476 lines
10 KiB
Plaintext
476 lines
10 KiB
Plaintext
===========================================
|
|
ARM topology binding description
|
|
===========================================
|
|
|
|
===========================================
|
|
1 - Introduction
|
|
===========================================
|
|
|
|
In an ARM system, the hierarchy of CPUs is defined through three entities that
|
|
are used to describe the layout of physical CPUs in the system:
|
|
|
|
- cluster
|
|
- core
|
|
- thread
|
|
|
|
The cpu nodes (bindings defined in [1]) represent the devices that
|
|
correspond to physical CPUs and are to be mapped to the hierarchy levels.
|
|
|
|
The bottom hierarchy level sits at core or thread level depending on whether
|
|
symmetric multi-threading (SMT) is supported or not.
|
|
|
|
For instance in a system where CPUs support SMT, "cpu" nodes represent all
|
|
threads existing in the system and map to the hierarchy level "thread" above.
|
|
In systems where SMT is not supported "cpu" nodes represent all cores present
|
|
in the system and map to the hierarchy level "core" above.
|
|
|
|
ARM topology bindings allow one to associate cpu nodes with hierarchical groups
|
|
corresponding to the system hierarchy; syntactically they are defined as device
|
|
tree nodes.
|
|
|
|
The remainder of this document provides the topology bindings for ARM, based
|
|
on the ePAPR standard, available from:
|
|
|
|
http://www.power.org/documentation/epapr-version-1-1/
|
|
|
|
If not stated otherwise, whenever a reference to a cpu node phandle is made its
|
|
value must point to a cpu node compliant with the cpu node bindings as
|
|
documented in [1].
|
|
A topology description containing phandles to cpu nodes that are not compliant
|
|
with bindings standardized in [1] is therefore considered invalid.
|
|
|
|
===========================================
|
|
2 - cpu-map node
|
|
===========================================
|
|
|
|
The ARM CPU topology is defined within the cpu-map node, which is a direct
|
|
child of the cpus node and provides a container where the actual topology
|
|
nodes are listed.
|
|
|
|
- cpu-map node
|
|
|
|
Usage: Optional - On ARM SMP systems provide CPUs topology to the OS.
|
|
ARM uniprocessor systems do not require a topology
|
|
description and therefore should not define a
|
|
cpu-map node.
|
|
|
|
Description: The cpu-map node is just a container node where its
|
|
subnodes describe the CPU topology.
|
|
|
|
Node name must be "cpu-map".
|
|
|
|
The cpu-map node's parent node must be the cpus node.
|
|
|
|
The cpu-map node's child nodes can be:
|
|
|
|
- one or more cluster nodes
|
|
|
|
Any other configuration is considered invalid.
|
|
|
|
The cpu-map node can only contain three types of child nodes:
|
|
|
|
- cluster node
|
|
- core node
|
|
- thread node
|
|
|
|
whose bindings are described in paragraph 3.
|
|
|
|
The nodes describing the CPU topology (cluster/core/thread) can only
|
|
be defined within the cpu-map node and every core/thread in the system
|
|
must be defined within the topology. Any other configuration is
|
|
invalid and therefore must be ignored.
|
|
|
|
===========================================
|
|
2.1 - cpu-map child nodes naming convention
|
|
===========================================
|
|
|
|
cpu-map child nodes must follow a naming convention where the node name
|
|
must be "clusterN", "coreN", "threadN" depending on the node type (ie
|
|
cluster/core/thread) (where N = {0, 1, ...} is the node number; nodes which
|
|
are siblings within a single common parent node must be given a unique and
|
|
sequential N value, starting from 0).
|
|
cpu-map child nodes which do not share a common parent node can have the same
|
|
name (ie same number N as other cpu-map child nodes at different device tree
|
|
levels) since name uniqueness will be guaranteed by the device tree hierarchy.
|
|
|
|
===========================================
|
|
3 - cluster/core/thread node bindings
|
|
===========================================
|
|
|
|
Bindings for cluster/cpu/thread nodes are defined as follows:
|
|
|
|
- cluster node
|
|
|
|
Description: must be declared within a cpu-map node, one node
|
|
per cluster. A system can contain several layers of
|
|
clustering and cluster nodes can be contained in parent
|
|
cluster nodes.
|
|
|
|
The cluster node name must be "clusterN" as described in 2.1 above.
|
|
A cluster node can not be a leaf node.
|
|
|
|
A cluster node's child nodes must be:
|
|
|
|
- one or more cluster nodes; or
|
|
- one or more core nodes
|
|
|
|
Any other configuration is considered invalid.
|
|
|
|
- core node
|
|
|
|
Description: must be declared in a cluster node, one node per core in
|
|
the cluster. If the system does not support SMT, core
|
|
nodes are leaf nodes, otherwise they become containers of
|
|
thread nodes.
|
|
|
|
The core node name must be "coreN" as described in 2.1 above.
|
|
|
|
A core node must be a leaf node if SMT is not supported.
|
|
|
|
Properties for core nodes that are leaf nodes:
|
|
|
|
- cpu
|
|
Usage: required
|
|
Value type: <phandle>
|
|
Definition: a phandle to the cpu node that corresponds to the
|
|
core node.
|
|
|
|
If a core node is not a leaf node (CPUs supporting SMT) a core node's
|
|
child nodes can be:
|
|
|
|
- one or more thread nodes
|
|
|
|
Any other configuration is considered invalid.
|
|
|
|
- thread node
|
|
|
|
Description: must be declared in a core node, one node per thread
|
|
in the core if the system supports SMT. Thread nodes are
|
|
always leaf nodes in the device tree.
|
|
|
|
The thread node name must be "threadN" as described in 2.1 above.
|
|
|
|
A thread node must be a leaf node.
|
|
|
|
A thread node must contain the following property:
|
|
|
|
- cpu
|
|
Usage: required
|
|
Value type: <phandle>
|
|
Definition: a phandle to the cpu node that corresponds to
|
|
the thread node.
|
|
|
|
===========================================
|
|
4 - Example dts
|
|
===========================================
|
|
|
|
Example 1 (ARM 64-bit, 16-cpu system, two clusters of clusters):
|
|
|
|
cpus {
|
|
#size-cells = <0>;
|
|
#address-cells = <2>;
|
|
|
|
cpu-map {
|
|
cluster0 {
|
|
cluster0 {
|
|
core0 {
|
|
thread0 {
|
|
cpu = <&CPU0>;
|
|
};
|
|
thread1 {
|
|
cpu = <&CPU1>;
|
|
};
|
|
};
|
|
|
|
core1 {
|
|
thread0 {
|
|
cpu = <&CPU2>;
|
|
};
|
|
thread1 {
|
|
cpu = <&CPU3>;
|
|
};
|
|
};
|
|
};
|
|
|
|
cluster1 {
|
|
core0 {
|
|
thread0 {
|
|
cpu = <&CPU4>;
|
|
};
|
|
thread1 {
|
|
cpu = <&CPU5>;
|
|
};
|
|
};
|
|
|
|
core1 {
|
|
thread0 {
|
|
cpu = <&CPU6>;
|
|
};
|
|
thread1 {
|
|
cpu = <&CPU7>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
cluster1 {
|
|
cluster0 {
|
|
core0 {
|
|
thread0 {
|
|
cpu = <&CPU8>;
|
|
};
|
|
thread1 {
|
|
cpu = <&CPU9>;
|
|
};
|
|
};
|
|
core1 {
|
|
thread0 {
|
|
cpu = <&CPU10>;
|
|
};
|
|
thread1 {
|
|
cpu = <&CPU11>;
|
|
};
|
|
};
|
|
};
|
|
|
|
cluster1 {
|
|
core0 {
|
|
thread0 {
|
|
cpu = <&CPU12>;
|
|
};
|
|
thread1 {
|
|
cpu = <&CPU13>;
|
|
};
|
|
};
|
|
core1 {
|
|
thread0 {
|
|
cpu = <&CPU14>;
|
|
};
|
|
thread1 {
|
|
cpu = <&CPU15>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
CPU0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <0x0 0x0>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0 0x20000000>;
|
|
};
|
|
|
|
CPU1: cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <0x0 0x1>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0 0x20000000>;
|
|
};
|
|
|
|
CPU2: cpu@100 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <0x0 0x100>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0 0x20000000>;
|
|
};
|
|
|
|
CPU3: cpu@101 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <0x0 0x101>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0 0x20000000>;
|
|
};
|
|
|
|
CPU4: cpu@10000 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <0x0 0x10000>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0 0x20000000>;
|
|
};
|
|
|
|
CPU5: cpu@10001 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <0x0 0x10001>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0 0x20000000>;
|
|
};
|
|
|
|
CPU6: cpu@10100 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <0x0 0x10100>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0 0x20000000>;
|
|
};
|
|
|
|
CPU7: cpu@10101 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <0x0 0x10101>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0 0x20000000>;
|
|
};
|
|
|
|
CPU8: cpu@100000000 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <0x1 0x0>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0 0x20000000>;
|
|
};
|
|
|
|
CPU9: cpu@100000001 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <0x1 0x1>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0 0x20000000>;
|
|
};
|
|
|
|
CPU10: cpu@100000100 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <0x1 0x100>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0 0x20000000>;
|
|
};
|
|
|
|
CPU11: cpu@100000101 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <0x1 0x101>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0 0x20000000>;
|
|
};
|
|
|
|
CPU12: cpu@100010000 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <0x1 0x10000>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0 0x20000000>;
|
|
};
|
|
|
|
CPU13: cpu@100010001 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <0x1 0x10001>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0 0x20000000>;
|
|
};
|
|
|
|
CPU14: cpu@100010100 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <0x1 0x10100>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0 0x20000000>;
|
|
};
|
|
|
|
CPU15: cpu@100010101 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <0x1 0x10101>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0 0x20000000>;
|
|
};
|
|
};
|
|
|
|
Example 2 (ARM 32-bit, dual-cluster, 8-cpu system, no SMT):
|
|
|
|
cpus {
|
|
#size-cells = <0>;
|
|
#address-cells = <1>;
|
|
|
|
cpu-map {
|
|
cluster0 {
|
|
core0 {
|
|
cpu = <&CPU0>;
|
|
};
|
|
core1 {
|
|
cpu = <&CPU1>;
|
|
};
|
|
core2 {
|
|
cpu = <&CPU2>;
|
|
};
|
|
core3 {
|
|
cpu = <&CPU3>;
|
|
};
|
|
};
|
|
|
|
cluster1 {
|
|
core0 {
|
|
cpu = <&CPU4>;
|
|
};
|
|
core1 {
|
|
cpu = <&CPU5>;
|
|
};
|
|
core2 {
|
|
cpu = <&CPU6>;
|
|
};
|
|
core3 {
|
|
cpu = <&CPU7>;
|
|
};
|
|
};
|
|
};
|
|
|
|
CPU0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a15";
|
|
reg = <0x0>;
|
|
};
|
|
|
|
CPU1: cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a15";
|
|
reg = <0x1>;
|
|
};
|
|
|
|
CPU2: cpu@2 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a15";
|
|
reg = <0x2>;
|
|
};
|
|
|
|
CPU3: cpu@3 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a15";
|
|
reg = <0x3>;
|
|
};
|
|
|
|
CPU4: cpu@100 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
reg = <0x100>;
|
|
};
|
|
|
|
CPU5: cpu@101 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
reg = <0x101>;
|
|
};
|
|
|
|
CPU6: cpu@102 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
reg = <0x102>;
|
|
};
|
|
|
|
CPU7: cpu@103 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
reg = <0x103>;
|
|
};
|
|
};
|
|
|
|
===============================================================================
|
|
[1] ARM Linux kernel documentation
|
|
Documentation/devicetree/bindings/arm/cpus.txt
|