214 lines
6.5 KiB
Plaintext
214 lines
6.5 KiB
Plaintext
* ams AS3722 Power management IC.
|
|
|
|
Required properties:
|
|
-------------------
|
|
- compatible: Must be "ams,as3722".
|
|
- reg: I2C device address.
|
|
- interrupt-controller: AS3722 has internal interrupt controller which takes the
|
|
interrupt request from internal sub-blocks like RTC, regulators, GPIOs as well
|
|
as external input.
|
|
- #interrupt-cells: Should be set to 2 for IRQ number and flags.
|
|
The first cell is the IRQ number. IRQ numbers for different interrupt source
|
|
of AS3722 are defined at dt-bindings/mfd/as3722.h
|
|
The second cell is the flags, encoded as the trigger masks from binding document
|
|
interrupts.txt, using dt-bindings/irq.
|
|
|
|
Optional properties:
|
|
--------------------
|
|
- ams,enable-internal-int-pullup: Boolean property, to enable internal pullup on
|
|
interrupt pin. Missing this will disable internal pullup on INT pin.
|
|
- ams,enable-internal-i2c-pullup: Boolean property, to enable internal pullup on
|
|
i2c scl/sda pins. Missing this will disable internal pullup on i2c
|
|
scl/sda lines.
|
|
|
|
Optional submodule and their properties:
|
|
=======================================
|
|
|
|
Pinmux and GPIO:
|
|
===============
|
|
Device has 8 GPIO pins which can be configured as GPIO as well as the special IO
|
|
functions.
|
|
|
|
Please refer to pinctrl-bindings.txt in this directory for details of the
|
|
common pinctrl bindings used by client devices, including the meaning of the
|
|
phrase "pin configuration node".
|
|
|
|
Following are properties which is needed if GPIO and pinmux functionality
|
|
is required:
|
|
Required properties:
|
|
-------------------
|
|
- gpio-controller: Marks the device node as a GPIO controller.
|
|
- #gpio-cells: Number of GPIO cells. Refer to binding document
|
|
gpio/gpio.txt
|
|
|
|
Optional properties:
|
|
--------------------
|
|
Following properties are require if pin control setting is required
|
|
at boot.
|
|
- pinctrl-names: A pinctrl state named "default" be defined, using the
|
|
bindings in pinctrl/pinctrl-binding.txt.
|
|
- pinctrl[0...n]: Properties to contain the phandle that refer to
|
|
different nodes of pin control settings. These nodes represents
|
|
the pin control setting of state 0 to state n. Each of these
|
|
nodes contains different subnodes to represents some desired
|
|
configuration for a list of pins. This configuration can
|
|
include the mux function to select on those pin(s), and
|
|
various pin configuration parameters, such as pull-up,
|
|
open drain.
|
|
|
|
Each subnode have following properties:
|
|
Required properties:
|
|
- pins: List of pins. Valid values of pins properties are:
|
|
gpio0, gpio1, gpio2, gpio3, gpio4, gpio5,
|
|
gpio6, gpio7
|
|
|
|
Optional properties:
|
|
function, bias-disable, bias-pull-up, bias-pull-down,
|
|
bias-high-impedance, drive-open-drain.
|
|
|
|
Valid values for function properties are:
|
|
gpio, interrupt-out, gpio-in-interrupt,
|
|
vsup-vbat-low-undebounce-out,
|
|
vsup-vbat-low-debounce-out,
|
|
voltage-in-standby, oc-pg-sd0, oc-pg-sd6,
|
|
powergood-out, pwm-in, pwm-out, clk32k-out,
|
|
watchdog-in, soft-reset-in
|
|
|
|
Regulators:
|
|
===========
|
|
Device has multiple DCDC and LDOs. The node "regulators" is require if regulator
|
|
functionality is needed.
|
|
|
|
Following are properties of regulator subnode.
|
|
|
|
Optional properties:
|
|
-------------------
|
|
The input supply of regulators are the optional properties on the
|
|
regulator node. The input supply of these regulators are provided
|
|
through following properties:
|
|
vsup-sd2-supply: Input supply for SD2.
|
|
vsup-sd3-supply: Input supply for SD3.
|
|
vsup-sd4-supply: Input supply for SD4.
|
|
vsup-sd5-supply: Input supply for SD5.
|
|
vin-ldo0-supply: Input supply for LDO0.
|
|
vin-ldo1-6-supply: Input supply for LDO1 and LDO6.
|
|
vin-ldo2-5-7-supply: Input supply for LDO2, LDO5 and LDO7.
|
|
vin-ldo3-4-supply: Input supply for LDO3 and LDO4.
|
|
vin-ldo9-10-supply: Input supply for LDO9 and LDO10.
|
|
vin-ldo11-supply: Input supply for LDO11.
|
|
|
|
Optional sub nodes for regulators:
|
|
---------------------------------
|
|
The subnodes name is the name of regulator and it must be one of:
|
|
sd[0-6], ldo[0-7], ldo[9-11]
|
|
|
|
Each sub-node should contain the constraints and initialization
|
|
information for that regulator. See regulator.txt for a description
|
|
of standard properties for these sub-nodes.
|
|
Additional optional custom properties are listed below.
|
|
ams,ext-control: External control of the rail. The option of
|
|
this properties will tell which external input is
|
|
controlling this rail. Valid values are 0, 1, 2 ad 3.
|
|
0: There is no external control of this rail.
|
|
1: Rail is controlled by ENABLE1 input pin.
|
|
2: Rail is controlled by ENABLE2 input pin.
|
|
3: Rail is controlled by ENABLE3 input pin.
|
|
Missing this property on DT will be assume as no
|
|
external control. The external control pin macros
|
|
are defined @dt-bindings/mfd/as3722.h
|
|
|
|
ams,enable-tracking: Enable tracking with SD1, only supported
|
|
by LDO3.
|
|
|
|
Power-off:
|
|
=========
|
|
AS3722 supports the system power off by turning off all its rail. This
|
|
is provided through pm_power_off.
|
|
The device node should have the following properties to enable this
|
|
functionality
|
|
ams,system-power-controller: Boolean, to enable the power off functionality
|
|
through this device.
|
|
|
|
Example:
|
|
--------
|
|
#include <dt-bindings/mfd/as3722.h>
|
|
...
|
|
ams3722 {
|
|
compatible = "ams,as3722";
|
|
reg = <0x48>;
|
|
|
|
ams,system-power-controller;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&as3722_default>;
|
|
|
|
as3722_default: pinmux {
|
|
gpio0 {
|
|
pins = "gpio0";
|
|
function = "gpio";
|
|
bias-pull-down;
|
|
};
|
|
|
|
gpio1_2_4_7 {
|
|
pins = "gpio1", "gpio2", "gpio4", "gpio7";
|
|
function = "gpio";
|
|
bias-pull-up;
|
|
};
|
|
|
|
gpio5 {
|
|
pins = "gpio5";
|
|
function = "clk32k_out";
|
|
};
|
|
}
|
|
|
|
regulators {
|
|
vsup-sd2-supply = <...>;
|
|
...
|
|
|
|
sd0 {
|
|
regulator-name = "vdd_cpu";
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-always-on;
|
|
ams,ext-control = <2>;
|
|
};
|
|
|
|
sd1 {
|
|
regulator-name = "vdd_core";
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-always-on;
|
|
ams,ext-control = <1>;
|
|
};
|
|
|
|
sd2 {
|
|
regulator-name = "vddio_ddr";
|
|
regulator-min-microvolt = <1350000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sd4 {
|
|
regulator-name = "avdd-hdmi-pex";
|
|
regulator-min-microvolt = <1050000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sd5 {
|
|
regulator-name = "vdd-1v8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
....
|
|
};
|
|
};
|