M7350/kernel/drivers/input/touchscreen/ft5x06_ts.c
2024-09-09 08:57:42 +00:00

2477 lines
63 KiB
C

/*
*
* FocalTech ft5x06 TouchScreen driver.
*
* Copyright (c) 2010 Focal tech Ltd.
* Copyright (c) 2012-2015, The Linux Foundation. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/input/mt.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/gpio.h>
#include <linux/of_gpio.h>
#include <linux/regulator/consumer.h>
#include <linux/firmware.h>
#include <linux/debugfs.h>
#include <linux/input/ft5x06_ts.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/uaccess.h>
#include <linux/kobject.h>
#include <linux/sysfs.h>
#if defined(CONFIG_FB)
#include <linux/notifier.h>
#include <linux/fb.h>
#elif defined(CONFIG_HAS_EARLYSUSPEND)
#include <linux/earlysuspend.h>
/* Early-suspend level */
#define FT_SUSPEND_LEVEL 1
#endif
#define FT_DRIVER_VERSION 0x02
#define FT_META_REGS 3
#define FT_ONE_TCH_LEN 6
#define FT_TCH_LEN(x) (FT_META_REGS + FT_ONE_TCH_LEN * x)
#define FT_PRESS 0x7F
#define FT_MAX_ID 0x0F
#define FT_TOUCH_X_H_POS 3
#define FT_TOUCH_X_L_POS 4
#define FT_TOUCH_Y_H_POS 5
#define FT_TOUCH_Y_L_POS 6
#define FT_TD_STATUS 2
#define FT_TOUCH_EVENT_POS 3
#define FT_TOUCH_ID_POS 5
#define FT_TOUCH_DOWN 0
#define FT_TOUCH_CONTACT 2
/* register address*/
#define FT_REG_DEV_MODE 0x00
#define FT_DEV_MODE_REG_CAL 0x02
#define FT_REG_ID 0xA3
#define FT_REG_PMODE 0xA5
#define FT_REG_FW_VER 0xA6
#define FT_REG_FW_VENDOR_ID 0xA8
#define FT_REG_POINT_RATE 0x88
#define FT_REG_THGROUP 0x80
#define FT_REG_ECC 0xCC
#define FT_REG_RESET_FW 0x07
#define FT_REG_FW_MIN_VER 0xB2
#define FT_REG_FW_SUB_MIN_VER 0xB3
/* gesture register address*/
#define FT_REG_GESTURE_ENABLE 0xD0
#define FT_REG_GESTURE_OUTPUT 0xD3
/* gesture register bits*/
#define FT_GESTURE_DOUBLECLICK_COORD_X 100
#define FT_GESTURE_DOUBLECLICK_COORD_Y 100
#define FT_GESTURE_WAKEUP_TIMEOUT 500
#define FT_GESTURE_DEFAULT_TRACKING_ID 0x0A
#define FT_GESTURE_DOUBLECLICK_ID 0x24
#define FT_GESTURE_POINTER_NUM_MAX 128
#define FT_GESTURE_POINTER_SIZEOF 4
#define FT_GESTURE_ID_FLAG_SIZE 1
#define FT_GESTURE_POINTER_NUM_FLAG_SIZE 1
/* 6 bytes are taken to mark which gesture is supported in firmware */
#define FT_GESTURE_SET_FLAG_SIZE 6
#define I2C_TRANSFER_MAX_BYTE 255
#define FT_GESTURE_DATA_HEADER (FT_GESTURE_ID_FLAG_SIZE + \
FT_GESTURE_POINTER_NUM_FLAG_SIZE + \
FT_GESTURE_SET_FLAG_SIZE)
/* power register bits*/
#define FT_PMODE_ACTIVE 0x00
#define FT_PMODE_MONITOR 0x01
#define FT_PMODE_STANDBY 0x02
#define FT_PMODE_HIBERNATE 0x03
#define FT_FACTORYMODE_VALUE 0x40
#define FT_WORKMODE_VALUE 0x00
#define FT_RST_CMD_REG1 0xFC
#define FT_RST_CMD_REG2 0xBC
#define FT_READ_ID_REG 0x90
#define FT_ERASE_APP_REG 0x61
#define FT_ERASE_PANEL_REG 0x63
#define FT_FW_START_REG 0xBF
#define FT_STATUS_NUM_TP_MASK 0x0F
#define FT_VTG_MIN_UV 2600000
#define FT_VTG_MAX_UV 3300000
#define FT_I2C_VTG_MIN_UV 1800000
#define FT_I2C_VTG_MAX_UV 1800000
#define FT_COORDS_ARR_SIZE 4
#define MAX_BUTTONS 4
#define FT_8BIT_SHIFT 8
#define FT_4BIT_SHIFT 4
#define FT_FW_NAME_MAX_LEN 50
#define FT5316_ID 0x0A
#define FT5306I_ID 0x55
#define FT6X06_ID 0x06
#define FT6X36_ID 0x36
#define FT_UPGRADE_AA 0xAA
#define FT_UPGRADE_55 0x55
#define FT_FW_MIN_SIZE 8
#define FT_FW_MAX_SIZE 32768
/* Firmware file is not supporting minor and sub minor so use 0 */
#define FT_FW_FILE_MAJ_VER(x) ((x)->data[(x)->size - 2])
#define FT_FW_FILE_MIN_VER(x) 0
#define FT_FW_FILE_SUB_MIN_VER(x) 0
#define FT_FW_FILE_VENDOR_ID(x) ((x)->data[(x)->size - 1])
#define FT_FW_FILE_MAJ_VER_FT6X36(x) ((x)->data[0x10a])
#define FT_FW_FILE_VENDOR_ID_FT6X36(x) ((x)->data[0x108])
#define FT_SYSFS_TS_INFO "ts_info"
/**
* Application data verification will be run before upgrade flow.
* Firmware image stores some flags with negative and positive value
* in corresponding addresses, we need pick them out do some check to
* make sure the application data is valid.
*/
#define FT_FW_CHECK(x, ts_data) \
(ts_data->family_id == FT6X36_ID ? \
(((x)->data[0x104] ^ (x)->data[0x105]) == 0xFF \
&& ((x)->data[0x106] ^ (x)->data[0x107]) == 0xFF) : \
(((x)->data[(x)->size - 8] ^ (x)->data[(x)->size - 6]) == 0xFF \
&& ((x)->data[(x)->size - 7] ^ (x)->data[(x)->size - 5]) == 0xFF \
&& ((x)->data[(x)->size - 3] ^ (x)->data[(x)->size - 4]) == 0xFF))
#define FT_MAX_TRIES 5
#define FT_RETRY_DLY 20
#define FT_MAX_WR_BUF 10
#define FT_MAX_RD_BUF 2
#define FT_FW_PKT_LEN 128
#define FT_FW_PKT_META_LEN 6
#define FT_FW_PKT_DLY_MS 20
#define FT_FW_LAST_PKT 0x6ffa
#define FT_EARSE_DLY_MS 100
#define FT_55_AA_DLY_NS 5000
#define FT_UPGRADE_LOOP 30
#define FT_CAL_START 0x04
#define FT_CAL_FIN 0x00
#define FT_CAL_STORE 0x05
#define FT_CAL_RETRY 100
#define FT_REG_CAL 0x00
#define FT_CAL_MASK 0x70
#define FT_INFO_MAX_LEN 512
#define FT_BLOADER_SIZE_OFF 12
#define FT_BLOADER_NEW_SIZE 30
#define FT_DATA_LEN_OFF_OLD_FW 8
#define FT_DATA_LEN_OFF_NEW_FW 14
#define FT_FINISHING_PKT_LEN_OLD_FW 6
#define FT_FINISHING_PKT_LEN_NEW_FW 12
#define FT_MAGIC_BLOADER_Z7 0x7bfa
#define FT_MAGIC_BLOADER_LZ4 0x6ffa
#define FT_MAGIC_BLOADER_GZF_30 0x7ff4
#define FT_MAGIC_BLOADER_GZF 0x7bf4
#define PINCTRL_STATE_ACTIVE "pmx_ts_active"
#define PINCTRL_STATE_SUSPEND "pmx_ts_suspend"
#define PINCTRL_STATE_RELEASE "pmx_ts_release"
enum {
FT_BLOADER_VERSION_LZ4 = 0,
FT_BLOADER_VERSION_Z7 = 1,
FT_BLOADER_VERSION_GZF = 2,
};
enum {
FT_FT5336_FAMILY_ID_0x11 = 0x11,
FT_FT5336_FAMILY_ID_0x12 = 0x12,
FT_FT5336_FAMILY_ID_0x13 = 0x13,
FT_FT5336_FAMILY_ID_0x14 = 0x14,
};
#define FT_STORE_TS_INFO(buf, id, name, max_tch, group_id, fw_vkey_support, \
fw_name, fw_maj, fw_min, fw_sub_min) \
snprintf(buf, FT_INFO_MAX_LEN, \
"controller\t= focaltech\n" \
"model\t\t= 0x%x\n" \
"name\t\t= %s\n" \
"max_touches\t= %d\n" \
"drv_ver\t\t= 0x%x\n" \
"group_id\t= 0x%x\n" \
"fw_vkey_support\t= %s\n" \
"fw_name\t\t= %s\n" \
"fw_ver\t\t= %d.%d.%d\n", id, name, \
max_tch, FT_DRIVER_VERSION, group_id, \
fw_vkey_support, fw_name, fw_maj, fw_min, \
fw_sub_min)
#define FT_DEBUG_DIR_NAME "ts_debug"
struct ft5x06_ts_data {
struct i2c_client *client;
struct input_dev *input_dev;
const struct ft5x06_ts_platform_data *pdata;
struct ft5x06_gesture_platform_data *gesture_pdata;
struct regulator *vdd;
struct regulator *vcc_i2c;
char fw_name[FT_FW_NAME_MAX_LEN];
bool loading_fw;
u8 family_id;
struct dentry *dir;
u16 addr;
bool suspended;
char *ts_info;
u8 *tch_data;
u32 tch_data_len;
u8 fw_ver[3];
u8 fw_vendor_id;
struct kobject ts_info_kobj;
#if defined(CONFIG_FB)
struct work_struct fb_notify_work;
struct notifier_block fb_notif;
#elif defined(CONFIG_HAS_EARLYSUSPEND)
struct early_suspend early_suspend;
#endif
struct pinctrl *ts_pinctrl;
struct pinctrl_state *pinctrl_state_active;
struct pinctrl_state *pinctrl_state_suspend;
struct pinctrl_state *pinctrl_state_release;
};
static int ft5x06_ts_start(struct device *dev);
static int ft5x06_ts_stop(struct device *dev);
static inline bool ft5x06_gesture_support_enabled(void)
{
return config_enabled(CONFIG_TOUCHSCREEN_FT5X06_GESTURE);
}
static int ft5x06_i2c_read(struct i2c_client *client, char *writebuf,
int writelen, char *readbuf, int readlen)
{
int ret;
if (writelen > 0) {
struct i2c_msg msgs[] = {
{
.addr = client->addr,
.flags = 0,
.len = writelen,
.buf = writebuf,
},
{
.addr = client->addr,
.flags = I2C_M_RD,
.len = readlen,
.buf = readbuf,
},
};
ret = i2c_transfer(client->adapter, msgs, 2);
if (ret < 0)
dev_err(&client->dev, "%s: i2c read error.\n",
__func__);
} else {
struct i2c_msg msgs[] = {
{
.addr = client->addr,
.flags = I2C_M_RD,
.len = readlen,
.buf = readbuf,
},
};
ret = i2c_transfer(client->adapter, msgs, 1);
if (ret < 0)
dev_err(&client->dev, "%s:i2c read error.\n", __func__);
}
return ret;
}
static int ft5x06_i2c_write(struct i2c_client *client, char *writebuf,
int writelen)
{
int ret;
struct i2c_msg msgs[] = {
{
.addr = client->addr,
.flags = 0,
.len = writelen,
.buf = writebuf,
},
};
ret = i2c_transfer(client->adapter, msgs, 1);
if (ret < 0)
dev_err(&client->dev, "%s: i2c write error.\n", __func__);
return ret;
}
static int ft5x0x_write_reg(struct i2c_client *client, u8 addr, const u8 val)
{
u8 buf[2] = {0};
buf[0] = addr;
buf[1] = val;
return ft5x06_i2c_write(client, buf, sizeof(buf));
}
static int ft5x0x_read_reg(struct i2c_client *client, u8 addr, u8 *val)
{
return ft5x06_i2c_read(client, &addr, 1, val, 1);
}
#ifdef CONFIG_TOUCHSCREEN_FT5X06_GESTURE
static ssize_t ft5x06_gesture_enable_to_set_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct ft5x06_ts_data *data = dev_get_drvdata(dev);
return scnprintf(buf, PAGE_SIZE, "%d\n",
data->gesture_pdata->gesture_enable_to_set);
}
static ssize_t ft5x06_gesture_enable_to_set_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t size)
{
struct ft5x06_ts_data *data = dev_get_drvdata(dev);
unsigned long value = 0;
int ret;
if (data->suspended)
return -EINVAL;
ret = kstrtoul(buf, 16, &value);
if (ret < 0) {
dev_err(dev, "%s:kstrtoul failed, ret=0x%x\n",
__func__, ret);
return ret;
}
if (1 == value)
data->gesture_pdata->gesture_enable_to_set = 1;
else
data->gesture_pdata->gesture_enable_to_set = 0;
return size;
}
static DEVICE_ATTR(enable, 0664,
ft5x06_gesture_enable_to_set_show,
ft5x06_gesture_enable_to_set_store);
static int ft5x06_entry_pocket(struct device *dev)
{
return ft5x06_ts_stop(dev);
}
static int ft5x06_leave_pocket(struct device *dev)
{
struct ft5x06_ts_data *data = dev_get_drvdata(dev);
int err;
ft5x06_ts_start(dev);
ft5x0x_write_reg(data->client, FT_REG_GESTURE_ENABLE, 1);
err = enable_irq_wake(data->client->irq);
if (err)
dev_err(&data->client->dev,
"%s: set_irq_wake failed\n", __func__);
data->suspended = true;
return err;
}
static ssize_t gesture_in_pocket_mode_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct ft5x06_ts_data *data = dev_get_drvdata(dev);
return scnprintf(buf, PAGE_SIZE, "%d\n",
data->gesture_pdata->in_pocket);
}
static ssize_t gesture_in_pocket_mode_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t size)
{
struct ft5x06_ts_data *data = dev_get_drvdata(dev);
unsigned long value = 0;
int ret;
ret = kstrtoul(buf, 16, &value);
if (ret < 0) {
dev_err(dev, "%s:kstrtoul failed, ret=0x%x\n",
__func__, ret);
return ret;
}
if (1 == value && data->gesture_pdata->in_pocket == 0) {
data->gesture_pdata->in_pocket = 1;
ft5x06_entry_pocket(dev);
} else if (0 == value && data->gesture_pdata->in_pocket == 1) {
ft5x06_leave_pocket(dev);
data->gesture_pdata->in_pocket = 0;
}
return size;
}
static DEVICE_ATTR(pocket, 0664,
gesture_in_pocket_mode_show,
gesture_in_pocket_mode_store);
static int ft5x06_report_gesture_doubleclick(struct input_dev *ip_dev)
{
int i;
for (i = 0; i < 2; i++) {
input_mt_slot(ip_dev, FT_GESTURE_DEFAULT_TRACKING_ID);
input_mt_report_slot_state(ip_dev, MT_TOOL_FINGER, 1);
input_report_abs(ip_dev, ABS_MT_POSITION_X,
FT_GESTURE_DOUBLECLICK_COORD_X);
input_report_abs(ip_dev, ABS_MT_POSITION_Y,
FT_GESTURE_DOUBLECLICK_COORD_Y);
input_mt_report_pointer_emulation(ip_dev, false);
input_sync(ip_dev);
input_mt_slot(ip_dev, FT_GESTURE_DEFAULT_TRACKING_ID);
input_mt_report_slot_state(ip_dev, MT_TOOL_FINGER, 0);
input_mt_report_pointer_emulation(ip_dev, false);
input_sync(ip_dev);
}
return 0;
}
static int ft5x06_report_gesture(struct i2c_client *i2c_client,
struct input_dev *ip_dev)
{
int i, temp, gesture_data_size;
int gesture_coord_x, gesture_coord_y;
int ret = -1;
short pointnum = 0;
unsigned char buf[FT_GESTURE_POINTER_NUM_MAX *
FT_GESTURE_POINTER_SIZEOF + FT_GESTURE_DATA_HEADER];
buf[0] = FT_REG_GESTURE_OUTPUT;
ret = ft5x06_i2c_read(i2c_client, buf, 1,
buf, FT_GESTURE_DATA_HEADER);
if (ret < 0) {
dev_err(&i2c_client->dev, "%s read touchdata failed.\n",
__func__);
return ret;
}
/* FW support doubleclick */
if (FT_GESTURE_DOUBLECLICK_ID == buf[0]) {
ft5x06_report_gesture_doubleclick(ip_dev);
return 0;
}
pointnum = (short)(buf[1]) & 0xff;
gesture_data_size = pointnum * FT_GESTURE_POINTER_SIZEOF +
FT_GESTURE_DATA_HEADER;
buf[0] = FT_REG_GESTURE_OUTPUT;
temp = gesture_data_size / I2C_TRANSFER_MAX_BYTE;
for (i = 0; i < temp; i++)
ret = ft5x06_i2c_read(i2c_client, buf, ((i == 0) ? 1 : 0),
buf + I2C_TRANSFER_MAX_BYTE * i, I2C_TRANSFER_MAX_BYTE);
ret = ft5x06_i2c_read(i2c_client, buf, ((temp == 0) ? 1 : 0),
buf + I2C_TRANSFER_MAX_BYTE * temp,
gesture_data_size - I2C_TRANSFER_MAX_BYTE * temp);
if (ret < 0) {
dev_err(&i2c_client->dev, "%s read touchdata failed.\n",
__func__);
return ret;
}
for (i = 0; i < pointnum; i++) {
gesture_coord_x = (((s16) buf[FT_GESTURE_DATA_HEADER +
(FT_GESTURE_POINTER_SIZEOF * i)]) & 0x0F) << 8 |
(((s16) buf[FT_GESTURE_DATA_HEADER + 1 +
(FT_GESTURE_POINTER_SIZEOF * i)]) & 0xFF);
gesture_coord_y = (((s16) buf[FT_GESTURE_DATA_HEADER + 2 +
(FT_GESTURE_POINTER_SIZEOF * i)]) & 0x0F) << 8 |
(((s16) buf[FT_GESTURE_DATA_HEADER + 3 +
(FT_GESTURE_POINTER_SIZEOF * i)]) & 0xFF);
input_mt_slot(ip_dev, FT_GESTURE_DEFAULT_TRACKING_ID);
input_mt_report_slot_state(ip_dev, MT_TOOL_FINGER, 1);
input_report_abs(ip_dev, ABS_MT_POSITION_X, gesture_coord_x);
input_report_abs(ip_dev, ABS_MT_POSITION_Y, gesture_coord_y);
input_mt_report_pointer_emulation(ip_dev, false);
input_sync(ip_dev);
}
input_mt_slot(ip_dev, FT_GESTURE_DEFAULT_TRACKING_ID);
input_mt_report_slot_state(ip_dev, MT_TOOL_FINGER, 0);
input_mt_report_pointer_emulation(ip_dev, false);
input_sync(ip_dev);
return 0;
}
#else
static DEVICE_ATTR(pocket, 0664, NULL, NULL);
static DEVICE_ATTR(enable, 0664, NULL, NULL);
static int ft5x06_report_gesture(struct i2c_client *i2c_client,
struct input_dev *ip_dev)
{
return 0;
}
#endif
static void ft5x06_update_fw_vendor_id(struct ft5x06_ts_data *data)
{
struct i2c_client *client = data->client;
u8 reg_addr;
int err;
reg_addr = FT_REG_FW_VENDOR_ID;
err = ft5x06_i2c_read(client, &reg_addr, 1, &data->fw_vendor_id, 1);
if (err < 0)
dev_err(&client->dev, "fw vendor id read failed");
}
static void ft5x06_update_fw_ver(struct ft5x06_ts_data *data)
{
struct i2c_client *client = data->client;
u8 reg_addr;
int err;
reg_addr = FT_REG_FW_VER;
err = ft5x06_i2c_read(client, &reg_addr, 1, &data->fw_ver[0], 1);
if (err < 0)
dev_err(&client->dev, "fw major version read failed");
reg_addr = FT_REG_FW_MIN_VER;
err = ft5x06_i2c_read(client, &reg_addr, 1, &data->fw_ver[1], 1);
if (err < 0)
dev_err(&client->dev, "fw minor version read failed");
reg_addr = FT_REG_FW_SUB_MIN_VER;
err = ft5x06_i2c_read(client, &reg_addr, 1, &data->fw_ver[2], 1);
if (err < 0)
dev_err(&client->dev, "fw sub minor version read failed");
dev_info(&client->dev, "Firmware version = %d.%d.%d\n",
data->fw_ver[0], data->fw_ver[1], data->fw_ver[2]);
}
static irqreturn_t ft5x06_ts_interrupt(int irq, void *dev_id)
{
struct ft5x06_ts_data *data = dev_id;
struct input_dev *ip_dev;
int rc, i;
u32 id, x, y, status, num_touches;
u8 reg, *buf, gesture_is_active;
bool update_input = false;
if (!data) {
pr_err("%s: Invalid data\n", __func__);
return IRQ_HANDLED;
}
ip_dev = data->input_dev;
buf = data->tch_data;
if (ft5x06_gesture_support_enabled() && data->pdata->gesture_support) {
ft5x0x_read_reg(data->client, FT_REG_GESTURE_ENABLE,
&gesture_is_active);
if (gesture_is_active) {
pm_wakeup_event(&(data->client->dev),
FT_GESTURE_WAKEUP_TIMEOUT);
ft5x06_report_gesture(data->client, ip_dev);
return IRQ_HANDLED;
}
}
/*
* Read touch data start from register FT_REG_DEV_MODE.
* The touch x/y value start from FT_TOUCH_X_H/L_POS and
* FT_TOUCH_Y_H/L_POS in buf.
*/
reg = FT_REG_DEV_MODE;
rc = ft5x06_i2c_read(data->client, &reg, 1, buf, data->tch_data_len);
if (rc < 0) {
dev_err(&data->client->dev, "%s: read data fail\n", __func__);
return IRQ_HANDLED;
}
for (i = 0; i < data->pdata->num_max_touches; i++) {
id = (buf[FT_TOUCH_ID_POS + FT_ONE_TCH_LEN * i]) >> 4;
if (id >= FT_MAX_ID)
break;
update_input = true;
x = (buf[FT_TOUCH_X_H_POS + FT_ONE_TCH_LEN * i] & 0x0F) << 8 |
(buf[FT_TOUCH_X_L_POS + FT_ONE_TCH_LEN * i]);
y = (buf[FT_TOUCH_Y_H_POS + FT_ONE_TCH_LEN * i] & 0x0F) << 8 |
(buf[FT_TOUCH_Y_L_POS + FT_ONE_TCH_LEN * i]);
status = buf[FT_TOUCH_EVENT_POS + FT_ONE_TCH_LEN * i] >> 6;
num_touches = buf[FT_TD_STATUS] & FT_STATUS_NUM_TP_MASK;
/* invalid combination */
if (!num_touches && !status && !id)
break;
input_mt_slot(ip_dev, id);
if (status == FT_TOUCH_DOWN || status == FT_TOUCH_CONTACT) {
input_mt_report_slot_state(ip_dev, MT_TOOL_FINGER, 1);
input_report_abs(ip_dev, ABS_MT_POSITION_X, x);
input_report_abs(ip_dev, ABS_MT_POSITION_Y, y);
} else {
input_mt_report_slot_state(ip_dev, MT_TOOL_FINGER, 0);
}
}
if (update_input) {
input_mt_report_pointer_emulation(ip_dev, false);
input_sync(ip_dev);
}
return IRQ_HANDLED;
}
static int ft5x06_gpio_configure(struct ft5x06_ts_data *data, bool on)
{
int err = 0;
if (on) {
if (gpio_is_valid(data->pdata->irq_gpio)) {
err = gpio_request(data->pdata->irq_gpio,
"ft5x06_irq_gpio");
if (err) {
dev_err(&data->client->dev,
"irq gpio request failed");
goto err_irq_gpio_req;
}
err = gpio_direction_input(data->pdata->irq_gpio);
if (err) {
dev_err(&data->client->dev,
"set_direction for irq gpio failed\n");
goto err_irq_gpio_dir;
}
}
if (gpio_is_valid(data->pdata->reset_gpio)) {
err = gpio_request(data->pdata->reset_gpio,
"ft5x06_reset_gpio");
if (err) {
dev_err(&data->client->dev,
"reset gpio request failed");
goto err_irq_gpio_dir;
}
err = gpio_direction_output(data->pdata->reset_gpio, 0);
if (err) {
dev_err(&data->client->dev,
"set_direction for reset gpio failed\n");
goto err_reset_gpio_dir;
}
msleep(data->pdata->hard_rst_dly);
gpio_set_value_cansleep(data->pdata->reset_gpio, 1);
}
return 0;
}
if (gpio_is_valid(data->pdata->irq_gpio))
gpio_free(data->pdata->irq_gpio);
if (gpio_is_valid(data->pdata->reset_gpio)) {
/*
* This is intended to save leakage current
* only. Even if the call(gpio_direction_input)
* fails, only leakage current will be more but
* functionality will not be affected.
*/
err = gpio_direction_input(data->pdata->reset_gpio);
if (err) {
dev_err(&data->client->dev,
"unable to set direction for gpio [%d]\n",
data->pdata->irq_gpio);
}
gpio_free(data->pdata->reset_gpio);
}
return 0;
err_reset_gpio_dir:
if (gpio_is_valid(data->pdata->reset_gpio))
gpio_free(data->pdata->reset_gpio);
err_irq_gpio_dir:
if (gpio_is_valid(data->pdata->irq_gpio))
gpio_free(data->pdata->irq_gpio);
err_irq_gpio_req:
return err;
}
static int ft5x06_power_on(struct ft5x06_ts_data *data, bool on)
{
int rc;
if (!on)
goto power_off;
rc = regulator_enable(data->vdd);
if (rc) {
dev_err(&data->client->dev,
"Regulator vdd enable failed rc=%d\n", rc);
return rc;
}
rc = regulator_enable(data->vcc_i2c);
if (rc) {
dev_err(&data->client->dev,
"Regulator vcc_i2c enable failed rc=%d\n", rc);
regulator_disable(data->vdd);
}
return rc;
power_off:
rc = regulator_disable(data->vdd);
if (rc) {
dev_err(&data->client->dev,
"Regulator vdd disable failed rc=%d\n", rc);
return rc;
}
rc = regulator_disable(data->vcc_i2c);
if (rc) {
dev_err(&data->client->dev,
"Regulator vcc_i2c disable failed rc=%d\n", rc);
rc = regulator_enable(data->vdd);
if (rc) {
dev_err(&data->client->dev,
"Regulator vdd enable failed rc=%d\n", rc);
}
}
return rc;
}
static int ft5x06_power_init(struct ft5x06_ts_data *data, bool on)
{
int rc;
if (!on)
goto pwr_deinit;
data->vdd = regulator_get(&data->client->dev, "vdd");
if (IS_ERR(data->vdd)) {
rc = PTR_ERR(data->vdd);
dev_err(&data->client->dev,
"Regulator get failed vdd rc=%d\n", rc);
return rc;
}
if (regulator_count_voltages(data->vdd) > 0) {
rc = regulator_set_voltage(data->vdd, FT_VTG_MIN_UV,
FT_VTG_MAX_UV);
if (rc) {
dev_err(&data->client->dev,
"Regulator set_vtg failed vdd rc=%d\n", rc);
goto reg_vdd_put;
}
}
data->vcc_i2c = regulator_get(&data->client->dev, "vcc_i2c");
if (IS_ERR(data->vcc_i2c)) {
rc = PTR_ERR(data->vcc_i2c);
dev_err(&data->client->dev,
"Regulator get failed vcc_i2c rc=%d\n", rc);
goto reg_vdd_set_vtg;
}
if (regulator_count_voltages(data->vcc_i2c) > 0) {
rc = regulator_set_voltage(data->vcc_i2c, FT_I2C_VTG_MIN_UV,
FT_I2C_VTG_MAX_UV);
if (rc) {
dev_err(&data->client->dev,
"Regulator set_vtg failed vcc_i2c rc=%d\n", rc);
goto reg_vcc_i2c_put;
}
}
return 0;
reg_vcc_i2c_put:
regulator_put(data->vcc_i2c);
reg_vdd_set_vtg:
if (regulator_count_voltages(data->vdd) > 0)
regulator_set_voltage(data->vdd, 0, FT_VTG_MAX_UV);
reg_vdd_put:
regulator_put(data->vdd);
return rc;
pwr_deinit:
if (regulator_count_voltages(data->vdd) > 0)
regulator_set_voltage(data->vdd, 0, FT_VTG_MAX_UV);
regulator_put(data->vdd);
if (regulator_count_voltages(data->vcc_i2c) > 0)
regulator_set_voltage(data->vcc_i2c, 0, FT_I2C_VTG_MAX_UV);
regulator_put(data->vcc_i2c);
return 0;
}
static int ft5x06_ts_pinctrl_init(struct ft5x06_ts_data *ft5x06_data)
{
int retval;
/* Get pinctrl if target uses pinctrl */
ft5x06_data->ts_pinctrl = devm_pinctrl_get(&(ft5x06_data->client->dev));
if (IS_ERR_OR_NULL(ft5x06_data->ts_pinctrl)) {
retval = PTR_ERR(ft5x06_data->ts_pinctrl);
dev_dbg(&ft5x06_data->client->dev,
"Target does not use pinctrl %d\n", retval);
goto err_pinctrl_get;
}
ft5x06_data->pinctrl_state_active
= pinctrl_lookup_state(ft5x06_data->ts_pinctrl,
PINCTRL_STATE_ACTIVE);
if (IS_ERR_OR_NULL(ft5x06_data->pinctrl_state_active)) {
retval = PTR_ERR(ft5x06_data->pinctrl_state_active);
dev_err(&ft5x06_data->client->dev,
"Can not lookup %s pinstate %d\n",
PINCTRL_STATE_ACTIVE, retval);
goto err_pinctrl_lookup;
}
ft5x06_data->pinctrl_state_suspend
= pinctrl_lookup_state(ft5x06_data->ts_pinctrl,
PINCTRL_STATE_SUSPEND);
if (IS_ERR_OR_NULL(ft5x06_data->pinctrl_state_suspend)) {
retval = PTR_ERR(ft5x06_data->pinctrl_state_suspend);
dev_err(&ft5x06_data->client->dev,
"Can not lookup %s pinstate %d\n",
PINCTRL_STATE_SUSPEND, retval);
goto err_pinctrl_lookup;
}
ft5x06_data->pinctrl_state_release
= pinctrl_lookup_state(ft5x06_data->ts_pinctrl,
PINCTRL_STATE_RELEASE);
if (IS_ERR_OR_NULL(ft5x06_data->pinctrl_state_release)) {
retval = PTR_ERR(ft5x06_data->pinctrl_state_release);
dev_dbg(&ft5x06_data->client->dev,
"Can not lookup %s pinstate %d\n",
PINCTRL_STATE_RELEASE, retval);
}
return 0;
err_pinctrl_lookup:
devm_pinctrl_put(ft5x06_data->ts_pinctrl);
err_pinctrl_get:
ft5x06_data->ts_pinctrl = NULL;
return retval;
}
#ifdef CONFIG_PM
static int ft5x06_ts_start(struct device *dev)
{
struct ft5x06_ts_data *data = dev_get_drvdata(dev);
int err;
if (data->pdata->power_on) {
err = data->pdata->power_on(true);
if (err) {
dev_err(dev, "power on failed");
return err;
}
} else {
err = ft5x06_power_on(data, true);
if (err) {
dev_err(dev, "power on failed");
return err;
}
}
if (data->ts_pinctrl) {
err = pinctrl_select_state(data->ts_pinctrl,
data->pinctrl_state_active);
if (err < 0)
dev_err(dev, "Cannot get active pinctrl state\n");
}
err = ft5x06_gpio_configure(data, true);
if (err < 0) {
dev_err(&data->client->dev,
"failed to put gpios in resue state\n");
goto err_gpio_configuration;
}
if (gpio_is_valid(data->pdata->reset_gpio)) {
gpio_set_value_cansleep(data->pdata->reset_gpio, 0);
msleep(data->pdata->hard_rst_dly);
gpio_set_value_cansleep(data->pdata->reset_gpio, 1);
}
msleep(data->pdata->soft_rst_dly);
enable_irq(data->client->irq);
data->suspended = false;
return 0;
err_gpio_configuration:
if (data->ts_pinctrl) {
err = pinctrl_select_state(data->ts_pinctrl,
data->pinctrl_state_suspend);
if (err < 0)
dev_err(dev, "Cannot get suspend pinctrl state\n");
}
if (data->pdata->power_on) {
err = data->pdata->power_on(false);
if (err)
dev_err(dev, "power off failed");
} else {
err = ft5x06_power_on(data, false);
if (err)
dev_err(dev, "power off failed");
}
return err;
}
static int ft5x06_ts_stop(struct device *dev)
{
struct ft5x06_ts_data *data = dev_get_drvdata(dev);
char txbuf[2];
int i, err;
disable_irq(data->client->irq);
/* release all touches */
for (i = 0; i < data->pdata->num_max_touches; i++) {
input_mt_slot(data->input_dev, i);
input_mt_report_slot_state(data->input_dev, MT_TOOL_FINGER, 0);
}
input_mt_report_pointer_emulation(data->input_dev, false);
input_sync(data->input_dev);
if (gpio_is_valid(data->pdata->reset_gpio)) {
txbuf[0] = FT_REG_PMODE;
txbuf[1] = FT_PMODE_HIBERNATE;
ft5x06_i2c_write(data->client, txbuf, sizeof(txbuf));
}
if (data->pdata->power_on) {
err = data->pdata->power_on(false);
if (err) {
dev_err(dev, "power off failed");
goto pwr_off_fail;
}
} else {
err = ft5x06_power_on(data, false);
if (err) {
dev_err(dev, "power off failed");
goto pwr_off_fail;
}
}
if (data->ts_pinctrl) {
err = pinctrl_select_state(data->ts_pinctrl,
data->pinctrl_state_suspend);
if (err < 0)
dev_err(dev, "Cannot get suspend pinctrl state\n");
}
err = ft5x06_gpio_configure(data, false);
if (err < 0) {
dev_err(&data->client->dev,
"failed to put gpios in suspend state\n");
goto gpio_configure_fail;
}
data->suspended = true;
return 0;
gpio_configure_fail:
if (data->ts_pinctrl) {
err = pinctrl_select_state(data->ts_pinctrl,
data->pinctrl_state_active);
if (err < 0)
dev_err(dev, "Cannot get active pinctrl state\n");
}
if (data->pdata->power_on) {
err = data->pdata->power_on(true);
if (err)
dev_err(dev, "power on failed");
} else {
err = ft5x06_power_on(data, true);
if (err)
dev_err(dev, "power on failed");
}
pwr_off_fail:
if (gpio_is_valid(data->pdata->reset_gpio)) {
gpio_set_value_cansleep(data->pdata->reset_gpio, 0);
msleep(data->pdata->hard_rst_dly);
gpio_set_value_cansleep(data->pdata->reset_gpio, 1);
}
enable_irq(data->client->irq);
return err;
}
static int ft5x06_ts_suspend(struct device *dev)
{
struct ft5x06_ts_data *data = dev_get_drvdata(dev);
int err;
if (data->loading_fw) {
dev_info(dev, "Firmware loading in process...\n");
return 0;
}
if (data->suspended) {
dev_info(dev, "Already in suspend state\n");
return 0;
}
if (ft5x06_gesture_support_enabled() && data->pdata->gesture_support &&
device_may_wakeup(dev) &&
data->gesture_pdata->gesture_enable_to_set) {
ft5x0x_write_reg(data->client, FT_REG_GESTURE_ENABLE, 1);
err = enable_irq_wake(data->client->irq);
if (err)
dev_err(&data->client->dev,
"%s: set_irq_wake failed\n", __func__);
data->suspended = true;
return err;
}
return ft5x06_ts_stop(dev);
}
static int ft5x06_ts_resume(struct device *dev)
{
struct ft5x06_ts_data *data = dev_get_drvdata(dev);
int err;
if (!data->suspended) {
dev_dbg(dev, "Already in awake state\n");
return 0;
}
if (ft5x06_gesture_support_enabled() && data->pdata->gesture_support &&
device_may_wakeup(dev) &&
!(data->gesture_pdata->in_pocket) &&
data->gesture_pdata->gesture_enable_to_set) {
ft5x0x_write_reg(data->client, FT_REG_GESTURE_ENABLE, 0);
err = disable_irq_wake(data->client->irq);
if (err)
dev_err(dev, "%s: disable_irq_wake failed\n",
__func__);
data->suspended = false;
return err;
}
err = ft5x06_ts_start(dev);
if (err < 0)
return err;
if (ft5x06_gesture_support_enabled() && data->pdata->gesture_support &&
device_may_wakeup(dev) &&
data->gesture_pdata->in_pocket &&
data->gesture_pdata->gesture_enable_to_set) {
ft5x0x_write_reg(data->client, FT_REG_GESTURE_ENABLE, 0);
err = disable_irq_wake(data->client->irq);
if (err)
dev_err(dev, "%s: disable_irq_wake failed\n",
__func__);
data->suspended = false;
data->gesture_pdata->in_pocket = 0;
}
return 0;
}
static const struct dev_pm_ops ft5x06_ts_pm_ops = {
#if (!defined(CONFIG_FB) && !defined(CONFIG_HAS_EARLYSUSPEND))
.suspend = ft5x06_ts_suspend,
.resume = ft5x06_ts_resume,
#endif
};
#else
static int ft5x06_ts_suspend(struct device *dev)
{
return 0;
}
static int ft5x06_ts_resume(struct device *dev)
{
return 0;
}
#endif
#if defined(CONFIG_FB)
static void fb_notify_resume_work(struct work_struct *work)
{
struct ft5x06_ts_data *ft5x06_data =
container_of(work, struct ft5x06_ts_data, fb_notify_work);
ft5x06_ts_resume(&ft5x06_data->client->dev);
}
static int fb_notifier_callback(struct notifier_block *self,
unsigned long event, void *data)
{
struct fb_event *evdata = data;
int *blank;
struct ft5x06_ts_data *ft5x06_data =
container_of(self, struct ft5x06_ts_data, fb_notif);
if (evdata && evdata->data && ft5x06_data && ft5x06_data->client) {
blank = evdata->data;
if (ft5x06_data->pdata->resume_in_workqueue) {
if (event == FB_EARLY_EVENT_BLANK &&
*blank == FB_BLANK_UNBLANK)
schedule_work(&ft5x06_data->fb_notify_work);
else if (event == FB_EVENT_BLANK &&
*blank == FB_BLANK_POWERDOWN) {
flush_work(&ft5x06_data->fb_notify_work);
ft5x06_ts_suspend(&ft5x06_data->client->dev);
}
} else {
if (event == FB_EVENT_BLANK) {
if (*blank == FB_BLANK_UNBLANK)
ft5x06_ts_resume(
&ft5x06_data->client->dev);
else if (*blank == FB_BLANK_POWERDOWN)
ft5x06_ts_suspend(
&ft5x06_data->client->dev);
}
}
}
return 0;
}
#elif defined(CONFIG_HAS_EARLYSUSPEND)
static void ft5x06_ts_early_suspend(struct early_suspend *handler)
{
struct ft5x06_ts_data *data = container_of(handler,
struct ft5x06_ts_data,
early_suspend);
ft5x06_ts_suspend(&data->client->dev);
}
static void ft5x06_ts_late_resume(struct early_suspend *handler)
{
struct ft5x06_ts_data *data = container_of(handler,
struct ft5x06_ts_data,
early_suspend);
ft5x06_ts_resume(&data->client->dev);
}
#endif
static int ft5x06_auto_cal(struct i2c_client *client)
{
struct ft5x06_ts_data *data = i2c_get_clientdata(client);
u8 temp = 0, i;
/* set to factory mode */
msleep(2 * data->pdata->soft_rst_dly);
ft5x0x_write_reg(client, FT_REG_DEV_MODE, FT_FACTORYMODE_VALUE);
msleep(data->pdata->soft_rst_dly);
/* start calibration */
ft5x0x_write_reg(client, FT_DEV_MODE_REG_CAL, FT_CAL_START);
msleep(2 * data->pdata->soft_rst_dly);
for (i = 0; i < FT_CAL_RETRY; i++) {
ft5x0x_read_reg(client, FT_REG_CAL, &temp);
/* return to normal mode, calibration finish */
if (((temp & FT_CAL_MASK) >> FT_4BIT_SHIFT) == FT_CAL_FIN)
break;
}
/*calibration OK */
msleep(2 * data->pdata->soft_rst_dly);
ft5x0x_write_reg(client, FT_REG_DEV_MODE, FT_FACTORYMODE_VALUE);
msleep(data->pdata->soft_rst_dly);
/* store calibration data */
ft5x0x_write_reg(client, FT_DEV_MODE_REG_CAL, FT_CAL_STORE);
msleep(2 * data->pdata->soft_rst_dly);
/* set to normal mode */
ft5x0x_write_reg(client, FT_REG_DEV_MODE, FT_WORKMODE_VALUE);
msleep(2 * data->pdata->soft_rst_dly);
return 0;
}
static int ft5x06_fw_upgrade_start(struct i2c_client *client,
const u8 *data, u32 data_len)
{
struct ft5x06_ts_data *ts_data = i2c_get_clientdata(client);
struct fw_upgrade_info info = ts_data->pdata->info;
u8 reset_reg;
u8 w_buf[FT_MAX_WR_BUF] = {0}, r_buf[FT_MAX_RD_BUF] = {0};
u8 pkt_buf[FT_FW_PKT_LEN + FT_FW_PKT_META_LEN];
int i, j, temp;
u32 pkt_num, pkt_len;
u8 is_5336_new_bootloader = false;
u8 is_5336_fwsize_30 = false;
u8 fw_ecc;
/* determine firmware size */
if (*(data + data_len - FT_BLOADER_SIZE_OFF) == FT_BLOADER_NEW_SIZE)
is_5336_fwsize_30 = true;
else
is_5336_fwsize_30 = false;
for (i = 0, j = 0; i < FT_UPGRADE_LOOP; i++) {
msleep(FT_EARSE_DLY_MS);
/* reset - write 0xaa and 0x55 to reset register */
if (ts_data->family_id == FT6X06_ID
|| ts_data->family_id == FT6X36_ID)
reset_reg = FT_RST_CMD_REG2;
else
reset_reg = FT_RST_CMD_REG1;
ft5x0x_write_reg(client, reset_reg, FT_UPGRADE_AA);
msleep(info.delay_aa);
ft5x0x_write_reg(client, reset_reg, FT_UPGRADE_55);
if (i <= (FT_UPGRADE_LOOP / 2))
msleep(info.delay_55 + i * 3);
else
msleep(info.delay_55 - (i - (FT_UPGRADE_LOOP / 2)) * 2);
/* Enter upgrade mode */
w_buf[0] = FT_UPGRADE_55;
ft5x06_i2c_write(client, w_buf, 1);
usleep_range(FT_55_AA_DLY_NS, FT_55_AA_DLY_NS + 1);
w_buf[0] = FT_UPGRADE_AA;
ft5x06_i2c_write(client, w_buf, 1);
/* check READ_ID */
msleep(info.delay_readid);
w_buf[0] = FT_READ_ID_REG;
w_buf[1] = 0x00;
w_buf[2] = 0x00;
w_buf[3] = 0x00;
ft5x06_i2c_read(client, w_buf, 4, r_buf, 2);
if (r_buf[0] != info.upgrade_id_1
|| r_buf[1] != info.upgrade_id_2) {
dev_err(&client->dev, "Upgrade ID mismatch(%d), IC=0x%x 0x%x, info=0x%x 0x%x\n",
i, r_buf[0], r_buf[1],
info.upgrade_id_1, info.upgrade_id_2);
} else
break;
}
if (i >= FT_UPGRADE_LOOP) {
dev_err(&client->dev, "Abort upgrade\n");
return -EIO;
}
w_buf[0] = 0xcd;
ft5x06_i2c_read(client, w_buf, 1, r_buf, 1);
if (r_buf[0] <= 4)
is_5336_new_bootloader = FT_BLOADER_VERSION_LZ4;
else if (r_buf[0] == 7)
is_5336_new_bootloader = FT_BLOADER_VERSION_Z7;
else if (r_buf[0] >= 0x0f &&
((ts_data->family_id == FT_FT5336_FAMILY_ID_0x11) ||
(ts_data->family_id == FT_FT5336_FAMILY_ID_0x12) ||
(ts_data->family_id == FT_FT5336_FAMILY_ID_0x13) ||
(ts_data->family_id == FT_FT5336_FAMILY_ID_0x14)))
is_5336_new_bootloader = FT_BLOADER_VERSION_GZF;
else
is_5336_new_bootloader = FT_BLOADER_VERSION_LZ4;
dev_dbg(&client->dev, "bootloader type=%d, r_buf=0x%x, family_id=0x%x\n",
is_5336_new_bootloader, r_buf[0], ts_data->family_id);
/* is_5336_new_bootloader = FT_BLOADER_VERSION_GZF; */
/* erase app and panel paramenter area */
w_buf[0] = FT_ERASE_APP_REG;
ft5x06_i2c_write(client, w_buf, 1);
msleep(info.delay_erase_flash);
if (is_5336_fwsize_30) {
w_buf[0] = FT_ERASE_PANEL_REG;
ft5x06_i2c_write(client, w_buf, 1);
}
msleep(FT_EARSE_DLY_MS);
/* program firmware */
if (is_5336_new_bootloader == FT_BLOADER_VERSION_LZ4
|| is_5336_new_bootloader == FT_BLOADER_VERSION_Z7)
data_len = data_len - FT_DATA_LEN_OFF_OLD_FW;
else
data_len = data_len - FT_DATA_LEN_OFF_NEW_FW;
pkt_num = (data_len) / FT_FW_PKT_LEN;
pkt_len = FT_FW_PKT_LEN;
pkt_buf[0] = FT_FW_START_REG;
pkt_buf[1] = 0x00;
fw_ecc = 0;
for (i = 0; i < pkt_num; i++) {
temp = i * FT_FW_PKT_LEN;
pkt_buf[2] = (u8) (temp >> FT_8BIT_SHIFT);
pkt_buf[3] = (u8) temp;
pkt_buf[4] = (u8) (pkt_len >> FT_8BIT_SHIFT);
pkt_buf[5] = (u8) pkt_len;
for (j = 0; j < FT_FW_PKT_LEN; j++) {
pkt_buf[6 + j] = data[i * FT_FW_PKT_LEN + j];
fw_ecc ^= pkt_buf[6 + j];
}
ft5x06_i2c_write(client, pkt_buf,
FT_FW_PKT_LEN + FT_FW_PKT_META_LEN);
msleep(FT_FW_PKT_DLY_MS);
}
/* send remaining bytes */
if ((data_len) % FT_FW_PKT_LEN > 0) {
temp = pkt_num * FT_FW_PKT_LEN;
pkt_buf[2] = (u8) (temp >> FT_8BIT_SHIFT);
pkt_buf[3] = (u8) temp;
temp = (data_len) % FT_FW_PKT_LEN;
pkt_buf[4] = (u8) (temp >> FT_8BIT_SHIFT);
pkt_buf[5] = (u8) temp;
for (i = 0; i < temp; i++) {
pkt_buf[6 + i] = data[pkt_num * FT_FW_PKT_LEN + i];
fw_ecc ^= pkt_buf[6 + i];
}
ft5x06_i2c_write(client, pkt_buf, temp + FT_FW_PKT_META_LEN);
msleep(FT_FW_PKT_DLY_MS);
}
/* send the finishing packet */
if (is_5336_new_bootloader == FT_BLOADER_VERSION_LZ4 ||
is_5336_new_bootloader == FT_BLOADER_VERSION_Z7) {
for (i = 0; i < FT_FINISHING_PKT_LEN_OLD_FW; i++) {
if (is_5336_new_bootloader == FT_BLOADER_VERSION_Z7)
temp = FT_MAGIC_BLOADER_Z7 + i;
else if (is_5336_new_bootloader ==
FT_BLOADER_VERSION_LZ4)
temp = FT_MAGIC_BLOADER_LZ4 + i;
pkt_buf[2] = (u8)(temp >> 8);
pkt_buf[3] = (u8)temp;
temp = 1;
pkt_buf[4] = (u8)(temp >> 8);
pkt_buf[5] = (u8)temp;
pkt_buf[6] = data[data_len + i];
fw_ecc ^= pkt_buf[6];
ft5x06_i2c_write(client,
pkt_buf, temp + FT_FW_PKT_META_LEN);
msleep(FT_FW_PKT_DLY_MS);
}
} else if (is_5336_new_bootloader == FT_BLOADER_VERSION_GZF) {
for (i = 0; i < FT_FINISHING_PKT_LEN_NEW_FW; i++) {
if (is_5336_fwsize_30)
temp = FT_MAGIC_BLOADER_GZF_30 + i;
else
temp = FT_MAGIC_BLOADER_GZF + i;
pkt_buf[2] = (u8)(temp >> 8);
pkt_buf[3] = (u8)temp;
temp = 1;
pkt_buf[4] = (u8)(temp >> 8);
pkt_buf[5] = (u8)temp;
pkt_buf[6] = data[data_len + i];
fw_ecc ^= pkt_buf[6];
ft5x06_i2c_write(client,
pkt_buf, temp + FT_FW_PKT_META_LEN);
msleep(FT_FW_PKT_DLY_MS);
}
}
/* verify checksum */
w_buf[0] = FT_REG_ECC;
ft5x06_i2c_read(client, w_buf, 1, r_buf, 1);
if (r_buf[0] != fw_ecc) {
dev_err(&client->dev, "ECC error! dev_ecc=%02x fw_ecc=%02x\n",
r_buf[0], fw_ecc);
return -EIO;
}
/* reset */
w_buf[0] = FT_REG_RESET_FW;
ft5x06_i2c_write(client, w_buf, 1);
msleep(ts_data->pdata->soft_rst_dly);
dev_info(&client->dev, "Firmware upgrade successful\n");
return 0;
}
static int ft5x06_fw_upgrade(struct device *dev, bool force)
{
struct ft5x06_ts_data *data = dev_get_drvdata(dev);
const struct firmware *fw = NULL;
int rc;
u8 fw_file_maj, fw_file_min, fw_file_sub_min, fw_file_vendor_id;
bool fw_upgrade = false;
if (data->suspended) {
dev_err(dev, "Device is in suspend state: Exit FW upgrade\n");
return -EBUSY;
}
rc = request_firmware(&fw, data->fw_name, dev);
if (rc < 0) {
dev_err(dev, "Request firmware failed - %s (%d)\n",
data->fw_name, rc);
return rc;
}
if (fw->size < FT_FW_MIN_SIZE || fw->size > FT_FW_MAX_SIZE) {
dev_err(dev, "Invalid firmware size (%zu)\n", fw->size);
rc = -EIO;
goto rel_fw;
}
if (data->family_id == FT6X36_ID) {
fw_file_maj = FT_FW_FILE_MAJ_VER_FT6X36(fw);
fw_file_vendor_id = FT_FW_FILE_VENDOR_ID_FT6X36(fw);
} else {
fw_file_maj = FT_FW_FILE_MAJ_VER(fw);
fw_file_vendor_id = FT_FW_FILE_VENDOR_ID(fw);
}
fw_file_min = FT_FW_FILE_MIN_VER(fw);
fw_file_sub_min = FT_FW_FILE_SUB_MIN_VER(fw);
fw_file_vendor_id = FT_FW_FILE_VENDOR_ID(fw);
dev_info(dev, "Current firmware: %d.%d.%d", data->fw_ver[0],
data->fw_ver[1], data->fw_ver[2]);
dev_info(dev, "New firmware: %d.%d.%d", fw_file_maj,
fw_file_min, fw_file_sub_min);
if (force)
fw_upgrade = true;
else if ((data->fw_ver[0] < fw_file_maj) &&
data->fw_vendor_id == fw_file_vendor_id)
fw_upgrade = true;
if (!fw_upgrade) {
dev_info(dev, "Exiting fw upgrade...\n");
rc = -EFAULT;
goto rel_fw;
}
/* start firmware upgrade */
if (FT_FW_CHECK(fw, data)) {
rc = ft5x06_fw_upgrade_start(data->client, fw->data, fw->size);
if (rc < 0)
dev_err(dev, "update failed (%d). try later...\n", rc);
else if (data->pdata->info.auto_cal)
ft5x06_auto_cal(data->client);
} else {
dev_err(dev, "FW format error\n");
rc = -EIO;
}
ft5x06_update_fw_ver(data);
FT_STORE_TS_INFO(data->ts_info, data->family_id, data->pdata->name,
data->pdata->num_max_touches, data->pdata->group_id,
data->pdata->fw_vkey_support ? "yes" : "no",
data->pdata->fw_name, data->fw_ver[0],
data->fw_ver[1], data->fw_ver[2]);
rel_fw:
release_firmware(fw);
return rc;
}
static ssize_t ft5x06_update_fw_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct ft5x06_ts_data *data = dev_get_drvdata(dev);
return snprintf(buf, 2, "%d\n", data->loading_fw);
}
static ssize_t ft5x06_update_fw_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t size)
{
struct ft5x06_ts_data *data = dev_get_drvdata(dev);
unsigned long val;
int rc;
if (size > 2)
return -EINVAL;
rc = kstrtoul(buf, 10, &val);
if (rc != 0)
return rc;
if (data->suspended) {
dev_info(dev, "In suspend state, try again later...\n");
return size;
}
mutex_lock(&data->input_dev->mutex);
if (!data->loading_fw && val) {
data->loading_fw = true;
ft5x06_fw_upgrade(dev, false);
data->loading_fw = false;
}
mutex_unlock(&data->input_dev->mutex);
return size;
}
static DEVICE_ATTR(update_fw, 0664, ft5x06_update_fw_show,
ft5x06_update_fw_store);
static ssize_t ft5x06_force_update_fw_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t size)
{
struct ft5x06_ts_data *data = dev_get_drvdata(dev);
unsigned long val;
int rc;
if (size > 2)
return -EINVAL;
rc = kstrtoul(buf, 10, &val);
if (rc != 0)
return rc;
mutex_lock(&data->input_dev->mutex);
if (!data->loading_fw && val) {
data->loading_fw = true;
ft5x06_fw_upgrade(dev, true);
data->loading_fw = false;
}
mutex_unlock(&data->input_dev->mutex);
return size;
}
static DEVICE_ATTR(force_update_fw, 0664, ft5x06_update_fw_show,
ft5x06_force_update_fw_store);
static ssize_t ft5x06_fw_name_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct ft5x06_ts_data *data = dev_get_drvdata(dev);
return snprintf(buf, FT_FW_NAME_MAX_LEN - 1, "%s\n", data->fw_name);
}
static ssize_t ft5x06_fw_name_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t size)
{
struct ft5x06_ts_data *data = dev_get_drvdata(dev);
if (size > FT_FW_NAME_MAX_LEN - 1)
return -EINVAL;
strlcpy(data->fw_name, buf, size);
if (data->fw_name[size-1] == '\n')
data->fw_name[size-1] = 0;
return size;
}
static DEVICE_ATTR(fw_name, 0664, ft5x06_fw_name_show, ft5x06_fw_name_store);
static ssize_t ft5x06_ts_info_show(struct kobject *kobj,
struct kobj_attribute *attr, char *buf)
{
struct ft5x06_ts_data *data = container_of(kobj,
struct ft5x06_ts_data, ts_info_kobj);
return snprintf(buf, FT_INFO_MAX_LEN,
"vendor name = Focaltech\n"
"model = 0x%x\n"
"fw_verion = %d.%d.%d\n",
data->family_id, data->fw_ver[0],
data->fw_ver[1], data->fw_ver[2]);
}
static struct kobj_attribute ts_info_attribute = __ATTR(ts_info,
0664, ft5x06_ts_info_show, NULL);
static bool ft5x06_debug_addr_is_valid(int addr)
{
if (addr < 0 || addr > 0xFF) {
pr_err("FT reg address is invalid: 0x%x\n", addr);
return false;
}
return true;
}
static int ft5x06_debug_data_set(void *_data, u64 val)
{
struct ft5x06_ts_data *data = _data;
mutex_lock(&data->input_dev->mutex);
if (ft5x06_debug_addr_is_valid(data->addr))
dev_info(&data->client->dev,
"Writing into FT registers not supported\n");
mutex_unlock(&data->input_dev->mutex);
return 0;
}
static int ft5x06_debug_data_get(void *_data, u64 *val)
{
struct ft5x06_ts_data *data = _data;
int rc;
u8 reg;
mutex_lock(&data->input_dev->mutex);
if (ft5x06_debug_addr_is_valid(data->addr)) {
rc = ft5x0x_read_reg(data->client, data->addr, &reg);
if (rc < 0)
dev_err(&data->client->dev,
"FT read register 0x%x failed (%d)\n",
data->addr, rc);
else
*val = reg;
}
mutex_unlock(&data->input_dev->mutex);
return 0;
}
DEFINE_SIMPLE_ATTRIBUTE(debug_data_fops, ft5x06_debug_data_get,
ft5x06_debug_data_set, "0x%02llX\n");
static int ft5x06_debug_addr_set(void *_data, u64 val)
{
struct ft5x06_ts_data *data = _data;
if (ft5x06_debug_addr_is_valid(val)) {
mutex_lock(&data->input_dev->mutex);
data->addr = val;
mutex_unlock(&data->input_dev->mutex);
}
return 0;
}
static int ft5x06_debug_addr_get(void *_data, u64 *val)
{
struct ft5x06_ts_data *data = _data;
mutex_lock(&data->input_dev->mutex);
if (ft5x06_debug_addr_is_valid(data->addr))
*val = data->addr;
mutex_unlock(&data->input_dev->mutex);
return 0;
}
DEFINE_SIMPLE_ATTRIBUTE(debug_addr_fops, ft5x06_debug_addr_get,
ft5x06_debug_addr_set, "0x%02llX\n");
static int ft5x06_debug_suspend_set(void *_data, u64 val)
{
struct ft5x06_ts_data *data = _data;
mutex_lock(&data->input_dev->mutex);
if (val)
ft5x06_ts_suspend(&data->client->dev);
else
ft5x06_ts_resume(&data->client->dev);
mutex_unlock(&data->input_dev->mutex);
return 0;
}
static int ft5x06_debug_suspend_get(void *_data, u64 *val)
{
struct ft5x06_ts_data *data = _data;
mutex_lock(&data->input_dev->mutex);
*val = data->suspended;
mutex_unlock(&data->input_dev->mutex);
return 0;
}
DEFINE_SIMPLE_ATTRIBUTE(debug_suspend_fops, ft5x06_debug_suspend_get,
ft5x06_debug_suspend_set, "%lld\n");
static int ft5x06_debug_dump_info(struct seq_file *m, void *v)
{
struct ft5x06_ts_data *data = m->private;
seq_printf(m, "%s\n", data->ts_info);
return 0;
}
static int debugfs_dump_info_open(struct inode *inode, struct file *file)
{
return single_open(file, ft5x06_debug_dump_info, inode->i_private);
}
static const struct file_operations debug_dump_info_fops = {
.owner = THIS_MODULE,
.open = debugfs_dump_info_open,
.read = seq_read,
.release = single_release,
};
#ifdef CONFIG_OF
static int ft5x06_get_dt_coords(struct device *dev, char *name,
struct ft5x06_ts_platform_data *pdata)
{
u32 coords[FT_COORDS_ARR_SIZE];
struct property *prop;
struct device_node *np = dev->of_node;
int coords_size, rc;
prop = of_find_property(np, name, NULL);
if (!prop)
return -EINVAL;
if (!prop->value)
return -ENODATA;
coords_size = prop->length / sizeof(u32);
if (coords_size != FT_COORDS_ARR_SIZE) {
dev_err(dev, "invalid %s\n", name);
return -EINVAL;
}
rc = of_property_read_u32_array(np, name, coords, coords_size);
if (rc && (rc != -EINVAL)) {
dev_err(dev, "Unable to read %s\n", name);
return rc;
}
if (!strcmp(name, "focaltech,panel-coords")) {
pdata->panel_minx = coords[0];
pdata->panel_miny = coords[1];
pdata->panel_maxx = coords[2];
pdata->panel_maxy = coords[3];
} else if (!strcmp(name, "focaltech,display-coords")) {
pdata->x_min = coords[0];
pdata->y_min = coords[1];
pdata->x_max = coords[2];
pdata->y_max = coords[3];
} else {
dev_err(dev, "unsupported property %s\n", name);
return -EINVAL;
}
return 0;
}
static int ft5x06_parse_dt(struct device *dev,
struct ft5x06_ts_platform_data *pdata)
{
int rc;
struct device_node *np = dev->of_node;
struct property *prop;
u32 temp_val, num_buttons;
u32 button_map[MAX_BUTTONS];
pdata->name = "focaltech";
rc = of_property_read_string(np, "focaltech,name", &pdata->name);
if (rc && (rc != -EINVAL)) {
dev_err(dev, "Unable to read name\n");
return rc;
}
rc = ft5x06_get_dt_coords(dev, "focaltech,panel-coords", pdata);
if (rc && (rc != -EINVAL))
return rc;
rc = ft5x06_get_dt_coords(dev, "focaltech,display-coords", pdata);
if (rc)
return rc;
pdata->i2c_pull_up = of_property_read_bool(np,
"focaltech,i2c-pull-up");
pdata->no_force_update = of_property_read_bool(np,
"focaltech,no-force-update");
/* reset, irq gpio info */
pdata->reset_gpio = of_get_named_gpio_flags(np, "focaltech,reset-gpio",
0, &pdata->reset_gpio_flags);
if (pdata->reset_gpio < 0)
return pdata->reset_gpio;
pdata->irq_gpio = of_get_named_gpio_flags(np, "focaltech,irq-gpio",
0, &pdata->irq_gpio_flags);
if (pdata->irq_gpio < 0)
return pdata->irq_gpio;
pdata->fw_name = "ft_fw.bin";
rc = of_property_read_string(np, "focaltech,fw-name", &pdata->fw_name);
if (rc && (rc != -EINVAL)) {
dev_err(dev, "Unable to read fw name\n");
return rc;
}
rc = of_property_read_u32(np, "focaltech,group-id", &temp_val);
if (!rc)
pdata->group_id = temp_val;
else
return rc;
rc = of_property_read_u32(np, "focaltech,hard-reset-delay-ms",
&temp_val);
if (!rc)
pdata->hard_rst_dly = temp_val;
else
return rc;
rc = of_property_read_u32(np, "focaltech,soft-reset-delay-ms",
&temp_val);
if (!rc)
pdata->soft_rst_dly = temp_val;
else
return rc;
rc = of_property_read_u32(np, "focaltech,num-max-touches", &temp_val);
if (!rc)
pdata->num_max_touches = temp_val;
else
return rc;
rc = of_property_read_u32(np, "focaltech,fw-delay-aa-ms", &temp_val);
if (rc && (rc != -EINVAL)) {
dev_err(dev, "Unable to read fw delay aa\n");
return rc;
} else if (rc != -EINVAL)
pdata->info.delay_aa = temp_val;
rc = of_property_read_u32(np, "focaltech,fw-delay-55-ms", &temp_val);
if (rc && (rc != -EINVAL)) {
dev_err(dev, "Unable to read fw delay 55\n");
return rc;
} else if (rc != -EINVAL)
pdata->info.delay_55 = temp_val;
rc = of_property_read_u32(np, "focaltech,fw-upgrade-id1", &temp_val);
if (rc && (rc != -EINVAL)) {
dev_err(dev, "Unable to read fw upgrade id1\n");
return rc;
} else if (rc != -EINVAL)
pdata->info.upgrade_id_1 = temp_val;
rc = of_property_read_u32(np, "focaltech,fw-upgrade-id2", &temp_val);
if (rc && (rc != -EINVAL)) {
dev_err(dev, "Unable to read fw upgrade id2\n");
return rc;
} else if (rc != -EINVAL)
pdata->info.upgrade_id_2 = temp_val;
rc = of_property_read_u32(np, "focaltech,fw-delay-readid-ms",
&temp_val);
if (rc && (rc != -EINVAL)) {
dev_err(dev, "Unable to read fw delay read id\n");
return rc;
} else if (rc != -EINVAL)
pdata->info.delay_readid = temp_val;
rc = of_property_read_u32(np, "focaltech,fw-delay-era-flsh-ms",
&temp_val);
if (rc && (rc != -EINVAL)) {
dev_err(dev, "Unable to read fw delay erase flash\n");
return rc;
} else if (rc != -EINVAL)
pdata->info.delay_erase_flash = temp_val;
pdata->info.auto_cal = of_property_read_bool(np,
"focaltech,fw-auto-cal");
pdata->fw_vkey_support = of_property_read_bool(np,
"focaltech,fw-vkey-support");
pdata->ignore_id_check = of_property_read_bool(np,
"focaltech,ignore-id-check");
pdata->gesture_support = of_property_read_bool(np,
"focaltech,gesture-support");
pdata->resume_in_workqueue = of_property_read_bool(np,
"focaltech,resume-in-workqueue");
rc = of_property_read_u32(np, "focaltech,family-id", &temp_val);
if (!rc)
pdata->family_id = temp_val;
else
return rc;
prop = of_find_property(np, "focaltech,button-map", NULL);
if (prop) {
num_buttons = prop->length / sizeof(temp_val);
if (num_buttons > MAX_BUTTONS)
return -EINVAL;
rc = of_property_read_u32_array(np,
"focaltech,button-map", button_map,
num_buttons);
if (rc) {
dev_err(dev, "Unable to read key codes\n");
return rc;
}
}
return 0;
}
#else
static int ft5x06_parse_dt(struct device *dev,
struct ft5x06_ts_platform_data *pdata)
{
return -ENODEV;
}
#endif
static int ft5x06_ts_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct ft5x06_ts_platform_data *pdata;
struct ft5x06_gesture_platform_data *gesture_pdata;
struct ft5x06_ts_data *data;
struct input_dev *input_dev;
struct dentry *temp;
u8 reg_value;
u8 reg_addr;
int err, len;
if (client->dev.of_node) {
pdata = devm_kzalloc(&client->dev,
sizeof(struct ft5x06_ts_platform_data), GFP_KERNEL);
if (!pdata)
return -ENOMEM;
err = ft5x06_parse_dt(&client->dev, pdata);
if (err) {
dev_err(&client->dev, "DT parsing failed\n");
return err;
}
} else
pdata = client->dev.platform_data;
if (!pdata) {
dev_err(&client->dev, "Invalid pdata\n");
return -EINVAL;
}
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
dev_err(&client->dev, "I2C not supported\n");
return -ENODEV;
}
data = devm_kzalloc(&client->dev,
sizeof(struct ft5x06_ts_data), GFP_KERNEL);
if (!data)
return -ENOMEM;
if (pdata->fw_name) {
len = strlen(pdata->fw_name);
if (len > FT_FW_NAME_MAX_LEN - 1) {
dev_err(&client->dev, "Invalid firmware name\n");
return -EINVAL;
}
strlcpy(data->fw_name, pdata->fw_name, len + 1);
}
data->tch_data_len = FT_TCH_LEN(pdata->num_max_touches);
data->tch_data = devm_kzalloc(&client->dev,
data->tch_data_len, GFP_KERNEL);
if (!data->tch_data)
return -ENOMEM;
input_dev = input_allocate_device();
if (!input_dev) {
dev_err(&client->dev, "failed to allocate input device\n");
return -ENOMEM;
}
data->input_dev = input_dev;
data->client = client;
data->pdata = pdata;
input_dev->name = "ft5x06_ts";
input_dev->id.bustype = BUS_I2C;
input_dev->dev.parent = &client->dev;
input_set_drvdata(input_dev, data);
i2c_set_clientdata(client, data);
__set_bit(EV_KEY, input_dev->evbit);
__set_bit(EV_ABS, input_dev->evbit);
__set_bit(BTN_TOUCH, input_dev->keybit);
__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
input_mt_init_slots(input_dev, pdata->num_max_touches, 0);
input_set_abs_params(input_dev, ABS_MT_POSITION_X, pdata->x_min,
pdata->x_max, 0, 0);
input_set_abs_params(input_dev, ABS_MT_POSITION_Y, pdata->y_min,
pdata->y_max, 0, 0);
err = input_register_device(input_dev);
if (err) {
dev_err(&client->dev, "Input device registration failed\n");
input_free_device(input_dev);
return err;
}
if (pdata->power_init) {
err = pdata->power_init(true);
if (err) {
dev_err(&client->dev, "power init failed");
goto unreg_inputdev;
}
} else {
err = ft5x06_power_init(data, true);
if (err) {
dev_err(&client->dev, "power init failed");
goto unreg_inputdev;
}
}
if (pdata->power_on) {
err = pdata->power_on(true);
if (err) {
dev_err(&client->dev, "power on failed");
goto pwr_deinit;
}
} else {
err = ft5x06_power_on(data, true);
if (err) {
dev_err(&client->dev, "power on failed");
goto pwr_deinit;
}
}
err = ft5x06_ts_pinctrl_init(data);
if (!err && data->ts_pinctrl) {
/*
* Pinctrl handle is optional. If pinctrl handle is found
* let pins to be configured in active state. If not
* found continue further without error.
*/
err = pinctrl_select_state(data->ts_pinctrl,
data->pinctrl_state_active);
if (err < 0) {
dev_err(&client->dev,
"failed to select pin to active state");
}
}
err = ft5x06_gpio_configure(data, true);
if (err < 0) {
dev_err(&client->dev,
"Failed to configure the gpios\n");
goto err_gpio_req;
}
/* make sure CTP already finish startup process */
msleep(data->pdata->soft_rst_dly);
/* check the controller id */
reg_addr = FT_REG_ID;
err = ft5x06_i2c_read(client, &reg_addr, 1, &reg_value, 1);
if (err < 0) {
dev_err(&client->dev, "version read failed");
goto free_gpio;
}
dev_info(&client->dev, "Device ID = 0x%x\n", reg_value);
if ((pdata->family_id != reg_value) && (!pdata->ignore_id_check)) {
dev_err(&client->dev, "%s:Unsupported controller\n", __func__);
goto free_gpio;
}
data->family_id = pdata->family_id;
err = request_threaded_irq(client->irq, NULL,
ft5x06_ts_interrupt,
/*
* the interrupt trigger mode will be set in Device Tree with property
* "interrupts", so here we just need to set the flag IRQF_ONESHOT
*/
IRQF_ONESHOT,
client->dev.driver->name, data);
if (err) {
dev_err(&client->dev, "request irq failed\n");
goto free_gpio;
}
if (ft5x06_gesture_support_enabled() && data->pdata->gesture_support) {
device_init_wakeup(&client->dev, 1);
gesture_pdata = devm_kzalloc(&client->dev,
sizeof(struct ft5x06_gesture_platform_data),
GFP_KERNEL);
if (!gesture_pdata) {
dev_err(&client->dev, "Failed to allocate memory\n");
goto free_gesture_dev;
}
data->gesture_pdata = gesture_pdata;
gesture_pdata->data = data;
gesture_pdata->gesture_class =
class_create(THIS_MODULE, "gesture");
if (IS_ERR(gesture_pdata->gesture_class)) {
err = PTR_ERR(gesture_pdata->gesture_class);
dev_err(&client->dev, "Failed to create class.\n");
goto free_gesture_pdata;
}
gesture_pdata->dev = device_create(gesture_pdata->gesture_class,
NULL, 0, NULL, "gesture_ft5x06");
if (IS_ERR(gesture_pdata->dev)) {
err = PTR_ERR(gesture_pdata->dev);
dev_err(&client->dev, "Failed to create device.\n");
goto free_gesture_class;
}
dev_set_drvdata(gesture_pdata->dev, data);
err = device_create_file(gesture_pdata->dev,
&dev_attr_enable);
if (err) {
dev_err(gesture_pdata->dev,
"sys file creation failed\n");
goto free_gesture_dev;
}
err = device_create_file(gesture_pdata->dev,
&dev_attr_pocket);
if (err) {
dev_err(gesture_pdata->dev,
"sys file creation failed\n");
goto free_enable_sys;
}
}
err = device_create_file(&client->dev, &dev_attr_fw_name);
if (err) {
dev_err(&client->dev, "sys file creation failed\n");
goto free_pocket_sys;
}
err = device_create_file(&client->dev, &dev_attr_update_fw);
if (err) {
dev_err(&client->dev, "sys file creation failed\n");
goto free_fw_name_sys;
}
err = device_create_file(&client->dev, &dev_attr_force_update_fw);
if (err) {
dev_err(&client->dev, "sys file creation failed\n");
goto free_update_fw_sys;
}
data->dir = debugfs_create_dir(FT_DEBUG_DIR_NAME, NULL);
if (data->dir == NULL || IS_ERR(data->dir)) {
pr_err("debugfs_create_dir failed(%ld)\n", PTR_ERR(data->dir));
err = PTR_ERR(data->dir);
goto free_force_update_fw_sys;
}
temp = debugfs_create_file("addr", S_IRUSR | S_IWUSR, data->dir, data,
&debug_addr_fops);
if (temp == NULL || IS_ERR(temp)) {
pr_err("debugfs_create_file failed: rc=%ld\n", PTR_ERR(temp));
err = PTR_ERR(temp);
goto free_debug_dir;
}
temp = debugfs_create_file("data", S_IRUSR | S_IWUSR, data->dir, data,
&debug_data_fops);
if (temp == NULL || IS_ERR(temp)) {
pr_err("debugfs_create_file failed: rc=%ld\n", PTR_ERR(temp));
err = PTR_ERR(temp);
goto free_debug_dir;
}
temp = debugfs_create_file("suspend", S_IRUSR | S_IWUSR, data->dir,
data, &debug_suspend_fops);
if (temp == NULL || IS_ERR(temp)) {
pr_err("debugfs_create_file failed: rc=%ld\n", PTR_ERR(temp));
err = PTR_ERR(temp);
goto free_debug_dir;
}
temp = debugfs_create_file("dump_info", S_IRUSR | S_IWUSR, data->dir,
data, &debug_dump_info_fops);
if (temp == NULL || IS_ERR(temp)) {
pr_err("debugfs_create_file failed: rc=%ld\n", PTR_ERR(temp));
err = PTR_ERR(temp);
goto free_debug_dir;
}
data->ts_info = devm_kzalloc(&client->dev,
FT_INFO_MAX_LEN, GFP_KERNEL);
if (!data->ts_info)
goto free_debug_dir;
/*get some register information */
reg_addr = FT_REG_POINT_RATE;
ft5x06_i2c_read(client, &reg_addr, 1, &reg_value, 1);
if (err < 0)
dev_err(&client->dev, "report rate read failed");
dev_info(&client->dev, "report rate = %dHz\n", reg_value * 10);
reg_addr = FT_REG_THGROUP;
err = ft5x06_i2c_read(client, &reg_addr, 1, &reg_value, 1);
if (err < 0)
dev_err(&client->dev, "threshold read failed");
dev_dbg(&client->dev, "touch threshold = %d\n", reg_value * 4);
/*creation touch panel info kobj*/
data->ts_info_kobj = *(kobject_create_and_add(FT_SYSFS_TS_INFO,
kernel_kobj));
if (!&(data->ts_info_kobj)) {
dev_err(&client->dev, "kob creation failed .\n");
} else {
err = sysfs_create_file(&(data->ts_info_kobj),
&ts_info_attribute.attr);
if (err) {
kobject_put(&(data->ts_info_kobj));
dev_err(&client->dev, "sysfs create fail .\n");
}
}
ft5x06_update_fw_ver(data);
ft5x06_update_fw_vendor_id(data);
FT_STORE_TS_INFO(data->ts_info, data->family_id, data->pdata->name,
data->pdata->num_max_touches, data->pdata->group_id,
data->pdata->fw_vkey_support ? "yes" : "no",
data->pdata->fw_name, data->fw_ver[0],
data->fw_ver[1], data->fw_ver[2]);
#if defined(CONFIG_FB)
INIT_WORK(&data->fb_notify_work, fb_notify_resume_work);
data->fb_notif.notifier_call = fb_notifier_callback;
err = fb_register_client(&data->fb_notif);
if (err)
dev_err(&client->dev, "Unable to register fb_notifier: %d\n",
err);
#elif defined(CONFIG_HAS_EARLYSUSPEND)
data->early_suspend.level = EARLY_SUSPEND_LEVEL_BLANK_SCREEN +
FT_SUSPEND_LEVEL;
data->early_suspend.suspend = ft5x06_ts_early_suspend;
data->early_suspend.resume = ft5x06_ts_late_resume;
register_early_suspend(&data->early_suspend);
#endif
return 0;
free_debug_dir:
debugfs_remove_recursive(data->dir);
free_force_update_fw_sys:
device_remove_file(&client->dev, &dev_attr_force_update_fw);
free_update_fw_sys:
device_remove_file(&client->dev, &dev_attr_update_fw);
free_fw_name_sys:
device_remove_file(&client->dev, &dev_attr_fw_name);
free_pocket_sys:
if (ft5x06_gesture_support_enabled() && data->pdata->gesture_support)
device_remove_file(&client->dev, &dev_attr_pocket);
free_enable_sys:
if (ft5x06_gesture_support_enabled() && data->pdata->gesture_support)
device_remove_file(&client->dev, &dev_attr_enable);
free_gesture_dev:
if (ft5x06_gesture_support_enabled() && data->pdata->gesture_support)
device_destroy(gesture_pdata->gesture_class, 0);
free_gesture_class:
if (ft5x06_gesture_support_enabled() && data->pdata->gesture_support)
class_destroy(gesture_pdata->gesture_class);
free_gesture_pdata:
if (ft5x06_gesture_support_enabled() && data->pdata->gesture_support) {
devm_kfree(&client->dev, gesture_pdata);
data->gesture_pdata = NULL;
}
free_gpio:
if (gpio_is_valid(pdata->reset_gpio))
gpio_free(pdata->reset_gpio);
if (gpio_is_valid(pdata->irq_gpio))
gpio_free(pdata->irq_gpio);
err_gpio_req:
if (data->ts_pinctrl) {
if (IS_ERR_OR_NULL(data->pinctrl_state_release)) {
devm_pinctrl_put(data->ts_pinctrl);
data->ts_pinctrl = NULL;
} else {
err = pinctrl_select_state(data->ts_pinctrl,
data->pinctrl_state_release);
if (err)
pr_err("failed to select relase pinctrl state\n");
}
}
if (pdata->power_on)
pdata->power_on(false);
else
ft5x06_power_on(data, false);
pwr_deinit:
if (pdata->power_init)
pdata->power_init(false);
else
ft5x06_power_init(data, false);
unreg_inputdev:
input_unregister_device(input_dev);
return err;
}
static int ft5x06_ts_remove(struct i2c_client *client)
{
struct ft5x06_ts_data *data = i2c_get_clientdata(client);
int retval;
if (ft5x06_gesture_support_enabled() && data->pdata->gesture_support) {
device_init_wakeup(&client->dev, 0);
device_remove_file(&client->dev, &dev_attr_pocket);
device_remove_file(&client->dev, &dev_attr_enable);
device_destroy(data->gesture_pdata->gesture_class, 0);
class_destroy(data->gesture_pdata->gesture_class);
devm_kfree(&client->dev, data->gesture_pdata);
data->gesture_pdata = NULL;
}
debugfs_remove_recursive(data->dir);
device_remove_file(&client->dev, &dev_attr_force_update_fw);
device_remove_file(&client->dev, &dev_attr_update_fw);
device_remove_file(&client->dev, &dev_attr_fw_name);
#if defined(CONFIG_FB)
if (fb_unregister_client(&data->fb_notif))
dev_err(&client->dev, "Error occurred while unregistering fb_notifier.\n");
#elif defined(CONFIG_HAS_EARLYSUSPEND)
unregister_early_suspend(&data->early_suspend);
#endif
free_irq(client->irq, data);
if (gpio_is_valid(data->pdata->reset_gpio))
gpio_free(data->pdata->reset_gpio);
if (gpio_is_valid(data->pdata->irq_gpio))
gpio_free(data->pdata->irq_gpio);
if (data->ts_pinctrl) {
if (IS_ERR_OR_NULL(data->pinctrl_state_release)) {
devm_pinctrl_put(data->ts_pinctrl);
data->ts_pinctrl = NULL;
} else {
retval = pinctrl_select_state(data->ts_pinctrl,
data->pinctrl_state_release);
if (retval < 0)
pr_err("failed to select release pinctrl state\n");
}
}
if (data->pdata->power_on)
data->pdata->power_on(false);
else
ft5x06_power_on(data, false);
if (data->pdata->power_init)
data->pdata->power_init(false);
else
ft5x06_power_init(data, false);
input_unregister_device(data->input_dev);
kobject_put(&(data->ts_info_kobj));
return 0;
}
static const struct i2c_device_id ft5x06_ts_id[] = {
{"ft5x06_ts", 0},
{},
};
MODULE_DEVICE_TABLE(i2c, ft5x06_ts_id);
#ifdef CONFIG_OF
static struct of_device_id ft5x06_match_table[] = {
{ .compatible = "focaltech,5x06",},
{ },
};
#else
#define ft5x06_match_table NULL
#endif
static struct i2c_driver ft5x06_ts_driver = {
.probe = ft5x06_ts_probe,
.remove = ft5x06_ts_remove,
.driver = {
.name = "ft5x06_ts",
.owner = THIS_MODULE,
.of_match_table = ft5x06_match_table,
#ifdef CONFIG_PM
.pm = &ft5x06_ts_pm_ops,
#endif
},
.id_table = ft5x06_ts_id,
};
static int __init ft5x06_ts_init(void)
{
return i2c_add_driver(&ft5x06_ts_driver);
}
module_init(ft5x06_ts_init);
static void __exit ft5x06_ts_exit(void)
{
i2c_del_driver(&ft5x06_ts_driver);
}
module_exit(ft5x06_ts_exit);
MODULE_DESCRIPTION("FocalTech ft5x06 TouchScreen driver");
MODULE_LICENSE("GPL v2");