMICs.
|
|
|
|
config WM8350_POWER
|
|
tristate "WM8350 PMU support"
|
|
depends on MFD_WM8350
|
|
help
|
|
Say Y here to enable support for the power management unit
|
|
provided by the Wolfson Microelectronics WM8350 PMIC.
|
|
|
|
config TEST_POWER
|
|
tristate "Test power driver"
|
|
help
|
|
This driver is used for testing. It's safe to say M here.
|
|
|
|
config BATTERY_88PM860X
|
|
tristate "Marvell 88PM860x battery driver"
|
|
depends on MFD_88PM860X
|
|
help
|
|
Say Y here to enable battery monitor for Marvell 88PM860x chip.
|
|
|
|
config BATTERY_DS2760
|
|
tristate "DS2760 battery driver (HP iPAQ & others)"
|
|
depends on W1 && W1_SLAVE_DS2760
|
|
help
|
|
Say Y here to enable support for batteries with ds2760 chip.
|
|
|
|
config BATTERY_DS2780
|
|
tristate "DS2780 battery driver"
|
|
depends on HAS_IOMEM
|
|
select W1
|
|
select W1_SLAVE_DS2780
|
|
help
|
|
Say Y here to enable support for batteries with ds2780 chip.
|
|
|
|
config BATTERY_DS2781
|
|
tristate "DS2781 battery driver"
|
|
depends on HAS_IOMEM
|
|
select W1
|
|
select W1_SLAVE_DS2781
|
|
help
|
|
If you enable this you will have the DS2781 battery driver support.
|
|
|
|
The battery monitor chip is used in many batteries/devices
|
|
as the one who is responsible for charging/discharging/monitoring
|
|
Li+ batteries.
|
|
|
|
If you are unsure, say N.
|
|
|
|
config BATTERY_DS2782
|
|
tristate "DS2782/DS2786 standalone gas-gauge"
|
|
depends on I2C
|
|
help
|
|
Say Y here to enable support for the DS2782/DS2786 standalone battery
|
|
gas-gauge.
|
|
|
|
config BATTERY_PMU
|
|
tristate "Apple PMU battery"
|
|
depends on PPC32 && ADB_PMU
|
|
help
|
|
Say Y here to expose battery information on Apple machines
|
|
through the generic battery class.
|
|
|
|
config BATTERY_OLPC
|
|
tristate "One Laptop Per Child battery"
|
|
depends on X86_32 && OLPC
|
|
help
|
|
Say Y to enable support for the battery on the OLPC laptop.
|
|
|
|
config BATTERY_TOSA
|
|
tristate "Sharp SL-6000 (tosa) battery"
|
|
depends on MACH_TOSA && MFD_TC6393XB && TOUCHSCREEN_WM97XX
|
|
help
|
|
Say Y to enable support for the battery on the Sharp Zaurus
|
|
SL-6000 (tosa) models.
|
|
|
|
config BATTERY_COLLIE
|
|
tristate "Sharp SL-5500 (collie) battery"
|
|
depends on SA1100_COLLIE && MCP_UCB1200
|
|
help
|
|
Say Y to enable support for the battery on the Sharp Zaurus
|
|
SL-5500 (collie) models.
|
|
|
|
config BATTERY_IPAQ_MICRO
|
|
tristate "iPAQ Atmel Micro ASIC battery driver"
|
|
depends on MFD_IPAQ_MICRO
|
|
help
|
|
Choose this option if you want to monitor battery status on
|
|
Compaq/HP iPAQ h3100 and h3600.
|
|
|
|
config BATTERY_WM97XX
|
|
bool "WM97xx generic battery driver"
|
|
depends on TOUCHSCREEN_WM97XX=y
|
|
help
|
|
Say Y to enable support for battery measured by WM97xx aux port.
|
|
|
|
config BATTERY_SBS
|
|
tristate "SBS Compliant gas gauge"
|
|
depends on I2C
|
|
help
|
|
Say Y to include support for SBS battery driver for SBS-compliant
|
|
gas gauges.
|
|
|
|
config BATTERY_BQ27x00
|
|
tristate "BQ27x00 battery driver"
|
|
depends on I2C || I2C=n
|
|
help
|
|
Say Y here to enable support for batteries with BQ27x00 (I2C/HDQ) chips.
|
|
|
|
config BATTERY_BQ27X00_I2C
|
|
bool "BQ27200/BQ27500 support"
|
|
depends on BATTERY_BQ27x00
|
|
depends on I2C
|
|
default y
|
|
help
|
|
Say Y here to enable support for batteries with BQ27x00 (I2C) chips.
|
|
|
|
config BATTERY_BQ27X00_PLATFORM
|
|
bool "BQ27000 support"
|
|
depends on BATTERY_BQ27x00
|
|
default y
|
|
help
|
|
Say Y here to enable support for batteries with BQ27000 (HDQ) chips.
|
|
|
|
config BATTERY_DA9030
|
|
tristate "DA9030 battery driver"
|
|
depends on PMIC_DA903X
|
|
help
|
|
Say Y here to enable support for batteries charger integrated into
|
|
DA9030 PMIC.
|
|
|
|
config BATTERY_DA9052
|
|
tristate "Dialog DA9052 Battery"
|
|
depends on PMIC_DA9052
|
|
help
|
|
Say Y here to enable support for batteries charger integrated into
|
|
DA9052 PMIC.
|
|
|
|
config BATTERY_MAX17040
|
|
tristate "Maxim MAX17040 Fuel Gauge"
|
|
depends on I2C
|
|
help
|
|
MAX17040 is fuel-gauge systems for lithium-ion (Li+) batteries
|
|
in handheld and portable equipment. The MAX17040 is configured
|
|
to operate with a single lithium cell
|
|
|
|
config BATTERY_MAX17042
|
|
tristate "Maxim MAX17042/17047/17050/8997/8966 Fuel Gauge"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
MAX17042 is fuel-gauge systems for lithium-ion (Li+) batteries
|
|
in handheld and portable equipment. The MAX17042 is configured
|
|
to operate with a single lithium cell. MAX8997 and MAX8966 are
|
|
multi-function devices that include fuel gauages that are compatible
|
|
with MAX17042. This driver also supports max17047/50 chips which are
|
|
improved version of max17042.
|
|
|
|
config BATTERY_Z2
|
|
tristate "Z2 battery driver"
|
|
depends on I2C && MACH_ZIPIT2
|
|
help
|
|
Say Y to include support for the battery on the Zipit Z2.
|
|
|
|
config BATTERY_S3C_ADC
|
|
tristate "Battery driver for Samsung ADC based monitoring"
|
|
depends on S3C_ADC
|
|
help
|
|
Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery
|
|
|
|
config BATTERY_TWL4030_MADC
|
|
tristate "TWL4030 MADC battery driver"
|
|
depends on TWL4030_MADC
|
|
help
|
|
Say Y here to enable this dumb driver for batteries managed
|
|
through the TWL4030 MADC.
|
|
|
|
config CHARGER_88PM860X
|
|
tristate "Marvell 88PM860x Charger driver"
|
|
depends on MFD_88PM860X && BATTERY_88PM860X
|
|
help
|
|
Say Y here to enable charger for Marvell 88PM860x chip.
|
|
|
|
config MP2617_CHARGER
|
|
tristate "Summit MP2617 Battery Charger"
|
|
help
|
|
The MP2617 charger chip is a charging solution. This driver supports
|
|
enabling and disabling charging, setting the input current limit.
|
|
|
|
config BQ25601_CHARGER
|
|
tristate "TI BQ25601 Battery Charger"
|
|
help
|
|
The BQ25601 device is a highly-integrated 3-A switch-mode battery charge
|
|
management and system power path management device for single cell Li-Ion
|
|
and Li-polymer battery. The low impedance power path optimizes switch-mode
|
|
operation efficiency, reduces battery charging time and extends battery
|
|
life during discharging phase.
|
|
|
|
config CHARGER_PCF50633
|
|
tristate "NXP PCF50633 MBC"
|
|
depends on MFD_PCF50633
|
|
help
|
|
Say Y to include support for NXP PCF50633 Main Battery Charger.
|
|
|
|
config BATTERY_JZ4740
|
|
tristate "Ingenic JZ4740 battery"
|
|
depends on MACH_JZ4740
|
|
depends on MFD_JZ4740_ADC
|
|
help
|
|
Say Y to enable support for the battery on Ingenic JZ4740 based
|
|
boards.
|
|
|
|
This driver can be build as a module. If so, the module will be
|
|
called jz4740-battery.
|
|
|
|
config BATTERY_INTEL_MID
|
|
tristate "Battery driver for Intel MID platforms"
|
|
depends on INTEL_SCU_IPC && SPI
|
|
help
|
|
Say Y here to enable the battery driver on Intel MID
|
|
platforms.
|
|
|
|
config BATTERY_RX51
|
|
tristate "Nokia RX-51 (N900) battery driver"
|
|
depends on TWL4030_MADC
|
|
help
|
|
Say Y here to enable support for battery information on Nokia
|
|
RX-51, also known as N900 tablet.
|
|
|
|
config CHARGER_ISP1704
|
|
tristate "ISP1704 USB Charger Detection"
|
|
depends on USB_PHY
|
|
help
|
|
Say Y to enable support for USB Charger Detection with
|
|
ISP1707/ISP1704 USB transceivers.
|
|
|
|
config CHARGER_MAX8903
|
|
tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power"
|
|
help
|
|
Say Y to enable support for the MAX8903 DC-DC charger and sysfs.
|
|
The driver supports controlling charger-enable and current-limit
|
|
pins based on the status of charger connections with interrupt
|
|
handlers.
|
|
|
|
config CHARGER_TWL4030
|
|
tristate "OMAP TWL4030 BCI charger driver"
|
|
depends on TWL4030_CORE
|
|
help
|
|
Say Y here to enable support for TWL4030 Battery Charge Interface.
|
|
|
|
config CHARGER_LP8727
|
|
tristate "TI/National Semiconductor LP8727 charger driver"
|
|
depends on I2C
|
|
help
|
|
Say Y here to enable support for LP8727 Charger Driver.
|
|
|
|
config CHARGER_LP8788
|
|
tristate "TI LP8788 charger driver"
|
|
depends on MFD_LP8788
|
|
depends on LP8788_ADC
|
|
depends on IIO
|
|
help
|
|
Say Y to enable support for the LP8788 linear charger.
|
|
|
|
config CHARGER_GPIO
|
|
tristate "GPIO charger"
|
|
depends on GPIOLIB
|
|
help
|
|
Say Y to include support for chargers which report their online status
|
|
through a GPIO pin.
|
|
|
|
This driver can be build as a module. If so, the module will be
|
|
called gpio-charger.
|
|
|
|
config CHARGER_MANAGER
|
|
bool "Battery charger manager for multiple chargers"
|
|
depends on REGULATOR && RTC_CLASS
|
|
select EXTCON
|
|
help
|
|
Say Y to enable charger-manager support, which allows multiple
|
|
chargers attached to a battery and multiple batteries attached to a
|
|
system. The charger-manager also can monitor charging status in
|
|
runtime and in suspend-to-RAM by waking up the system periodically
|
|
with help of suspend_again support.
|
|
|
|
config CHARGER_MAX14577
|
|
tristate "Maxim MAX14577/77836 battery charger driver"
|
|
depends on MFD_MAX14577
|
|
depends on SYSFS
|
|
help
|
|
Say Y to enable support for the battery charger control sysfs and
|
|
platform data of MAX14577/77836 MUICs.
|
|
|
|
config CHARGER_MAX8997
|
|
tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver"
|
|
depends on MFD_MAX8997 && REGULATOR_MAX8997
|
|
help
|
|
Say Y to enable support for the battery charger control sysfs and
|
|
platform data of MAX8997/LP3974 PMICs.
|
|
|
|
config CHARGER_MAX8998
|
|
tristate "Maxim MAX8998/LP3974 PMIC battery charger driver"
|
|
depends on MFD_MAX8998 && REGULATOR_MAX8998
|
|
help
|
|
Say Y to enable support for the battery charger control sysfs and
|
|
platform data of MAX8998/LP3974 PMICs.
|
|
|
|
config CHARGER_BQ2415X
|
|
tristate "TI BQ2415x battery charger driver"
|
|
depends on I2C
|
|
help
|
|
Say Y to enable support for the TI BQ2415x battery charger
|
|
PMICs.
|
|
|
|
You'll need this driver to charge batteries on e.g. Nokia
|
|
RX-51/N900.
|
|
|
|
config CHARGER_BQ24190
|
|
tristate "TI BQ24190 battery charger driver"
|
|
depends on I2C && GPIOLIB
|
|
help
|
|
Say Y to enable support for the TI BQ24190 battery charger.
|
|
|
|
config CHARGER_BQ24735
|
|
tristate "TI BQ24735 battery charger support"
|
|
depends on I2C && GPIOLIB
|
|
help
|
|
Say Y to enable support for the TI BQ24735 battery charger.
|
|
|
|
config CHARGER_SMB347
|
|
tristate "Summit Microelectronics SMB347 Battery Charger"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
Say Y to include support for Summit Microelectronics SMB347
|
|
Battery Charger.
|
|
|
|
config SMB349_USB_CHARGER
|
|
tristate "smb349 usb charger (with VBUS detection)"
|
|
depends on I2C
|
|
help
|
|
Say Y to enable support for the SMB349 switching mode based charger.
|
|
The driver supports charging control (enable/disable) and
|
|
charge-current limiting. It also provides USB VBUS detection and
|
|
notification support. The driver controls SMB349 via I2C and
|
|
supports device-tree interface.
|
|
|
|
config SMB349_DUAL_CHARGER
|
|
tristate "smb349 dual charger"
|
|
depends on I2C
|
|
help
|
|
Say Y to enable support for the SMB349 dual charger single path
|
|
switching mode charger. The driver supports charging in conjuction
|
|
with an external charger on the same path by providing hand-off
|
|
control and charge-current limiting. The driver controls SMB349
|
|
via I2C in STAT IRQ driven mode and supports device-tree interface.
|
|
|
|
config SMB1351_USB_CHARGER
|
|
tristate "smb1351 usb charger (with VBUS detection)"
|
|
depends on I2C
|
|
help
|
|
Say Y to enable support for the SMB1351 switching mode based charger.
|
|
The driver supports charging control (enable/disable) and
|
|
charge-current limiting. It also provides USB VBUS detection and
|
|
notification support. The driver controls SMB1351 via I2C and
|
|
supports device-tree interface.
|
|
|
|
config SMB350_CHARGER
|
|
tristate "smb350 charger"
|
|
depends on I2C
|
|
help
|
|
Say Y to enable battery charging by SMB350 switching mode based
|
|
external charger. The device supports stack-cell battery charging.
|
|
The driver configures the device volatile parameters
|
|
and the charger device works autonomously.
|
|
The driver supports charger-enable and charger-suspend/resume.
|
|
The driver reports the charger status via the power supply framework.
|
|
A charger status change triggers an IRQ via the device STAT pin.
|
|
|
|
config SMB135X_CHARGER
|
|
tristate "SMB135X Battery Charger"
|
|
depends on I2C
|
|
help
|
|
Say Y to include support for SMB135X Battery Charger.
|
|
SMB135X is a dual path switching mode charger capable of charging
|
|
the battery with 3Amps of current.
|
|
The driver supports charger enable/disable.
|
|
The driver reports the charger status via the power supply framework.
|
|
A charger status change triggers an IRQ via the device STAT pin.
|
|
|
|
config SMB1360_CHARGER_FG
|
|
tristate "SMB1360 Charger and Fuel Guage"
|
|
depends on I2C
|
|
help
|
|
Say Y to include support for SMB1360 Charger and Fuel Guage.
|
|
SMB1360 is a single path switching mode charger capable of charging
|
|
the battery with 1.5Amps of current. It supports a fuel gauge which
|
|
uses voltage and coloumb counting for state of charge reporting.
|
|
The driver reports the status via the power supply framework.
|
|
A status change triggers an IRQ via the device STAT pin.
|
|
|
|
config SMB358_CHARGER
|
|
tristate "SMB358 Battery Charger"
|
|
depends on I2C
|
|
help
|
|
Say Y to include support for SMB358 Battery Charger.
|
|
SMB358 is a single path switching mode charger capable of charging
|
|
the battery with 2Amps of current.
|
|
The driver supports charger enable/disable.
|
|
The driver reports the charger status via the power supply framework.
|
|
A charger status change triggers an IRQ via the device STAT pin.
|
|
|
|
config SMB23X_CHARGER
|
|
tristate "SMB23X Battery Charger"
|
|
depends on I2C
|
|
help
|
|
Say Y to include support for SMB23X Battery Charger.
|
|
SMB23X is a single path linear charger capable of charging
|
|
the battery with 1Amps of current.
|
|
The driver supports charger enable/disable.
|
|
The driver reports the charger status via the power supply framework.
|
|
A charger status change triggers an IRQ via the device STAT pin.
|
|
|
|
config BATTERY_BQ28400
|
|
tristate "BQ28400 battery driver"
|
|
depends on I2C
|
|
default n
|
|
help
|
|
Say Y here to enable support for batteries with BQ28400 (I2C) chips.
|
|
The bq28400 Texas Instruments Inc device monitors the battery
|
|
charging/discharging status via Rsens resistor, typically 10 mohm.
|
|
It monitors the battery temperature via Thermistor.
|
|
The device monitors the battery level (Relative-State-Of-Charge).
|
|
The device is SBS compliant, providing battery info over I2C.
|
|
|
|
config QPNP_CHARGER
|
|
tristate "QPNP Charger driver"
|
|
depends on SPMI || MSM_SPMI
|
|
depends on OF_SPMI
|
|
depends on THERMAL_QPNP_ADC_TM
|
|
help
|
|
Say Y here to enable the switch mode battery charger
|
|
and boost device which supports USB detection and charging. The driver
|
|
also offers relevant information to userspace via the power supply
|
|
framework.
|
|
|
|
config QPNP_SMBCHARGER
|
|
tristate "QPNP SMB Charger driver"
|
|
depends on SPMI || MSM_SPMI
|
|
depends on OF_SPMI
|
|
help
|
|
Say Y here to enable the dual path switch mode battery charger which
|
|
supports USB detection and battery charging up to 3A.
|
|
The driver also offers relevant information to userspace via the
|
|
power supply framework.
|
|
|
|
config QPNP_FG
|
|
tristate "QPNP fuel gauge driver"
|
|
depends on SPMI || MSM_SPMI
|
|
depends on OF_SPMI
|
|
help
|
|
Say Y here to enable the Fuel Gauge driver. This adds support for
|
|
battery fuel gauging and state of charge of battery connected to the
|
|
fuel gauge. The state of charge is reported through a BMS power
|
|
supply property and also sends uevents when the capacity is updated.
|
|
|
|
config BATTERY_BCL
|
|
tristate "Battery Current Limit driver"
|
|
depends on THERMAL_MONITOR
|
|
help
|
|
Say Y here to enable support for battery current limit
|
|
device. The BCL driver will poll BMS if
|
|
thermal daemon enables BCL.
|
|
It will notify thermal daemon if IBat crosses Imax threshold.
|
|
|
|
config CHARGER_TPS65090
|
|
tristate "TPS65090 battery charger driver"
|
|
depends on MFD_TPS65090
|
|
help
|
|
Say Y here to enable support for battery charging with TPS65090
|
|
PMIC chips.
|
|
|
|
config AB8500_BM
|
|
bool "AB8500 Battery Management Driver"
|
|
depends on AB8500_CORE && AB8500_GPADC
|
|
help
|
|
Say Y to include support for AB8500 battery management.
|
|
|
|
config BATTERY_GOLDFISH
|
|
tristate "Goldfish battery driver"
|
|
depends on GOLDFISH || COMPILE_TEST
|
|
depends on HAS_IOMEM
|
|
help
|
|
Say Y to enable support for the battery and AC power in the
|
|
Goldfish emulator.
|
|
|
|
config QPNP_VM_BMS
|
|
tristate "QPNP Voltage-Mode Battery Monitoring System driver"
|
|
depends on SPMI || MSM_SPMI
|
|
depends on MSM_QPNP_INT
|
|
help
|
|
Say Y here to enable support for QPNP chip vm-bms device.
|
|
The voltage-mode (vm) BMS driver uses periodic VBATT
|
|
readings from the battery to calculate the State of
|
|
Charge.
|
|
|
|
config QPNP_BMS
|
|
tristate "QPNP Battery Monitoring System driver"
|
|
depends on SPMI || MSM_SPMI
|
|
depends on MSM_QPNP_INT
|
|
help
|
|
Say Y here to enable support for QPNP chip bms device.
|
|
It registers a fuelgauge bms power supply to report
|
|
State of Charge.
|
|
|
|
config QPNP_LINEAR_CHARGER
|
|
tristate "QPNP Linear Charger driver"
|
|
depends on SPMI || MSM_SPMI
|
|
depends on OF_SPMI
|
|
depends on MSM_QPNP_INT
|
|
depends on THERMAL_QPNP_ADC_TM
|
|
help
|
|
Say Y here to enable the Linear battery charger which supports USB
|
|
detection and charging. The driver also offers relevant information
|
|
to userspace via the power supply framework.
|
|
|
|
config QPNP_TYPEC
|
|
tristate "QPNP Type-C driver"
|
|
depends on SPMI || MSM_SPMI
|
|
depends on OF_SPMI
|
|
depends on MSM_QPNP_INT
|
|
help
|
|
Say Y here to enable QPNP Type-C driver.
|
|
The QPNP Type-C module supports the USB type-C protocol. It supports type-C
|
|
cable detection and other type-C parameters such as current-capability and
|
|
CC-orientation. The module does not support USB power-delivery. The driver
|
|
adds support to report these type-C parameters via the power-supply
|
|
framework.
|
|
|
|
config MSM_BCL_CTL
|
|
bool "BCL Framework driver"
|
|
help
|
|
Say Y here to enable this BCL Framework driver. This driver provides
|
|
interface, which can be used by the BCL h/w drivers to implement the
|
|
basic functionalities. This framework abstracts the underlying
|
|
hardware for the top level modules.
|
|
|
|
config MSM_BCL_PERIPHERAL_CTL
|
|
bool "BCL driver to control the PMIC BCL peripheral"
|
|
depends on SPMI || MSM_SPMI
|
|
depends on MSM_BCL_CTL
|
|
help
|
|
Say Y here to enable this BCL PMIC peripheral driver. This driver
|
|
provides routines to configure and monitor the BCL
|
|
PMIC peripheral.
|
|
|
|
source "drivers/power/reset/Kconfig"
|
|
|
|
endif # POWER_SUPPLY
|
|
|
|
source "drivers/power/avs/Kconfig"
|
|
source "drivers/power/qcom/Kconfig"
|