37 lines
1.8 KiB
Plaintext
37 lines
1.8 KiB
Plaintext
ANDROID USB:
|
|
|
|
This describes the device tree node for the Android USB gadget device.
|
|
This works in conjunction with a USB Device Controller (UDC) to provide
|
|
a dynamically configurable composition of functions to be exposed when
|
|
connected to a USB host.
|
|
|
|
Required properties:
|
|
- compatible: should be "qcom,android-usb"
|
|
|
|
Optional properties :
|
|
- reg : offset and length of memory region that is used by device to
|
|
update USB PID and serial numbers used by bootloader in DLOAD mode.
|
|
- qcom,pm-qos-latency : This property must be a list of three integer values
|
|
(perf, normal, sleep) where each value respresents DMA latency in microsecs.
|
|
First value represents DMA latency to vote with pm_qos when back to back USB
|
|
transfers are happening and it requires USB thoughput to be maximum.
|
|
Second value represents value to vote when not many USB transfers are
|
|
happening and it is OK to have higher DMA latency to save power.
|
|
Third value represents DMA latency to vote when USB BUS is IDLE and absolutely
|
|
no transfers are happening. It should allow transition to lowest power state.
|
|
- qcom,usb-core-id: Index to refer USB hardware core to bind android gadget driver
|
|
with UDC if multiple USB peripheral controllers are present. If unspecified,
|
|
core is set to zero by default.
|
|
- qcom,supported-func: Represents list of supported function drivers. If this
|
|
property is present android USB driver dynamically creats the list of
|
|
supported function drivers and uses this list instead of statically defined default
|
|
supported function driver list.
|
|
Example Android USB device node :
|
|
android_usb@fc42b0c8 {
|
|
compatible = "qcom,android-usb";
|
|
reg = <0xfc42b0c8 0xc8>;
|
|
qcom,pm-qos-latency = <2 1001 12701>;
|
|
qcom,supported-func = "rndis_gsi","ecm_gsi","rmnet_gsi";
|
|
qcom,usb-core-id = <1>;
|
|
};
|