44 lines
1.7 KiB
Plaintext
44 lines
1.7 KiB
Plaintext
* QCEDEV (Qualcomm Crypto Engine Device)
|
|
|
|
Required properties:
|
|
- compatible : should be "qcom,qcedev"
|
|
- reg : should contain crypto, BAM register map.
|
|
- reg-names : should contain the crypto and bam base register names.
|
|
- interrupts : should contain crypto BAM interrupt.
|
|
- qcom,bam-pipe-pair : should contain crypto BAM pipe pair index.
|
|
- qcom,ce-hw-instance : should contain crypto HW instance.
|
|
- qcom,msm_bus,name: Should be "qcedev-noc"
|
|
- qcom,msm_bus,num_cases: Depends on the use cases for bus scaling
|
|
- qcom,msm_bus,active-only: Boolean flag for context of request (actve/dual)
|
|
- qcom,msm_bus,num_paths: The paths for source and destination ports
|
|
- qcom,msm_bus,vectors: Vectors for bus topology.
|
|
- qcom,ce-device: Device number.
|
|
- qcom,ce-opp-freq: indicates the CE operating frequency in Hz, changes from target to target.
|
|
|
|
Optional properties:
|
|
- qcom,ce-hw-shared : optional, indicates if the hardware is shared between EE.
|
|
- qcom,ce-hw-key : optional, indicates if the hardware supports use of HW KEY.
|
|
- qcom,support-core-clk-only : optional, indicates if the HW supports single crypto core clk.
|
|
- qcom,bsm-ee : optional, indicate the BAM EE value, changes from target to target. Default value is 1 if not specified.
|
|
|
|
Example:
|
|
|
|
qcom,qcedev@fd440000 {
|
|
compatible = "qcom,qcedev";
|
|
reg = <0xfd440000 0x20000>,
|
|
<0xfd444000 0x8000>;
|
|
reg-names = "crypto-base","crypto-bam-base";
|
|
interrupts = <0 235 0>;
|
|
qcom,bam-pipe-pair = <0>;
|
|
qcom,ce-hw-instance = <1>;
|
|
qcom,ce-device = <0>;
|
|
qcom,ce-hw-shared;
|
|
qcom,msm-bus,name = "qcedev-noc";
|
|
qcom,msm-bus,num-cases = <2>;
|
|
qcom,msm-bus,num-paths = <1>;
|
|
qcom,msm-bus,vectors-KBps =
|
|
<56 512 0 0>,
|
|
<56 512 3936000 393600>,
|
|
qcom,ce-opp-freq = <100000000>;
|
|
};
|