45 lines
1.5 KiB
Plaintext
45 lines
1.5 KiB
Plaintext
* TI - TSC ADC (Touschscreen and analog digital converter)
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
Required properties:
|
|
- child "tsc"
|
|
ti,wires: Wires refer to application modes i.e. 4/5/8 wire touchscreen
|
|
support on the platform.
|
|
ti,x-plate-resistance: X plate resistance
|
|
ti,coordinate-readouts: The sequencer supports a total of 16
|
|
programmable steps each step is used to
|
|
read a single coordinate. A single
|
|
readout is enough but multiple reads can
|
|
increase the quality.
|
|
A value of 5 means, 5 reads for X, 5 for
|
|
Y and 2 for Z (always). This utilises 12
|
|
of the 16 software steps available. The
|
|
remaining 4 can be used by the ADC.
|
|
ti,wire-config: Different boards could have a different order for
|
|
connecting wires on touchscreen. We need to provide an
|
|
8 bit number where in the 1st four bits represent the
|
|
analog lines and the next 4 bits represent positive/
|
|
negative terminal on that input line. Notations to
|
|
represent the input lines and terminals resoectively
|
|
is as follows:
|
|
AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7.
|
|
XP = 0, XN = 1, YP = 2, YN = 3.
|
|
- child "adc"
|
|
ti,adc-channels: List of analog inputs available for ADC.
|
|
AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7.
|
|
|
|
Example:
|
|
tscadc: tscadc@44e0d000 {
|
|
compatible = "ti,am3359-tscadc";
|
|
tsc {
|
|
ti,wires = <4>;
|
|
ti,x-plate-resistance = <200>;
|
|
ti,coordiante-readouts = <5>;
|
|
ti,wire-config = <0x00 0x11 0x22 0x33>;
|
|
};
|
|
|
|
adc {
|
|
ti,adc-channels = <4 5 6 7>;
|
|
};
|
|
}
|