335 lines
8.6 KiB
C
335 lines
8.6 KiB
C
/*
|
|
* QNAP TS-109/TS-209 Board Setup
|
|
*
|
|
* Maintainer: Byron Bradley <byron.bbradley@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*/
|
|
#include <linux/gpio.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/mv643xx_eth.h>
|
|
#include <linux/gpio_keys.h>
|
|
#include <linux/input.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/serial_reg.h>
|
|
#include <linux/ata_platform.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/pci.h>
|
|
#include <mach/orion5x.h>
|
|
#include "common.h"
|
|
#include "mpp.h"
|
|
#include "tsx09-common.h"
|
|
|
|
#define QNAP_TS209_NOR_BOOT_BASE 0xf4000000
|
|
#define QNAP_TS209_NOR_BOOT_SIZE SZ_8M
|
|
|
|
/****************************************************************************
|
|
* 8MiB NOR flash. The struct mtd_partition is not in the same order as the
|
|
* partitions on the device because we want to keep compatibility with
|
|
* existing QNAP firmware.
|
|
*
|
|
* Layout as used by QNAP:
|
|
* [2] 0x00000000-0x00200000 : "Kernel"
|
|
* [3] 0x00200000-0x00600000 : "RootFS1"
|
|
* [4] 0x00600000-0x00700000 : "RootFS2"
|
|
* [6] 0x00700000-0x00760000 : "NAS Config" (read-only)
|
|
* [5] 0x00760000-0x00780000 : "U-Boot Config"
|
|
* [1] 0x00780000-0x00800000 : "U-Boot" (read-only)
|
|
***************************************************************************/
|
|
static struct mtd_partition qnap_ts209_partitions[] = {
|
|
{
|
|
.name = "U-Boot",
|
|
.size = 0x00080000,
|
|
.offset = 0x00780000,
|
|
.mask_flags = MTD_WRITEABLE,
|
|
}, {
|
|
.name = "Kernel",
|
|
.size = 0x00200000,
|
|
.offset = 0,
|
|
}, {
|
|
.name = "RootFS1",
|
|
.size = 0x00400000,
|
|
.offset = 0x00200000,
|
|
}, {
|
|
.name = "RootFS2",
|
|
.size = 0x00100000,
|
|
.offset = 0x00600000,
|
|
}, {
|
|
.name = "U-Boot Config",
|
|
.size = 0x00020000,
|
|
.offset = 0x00760000,
|
|
}, {
|
|
.name = "NAS Config",
|
|
.size = 0x00060000,
|
|
.offset = 0x00700000,
|
|
.mask_flags = MTD_WRITEABLE,
|
|
},
|
|
};
|
|
|
|
static struct physmap_flash_data qnap_ts209_nor_flash_data = {
|
|
.width = 1,
|
|
.parts = qnap_ts209_partitions,
|
|
.nr_parts = ARRAY_SIZE(qnap_ts209_partitions)
|
|
};
|
|
|
|
static struct resource qnap_ts209_nor_flash_resource = {
|
|
.flags = IORESOURCE_MEM,
|
|
.start = QNAP_TS209_NOR_BOOT_BASE,
|
|
.end = QNAP_TS209_NOR_BOOT_BASE + QNAP_TS209_NOR_BOOT_SIZE - 1,
|
|
};
|
|
|
|
static struct platform_device qnap_ts209_nor_flash = {
|
|
.name = "physmap-flash",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &qnap_ts209_nor_flash_data,
|
|
},
|
|
.resource = &qnap_ts209_nor_flash_resource,
|
|
.num_resources = 1,
|
|
};
|
|
|
|
/*****************************************************************************
|
|
* PCI
|
|
****************************************************************************/
|
|
|
|
#define QNAP_TS209_PCI_SLOT0_OFFS 7
|
|
#define QNAP_TS209_PCI_SLOT0_IRQ_PIN 6
|
|
#define QNAP_TS209_PCI_SLOT1_IRQ_PIN 7
|
|
|
|
static void __init qnap_ts209_pci_preinit(void)
|
|
{
|
|
int pin;
|
|
|
|
/*
|
|
* Configure PCI GPIO IRQ pins
|
|
*/
|
|
pin = QNAP_TS209_PCI_SLOT0_IRQ_PIN;
|
|
if (gpio_request(pin, "PCI Int1") == 0) {
|
|
if (gpio_direction_input(pin) == 0) {
|
|
irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
|
|
} else {
|
|
printk(KERN_ERR "qnap_ts209_pci_preinit failed to "
|
|
"set_irq_type pin %d\n", pin);
|
|
gpio_free(pin);
|
|
}
|
|
} else {
|
|
printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request "
|
|
"%d\n", pin);
|
|
}
|
|
|
|
pin = QNAP_TS209_PCI_SLOT1_IRQ_PIN;
|
|
if (gpio_request(pin, "PCI Int2") == 0) {
|
|
if (gpio_direction_input(pin) == 0) {
|
|
irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
|
|
} else {
|
|
printk(KERN_ERR "qnap_ts209_pci_preinit failed "
|
|
"to set_irq_type pin %d\n", pin);
|
|
gpio_free(pin);
|
|
}
|
|
} else {
|
|
printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request "
|
|
"%d\n", pin);
|
|
}
|
|
}
|
|
|
|
static int __init qnap_ts209_pci_map_irq(const struct pci_dev *dev, u8 slot,
|
|
u8 pin)
|
|
{
|
|
int irq;
|
|
|
|
/*
|
|
* Check for devices with hard-wired IRQs.
|
|
*/
|
|
irq = orion5x_pci_map_irq(dev, slot, pin);
|
|
if (irq != -1)
|
|
return irq;
|
|
|
|
/*
|
|
* PCI IRQs are connected via GPIOs.
|
|
*/
|
|
switch (slot - QNAP_TS209_PCI_SLOT0_OFFS) {
|
|
case 0:
|
|
return gpio_to_irq(QNAP_TS209_PCI_SLOT0_IRQ_PIN);
|
|
case 1:
|
|
return gpio_to_irq(QNAP_TS209_PCI_SLOT1_IRQ_PIN);
|
|
default:
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
static struct hw_pci qnap_ts209_pci __initdata = {
|
|
.nr_controllers = 2,
|
|
.preinit = qnap_ts209_pci_preinit,
|
|
.setup = orion5x_pci_sys_setup,
|
|
.scan = orion5x_pci_sys_scan_bus,
|
|
.map_irq = qnap_ts209_pci_map_irq,
|
|
};
|
|
|
|
static int __init qnap_ts209_pci_init(void)
|
|
{
|
|
if (machine_is_ts209())
|
|
pci_common_init(&qnap_ts209_pci);
|
|
|
|
return 0;
|
|
}
|
|
|
|
subsys_initcall(qnap_ts209_pci_init);
|
|
|
|
/*****************************************************************************
|
|
* RTC S35390A on I2C bus
|
|
****************************************************************************/
|
|
|
|
#define TS209_RTC_GPIO 3
|
|
|
|
static struct i2c_board_info __initdata qnap_ts209_i2c_rtc = {
|
|
I2C_BOARD_INFO("s35390a", 0x30),
|
|
.irq = 0,
|
|
};
|
|
|
|
/****************************************************************************
|
|
* GPIO Attached Keys
|
|
* Power button is attached to the PIC microcontroller
|
|
****************************************************************************/
|
|
|
|
#define QNAP_TS209_GPIO_KEY_MEDIA 1
|
|
#define QNAP_TS209_GPIO_KEY_RESET 2
|
|
|
|
static struct gpio_keys_button qnap_ts209_buttons[] = {
|
|
{
|
|
.code = KEY_COPY,
|
|
.gpio = QNAP_TS209_GPIO_KEY_MEDIA,
|
|
.desc = "USB Copy Button",
|
|
.active_low = 1,
|
|
}, {
|
|
.code = KEY_RESTART,
|
|
.gpio = QNAP_TS209_GPIO_KEY_RESET,
|
|
.desc = "Reset Button",
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_platform_data qnap_ts209_button_data = {
|
|
.buttons = qnap_ts209_buttons,
|
|
.nbuttons = ARRAY_SIZE(qnap_ts209_buttons),
|
|
};
|
|
|
|
static struct platform_device qnap_ts209_button_device = {
|
|
.name = "gpio-keys",
|
|
.id = -1,
|
|
.num_resources = 0,
|
|
.dev = {
|
|
.platform_data = &qnap_ts209_button_data,
|
|
},
|
|
};
|
|
|
|
/*****************************************************************************
|
|
* SATA
|
|
****************************************************************************/
|
|
static struct mv_sata_platform_data qnap_ts209_sata_data = {
|
|
.n_ports = 2,
|
|
};
|
|
|
|
/*****************************************************************************
|
|
|
|
* General Setup
|
|
****************************************************************************/
|
|
static unsigned int ts209_mpp_modes[] __initdata = {
|
|
MPP0_UNUSED,
|
|
MPP1_GPIO, /* USB copy button */
|
|
MPP2_GPIO, /* Load defaults button */
|
|
MPP3_GPIO, /* GPIO RTC */
|
|
MPP4_UNUSED,
|
|
MPP5_UNUSED,
|
|
MPP6_GPIO, /* PCI Int A */
|
|
MPP7_GPIO, /* PCI Int B */
|
|
MPP8_UNUSED,
|
|
MPP9_UNUSED,
|
|
MPP10_UNUSED,
|
|
MPP11_UNUSED,
|
|
MPP12_SATA_LED, /* SATA 0 presence */
|
|
MPP13_SATA_LED, /* SATA 1 presence */
|
|
MPP14_SATA_LED, /* SATA 0 active */
|
|
MPP15_SATA_LED, /* SATA 1 active */
|
|
MPP16_UART, /* UART1 RXD */
|
|
MPP17_UART, /* UART1 TXD */
|
|
MPP18_GPIO, /* SW_RST */
|
|
MPP19_UNUSED,
|
|
0,
|
|
};
|
|
|
|
static void __init qnap_ts209_init(void)
|
|
{
|
|
/*
|
|
* Setup basic Orion functions. Need to be called early.
|
|
*/
|
|
orion5x_init();
|
|
|
|
orion5x_mpp_conf(ts209_mpp_modes);
|
|
|
|
/*
|
|
* MPP[20] PCI clock 0
|
|
* MPP[21] PCI clock 1
|
|
* MPP[22] USB 0 over current
|
|
* MPP[23-25] Reserved
|
|
*/
|
|
|
|
/*
|
|
* Configure peripherals.
|
|
*/
|
|
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
|
|
ORION_MBUS_DEVBUS_BOOT_ATTR,
|
|
QNAP_TS209_NOR_BOOT_BASE,
|
|
QNAP_TS209_NOR_BOOT_SIZE);
|
|
platform_device_register(&qnap_ts209_nor_flash);
|
|
|
|
orion5x_ehci0_init();
|
|
orion5x_ehci1_init();
|
|
qnap_tsx09_find_mac_addr(QNAP_TS209_NOR_BOOT_BASE +
|
|
qnap_ts209_partitions[5].offset,
|
|
qnap_ts209_partitions[5].size);
|
|
orion5x_eth_init(&qnap_tsx09_eth_data);
|
|
orion5x_i2c_init();
|
|
orion5x_sata_init(&qnap_ts209_sata_data);
|
|
orion5x_uart0_init();
|
|
orion5x_uart1_init();
|
|
orion5x_xor_init();
|
|
|
|
platform_device_register(&qnap_ts209_button_device);
|
|
|
|
/* Get RTC IRQ and register the chip */
|
|
if (gpio_request(TS209_RTC_GPIO, "rtc") == 0) {
|
|
if (gpio_direction_input(TS209_RTC_GPIO) == 0)
|
|
qnap_ts209_i2c_rtc.irq = gpio_to_irq(TS209_RTC_GPIO);
|
|
else
|
|
gpio_free(TS209_RTC_GPIO);
|
|
}
|
|
if (qnap_ts209_i2c_rtc.irq == 0)
|
|
pr_warn("qnap_ts209_init: failed to get RTC IRQ\n");
|
|
i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1);
|
|
|
|
/* register tsx09 specific power-off method */
|
|
pm_power_off = qnap_tsx09_power_off;
|
|
}
|
|
|
|
MACHINE_START(TS209, "QNAP TS-109/TS-209")
|
|
/* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
|
|
.atag_offset = 0x100,
|
|
.init_machine = qnap_ts209_init,
|
|
.map_io = orion5x_map_io,
|
|
.init_early = orion5x_init_early,
|
|
.init_irq = orion5x_init_irq,
|
|
.init_time = orion5x_timer_init,
|
|
.fixup = tag_fixup_mem32,
|
|
.restart = orion5x_restart,
|
|
MACHINE_END
|